#linuxcnc Logs

Nov 02 2024

12:48 AM -!- #linuxcnc mode set to +v by ChanServ
02:04 AM Deejay: moin
04:09 AM -!- #linuxcnc mode set to +v by ChanServ
05:52 AM lcnc-relay: <travis_farmer@discord> Morning
06:00 AM Tom_L: morning
06:02 AM lcnc-relay: <travis_farmer@discord> i had to go to the ER late last night. went to bed, and noticed a lump on my gums. touched it with my tongue and it blew up and filled my mouth with blood.
06:02 AM lcnc-relay: they deemed it an infection and gave me antibiotics.
06:06 AM JT-Cave: ouch
06:07 AM Tom_L: be careful with it. i had 2 rounds of antibiotics & an iv on mine and it didn't do alot until i got the repairs i needed
06:07 AM Tom_L: yours was more extensive
06:10 AM Tom_L: surprised they didn't give you an antibiotic in an iv as much as you had done
06:16 AM JT-Cave: there's been a lot of chatter on the dev mailing list about removing i/o control v2 but I still see it in the docs
06:18 AM rdtsc_away is now known as rdtsc
06:26 AM Tom_L: what is their reasoning?
06:27 AM JT-Cave: I didn't pay close attention until now
06:28 AM Tom_L: they plan to leave v1 in?
06:28 AM Tom_L: i think they moved the docs to v2 since v1 doesn't show much
06:28 AM JT-Cave: no clue
06:28 AM Tom_L: no idea what the difference is
06:29 AM Tom_L: heard raindrops, looks like we're right on the edge of the storm
06:32 AM Tom_L: i see there's also an 'io' along with iocontrol and iov2
06:34 AM Tom_L: I/O Control V2 (iov2) adds more toolchager support for communication with the toolchanger.
06:56 AM -!- #linuxcnc mode set to +v by ChanServ
06:59 AM -!- #linuxcnc mode set to +v by ChanServ
08:14 AM JT-Cave: https://www.corvetteforum.com/forums/c3-tech-performance/4874550-82-front-suspension-rebuild.html
08:35 AM rdtsc: Did they just exclude some percentage of users from ever updating?
08:56 AM rmu: the commit that removed iov2 landed over a year ago
09:16 AM JT-Cave: in master?
09:18 AM rdtsc is now known as rdtsc_away
09:20 AM Tom_L: looks like ~3" since i last checked in... raining buckets now
09:21 AM Tom_L: just don't mix the moog parts with control box parts :)
09:22 AM JT-Cave: lol
09:31 AM Tom_L: never heard of using composite springs
09:31 AM Tom_L: but i've been out of that loop quite a while
09:33 AM Tom_L: https://www.wunderground.com/maps/radar/current/sln
09:50 AM JT-Shop: the C5 had a composite rear spring not sure if the C4 does
09:58 AM Tom_L: we did have an adjustable composite rollup bar on the late model
10:02 AM Tom_L: haha.. just ran across https://kansasracinghistory.com/Hutch_Nationals/Fair/13Sep1981.htm
10:02 AM Tom_L: McGehee was our driver
10:04 AM Tom_L: i think that was prior to ours
10:18 AM lcnc-relay: <travis_farmer@discord> doing better, swelling on the gums is going down, so the antibiotics are working. 🙂 feeling better too after a nice oatmeal breakfast, have not had hardly any carbs for a while now. 🙂
10:26 AM rdtsc_away is now known as rdtsc
12:01 PM -!- #linuxcnc mode set to +v by ChanServ
02:34 PM Tom_L: quiet day today.
02:34 PM Tom_L: another inch of rain here
02:40 PM * JT-Shop lets the compressor cool down and takes 5
02:43 PM Tom_L: 13.3 stone
02:43 PM Tom_L: gonna cheat tonight
02:47 PM Tom_L: you're not gonna powdercoat the A arms while they're off are ya/
02:47 PM Tom_L: ?
02:47 PM JT-Shop: no, too many nooks and crannies
03:04 PM Tom_L: https://youtu.be/qYJovKpBjkE
03:17 PM JT-Shop: cool
03:23 PM Tom_L: for the process, i liked the 'how it's made' one better
03:24 PM Tom_L: https://www.youtube.com/watch?v=9fWfFiKBxSc
03:30 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/dZXptcNqyCxdSsLscyIPETnE/1000002540.jpg
03:30 PM Tom_L: goin back with black?
03:36 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/KqxjigbmZpwcsdyNBgjoiUqQ/1000002541.jpg
03:36 PM lcnc-relay: <JT> Beer 30
03:36 PM Tom_L: lookin good
03:42 PM -!- #linuxcnc mode set to +v by ChanServ
03:51 PM JT-Shop: https://www.youtube.com/watch?v=EC_1WueTQX4
03:53 PM xxcoder: interesting
03:53 PM xxcoder: watching now.
04:23 PM xxcoder: JT-Shop: pretty interesting, just annoying video style, that sped up "shuttering" type
04:35 PM JT-Woodshop: I was impressed that it worked... that just shows you how inventive he is
04:35 PM xxcoder: yeah
04:36 PM xxcoder: should use more ppe but yeah, I guess most people could do the boat part in least. engine and chair needs good understand to balance well
04:39 PM JT-Woodshop: whew one upper control arm nut off...
04:46 PM JT-Woodshop: I suspect ppe is not affordable for them
04:47 PM xxcoder: yeah or not accessable at all
04:47 PM xxcoder: thats why I said should rather than must
04:49 PM 030AAKN0G is now known as DmanT
04:52 PM xxcoder: fun blondihack video today
05:04 PM lcnc-relay: <skunkworks8841@discord> lol
05:21 PM lcnc-relay: <skunkworks8841@discord> Finally caught the flu that went through the fam.. Started friday morning. yesterday sucked. Today I feel better
06:06 PM * JT-Shop calls it a night
06:46 PM rdtsc: Wondered where you've been sw, glad everyone is on the up-and-up... Here's an old, favorite OT vid: https://www.youtube.com/watch?v=VO6XEQIsCoM
08:21 PM rdtsc is now known as rdtsc_away