#robotics Logs
May 13 2014
#robotics Calendar
07:07 Tom_itx rue_more, get a unifi
07:11 GuShH [21:43] rue_more: GuShH, !#$%@$^&@ <<<< is that a rue, swearing?
07:11 ShH g
08:18 GuShH why the heck are UPN profiles so expensive
08:19 GuShH why is it cheaper to buy 2 equally sized L profiles and weld them together, than an equivalent UPN channel?, is it another steel, another process?
08:20 GuShH I thought it was always a matter of weight with mild steel, you paid what it weighs...
08:20 GuShH damn ass beams.
08:21 GuShH I know two Ls are not exactly the same, profile wise, but still... it weighs the same by comparison
09:12 GuShH bah got some scrap cuts, might be enough for a press.
09:14 GuShH going to have a fixed set of beams and a moving set, with two big bolts to hold them in place
09:29 rue_more if you cut the two L's apart after you weld them, you can have a slot down the middle for a lock bolt
09:36 GuShH rue_more: why a slot? I thought evenly spaced holes was the idea here
09:37 GuShH I thought I had some UPN but it's actually two Ls welded together! eek.
09:38 rue_more its up to you!
09:38 GuShH what is!
09:39 GuShH one is twisted.
09:39 GuShH I'ma go get the bottle jack first, then I'll see.
09:39 rue_more making a press?
09:39 GuShH 4T is plenty enough for my needs
09:39 GuShH a small one.
09:39 rue_more I need to do that too
09:40 GuShH I don't like hammering on bearings and such
09:40 rue_more maybe I should just make it a tabletop one
09:40 GuShH I use spacers on the inner race, but it still feels bad.
09:40 rue_more I dont have room for something *else* free standing
09:40 GuShH if you have steel and a big jack, make a floor one.
09:40 GuShH oh
09:40 GuShH I only have enough steel for a small one.
09:40 GuShH and I might make it so it's bolt together.
09:41 GuShH the shear force on a M10 is way bigger than 4T isn't it?
09:41 GuShH grade 8
09:42 rue_more not sure
09:42 GuShH http://www.blacksfasteners.co.nz/assets/BoltShearCapacity_14-15.pdf
09:42 GuShH hrm
09:44 rue_more 4000N = 400kg
09:44 rue_more 4kN = 400Kg
09:44 rue_more 51kN = 5100kg
09:44 GuShH from what I found on other sources it's about 4 tons (conservative, not maximum)
09:45 GuShH 4.7 maximum or so
09:45 GuShH ...so either use multiples or use something bigger
09:45 rue_more 5.6 ton
09:46 GuShH I don't think I'll be able to push this to over a ton...
09:46 e_more wonders what HSS woul
09:46 GuShH but it might be fun to find out
09:46 rue_more you have 4 pins tho
09:46 GuShH because let's face it the steel profiles are much thinner
09:46 GuShH like 3mm
09:46 rue_more so the deck would effectivly be 20 tonnes
09:46 GuShH maybe 6mm portions with the two together
09:47 GuShH I'm shooting for 4T, assuming the chinese bottle jacks actually get to 4T
09:47 GuShH I don't think I need more than 1T though
09:47 GuShH practically speaking.
09:47 rue_more them m10 is more than ok
09:47 GuShH I can use M12 or M14 for the "pins"
09:47 rue_more but M10 is collectivly 20 tones
09:47 GuShH we'll see, I only plan on buying the springs and the jack.
09:48 rue_more I can see the argument for interplaced plate hinges
09:48 rue_more the accumulated sheer force must be crazy
09:49 GuShH I'm not sure those chinese floor presses can actually do 20T without bending
09:49 GuShH I bet most of the time people don't even use them at over 1-2T
09:49 rue_more I bet they bet that too
09:49 GuShH based on the pictures I've seen, they're terrible.
09:50 GuShH http://img.tapatalk.com/d/13/12/22/thumbnail/ybusymaq.jpg
09:50 GuShH that's new out of the box.
09:53 rue_more haha
09:53 rue_more it'll straighten itself out?
09:53 GuShH LOL
09:53 GuShH "needs to break in"
09:54 rue_more heh
09:54 GuShH I'd much rather spend the money on the raw materials and make my own.
09:54 GuShH than buy that.
09:54 rue_more not that one can tell by looking, but that metal looks really thin
09:54 GuShH it seems that way
09:55 GuShH http://img.tapatalk.com/d/13/12/22/thumbnail/2a7e4esy.jpg
09:55 GuShH http://i527.photobucket.com/albums/cc353/shadowdog500/f9b2bf5b7feda11996a9d5c431090bbf_zps2d3ced64.jpg
09:55 GuShH http://i527.photobucket.com/albums/cc353/shadowdog500/d26123ce586d04497e5ee3426c1aeefa_zpsda8104a6.jpg
09:55 GuShH terrible, terrible quality.
09:56 rue_more ohh its not load bearing
09:56 rue_more one of those
09:56 GuShH H frame
09:56 GuShH A frame is more complicated
09:57 e_more thinks for a
09:57 rue_more arg, every time I click off to the side a button comes up and takes me to a pie
09:58 GuShH It's mostly made out of UPN and square tubing + L for the feet
09:58 GuShH I could order some of that but I'm trying to use what I have.
09:58 rue_more my first grief would be it not staying parallel as it forced up
09:59 GuShH http://i1206.photobucket.com/albums/bb460/alancamby/press/2011079.jpg
09:59 GuShH a converted one
09:59 GuShH I'm not sure if the bottle jacks can function like that
09:59 GuShH without damaging, but maybe so.
09:59 rue_more I was gonna say...
10:00 rue_more oh they redid the jack too
10:00 GuShH how
10:00 GuShH "Ive found several presses modifies online to have an inverted bottle jack mounted to the top support. This eliminates the side to side, foward back slop. It also allows the use of the screw jack in the top of the bottle jack so you can adjust it to meet the work before even pumping the handle. you can also remove the screw jack from the top of the ram and put in custom attachments. one additional thing is that you can drill and
10:00 GuShH tap the bottom of the jack and put in a pressure gauge to see how hard you are pressing."
10:00 rue_more next image, welded a line to it
10:01 GuShH that one seems more sturdy, the UPN are bigger
10:01 rue_more I didn't think the area on those was impressive
10:01 GuShH that's expensive in 6 meter lengths when new
10:01 GuShH he probably spent more on it than it was worth he
10:01 GuShH heh
10:02 GuShH they're 250 bucks here new, and I don't have space for that anyway.
10:02 GuShH 150 or 190 usd in HF over at the US
10:02 GuShH http://i1206.photobucket.com/albums/bb460/alancamby/press/2011078.jpg
10:02 GuShH huh what's that
10:03 GuShH for the oil? but what's the reasoning
10:03 rue_more what I said
10:03 rue_more oooh the resinvoir is upside down
10:03 rue_more so it would cavitate
10:03 rue_more I thought it was a pump
10:03 GuShH that's too much trouble.
10:03 GuShH but those are some big ass UPNs
10:03 GuShH that thing is heavy.
10:04 rue_more I gotta go now
10:04 GuShH the newer stuff seems worse quality
10:04 GuShH haha "michelin" branded jack... all chinese.
10:55 GuShH Tom_itx: this guy found a new, novel way to polish rods http://i.imgur.com/XRFDp7i.gif
11:48 Hyratel1 GuShH, that's why you want low stall/clutching torque on such equipment
11:56 GuShH Hyratel1: nope, that's why you don't let retards inside a machine shop.
11:56 GuShH usually a foot pedal is used, but can be locked for long operations
11:57 GuShH one problem there is the operator left the machine unattended, and the other problem is they let a retard in the shop.
11:57 Hyratel1 ah
11:59 GuShH Hyratel1: that's nothing compared to what can happen, specially with bigger lathes. it's not pretty
11:59 Hyratel1 I can only imagine <.<'
11:59 GuShH you can look it up
11:59 ShH
12:00 GuShH how else can you know :p
14:10 Hyratel1 this is why you don't use load resistors for fan speed control https://dl.dropboxusercontent.com/u/33593534/images/photos/DSCN2191-half.jpg
15:06 GuShH Hyratel1: lawl
15:07 GuShH was it designed by someone from #reprap?
15:07 Hyratel1 no idea
15:07 GuShH because they sure love their pcb resistors.
15:07 GuShH but they keep wondering why their FR4 bends.
15:07 ShH chuc
15:09 Hyratel1 this sure ain't fr4
15:10 Hyratel1 in fact, I'll hazard a guess and say it's a ceramic substrate
15:13 Hyratel1 GuShH,
15:31 GuShH hmm
15:31 GuShH well they use regular FR4 for "heatbeds"
15:32 GuShH or hotbeds, yeah hotbed.
15:32 GuShH of course it warps.
15:32 GuShH they're pushing something around 15-20A through them.
15:43 Hyratel1 6_o
15:43 Hyratel1 uh ... huh
15:44 GargantuaSauce eh, it's fine sandwiched between metal and the glass bed
18:31 GuShH GargantuaSauce: it bends anyway, including the thin glass they use.
18:32 GuShH rue_more: assholes didn't have any bottle jacks, but they were advertised on their site...
18:33 GuShH plus the frames are never actually square, I think they use cardboard squares... or those $2 plastic ones.
19:34 rue_more you dont have an auto shop with bottle jacks/
19:34 rue_more ?
19:35 Tom_itx that's like manual labor
19:36 Tom_itx who does that anymore?
19:38 rue_more Man?el down the street, he has a shop
19:40 rue_more I"m excited, I have to dig perk holes for the new septic system
19:41 Tom_itx wtf is a perk hole?
19:41 Tom_itx i know what laterals are
19:42 GuShH rue_more: hm?
19:42 GuShH no, this place had a good deal on the 4T ones, hence why I went, but they turned out to have none on that store.
19:42 GuShH I can buy one anywhere... but for a higher price.
19:43 GuShH and who gets excited about septic systems in general?
19:44 Tom_itx one step better than an outhouse
19:45 rue_more its a test hole for checking drainage where your gonna put a field
19:45 GuShH can I poop in it?
19:45 rue_more eeeeeew :)
19:45 GuShH just put a toilet on top of the hole, done.
19:46 GuShH damn it... the live center I wanted just went up in price, again.
19:46 Tom_itx buy it now before it goes up again
19:46 Tom_itx rue_more we know about your drainage
19:46 Tom_itx it's all rock underneath
19:47 Tom_itx sh** goes downhill
19:48 rue_more accept after being int eh septic tank mine is pumped uphill cause of (long explination os stupidity)
19:49 GuShH nope
19:49 GuShH I refuse to feed dipshits.
19:49 GuShH what, you pump poop up hill?
19:49 GuShH is that a sport?
19:49 Tom_itx must be a canadian thing...
19:50 GuShH their trees have faucets, so... it wouldn't surprise me.
20:49 GargantuaSauce fuuck
20:50 GargantuaSauce i am trying to remove the motor from this wheelchair gearbox
20:50 GargantuaSauce and the setscrew on the worm gear seems to have had its head clipped off
20:50 Tom_itx time to drill it out?
20:51 GargantuaSauce guess so
20:51 Tom_itx drill small and try an easyout
20:51 Tom_itx the real trick would be a left hand drill
20:51 Tom_itx those are hard to find though
20:52 GargantuaSauce this is going to be a pain to stick under my drill press
21:00 robotustra_ evening
21:01 GargantuaSauce 'lo
21:01 robotustra_ made a zero position sensor
21:01 GargantuaSauce for the eyes?
21:01 robotustra_ yes
21:02 robotustra_ now there is no need to slam
21:02 GargantuaSauce yay
21:02 robotustra_ now eyes know the exact normale position
21:04 robotustra_ http://postimg.org/image/phnzbsh2d/full/
21:05 robotustra_ now the real programming starts
21:08 GargantuaSauce cool
21:10 MrCurious seems san diego is on fire again
21:11 robotustra_ baby ....
21:11 skilz Anyone experienced with Neural Networks?
21:11 skilz Artificial Neural Networks.
21:11 GargantuaSauce a bit
21:12 robotustra_ in montreal it's only 2nd day as warm
21:12 skilz I'm using this http://leenissen.dk/fann/wp/
21:12 robotustra_ neural network is a deadlock
21:12 skilz I'm building SkyNET
21:13 robotustra_ good luck
21:13 skilz For us.mil
21:13 robotustra_ I'm happy that you'll not finish it
21:13 skilz I have investors interested to fund my research.
21:13 robotustra_ because you'll not find enough of power to make something working
21:13 robotustra_ good for you
21:14 robotustra_ I don't have investors
21:14 robotustra_ and nobody tell me what to do :)
21:14 m_itx gives robotustra_ a p
21:14 robotustra_ thanks, could give two...
21:15 robotustra_ I just spend about a $100 for wire cables ropes for all robot
21:16 MrCurious the NSA already built skynet. it will eat your puny skynet
21:16 robotustra_ http://www.ebay.com/itm/0-8MM-Wire-Rope-0-1MM-Plastic-PVC-Coating-Stainless-Wire-Rope-Cable-1MM-100M/321404146409?_trksid=p2050601.c100085.m2372&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20140211132617%26meid%3D6883540124033268277%26pid%3D100085%26prg%3D20140211132617%26rk%3D1%26rkt%3D4%26sd%3D321404146409%26clkid%3D6883541827089249948&_qi=RTM1562569
21:16 robotustra_ sure
21:16 robotustra_ byte my shiny metal ass
21:16 skilz It's processing activity @ 90 Teraflops
21:17 robotustra_ skilz, why are you telling to us this story?
21:17 skilz Because someone may be interested in joining the team?
21:17 robotustra_ you are not convinced in yourself?
21:18 robotustra_ you die in lonelyness
21:18 robotustra_ and yes, I was working with neural network a bit
21:18 robotustra_ and it's not very good direction to go
21:18 robotustra_ not for autonomous robots
21:19 skilz Why is that?
21:19 skilz It takes lots of time/trial and error to learn doesn't it.
21:19 robotustra_ because if the real network will be big enough you'll spend a lot of time just teaching it
21:20 robotustra_ so, why to teach do silly things stupid robots?
21:20 skilz It's interesting.
21:20 robotustra_ and what ayou you going to teach this network?
21:21 robotustra_ the process of teaching?
21:21 skilz To connect all computers in the world to 1 central hub and collect information and automate real time processes like traffic, flight, mining, military etc, Banking, stock exchange, medical, all controlled by 1 mind.
21:22 robotustra_ 1) computers are already connected to one hub
21:22 skilz My friend has a working prototype.
21:22 robotustra_ 2) AI is not a MIND
21:22 skilz It's an artificial mind.
21:23 robotustra_ please tell me what is mind
21:23 skilz the element of a person that enables them to be aware of the world and their experiences, to think, and to feel; the faculty of consciousness and thought.
21:24 robotustra_ you took it form dictionary
21:24 skilz a person's ability to think and reason; the intellect.
21:24 robotustra_ are you bot?
21:24 robotustra_ key word: A PERSON
21:24 robotustra_ where the person?
21:24 robotustra_ where is
21:24 skilz You can make an artificial mind
21:25 robotustra_ I'm doing it right now
21:25 robotustra_ but not on the base of neural network
21:25 robotustra_ Mind could not be built without the physical body
21:26 skilz Physical body being the hardware.
21:26 robotustra_ so you can't create AI inside computer
21:26 skilz ANYTHING is possible.
21:26 robotustra_ show me that hardware and I'll tell you how stupid your robot will be
21:27 robotustra_ you are probably 16 years old
21:27 robotustra_ and girls don't give you yet
21:27 skilz http://www-03.ibm.com/systems/au/technicalcomputing/solutions/bluegene/
21:27 robotustra_ what can you say about this picture? http://postimg.org/image/phnzbsh2d/full/
21:27 skilz ^ Hardware ;)
21:28 Hyratel1 I pulled the fan speed controller out of my car today... -> https://dl.dropboxusercontent.com/u/33593534/images/photos/DSCN2191-half.jpg ;;; https://dl.dropboxusercontent.com/u/33593534/images/photos/DSCN2192-half.jpg
21:28 robotustra_ I see only letters on the page
21:29 robotustra_ many cracks on it
21:29 robotustra_ big shunt
21:29 Tom_itx you only believe pixels?
21:30 robotustra_ Tom_itx use Ctrl+'-'
21:31 skilz robotustra_, http://www.ibm.com/software/info/television/index.jsp?cat=bluegene&item=xml/U544177H26052D17.xml
21:31 robotustra_ 404
21:31 robotustra_ computer BLUE
21:32 robotustra_ which won Kasparov in chess
21:32 robotustra_ it exists already more than 20 years
21:32 robotustra_ and still there is no skynet
21:32 robotustra_ only PRISM
21:36 robotustra_ the one artificial MIND is a dummy idea because it can be easily destroyed
21:36 robotustra_ AI should be distributed over the network
21:38 skilz It will be
21:38 skilz It's everywhere, software in cyberspace.
21:38 skilz It's one mind but where where
21:38 robotustra_ so, what is your proposal
21:39 skilz Judgment Day
21:40 robotustra_ so you are looking a team or what?
21:40 skilz Yes, looking for a team.
21:40 skilz Are you in?
21:40 robotustra_ for free?
21:41 robotustra_ or for salary?
21:41 skilz You will start off with a base salary of $500 a month which will increase over time as we attract more interest and funding.
21:42 robotustra_ I already have 800 per week
21:42 robotustra_ so, you have not enough money for this project
21:42 skilz Yes but I am a small company. It is just a project you can do on the side in your own time.
21:43 robotustra_ but you can't pay cash
21:43 skilz I want to take out a $500,000 loan from my bank.
21:43 robotustra_ that's the problem for me
21:43 skilz Just need to show them that I can make money on this.
21:43 GargantuaSauce 500 a month for what you intend to be a groundbreaking ai startup
21:44 GargantuaSauce good luck with that.
21:44 robotustra_ yeah
21:44 skilz What are you asking?
21:44 robotustra_ at least 1000 per week
21:44 skilz How about $5000 now, then more as I see your work?
21:45 robotustra_ no
21:45 GargantuaSauce i'd do $4k and 50% equity
21:45 skilz GargantuaSauce, You interested?
21:45 GargantuaSauce no
21:45 robotustra_ the aim is not clear
21:45 GargantuaSauce one startup is enough
21:46 robotustra_ GargantuaSauce: what startup are you talking about?
21:46 robotustra_ your hexapod?
21:46 GargantuaSauce one i am not going to describe
21:47 skilz To build a smart, self functioning AI system that can think and learn itself and then to build bots and connect them to that system as so they can upload/download information/orders and carry them out and as they learn things they share this information over the ANN.
21:47 robotustra_ so you are getting money from that?
21:48 Tom_itx too bad kat isn't here
21:48 skilz I will be funding myself and I have friends that will generate investment leads for me, to scientists, military etc.
21:48 robotustra_ 1) the task is too abstract
21:48 robotustra_ 1) ANN is not a good choise
21:48 robotustra_ 2)
21:48 robotustra_ for such task
21:49 MrCurious robotustra_: http://vimeo.com/95066828
21:49 skilz Say I walk in my room and a bot sees me sitdown, it will automatically think to turn on my monitor and fetch me a drink
21:49 MrCurious cool talk about hiipster tech
21:49 skilz Things like that where they can see and think
21:49 robotustra_ skilz: are you disabled?
21:49 skilz Observe and mimic
21:49 skilz Yes
21:50 skilz No I just using it as an example.
21:51 skilz Imagine having to do nothing because you have an army of bots roaming around your house thinking what to do for you, they will cook, do your laundry, clean etc.
21:51 robotustra_ skilz: this is sstupid task for AI which is more powerful than average human's
21:51 skilz robotustra_, That's just a demo,
21:52 skilz To see if we can get it working, then we can move onto my complex things, like flight navigation and GPS mapping/targeting.
21:52 robotustra_ MrCurious niggers from microsoft?
21:52 MrCurious its hilarious
21:52 MrCurious he mocks people from belarus
21:52 MrCurious i found it a very funny talk mocking the work i do
21:53 MrCurious well, the work people who look kind of liek me do
21:53 robotustra_ Balmer roots are from belarus
21:53 robotustra_ BTW
21:53 robotustra_ ah ok
21:54 robotustra_ you mean mocking hipstar tech?
21:54 robotustra_ he can'd mock indians because they mock him physically
21:55 robotustra_ skilz: I can't spend my life for such a stupid tasks, even for 1000/week
21:56 robotustra_ MrCurious stand up from microsoft
21:56 MrCurious :D
21:57 robotustra_ you knows, it looks like only niggers has sense of humor in america
21:58 robotustra_ and yeas, russians
21:58 robotustra_ canadians - don't
21:58 MrCurious meanwhile back in soviet canada...
22:07 GuShH robotustra_: you don't get to say "nigger" unless you're black, and even then they use "nigga"
22:08 GuShH but in a non derrogatory way, most of the time.
22:08 GuShH Anyway Ballmer is a cocaine riddled good for nothing fat ass.
22:09 robotustra_ GuShH: russians can use nigger because thay don't put negative meaning in it
22:09 GuShH errr
22:09 GuShH how about no?
22:10 GuShH your equivalent is most likely not the same.
22:11 robotustra_ russians didn't bring them to america as slaves
22:11 robotustra_ for me "nigger" is gist a rase
22:11 GuShH ?????
22:11 robotustra_ is just
22:12 robotustra_ negroid type of people
22:12 GuShH nigger is not a race per se.
22:12 robotustra_ originating from africa
22:12 robotustra_ negroid
22:12 robotustra_ ok
22:12 GuShH Look I'm whiter than tits, but I think it's wrong.
22:13 robotustra_ I don't care what is wring from your point of view. I see things different
22:13 GuShH Most people would agree with my point of view though
22:14 robotustra_ many things you are saying about are wrong from my point of view
22:14 robotustra_ and what of it? I'm in minority?
22:14 GuShH Might be because you are a bigot
22:14 robotustra_ what a shame
22:15 GuShH One of these days a "negroid" will make a brochette out of your ass if you are not careful.
22:15 GargantuaSauce have you ever actually used this terminology (and the excuse) in the presence of a black person?
22:15 GargantuaSauce or, anyone with a basic level of decency?
22:15 robotustra_ only small amount of people think that "negroid" is a bad word
22:15 GargantuaSauce cause i guarantee it won't fly
22:15 GuShH GargantuaSauce: nigga please!
22:15 ShH r
22:15 GuShH I couldn't resist!
22:16 GuShH he will fly :)
22:16 robotustra_ niggers call each other "dogs"
22:16 robotustra_ hey dogs
22:17 robotustra_ and they have big lips and big dicks
22:17 robotustra_ good for them
22:17 robotustra_ and that's it
22:17 GuShH what the fuck is going on.
22:18 robotustra_ relax, I'm just trolling
22:19 robotustra_ I told that nobody except niggers and russians has sense of humor in America
22:19 robotustra_ in south america too
22:19 GuShH russian humor must be similar to german humor
22:19 robotustra_ not exactly
22:20 robotustra_ german human is a bit different
22:20 robotustra_ the more stressed condition in the country - the less humor have people
22:21 robotustra_ germany is quite stressed country
22:21 robotustra_ I noticed ont thing on youtube statistics
22:21 GuShH oh and russia isn't...
22:22 GuShH happy fucking 18 kid, here's a bottle of vodka and your grandpa's revolver.
22:22 robotustra_ russia isn't
22:22 robotustra_ russia is ok
22:22 robotustra_ you wasn't there
22:22 GuShH belarus is up there in suicide rate
22:23 robotustra_ and what?
22:23 GuShH my country ranks 60 yours is 7
22:23 robotustra_ and still your level of humor is less than ours
22:24 robotustra_ all northen countries have high level of suicide
22:24 GuShH Because I don't tolerate gratuitous racism?
22:25 robotustra_ listen if I can differ people by rase it deos not mean that I'm a rasist
22:25 robotustra_ I just state the fact that people are different
22:25 GuShH There's no humor in that.
22:26 robotustra_ I didn't tell that it's a humor
22:26 robotustra_ there is a 1) humor, 2) trolling 3) sarcasm
22:26 robotustra_ I use everything
22:26 GuShH You've got a PhD on all three?
22:27 robotustra_ nope, masters only
22:27 GuShH "I combine all three into a super critical mass of hitler"
22:28 robotustra_ you know, the person who use "Hitler" already failed in discussion
22:29 GuShH You are so racist... If you ever walked near Auschwitz you'd be tempted to get it running again.
22:29 GuShH robotustra_: Why? he was a talented artist.
22:29 GargantuaSauce http://i.imgur.com/B8BR43v.jpg
22:29 robotustra_ I told you, I'm not a rasist
22:29 robotustra_ I'm an atheist
22:31 robotustra_ GuShH: how do you differ in gears?
22:31 robotustra_ by size?
22:31 GuShH wat
22:31 robotustra_ by shape?
22:32 GuShH certainly not by colour.
22:32 robotustra_ by material?
22:32 robotustra_ by applience?
22:32 robotustra_ YOU ARE A GEARIST!
22:32 GuShH I am not such thing.
22:32 robotustra_ you are
22:33 GuShH You would get murdered if you attempted to do some standup...
22:33 robotustra_ If I differ in people you call me a rasist
22:33 GuShH They would shove the microphone so high up your ass you'll be able to taste the previous guy's saliva.
22:33 robotustra_ only niggas can do good standup
22:33 robotustra_ like eddie murfy
22:33 GuShH there's only one major famous black comedian
22:33 GuShH and he sucks.
22:34 GuShH chris rock sucks, big time.
22:34 robotustra_ GuShH: Your dick-like humor is good for kids, not for me
22:34 GuShH robotustra_: eddie is long past his prime.
22:34 robotustra_ your humor is our of my age already
22:34 robotustra_ sorry
22:35 GuShH no dicks were mentioned...
22:35 GuShH that's your own fixation.
22:35 robotustra_ he was an inventor of standup
22:35 GuShH wahaha
22:35 robotustra_ or one of the
22:35 robotustra_ first
22:35 robotustra_ standupers
22:35 GuShH yeah, he put up the wall.
22:35 GuShH there's a racist joke for you.
22:36 GuShH and by wall, I clearly mean brick wall.
22:36 robotustra_ ok, I'm tired from your rasist jokes, nigga
22:36 robotustra_ see you
22:37 robotustra_ I just came to discuss robots, not niggas
22:37 GuShH so far I've only seen a poser guy with a pretended idea, you talking about "niggas" and nothing else.
22:39 robotustra_ the only poser here is you
22:39 GargantuaSauce zing
22:40 robotustra_ gong?
22:40 GargantuaSauce bang
22:41 GuShH robotustra_: says the guy that would've got his ass kicked in any social setting?
22:41 GuShH and trust me, if you were talking that much shit in a pub, you would end up in the hospital.
22:42 robotustra_ I don't go to pubs, dude
22:42 GuShH Clearly, the comfort of hiding behind your keyboard has no rival.
22:43 robotustra_ whatever you say - I don't care
22:43 robotustra_ your IQ is 1/2 of mine
22:43 GuShH Your English says otherwise.
22:43 GargantuaSauce this is getting pretty depressing man
22:44 GuShH Why don't you finish that "alien" robot of yours?
22:44 GuShH That way you'll finally have a friend.
22:44 robotustra_ I'm finishing
22:45 GuShH Deep inside, you meant to say "I'm finished".
22:45 robotustra_ and my english is ok for russian
22:46 GuShH Belarusian.
22:46 GuShH Lesser than Russian.
22:46 robotustra_ exactly
22:47 robotustra_ finally you's learned something useful
22:47 robotustra_ 'd
22:47 ShH eyer
22:48 GargantuaSauce would you knock this shit off
22:48 robotustra_ GargantuaSauce: :)
22:48 robotustra_ do you fill uncomfortable?
22:49 GargantuaSauce http://xn--d-bga.su/troll.png
22:49 GuShH Are you drunk?
22:49 rue_more robotustra_, your russian?
22:49 robotustra_ rue_more: as GuShH told - belarusian
22:50 robotustra_ GuShH: I don't consume solvents for varnish
22:50 GuShH I'll take that as a yes.
22:51 robotustra_ rue_more: I'm slavic
22:51 robotustra_ russian speaking belarus
22:53 robotustra_ genetically about 75% of belarussian and 25% russian
22:56 GuShH he must be the webmaster of racist-jokes.info
22:57 GuShH robotustra_: goodnight.
22:59 robotustra_ buy
23:00 robotustra_ let's just elliminate men as a gender
23:11 robotustra_ GargantuaSauce: are you on kickstarter?