#linuxcnc Logs

Nov 21 2024

12:22 AM lcnc-relay: <rs> ~272K here
01:15 AM xxcoder1 is now known as xxcoder
01:34 AM Deejay: moin
04:20 AM Tom_L: morning
04:20 AM Tom_L: 38°F hi 49°F
04:24 AM lcnc-relay: <travis_farmer@discord> Morning
04:25 AM lcnc-relay: <travis_farmer@discord> 41F/45F and raining
04:27 AM lcnc-relay: <travis_farmer@discord> or 278.15 Kelvin, as the above examples 😉
04:38 AM JT-Cave: morning
05:53 AM lcnc-relay: <captainhindsight_.@discord> 271.5K here and the snow didn't show up
06:05 AM NetPipe: https://www.facebook.com/share/p/15nQPAk6Gz/
06:06 AM NetPipe: painted white would be ideal, would last like 80+ year
06:31 AM -!- #linuxcnc mode set to +v by ChanServ
06:31 AM -!- #linuxcnc mode set to +v by ChanServ
08:02 AM lcnc-relay: <captainhindsight_.@discord> I doubt that idea will gain traction
08:04 AM lcnc-relay: <rs> looks like hallucination from AI
09:32 AM Unterhaus_ is now known as Unterhausen
10:24 AM lcnc-relay: <skunkworks8841@discord> For some reason - dialing into the local library to see if they had a book I needed popped into my head. that was random.
11:20 AM Unterhausen: weather map over eastern pennsylvania looks interesting right now
11:22 AM JT-Cave: colorful?
11:23 AM Tom_L: you _could_ mix a little red & yellow in there
11:25 AM JT-Cave: forecast of rain for Monday here
11:27 AM Tom_L: 20% Wednesday
11:27 AM Tom_L: 5% Friday - Tuesday
11:28 AM JT-Cave: I hope to finish wiring the subpanel today...
11:28 AM Tom_L: deliver next week?
11:28 AM JT-Cave: I hope so
11:28 AM Tom_L: cool
11:29 AM JT-Cave: get the darn thing bolted to the floor and start on the remote mounts and getting 480v to the panel from the one above
11:29 AM Tom_L: that's ahead of schedule i think
11:30 AM Tom_L: do they do the 480v themselves?
11:30 AM Unterhausen: purple maps are the best
11:34 AM JT-Cave: the system I'm replacing is above where this panel goes and it has 480v from two sources
01:18 PM lcnc-relay: <Lcvette> JT-Cave: I have a friend with a 7i95 mesa and we just realized it has no analog spindle control, is there an add on card that works for this?
01:23 PM JT-Shop: The 7I83 is remote isolated six channel +-10V analog output card
01:31 PM lcnc-relay: <Lcvette> oh wow, that way more than he needs, don't suppose there is a way to turn one of the step/dir into 0-10v analog out on the 7i95 board is there?
01:32 PM lcnc-relay: <travis_farmer@discord> there are little boards on ebay that can turn PWM into 0-10v
01:32 PM lcnc-relay: <roguish> Mesa also has an analog spindle control board
01:32 PM lcnc-relay: <Lcvette> roguish: ehatds t called?
01:33 PM lcnc-relay: <Lcvette> * what is it
01:34 PM lcnc-relay: <roguish> looking
01:35 PM lcnc-relay: <roguish> frack, I have one...
01:38 PM lcnc-relay: <roguish> https://store.mesanet.com/index.php?route=product/product&product_id=205&search=pwm
01:38 PM Unterhausen: Msft just changed the wallpaper on my computer to tell me to get a new computer. F-off Bill Gates
01:38 PM lcnc-relay: <roguish> it ain't Gates anymore
01:39 PM xxcoder: yeah he have long while ago left.
01:39 PM Unterhausen: I still blame Bill, can't keep up
01:39 PM lcnc-relay: <roguish> MS pulls that shit all the time.
01:39 PM lcnc-relay: <Lcvette> perfect
01:39 PM lcnc-relay: <Lcvette> crap out of stock
01:39 PM xxcoder: linux mint for me for quite a while now
01:39 PM Unterhausen: I would blame Paul Allen too, but he's dead
01:40 PM lcnc-relay: <roguish> Lcvette: https://store.mesanet.com/index.php?route=product/product&product_id=393&search=spin
01:40 PM lcnc-relay: <roguish> says in stock
01:40 PM lcnc-relay: <Lcvette> yup found
01:40 PM lcnc-relay: <Lcvette> 😄
01:41 PM lcnc-relay: <Lcvette> roguish: thanks rougish!
01:41 PM lcnc-relay: <Lcvette> that price is much more inline
01:41 PM lcnc-relay: <Lcvette> yours on a 7i95 too?
01:41 PM lcnc-relay: <roguish> i got one for my spindle. worked good on the VFD. I did change to modbus comp. also works good on the Delta VFD
01:42 PM lcnc-relay: <roguish> I have a 7I80HD
01:43 PM lcnc-relay: <travis_farmer@discord> i just use a 7i83 for my spindle and laser
01:43 PM lcnc-relay: <Lcvette> this is on an older machine retrofit, i suspect the vfd its using may not be modbus friendly
01:43 PM lcnc-relay: <roguish> good luck
01:43 PM lcnc-relay: <travis_farmer@discord> <-- didn't like modbus... too much lag
01:43 PM lcnc-relay: <roguish> glad to help
01:44 PM lcnc-relay: <roguish> finally getting some rain. .62 inch so far today...
01:44 PM lcnc-relay: <travis_farmer@discord> pouring rain here
01:53 PM Unterhausen: we had a deluge yesterday. That's french for "deluge"
01:55 PM Unterhausen: I just got a Veritas plane blade. Even their chipbreakers are sharp enough to cut you
01:55 PM Unterhausen: no warning about that though
02:08 PM Tom_L: lcvette: https://mesaus.com/product/spinx1a/
02:08 PM Tom_L: 5 in stock
02:12 PM JT-Shop: lcvette if the spindle uses a pot to control speed the spinx-1 will work
07:11 PM _unreal_: so I got 3 of these in the mail from aliexpress. https://www.aliexpress.us/item/3256807769537622.html?spm=a2g0o.order_list.order_list_main.10.1fc61802QmehG3&gatewayAdapt=glo2usa
07:12 PM _unreal_: I'm DIEING to try them. cant right now but will be amazing to test them witht eh large brushelss motors I hyave
07:12 PM _unreal_: have
07:12 PM _unreal_: will be SOOO cool to use them in the future with the 2.2kw spindle
07:47 PM lcnc-relay: <skunkworks8841@discord> it really is amazing what you can get now...
07:49 PM lcnc-relay: <skunkworks8841@discord> 12v at 70v - 1600watts? that is going to be hard to do with any normal servos... are you going to use rc motors as servos?4
07:49 PM lcnc-relay: <skunkworks8841@discord> *70a
08:19 PM xxcoder: man I hate having to work on stuff while sick
08:20 PM xxcoder: today was trash/recycle day so I had to destroy boxes and finally shred tons of useless old papers