#linuxcnc Logs
Nov 27 2024
#linuxcnc Calendar
12:49 AM lcnc-relay: <meisterdippel@discord> moin
01:23 AM lcnc-relay: <captainhindsight_.@discord> Howdy
01:23 AM xxcoder: o/
01:24 AM Deejay: moin
02:38 AM lcnc-relay: <captainhindsight_.@discord> LCNC builds on MUSL now
02:40 AM lcnc-relay: <captainhindsight_.@discord> The MUSL devs were shaking their heads at some of the LCNC source
02:40 AM lcnc-relay: <captainhindsight_.@discord> Magic!
03:24 AM lcnc-relay: <travis_farmer@discord> Morning
03:27 AM lcnc-relay: <rs> now somebody needs to write autoconf tests to check for MUSL vs. GLIBC cpu affinity stuff and the like
04:12 AM JT-Cave: morning
04:19 AM Tom_L: morning
05:13 AM -!- #linuxcnc mode set to +vv by molybdenum.libera.chat
05:13 AM -!- #linuxcnc mode set to +v by molybdenum.libera.chat
09:49 AM JT-Woodshop: going to build a fire in here today
10:16 AM Rhine_Labs: Another local's Tormach ECM1 Board Fixed this week..a Loaner board keep his machine operating.
10:18 AM Rhine_Labs: Don't get many of the ECM1 Boards they are really well designed. PCW did an awesome job.
10:19 AM lcnc-relay: <skunkworks8841@discord> Lol - PCW is awesome in general... 🙂
11:08 AM rdtsc-wk: haven't seen him around here much lately... hope that changes
12:20 PM JT-Cave: flex is close to being an apt repository
12:23 PM Tom_L: cool beans
12:33 PM JT-Cave: nap time
12:34 PM Tom_L: looking over that BOI form
01:14 PM rdtsc_away is now known as rdtsc
01:36 PM JT-Shop: nasty cold wet day here
01:36 PM xxcoder: aka normal west washington weather
01:43 PM roycroft: i just got a call from the fraud department of a credit card issuer
01:44 PM roycroft: it appears that a card that i have that i have never used and was locked had a charge-attempt from overseas to an onlyfans account
01:44 PM roycroft: they wanted to know how it might have been compromised
01:45 PM roycroft: i told them they should look to themselves for that answer, since the card has never been used and has been locked in a safe since i got it
01:45 PM roycroft: it is sunny here, btw
01:45 PM roycroft: the rain is allegedly gone for a week or so
01:45 PM roycroft: i should unload my pickup soon
01:48 PM xxcoder: supposely will not rain here for a week too
01:50 PM bjorkintosh: hmm. so if you get a credit card that you never use, don't they just cancel it after a while?
02:04 PM roycroft: some do, some don't
02:05 PM roycroft: if it's one i don't use and i want to keep it, i use it once/year or so
02:05 PM roycroft: i don't have many that i don't use, though
02:06 PM roycroft: this particular one i got because it came with an 18 month at 0% apr promo, and i thought i might need it at the time for an unanticipated large expense, that i ended up financing a different way
02:06 PM lcnc-relay: <skunkworks8841@discord> we had that happen at work - atleast 3 credit cards were compromised by the same charges..
02:06 PM roycroft: if they cancelled it i would not care
02:06 PM roycroft: but they decided to send me a new one
02:06 PM lcnc-relay: <skunkworks8841@discord> There isn't any connection between the 3
02:06 PM roycroft: which i'll lock from use and put in the safe
02:06 PM lcnc-relay: <skunkworks8841@discord> so - we think the banl was compromised..
02:07 PM lcnc-relay: <skunkworks8841@discord> bank
02:07 PM lcnc-relay: <skunkworks8841@discord> which is scary
02:07 PM lcnc-relay: <skunkworks8841@discord> I just welded 2 bandsaw blades.. They seemed to work great!
02:08 PM lcnc-relay: <skunkworks8841@discord> have one in the cut off bandsaw - so far so good
02:08 PM lcnc-relay: <skunkworks8841@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/EHRDlFChBWXkxKkeoHtXeHnQ/PXL_20241127_200009512.jpg
02:09 PM lcnc-relay: <skunkworks8841@discord> I think this is my first time.. (dad ususally did it)
02:11 PM roycroft: well it's lunch time, so i should go see if i can hang that last cabinet in the studio
02:13 PM xxcoder: interesting
02:13 PM xxcoder: I gfuess just butt weld then grinder to make you good welder you arent?
02:19 PM lcnc-relay: <skunkworks8841@discord> It is an actual blade welder.. ,the 2 ends get smushed together - then yes - you grind off the bump
02:19 PM lcnc-relay: <skunkworks8841@discord> Then you act like you temper it.. 🙂
02:19 PM xxcoder: :)
02:19 PM bjorkintosh: hmm. I once so a doall bandsaw with a built in blade welder
02:19 PM roycroft: the problem with that is that the weld hardens that part of the blade
02:19 PM bjorkintosh: the blade welder bit didn't work though. long out of use.
02:20 PM bjorkintosh: *saw
02:20 PM roycroft: yeah, so you temper it after
02:20 PM lcnc-relay: <skunkworks8841@discord> This is a jet band saw -
02:20 PM roycroft: most people don't temper after welding and grinding, and the weld does not hold up well
02:21 PM bjorkintosh: exactly like this: https://www.youtube.com/watch?v=zOOrhYg5tcQ
02:21 PM lcnc-relay: <skunkworks8841@discord> Yes.. it has a push button for tempering.. but you have to do your own pwm to let it cool slow
02:21 PM roycroft: larger metal bandsaws, especially veritical ones, commonly come with a blade welder
02:21 PM bjorkintosh: roycroft: I don't think a lot of people think about tempering in the first place.
02:21 PM roycroft: virtually no wood bandsaws come with one
02:21 PM roycroft: and i would bet that exactly zero butcher bandsaws come with one
02:22 PM bjorkintosh: those should be stainless steel shouldn't they?
02:22 PM roycroft: our modern politic indicates that most people do not think about tempering their demeanor
02:22 PM bjorkintosh: correct.
02:22 PM bjorkintosh: but a lot are quick tempered.
02:22 PM roycroft: yes, and don't temper their temper
02:23 PM bjorkintosh: Correct.
02:23 PM bjorkintosh: leading to ... temporary outbursts of temper over NOTHING!
02:26 PM lcnc-relay: <skunkworks8841@discord> That is very similar to the jet one
02:53 PM * JT-Shop starts his weekend shortly
02:57 PM JT-Shop: with a Weihenstephaner Hefe Weissbier
03:03 PM xxcoder: nice. new winston video. its pretty rare. https://www.youtube.com/watch?v=b6GdEEzsulc
03:17 PM Tom_L: not a good day to be shopping
03:28 PM rdtsc is now known as rdtsc_away
03:34 PM roycroft: that's why i went grocery shopping and banking yesterday
03:34 PM roycroft: it was still crazy
03:34 PM roycroft: but today is crazy x10
03:35 PM roycroft: my plan is to go nowhere until friday, at least
03:35 PM JT-Shop: not too bad here today, went a got a stick of uni strut and some bread and cheese
04:02 PM roycroft: i think my chore after work is to find the baggie full of cabinet hardware, so i can mount the doors on the cabinets and start stashing things inside them
04:06 PM Tom_L: i was going for one thing and nobody had it
04:06 PM JT-Shop: I went to Kroger for bread and cheese and they were out of brioche so I went to neighborhood walmart which usually has a better supply
04:07 PM Tom_L: dillons(kroger) here there was absolutely no where to park
04:07 PM roycroft: i just got a parcel delivered from infinity tools - something i've been thinking about making for a long time, but is on sale and made much nicer than i would probably do: https://infinitytools.com/collections/infinity-signature-series/products/router-bit-vise
04:08 PM Tom_L: never did find Watkins Maple extract
04:08 PM JT-Shop: what do you use that for?
04:08 PM Tom_L: their stuff is better than Mccormick or any other
04:08 PM roycroft: i am (when my shop is functional) constantly removing and reinstalling guide bearings on my router cutters
04:08 PM roycroft: and i've cut myself more than a few times in the process
04:08 PM Tom_L: maple cake
04:08 PM roycroft: that thing has one-way bearings
04:08 PM Tom_L: frosting
04:08 PM JT-Shop: menards says they have it
04:09 PM Tom_L: yeah i'm gonna send the kid after he gets off work
04:09 PM lcnc-relay: <travis_farmer@discord> real maple sugar is better
04:09 PM roycroft: so you stick a shank in it on one side and it locks in place as youre move the bearing
04:09 PM Tom_L: i went the complete opposite direction from menards
04:09 PM roycroft: flip it over and it locks it as you reinstall the bearing
04:09 PM * roycroft uses real maple syrup
04:09 PM Tom_L: you don't put syrup in frosting
04:09 PM roycroft: but for a maple cake maple extract may be more appropriate
04:10 PM roycroft: nor maple sugar, which is essentially dried maple syrup
04:10 PM lcnc-relay: <travis_farmer@discord> what is maple extract? never used it?
04:11 PM Tom_L: it's better than vanilla is what it is
04:11 PM Tom_L: everybody uses vanilla...
04:12 PM roycroft: maple extract would be maple flavor extracted from maple syrup/sugar
04:13 PM roycroft: probably maple sugar would be best for it
04:13 PM roycroft: take that and add alcohol
04:13 PM roycroft: and you have extract
04:13 PM Tom_L: i'll leave that to Watkins... they're pretty good at it
04:14 PM Tom_L: better than McCormick
04:14 PM Tom_L: which is more widely sold in stores
04:15 PM roycroft: most products from mccormick are made in labs, not gathered and processed from nature
04:24 PM Tom_L: there is a stand at the state fair here that sells it but we forgot to stop by and get some this year
04:31 PM roycroft: you're not in iowa, so there's probably not a stand at the state fair that sells deep fried butter
04:31 PM roycroft: but maybe deep fried corn?
04:32 PM roycroft: i'm not sure maple extract would go well with deep fried corn
04:33 PM bjorkintosh: I actually like vanilla.
04:33 PM bjorkintosh: nothing wrong with it. ubiquitous? yes. plain? never.
04:34 PM JT-Shop: after watching the state fair movie from 1945 I've always wanted to go to a state fair
04:34 PM JT-Shop: https://www.imdb.com/title/tt0038116/
04:38 PM roycroft: vanilla is delicious
04:38 PM roycroft: synthetic vanillin not so much
04:38 PM roycroft: and the latter is the kind of stuff you get from mccormick
04:38 PM roycroft: we used to go to the illinois state fair every year when i was a kid
04:39 PM roycroft: my great aunt lived in springfield, so we'd head down there with the camper and set it up in her yard
04:39 PM roycroft: i've only been to the oregon state fair a couple times
04:40 PM roycroft: we saw little richard there once
04:40 PM roycroft: back in his comeback era
04:40 PM * roycroft never did the puyallup (attended the washington state fair)
04:47 PM * JT-Shop calls it an early night to make the brine for the bone in turkey breast
04:53 PM Tom_L: vanilla is good yes, but we like maple better
05:06 PM bjorkintosh: <roycroft> we saw little richard there once why that little dick!
05:06 PM bjorkintosh: was he tiny?
05:06 PM bjorkintosh: never seen him before.
05:34 PM roycroft: he was full of energy
05:34 PM roycroft: he put on a really good show
05:34 PM roycroft: while not tiny, basketball was definitely not his calling
05:35 PM * roycroft heads out to look for the cabinet hardware
06:32 PM lcnc-relay: <skunkworks8841@discord> I have one brandy old fashion in me.. But I really should get some more work done.
06:40 PM * roycroft has decided that some cat genes snuck into the baggie full of cabinet hardware, as it is hiding very well and is unwilling to be found
06:46 PM xxcoder: cat hardware lol
06:57 PM xxcoder: my phone number must have been freshly discovered and sold
06:57 PM xxcoder: im getting 4-5 calls a day, leaving empty messages lol
06:57 PM xxcoder: its annoying to download video and its just interpeter saying "was silent, hung up"
07:00 PM xxcoder: its been shifting around dinner time too, 4-6 pm. probably trying to find time im home. jokes on them, im always home and dont answer phonecalls
07:04 PM Tom_L: ok menards had the maple extract..
07:05 PM Tom_L: glad that's solved
07:05 PM xxcoder: nice
07:09 PM Tom_L: speaking of phones i think i've been getting these on mine: https://www.reddit.com/r/windowsphone/comments/1xa1w1/why_are_amber_alerts_getting_spammed_to_my_phone/
07:09 PM Tom_L: generally if i'm getting a real one so is everyone else in the house
07:12 PM lcnc-relay: <skunkworks8841@discord> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/KDwkylTvHTytzgFlVmTQVibp/PXL_20241128_010352710.MP.jpg
07:34 PM bjorkintosh: oh wow.
07:34 PM bjorkintosh: there's a chance they are both from the same source, skunkworks.
07:34 PM bjorkintosh: ie, a manufacturer sold it to numerous bandsaw makers.
07:37 PM xxcoder: odd. on my cellphone if I get amber it would be only once
07:53 PM Tom_L: i got 3-4 in one day and about the same the next
08:42 PM xxcoder: wesley treat storage solution for storage
08:42 PM xxcoder: https://www.youtube.com/watch?v=vpIXaAo0DB0
09:13 PM roycroft: that wesley is ok
09:14 PM roycroft: as long as it's not wesley crusher