#linuxcnc Logs

Nov 29 2024

12:55 AM Deejay: moin
03:24 AM lcnc-relay: <travis_farmer@discord> Morning
04:41 AM JT-Cave: morning
04:58 AM Tom_L: morning
06:35 AM JT-Cave: 27°F brrrr
07:00 AM JT-Cave: https://youtu.be/pLhlYm4aG6M
07:05 AM lcnc-relay: <captainhindsight_.@discord> https://linuxgizmos.com/olimex-showcases-open-source-pico2-xl-and-pico2-xxl-boards-with-rp2350b-mcu/
07:05 AM lcnc-relay: <captainhindsight_.@discord> https://linuxgizmos.com/olimex-showcases-open-source-pico2-xl-and-pico2-xxl-boards-with-rp2350b-mcu/
07:06 AM JT-Cave: hmm there's an echo in here
07:06 AM lcnc-relay: <captainhindsight_.@discord> €5-8
07:07 AM lcnc-relay: <captainhindsight_.@discord> echo how so?
07:07 AM JT-Cave: you double posted the link
07:07 AM lcnc-relay: <captainhindsight_.@discord> big_kevin420@discord ^^ new expanded pico2's
07:08 AM lcnc-relay: <captainhindsight_.@discord> let me check IRC
07:08 AM JT-Cave: https://pasteboard.co/MgYRQSpzJLxZ.png
07:10 AM lcnc-relay: <captainhindsight_.@discord> https://linuxgizmos.com/updated-olimex-showcases-development-board-design-based-on-esp32-p4-risc-v-soc/
07:10 AM lcnc-relay: <captainhindsight_.@discord> https://linuxgizmos.com/updated-olimex-showcases-development-board-design-based-on-esp32-p4-risc-v-soc/
07:11 AM lcnc-relay: <captainhindsight_.@discord> must be the bot, was posted from Discord
07:11 AM lcnc-relay: <captainhindsight_.@discord> https://linuxcnc.org/
07:11 AM lcnc-relay: <captainhindsight_.@discord> https://linuxcnc.org/
07:13 AM lcnc-relay: <captainhindsight_.@discord> botmaster alerted
07:20 AM lcnc-relay: <captainhindsight_.@discord> https://olimex.wordpress.com/2024/11/28/usb-serial-l-is-open-source-hardware-and-the-worlds-most-sophisticated-usb-to-serial-converter/ might be handy for a few here
07:20 AM lcnc-relay: <captainhindsight_.@discord> https://olimex.wordpress.com/2024/11/28/usb-serial-l-is-open-source-hardware-and-the-worlds-most-sophisticated-usb-to-serial-converter/ might be handy for a few here
07:22 AM lcnc-relay: <captainhindsight_.@discord> JT-Cave: links posted on Discord always get posted twice on Discord, once as the link as text and then immediately after as a snapshot of the link
07:23 AM JT-Cave: that's why you should leave the dark side LOL
07:24 AM lcnc-relay: <captainhindsight_.@discord> but I like all the animations that you get along with Discord
07:24 AM lcnc-relay: <captainhindsight_.@discord> and the server admins can assign members silly and entertaining roles
07:25 AM lcnc-relay: <captainhindsight_.@discord> IRC is like the grumpy old guy
07:28 AM lcnc-relay: <captainhindsight_.@discord> Matrix was also nice for the anonymity, logging and the animations
07:29 AM lcnc-relay: <captainhindsight_.@discord> I wish that IRC had more pointless yet entertaining features
08:17 AM jdh: IRC has been good enough for 35+ years.
08:27 AM lcnc-relay: <skunkworks8841@discord> Who would have thought I would need a dehumidifier in the attic...
08:28 AM lcnc-relay: <captainhindsight_.@discord> skunkworks8841@discord do any of the exhaust fans just dump into the attic space vs outdoors?
08:32 AM lcnc-relay: <skunkworks8841@discord> No. This house is 1.5 stories in the hill... I think a lot of moisture migrates into the house . It is about 60% in the attic currently. Dad really sealed the stick built parts of the house.. just not the block..
08:35 AM lcnc-relay: <captainhindsight_.@discord> skunkworks8841@discord is the block exposed to the inside areas or behind walls?
08:36 AM lcnc-relay: <skunkworks8841@discord> Exposed to the inside
08:36 AM lcnc-relay: <skunkworks8841@discord> Basement is 35%
08:37 AM lcnc-relay: <captainhindsight_.@discord> skunkworks8841@discord you could try a liquid applied water barrier
08:38 AM lcnc-relay: <skunkworks8841@discord> Sure. 20 year plan...
08:38 AM lcnc-relay: <skunkworks8841@discord> Running the split unit in dry mode to see
08:39 AM lcnc-relay: <skunkworks8841@discord> (just gets really cold then 😉
08:41 AM lcnc-relay: <captainhindsight_.@discord> it's best done on the outside, but that option has passed unless you inject below the surface
08:41 AM Tom_L: 29°F hi 45°F
08:42 AM lcnc-relay: <skunkworks8841@discord> Yah. I don't want to dig around this place. I remember dad painting tar. But for sure there isn't a barrier under the basement floor
08:42 AM lcnc-relay: <skunkworks8841@discord> This is clay country
08:48 AM lcnc-relay: <captainhindsight_.@discord> my sister had a basement wall cave in on a new home built into a hillside
08:49 AM lcnc-relay: <captainhindsight_.@discord> several ton boulder slid in from just outside and under the soil
08:49 AM lcnc-relay: <skunkworks8841@discord> Yah.. the basement is all concrete.. even the ceiling/first floor
08:50 AM lcnc-relay: <skunkworks8841@discord> (will - it has block walls)
08:51 AM lcnc-relay: <skunkworks8841@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/abIklPWdfWFzBWPhYFtBVkFY/PXL_20241129_144240154.MP.jpg
08:53 AM lcnc-relay: <captainhindsight_.@discord> looks industrial
08:54 AM lcnc-relay: <skunkworks8841@discord> Dad did some crazy stuff...
08:55 AM lcnc-relay: <skunkworks8841@discord> When the kids were worried about a storm.. I told them not to worry as the basement is a bumker
08:55 AM lcnc-relay: <captainhindsight_.@discord> what did your dad do back then for work?
08:55 AM lcnc-relay: <skunkworks8841@discord> Lol..
08:55 AM lcnc-relay: <skunkworks8841@discord> Broadcast emgineer
08:56 AM lcnc-relay: <captainhindsight_.@discord> interesting
08:59 AM lcnc-relay: <captainhindsight_.@discord> Chicago area is all clay as well
08:59 AM lcnc-relay: <captainhindsight_.@discord> and the occasional limestone bedrock near the surface
09:00 AM lcnc-relay: <skunkworks8841@discord> Yah.. they ran into sandstone
09:04 AM lcnc-relay: <huursabg@discord> can i get axial support on the axis by adding shaft collar on both sides so when it pulls the axis it hits the collars
09:04 AM lcnc-relay: <huursabg@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/qYXxWmLSDgHfCuxyjSqBocjf/image.png
09:04 AM lcnc-relay: <huursabg@discord> the bearing is made for radial and axial loads
09:05 AM lcnc-relay: <captainhindsight_.@discord> huursabg@discord did you buy that shaft or fabricate it?
09:06 AM lcnc-relay: <huursabg@discord> its a sfk0802 ballscrew from aliexpress
09:06 AM lcnc-relay: <huursabg@discord> i reduced the backlash from 150 to 30-35 microns by adding radial support
09:06 AM lcnc-relay: <captainhindsight_.@discord> yeah, off the shelf collars or turn some yourself
09:06 AM lcnc-relay: <huursabg@discord> but want to try to improve it
09:07 AM lcnc-relay: <captainhindsight_.@discord> is that the motor shaft just to the left?
09:07 AM lcnc-relay: <huursabg@discord> ye
09:07 AM lcnc-relay: <captainhindsight_.@discord> i don't see a coupling
09:08 AM lcnc-relay: <huursabg@discord> thats just to visualize
09:08 AM lcnc-relay: <captainhindsight_.@discord> have to see more to say how to properly constrain that bearing and screw
09:08 AM lcnc-relay: <zincboy_ca_on@discord> If that is a single deep groove bearing then shaft collars won't help much. Usually you would use a back to back pair of 35deg angular contact bearings.
09:09 AM lcnc-relay: <huursabg@discord> btw can i use a shaft coupler made from aluminum instead of collar as its basically impossible to get a collar on the inside so the coupler being longer i could reach to tighten it
09:09 AM lcnc-relay: <huursabg@discord> and yes there is space to have 2 couplers fit in, they are short ones
09:10 AM lcnc-relay: <huursabg@discord> zincboy_ca_on@discord: idk what exactly the bearings are, i bought this FF10 meant for ballscrews holding, it should do axial and radial
09:10 AM lcnc-relay: <huursabg@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/lGzGpfVnZwzMhDMBaJiojgcy/products-pillow_block_bearing_unit_ff.png
09:11 AM lcnc-relay: <zincboy_ca_on@discord> Nope. Those are radial only.
09:11 AM lcnc-relay: <huursabg@discord> but it comes with this thing , meant to lock the end of the screw
09:11 AM lcnc-relay: <huursabg@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/QjCcaCSGahQLJkPaQGezPzsH/image.png
09:12 AM lcnc-relay: <zincboy_ca_on@discord> That is just to keep it from falling off. It is not meant for precision axial locating.
09:12 AM lcnc-relay: <huursabg@discord> demn
09:13 AM lcnc-relay: <huursabg@discord> is the FK both loads?
09:13 AM lcnc-relay: <huursabg@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/zKqmcCumnXorxhButvwbUoKY/products-pillow_block_bearing_unit_fk.png
09:14 AM rdtsc_away is now known as rdtsc
09:14 AM lcnc-relay: <zincboy_ca_on@discord> That's the one. And you need the precision nut to lock the inner races and set the preload.
09:15 AM lcnc-relay: <huursabg@discord> can i use collar instead of the nut
09:15 AM lcnc-relay: <zincboy_ca_on@discord> Normally you have a shoulder turned on the screw, the bearing surface and then a threaded section with the nut.
09:16 AM lcnc-relay: <zincboy_ca_on@discord> A collar might work but I can see you having issues holding it in place and keeping the preload on the bearing.
09:16 AM lcnc-relay: <huursabg@discord> ye but these are 8mm ballscrews with 6mm ends and the FK for that diameter is hard to find and expensive so if i could do it cheaper would be good
09:16 AM lcnc-relay: <captainhindsight_.@discord> I used to post a whole lecture series on ballscrew fixity
09:16 AM lcnc-relay: <zincboy_ca_on@discord> Cheap != precision.
09:16 AM rdtsc: nut should have a setscrew in it to lock it into place - it is the nut which tensions the FK bearings and removes the axial slop
09:17 AM lcnc-relay: <huursabg@discord> the FF10 is 3 euro, FF for 6mm is like 50-60 and not because its better, its just obscure thus expensive
09:17 AM lcnc-relay: <captainhindsight_.@discord> https://www.linearmotiontips.com/choose-end-fixity-conditions-screw-applications/
09:17 AM lcnc-relay: <captainhindsight_.@discord> https://www.linearmotiontips.com/choose-end-fixity-conditions-screw-applications/
09:17 AM lcnc-relay: <captainhindsight_.@discord> https://www.machinedesign.com/mechanical-motion-systems/linear-motion/article/21828146/the-importance-of-ballscrew-end-fixity
09:17 AM lcnc-relay: <captainhindsight_.@discord> https://www.machinedesign.com/mechanical-motion-systems/linear-motion/article/21828146/the-importance-of-ballscrew-end-fixity
09:18 AM lcnc-relay: <huursabg@discord> captainhindsight_.@discordmine is fixed-free
09:19 AM lcnc-relay: <zincboy_ca_on@discord> Even the cheapest of the cheap machines that use ball screws don't try to use a collar to keep them fixed.
09:19 AM lcnc-relay: <huursabg@discord> i know but im using obscure ballscrew diameter and parts for them are heavily overpriced
09:20 AM lcnc-relay: <zincboy_ca_on@discord> Yup. Welcome to using non-standard parts. There are no shortcuts.
09:20 AM lcnc-relay: <huursabg@discord> does having no axial support damage the ballscrew nut in any way
09:21 AM lcnc-relay: <zincboy_ca_on@discord> No but your servo might get unhappy since it would be taking part of the load. You just won't have any precision so why even use ballscrews at that point.
09:22 AM lcnc-relay: <huursabg@discord> but my backlash is 30 micron and positioning 10-20
09:22 AM lcnc-relay: <huursabg@discord> not too bad for just radial
09:22 AM lcnc-relay: <zincboy_ca_on@discord> For now. It won't last and neither will your bearings.
09:23 AM lcnc-relay: <huursabg@discord> demn
09:24 AM lcnc-relay: <captainhindsight_.@discord> just wait until you start slamming the screws around
09:26 AM rdtsc: JT, just got Flex 1.1.0 from APT on the Rpi :)
09:26 AM Tom_L: he must have uploaded things then... cool
09:29 AM rdtsc: you know JT... faster than a double-expresso jackrabbit :)
10:00 AM lcnc-relay: <huursabg@discord> zincboy_ca_on@discord: does that damage the stepper motor
10:00 AM lcnc-relay: <die_limonade@discord> yes, since the bearing in the steppers are not designed for these loads
10:01 AM lcnc-relay: <die_limonade@discord> at least in the long run
10:03 AM lcnc-relay: <huursabg@discord> well i found FK 6mm for like 14$ on aliexpress, better than the 50 euro in europe
10:06 AM lcnc-relay: <die_limonade@discord> you should be cautious with these cheap bearing blocks. sometimes they use radial ball bearings instead of angular contact ones...
10:07 AM Tom_L: better or cheaper?
10:07 AM lcnc-relay: <huursabg@discord> die_limonade@discord: they are the same as the ones in europe, the 50 euro is to cover the import and how obscure they are
10:11 AM lcnc-relay: <die_limonade@discord> not necessarily...
10:32 AM lcnc-relay: <huursabg@discord> die_limonade@discord: you seriously think a european company made FK06 supports?
10:38 AM lcnc-relay: <zincboy_ca_on@discord> It is more that you get the level of quality you pay for (or they think they can get away with) on aliexpress
10:41 AM Tom_L: but but they say...Explore the precision engineering of the FK06....
11:36 AM lcnc-relay: <captainhindsight_.@discord> https://guanying20170312.en.made-in-china.com/product/XwhaQFqCyjUV/China-Fk06-FF6-Ball-Screw-End-Support-Unit.html only 50 cents US
11:36 AM lcnc-relay: <captainhindsight_.@discord> https://guanying20170312.en.made-in-china.com/product/XwhaQFqCyjUV/China-Fk06-FF6-Ball-Screw-End-Support-Unit.html only 50 cents US
11:36 AM lcnc-relay: <captainhindsight_.@discord> huursabg@discord currently you have Floating-Free
11:37 AM JT-Shop: 3 more 1" holes to drill but first a nap is required
11:38 AM lcnc-relay: <huursabg@discord> captainhindsight_.@discord: i know i can get them for even cheaper from alibaba but given how cheap such things are, they will have an MOQ of definitely more than 1 so i had to go through aliexpress
11:39 AM lcnc-relay: <captainhindsight_.@discord> I have had some Chinese CNC routers show up with only the spring tension of the couplings holding the bearings in place
11:40 AM lcnc-relay: <huursabg@discord> for more complex items like that sure but cmon its a bearing support, theres no way they fail at that and i ordered from a shop with like 1000 good reviews so it should be all good
11:42 AM lcnc-relay: <captainhindsight_.@discord> https://i.imgur.com/ANGGwVM.jpg for example
11:42 AM lcnc-relay: <captainhindsight_.@discord> https://i.imgur.com/ANGGwVM.jpg for example
11:42 AM lcnc-relay: <huursabg@discord> captainhindsight_.@discordthe stepper motor used to slightly twist at its ends before adding radial support, could that be the reason why
11:44 AM lcnc-relay: <captainhindsight_.@discord> the fasteners were "red oxide" treated
11:45 AM lcnc-relay: <captainhindsight_.@discord> the bearings sounded like they were packed in gravel
11:46 AM lcnc-relay: <captainhindsight_.@discord> others had detents
11:47 AM lcnc-relay: <huursabg@discord> it all depends the shop you got it from, some chinese companies do deliver on quality
11:48 AM lcnc-relay: <captainhindsight_.@discord> was OK after rebuilding https://i.imgur.com/zsxG2mT.jpg
11:48 AM lcnc-relay: <captainhindsight_.@discord> was OK after rebuilding https://i.imgur.com/zsxG2mT.jpg
11:49 AM lcnc-relay: <huursabg@discord> whats the bending of the z axis
11:49 AM lcnc-relay: <huursabg@discord> im gettin like 100 microns on my mill
11:51 AM lcnc-relay: <captainhindsight_.@discord> "the bending of the z axis" ? deflection in which direction with how much load?
11:53 AM lcnc-relay: <captainhindsight_.@discord> https://i.imgur.com/hQsE2h7.jpg used for non-contact or light contact with maybe a 1Kg of load
11:53 AM lcnc-relay: <captainhindsight_.@discord> https://i.imgur.com/hQsE2h7.jpg used for non-contact or light contact with maybe a 1Kg of load
11:54 AM Tom_L: hope they fix this double posting soon
11:54 AM * Tom_L turns Full Duplex off
11:54 AM lcnc-relay: <captainhindsight_.@discord> ah, just ignore them
11:56 AM lcnc-relay: <huursabg@discord> captainhindsight_.@discord: Well just a push with your hand whatever newtons that is
11:57 AM lcnc-relay: <huursabg@discord> +downward
12:05 PM -!- #linuxcnc mode set to +v by ChanServ
02:09 PM * JT-Shop takes 5 before drilling the last off center 1" hole
02:18 PM bjorkintosh: https://youtu.be/XLSPw4ScQWM?list=RDXLSPw4ScQWM
02:32 PM Tom_L: JT-Shop, working on the sub pannels?
02:32 PM JT-Shop: working on the mounts for the remote stations
02:38 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/XuTkKcmnuaLdnJetgjbAHZVj/1000002632.jpg
02:39 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/qXcFfmRRILomVySHtZTdMRWE/1000002633.jpg
02:41 PM Tom_L: nice
02:41 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/jIQMLwTCOnCvhsHegvrVXzkB/1000002634.jpg
02:43 PM Tom_L: those get bolted to the floor too i assume
03:02 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/ASxpnhKDqKryuFCABDGPdqJH/1000002625.jpg
03:02 PM xxcoder: nice
03:02 PM Tom_L: yup
03:02 PM JT-Shop: that's one that's there now
03:03 PM Tom_L: yeah
03:03 PM Tom_L: you gonna pull new wires ther or use those?
03:04 PM JT-Shop: that's just an estop
03:04 PM Tom_L: oh
03:04 PM JT-Shop: all the control wires will be new and go to my control panel
03:05 PM JT-Shop: I'll remove all the existing stuff when I'm done
04:03 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/rQKHKLfBynonYkHmethoRpVR/1000002635.jpg
04:03 PM roycroft: the recurring theme of my move has manifest itself again
04:03 PM roycroft: everything at the new place is a wee bit smaller than at the old place
04:03 PM roycroft: today was the garden shed
04:04 PM roycroft: and almost everything fits, but there's a big diesel heater that does not
04:04 PM roycroft: it's something on my list to dispense with anyway
04:04 PM roycroft: but for now it gets to sit outside
04:04 PM roycroft: fortunately there is no rain or snow in the forecast for the next week, so i have some time to deal with it
04:24 PM * JT-Shop should start taking apart the drivers side front suspension on the C3
04:26 PM * roycroft is about to go work on the door for his shed, now that he can use his shop machines
04:26 PM JT-Shop: that's got to be a good feeling to be able to use your shop machines
04:28 PM roycroft: it really is
04:28 PM roycroft: for months i've had things to do that i either could not do or would be very difficult to do without my shop
04:28 PM roycroft: now i can finally get going
04:28 PM xxcoder: awesome
04:29 PM roycroft: i just got a rotary axis for my laser today
04:29 PM lcnc-relay: <sodakaustik@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/VMIspgaJVUMVsJHUnLjPgqSg/IMG_20241128_233702_740.jpg
04:29 PM roycroft: it was on a black friday special, and since i'm about to get the laser enclosure done i wanted the rotary attachment, as it requires some remodeling of the enclosure
04:30 PM roycroft: i figured i should do that now, while i was still building the thing
04:30 PM roycroft: i also ordered a 1064nm laser head, so i can etch metals other than stainless steel
04:30 PM roycroft: that was also on sale for a really great price
04:32 PM * roycroft wanders off to play with his jointer, thicknesser, and table saw
04:33 PM rdtsc: be very careful with reflections at that wavelength - can't see it at all
04:34 PM xxcoder: he has enclosure
04:37 PM rdtsc: oh good. I run a little 10W blue laser every now-and-then, and that's pretty tame with wood, not so much with other materials
04:43 PM roycroft: yes, and i have verified that my glasses are rated for that wavelength as well
04:44 PM roycroft: 1064nm doesn't work with wood, so i'll be using the blue diode most of the time
04:57 PM rdtsc: those "fiber lasers
04:58 PM rdtsc: " with the scanning galvo head - boy those are nice, but pricey
04:59 PM rdtsc: the missus said "can't you make one for like $10?" No, sorry honey, the laser and the head *are* the expensive bits
05:04 PM xxcoder: seems the guy behind the cnc cookbook bob have died
05:05 PM xxcoder: the company is trying to find gwizard source code, and will move server
05:24 PM JT-Shop: https://www.cnccookbook.com/blog/sad-news/
05:30 PM bjorkintosh: oh shit. that's sad.
05:31 PM xxcoder: yeah. sounds like he didnt plan for any sudden death
05:31 PM xxcoder: so his company might not be able to keep going
05:31 PM JT-Shop: not many people plan on death
05:31 PM xxcoder: yeah
05:33 PM Tom_L: wow
05:34 PM bjorkintosh: no.
05:37 PM xxcoder: seems a company finally made classic xmas lights but led. https://www.seasonsreflection.com/vintaglo
05:37 PM xxcoder: led ones have always been off
05:38 PM JT-Shop: tomorrows plan is to cut 4 mount plates on the plasma cutter
05:38 PM Tom_L: finished greasing the mill a bit
05:38 PM Tom_L: while i wasn't needing it...
05:39 PM JT-Shop: got started taking the drivers side of the front suspension apart on the C3
05:54 PM Tom_L: that side shouldn't be as bad
05:55 PM JT-Shop: well it helps to know what to do lol
05:55 PM Tom_L: true that
05:56 PM Tom_L: i considered doing a thread mill op but i don't think i will
05:59 PM * JT-Shop calls it a day
06:00 PM Tom_L: it would take quite a few vars to do it
06:02 PM lcnc-relay: <skunkworks8841@discord> Our turkey day was today.. I sure do like a convection oven for cooking turkeys.. Golden brown and look like a norman rockwel painting...
06:03 PM xxcoder: I might be able to do something similiar next time lol. I got nice "airfry" convection oven
06:04 PM lcnc-relay: <skunkworks8841@discord> lol the new buzz term for convection oven is 'air fry'
06:04 PM xxcoder: yup
06:04 PM lcnc-relay: <skunkworks8841@discord> that wasn't this year.. but it was similar
06:04 PM lcnc-relay: <skunkworks8841@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/qyUaebEJQWEkqEEzYSNFExId/PXL_20231123_192412859.jpg
06:04 PM xxcoder: looks very nicely browned. wheres my share
06:04 PM lcnc-relay: <skunkworks8841@discord> lol
06:05 PM lcnc-relay: <skunkworks8841@discord> the skin disapears quickly... Once a year is ok - right?
06:05 PM xxcoder: lol
06:05 PM Tom_L: i wonder how many houses burned down during the deep frier fad
06:05 PM lcnc-relay: <skunkworks8841@discord> ugh. A lot
06:05 PM xxcoder: or how many walls have gotten sticky with oil?
06:07 PM lcnc-relay: <skunkworks8841@discord> plus - it was cooked in about 2 hours.. Kinda threw off the schedule..
06:07 PM lcnc-relay: <skunkworks8841@discord> 15 lbs
06:07 PM Tom_L: true
06:07 PM xxcoder: not bad
06:07 PM xxcoder: sadly mine will be too small for that large turkey but can do small legs or whatever
06:07 PM Tom_L: we were gonna have roast but ended up with ham
06:07 PM lcnc-relay: <skunkworks8841@discord> we had ham too.. 🙂
06:07 PM Tom_L: not many fans of turkey here
06:08 PM Tom_L: roast was like $60 or more
06:09 PM lcnc-relay: <skunkworks8841@discord> oof
06:09 PM xxcoder: expensive
06:10 PM Tom_L: iirc the comparative ham was ~20
06:10 PM lcnc-relay: <skunkworks8841@discord> I don't remember what I paid for the ham - it was one of the spiral cut - don't have to do anything but re-heat.
06:11 PM xxcoder: nice
06:11 PM lcnc-relay: <skunkworks8841@discord> it was good..
06:11 PM xxcoder: not much fan of ham besides bacon
06:11 PM lcnc-relay: <skunkworks8841@discord> it also makes the house smell good..
06:11 PM xxcoder: I somewhat like it, but I like turkey a lot more
06:23 PM Unterhaus_ is now known as Unterhausen
06:23 PM Unterhausen: my solidworks license is up in 20 days and they made me click through 5 dialog boxes warning me about it
06:56 PM -!- #linuxcnc mode set to +v by ChanServ
07:23 PM lcnc-relay: <big_kevin420@discord> captainhindsight_.@discord that has a decent amount of io
08:15 PM lcnc-relay: <big_kevin420@discord> unterhausen@discord how much yo pay for license
08:28 PM -!- #linuxcnc mode set to +v by ChanServ
08:56 PM xxcoder: myfordboy have been better lately
08:56 PM xxcoder: I got sick of so many product reviews
09:56 PM xxcoder: interesting. i wonder if its possible to turn laser printer into laser cutter/engraver
09:56 PM xxcoder: recycling the laser in it
11:11 PM Tom_L: it's a start: http://tom-itx.no-ip.biz:443/~webpage/cnc/JT-SHOP/flexgui/thread_mill1.mkv