***********************************************************************************************
For ethernet host PC set it to 192.168.1.123 subnet mask: 255.255.255.0
or set it to 10.10.10.1 subnet mask: 255.255.255.0 for the alternate IP
So the ip is within range of the target ip

./mesaflash --device 7i92 --addr 10.10.10.10 --readhmid  <-- Defaule address stored in EEPROM
./mesaflash --device 7i92 --addr 192.168.1.121 --readhmid <-- Default ip address
./mesaflash --device 7i92 --addr 10.10.10.10 --write bitfilename.bit

sudo ./mesaflash --device 7i80 --addr 10.10.10.10 --readhmid  <-- Defaule address stored in EEPROM
sudo ./mesaflash --device 7i80 --addr 192.168.1.121 --readhmid <-- Default ip address
sudo ./mesaflash --device 7i80 --addr 10.10.10.10 --write bitfilename.bit

***********************************************************************************************

To Write a bitfile to the 7I90 with parallel port:
sudo ./mesaflash --device 7i90 --epp --addr 0x378 --readhmid  
ssudo ./mesaflash --device 7i90 --epp --addr 0x378 --write bitfilename.bit 
sudo ./mesaflash --device 7i90 --epp --addr 0x378 --write /home/tom/linuxcnc/configs/Sherline/Bitfiles/7i90/SVST2_4_7I47S_TLP_72.BIT 

./mesaflash --device 7i90 --epp --addr 0x378 --write /home/tom/linuxcnc/mesa/7i90/configs/hostmot2/7i90_epp_justio.bit

To Write a bitfile to the 7I90 with spi:
sudo ./mesaflash --device 7i90 --spi --addr /dev/spidev0.0 --readhmid
sudo ./mesaflash --device 7i90 --spi --addr /dev/spidev0.0 --write 7i90_spi_svss6_8.bit 
sudo ./mesaflash --device 7i90 --spi --addr /dev/spidev0.0 --write /home/tom/linuxcnc/configs/Sherline/Bitfiles/7i90/SVST2_4_7I47S_TLP_72.BIT 





To Write a bitfile to the 6I24:


GIT MESAFLASH:
************************************
https://github.com/jethornton/mesaflash
git clone https://github.com/jethornton/mesaflash.git
Quickstart:

MesaFlash depends on the libpci-dev, to install it:
sudo apt install libpci-dev

You may need to install git first:
sudo apt install git

Clone MesaFlash:

git clone https://github.com/jethornton/mesaflash.git

From the top level directory, switch to the source directory:
cd mesaflash

In the source directory to build MesaFlash:
make

To get command line syntax from a local make:
./mesaflash --help

To build and install MesaFlash:

sudo make install

To run an installed MesaFlash:
mesaflash --help