#linuxcnc Logs

Nov 17 2024

01:45 AM Deejay: moin
03:37 AM holgersson: moin Deejay
04:59 AM JT-Cave: morning
06:02 AM lcnc-relay: <travis_farmer@discord> Morning
06:54 AM Tom_L: morning
09:23 AM rdtsc_away is now known as rdtsc
09:55 AM lcnc-relay: <skunkworks8841@discord> Tom_L: that looks awesome!
10:23 AM rdtsc: Tom, I built a new .deb for arm on the rpi. Figured we could take turns. What is the usual process for getting the .deb to JT? I have to do it from the terminal. Git just shows a commit, so add the file, commit, push, and JT takes care of the rest?
10:24 AM rdtsc: push and PR, forgot that part
10:44 AM Tom_L: pull anything from him first then add it to your flexgui folder
10:44 AM Tom_L: i was about to do that
10:45 AM Tom_L: wanted him to get my ops pulled first
10:47 AM Tom_L: all i do is click an icon :)
10:47 AM Tom_L: and done
10:48 AM rdtsc: was setting up a script to automate it, but syntax isn't very clear on git request-pull
10:48 AM -!- #linuxcnc mode set to +v by ChanServ
10:57 AM Tom_dev: rdtsc, git add, git commit -m, git push --repo your repo
10:58 AM Tom_dev: then make a PR off yours to him
11:09 AM rdtsc: think all the steps are good except for the terminal PR. 'git request-pull master <URL>' seems to want only one URL, and mine, not JT's. Is a PR just a flag on *my* repo, which indicates to JT that he (or anyone) can pull the file? figured it would want his destination, since he's the target of the file.
11:09 AM rdtsc: but admittedly, not a git guru :)
11:17 AM rdtsc: images/FlexGUI-blackbg-redeyes.png <-- is that for any of the 4:20 users out there? heheheh
11:26 AM Tom_L: we had an idea
11:26 AM Tom_L: well see if it progresses
12:29 PM roycroft: 40 cm of snow at willamette pass this afternoon/evening
12:29 PM roycroft: winter is here
12:30 PM roycroft: it's raining at the pass right now, but the snow should start mid-afternoon
12:35 PM -!- #linuxcnc mode set to +v by ChanServ
12:36 PM -!- #linuxcnc mode set to +v by ChanServ
12:44 PM xxcoder: oh yes roy I missed your question. its simple spindle control, you send in power from psu and control it via 0-10v if I recall right
12:47 PM xxcoder: there should be knob somewhere, its a way to control spindle also
12:50 PM xxcoder: wow spindles is so cheap nowdays lol
02:25 PM Unterhaus__ is now known as Unterhausen
03:09 PM JT-Shop: that was painful... spent all day trying to put new screen in the screen door for the catio and ended up buying a new door
03:10 PM Tom_L: sounds about like me and the sub working with arcs and abandoned it to finish in like 20 min
05:36 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/HpSsvmHpXnWHmPSrYkCxudcV/1000002576.jpg
05:50 PM Tom_L: pretty
05:51 PM Tom_L: how's the wheel bearing?
05:51 PM JT-Shop: it feels tight
05:52 PM Tom_L: i don't think i can do what i want to do in the qss file
05:52 PM JT-Shop: what's that?
05:52 PM Tom_L: use the button state to change the background image of a qframe
05:52 PM Tom_L: i think you know...
05:52 PM JT-Shop: ah no I think that has to be done in code
05:53 PM Tom_L: i figured as much
05:53 PM Tom_L: the images match pretty well
05:54 PM Tom_L: i'm not sure whether to try a ridid tapping op
05:54 PM JT-Shop: :)
05:54 PM Tom_L: alot more to deal with
05:55 PM Tom_L: time will tell
05:57 PM Tom_L: i'll have to look and see how i did it in my cad first
05:59 PM Tom_L: if i can find it...
06:00 PM * JT-Shop calls it a day
06:16 PM rdtsc is now known as rdtsc_away
06:23 PM lcnc-relay: <skunkworks8841@discord> I rememberd today that the log splitter has a 3 point hitch.. I put it on the back of the ford and took it to the tree.. One less handling step.
06:53 PM lcnc-relay: <skunkworks8841@discord> would have liked to have put it on the kubota (faster hydraulics) but I would have to come up with a valve and fittings
06:53 PM lcnc-relay: <skunkworks8841@discord> dad found a secondary pump for the ford - but I would have to do some resarch on how it is hooked up
06:54 PM lcnc-relay: <skunkworks8841@discord> (runs off a cam gear)
07:26 PM Tom_L: rigid tap...
08:06 PM _unreal_: :)
08:06 PM _unreal_: just did a training session with a friend this weekend giving him an intro to CAD.
08:07 PM _unreal_: his company is interested in having me contract doing cad drawings and stuff. he my friend is a welder.
08:07 PM _unreal_: everyone is starting to come out of the wood works as I expected now that I'm starting to be free of family issues.
08:07 PM _unreal_: woo wooo.
08:08 PM -!- #linuxcnc mode set to +v by ChanServ
09:02 PM Tom_L: http://tom-itx.no-ip.biz:443/~webpage/cnc/JT-SHOP/flexgui/pattern_drill_peck_tap_mill.mkv