#linuxcnc Logs

Oct 17 2024

01:01 AM lcnc-relay: <meisterdippel> moin
01:31 AM Deejay: moin
01:46 AM lcnc-relay: <vibram> hello
02:05 AM hozed: ayeeee
03:34 AM lcnc-relay: <Travis Farmer> Morning
03:46 AM lcnc-relay: <Travis Farmer> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/QChhQUuOcEYiAgeAvnlMTWtX/Screenshot_2024-10-17_at_04-17-12_CBLSF_Industrial_Signal_Tower_Flash_LED_Light_with_Buzzer_Alarm_Warning_Lamp_CNC_eBay.png
03:46 AM lcnc-relay: <Travis Farmer> don't you just hate when you order something, only to read later that the dang thing is HUGE??? i ordered a LED status tower light for my machine... from china... it will be here tomorrow.... it is 21.5in tall !!! i seriously thought 12in to 16in tall. but 21.5in was not even close to what i was thinking...
03:46 AM lcnc-relay: so now i have no idea where i will mount it...
04:27 AM -!- #linuxcnc mode set to +v by ChanServ
04:27 AM -!- #linuxcnc mode set to +v by ChanServ
04:31 AM JT-Cave: morning
04:35 AM Tom_L: morning
04:36 AM Tom_L: travis, yard light
04:38 AM lcnc-relay: <oz7137> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/JoHHDVJJZQqoQcucjYbMxaFg/1729157415463.jpg
04:38 AM lcnc-relay: <oz7137> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/kBPGOjdBTQFonLqTODIuvseo/1729157415474.jpg
04:38 AM lcnc-relay: <oz7137> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/pmWCvQlwUJbBWrnYJOnEqWiI/1729157415483.jpg
04:38 AM lcnc-relay: <oz7137> I prefer going DIY personnally...
04:41 AM lcnc-relay: <Travis Farmer> lol Tom_L
04:43 AM lcnc-relay: <Travis Farmer> oz7137 i wanted the industrial look... but i didn't realize the thing could land airplanes at night. 🤣
04:44 AM Tom_L: if i were in an environment where there were half dozen or more loud machines i could see having one. not on a single small cnc in my shop
04:44 AM lcnc-relay: <oz7137> Travis Farmer can be done too, I'm generally going for function first and don't-care-everything-else
04:45 AM lcnc-relay: <oz7137> Can serve as personal defense tool too, with integrated light
04:45 AM lcnc-relay: <Travis Farmer> i will likely make it a functional wall-hanger
04:56 AM lcnc-relay: <Travis Farmer> the reason i got it Tom_L, is so i can step away from the control computer, and tell at a glance that everything is running ok (no amber light on to indicate a warning condition). also, it will indicate waiting for a tool change, and the white LED will be to indicate the Laser is active, for now.
05:03 AM lcnc-relay: <captainhindsight_.> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/pLWZgPpFcoOMIEbomsbNhvkS/IMG_20241017_045603.jpg
05:04 AM lcnc-relay: <captainhindsight_.> Had frost tonight on the car windows
05:04 AM lcnc-relay: <captainhindsight_.> Sleet last might
05:07 AM lcnc-relay: <captainhindsight_.> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/wSGJsKGmcIOJFHQHZeUhdNdc/IMG_20241017_045944.jpg
05:07 AM lcnc-relay: <captainhindsight_.> old mori with crt control
07:38 AM JT-Cave: Tom_L, https://www.youtube.com/watch?v=h3m33BC7GZ0
07:38 AM JT-Cave: and Travis
07:52 AM Tom_L: sound is really low on that one
07:52 AM JT-Cave: I'm not talking just mumbling lol
07:53 AM Tom_L: oh.. hal in
07:53 AM JT-Cave: yup
07:53 AM Tom_L: nice
07:53 AM JT-Cave: https://gnipsel.com/linuxcnc/flexgui/hal.html#label
07:54 AM Tom_L: QLable
07:54 AM JT-Cave: lol
07:55 AM Tom_L: is it ready to test?
07:55 AM JT-Cave: yup
07:55 AM Tom_L: i'll look at it later today
07:56 AM Tom_L: wonder what type the timer would be.. float or s32
07:56 AM Tom_L: u32
08:01 AM JT-Cave: time is http://linuxcnc.org/docs/stable/html/man/man9/time.9.html
08:02 AM Tom_L: PR #141
08:03 AM Tom_L: yeah, U32
08:04 AM Tom_L: guess i should wait til you're done :)
08:05 AM JT-Cave: I'm done
08:07 AM Tom_L: 142 on the way then
08:08 AM Tom_L: and done
08:09 AM Tom_L: big day today ehh
08:09 AM JT-Cave: it was actually easier than I thought once I figured out how...
08:09 AM Tom_L: things are that way usually
08:09 AM JT-Cave: yup getting the 82 inspected and a ton of boxes arriving
08:10 AM Tom_L: you broke something
08:10 AM Tom_L: sims won't start now
08:11 AM Tom_L: status ln 275
08:11 AM Tom_L: no attribute hal_readers
08:12 AM JT-Cave: oh ok
08:14 AM JT-Cave: fixed
08:17 AM Tom_L: but not pushed
08:19 AM Tom_L: oh, maybe i had it and didn't know it
08:20 AM Tom_L: yup that works
08:22 AM Tom_L: 143
08:30 AM Tom_L: ok got all the hooks ready just need to add the new halpin stuff
08:31 AM Tom_L: what name is used in postgui for the connection?
08:31 AM Tom_L: the widget name?
08:32 AM Tom_L: pin name..
08:32 AM Tom_L: is is still flexhal.pinname
08:32 AM Tom_L: ?
08:45 AM lcnc-relay: <Travis Farmer> <-- is real excited about the HAL readers! Thank you JT! 😄
08:47 AM Tom_L: JT-Cave, pin doesn't exhist is post gui
08:47 AM Tom_L: synatx?
08:48 AM Tom_L: tried flexhal.timer_hrs and timer_hrs etc
08:48 AM Tom_L: no joy
08:49 AM Tom_L: bbl
08:50 AM Tom_L: got all the hooks, just need that last puzzle piece
09:00 AM lcnc-relay: <Travis Farmer> Tom_L: isn't there something that hal pins need to use a hyphen, not an underscore? i think i ran into that with my comp making once...
09:10 AM rdtsc_away is now known as rdtsc
09:11 AM rdtsc: Morning, and nice work gentlemen. :)
09:12 AM rdtsc: Travis, yeah light towers are surprisingly hard to find in small size (and very easy to find in large size.) Can you take it apart and remove some of the sections? Likely.
09:14 AM lcnc-relay: <Travis Farmer> don't know rdtsc, i think it is a one-piece unit
09:30 AM lcnc-relay: <Travis Farmer> <-- heading out to test flex readers 🙂
09:37 AM rdtsc: Oz7137's "tower" is pretty nice - is that an RGB LED?
09:42 AM lcnc-relay: <JT> Tom_L see what the pin name is in show hal
10:06 AM lcnc-relay: <Travis Farmer> i can't power on my machine anymore... power on is grayed out
10:07 AM lcnc-relay: <Travis Farmer> regardless of Estop active/inactive
10:08 AM lcnc-relay: <roguish> Tom_L: have you figured out how to read parameters in the .var file? and put them in the probe
10:21 AM lcnc-relay: <Travis Farmer> yeah, somethings very wrong, my FlexGUI machine won't connect to my board, says packet errors are present. but Axis connects just fine
10:27 AM lcnc-relay: <Travis Farmer> hang on... i backed out the Flex update to an old one and i still have the issue...
10:32 AM lcnc-relay: <Travis Farmer> ok, back... ID: TEN-T error *face-palm
10:36 AM roycroft: we have the rain today
10:37 AM roycroft: i think i can still work on the shop after work, though
10:37 AM lcnc-relay: <roguish> Mt Ashland has a bit of snow on top
10:37 AM lcnc-relay: <roguish> we're sunny and warm again. not hot thought
10:37 AM lcnc-relay: <roguish> though
10:44 AM Tom_L: JT-Cave, i don't see them in hal show
10:45 AM lcnc-relay: <Travis Farmer> works for me Tom_L. take out the underscore and replace with hyphen
10:45 AM Tom_L: i see the timers
10:45 AM Tom_L: i have underscore on other halpins
10:46 AM lcnc-relay: <Travis Farmer> hmm, well, it works for me...
10:48 AM lcnc-relay: <Travis Farmer> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/qSMJYSIeoUwUkqdAamhFmTIY/Screenshot_from_2024-10-17_11-40-15.png
10:48 AM lcnc-relay: <Travis Farmer> note the time on cycle timer
10:51 AM roycroft: willamette pass got some snow last night, but not much
10:59 AM lcnc-relay: <Travis Farmer> heads back in, testing passed with flying colors 🙂
11:01 AM Tom_L: JT-Cave, the dynamic properties of the hal in are case sensitive
11:02 AM Tom_L: i have 2 that show and one that doesn't in hal show. i used upper case on it
11:02 AM roycroft: yes, it's definitely snowing in the passes now
11:04 AM Tom_L: JT-Cave, at least on the descriptors: pin_name, hal_type, hal_dir etc
11:06 AM Tom_L: also hal_pin in the first line is case sensitive: function HAL_PIN doesn't work
11:08 AM Tom_L: travis, nothing to do with '_' or '-'
11:08 AM TurboTeknique: To add GPIO to LinuxCNC using an external box, what PLC network protocol do I want the box to support? Ethernet/IP? Modbus tcp? Ethercat?
11:08 AM lcnc-relay: <Travis Farmer> ok, i just ran into that making comps a while back. thought it was the issue 🙂 glad you figured it out
11:14 AM JT-Cave: https://gnipsel.com/linuxcnc/flexgui/hal.html
11:21 AM Tom_L: :)
11:23 AM JT-Cave: pretty cool I think
11:23 AM JT-Cave: got the inspection on the 82 after my nap going to get insurance and tags
11:23 AM JT-Cave: then an alignment
11:23 AM Tom_L: nice
11:24 AM Tom_L: works good
11:33 AM Tom_L: JT-Cave, does your state have call ahead at the tag office?
11:34 AM Tom_L: that really streamlined the process here
11:34 AM Tom_L: they txt when you're getting close
11:34 AM Tom_L: may have been a result of covid
11:35 AM lcnc-relay: <roguish> Tom_L: have ya figured out how to store the probing speeds and distances parameters ????
11:36 AM Tom_L: nope
11:37 AM JT-Cave: nope
11:38 AM JT-Cave: while you can create a hal pin named -HumPty_12 I've not tested connecting to it in the post gui hal file
11:38 AM lcnc-relay: <roguish> like the CableGuy says.... get 'er done.....
11:39 AM lcnc-relay: <roguish> just signed and sealed my ballot. gotta drop it off at a ballot box today.
11:39 AM Tom_L: adding cycle times to tp3
11:50 AM JT-Cave: nap time
12:40 PM lcnc-relay: <Travis Farmer> Getting ready to take back tax docs to accountant🙂
01:03 PM roycroft: oregon just started mailing ballots yesterday
01:03 PM roycroft: i have not received mine yet, but there is a constitutional amendment and a ballot measure that i'm not decided on yet, so even when i do receive my ballot it may be a while before i can cast my vote
01:04 PM xxcoder: seems tomorrow for wa state to mail out ballots
01:05 PM roycroft: the 15th was the voter registration deadline here
01:23 PM JT-Shop: dmv had one person working and 25 waiting... I said screw this
01:24 PM xxcoder: wow
01:24 PM xxcoder: here theres good number of workers
01:24 PM xxcoder: like 8, and all busy constantly
01:25 PM xxcoder: (went for my nephew drive test.. he passed)
01:48 PM roycroft: the sun is shining
01:49 PM roycroft: perfect timing - it is lunch time and i want to work on the shop
01:49 PM roycroft: without having to dash in and out of the rain
01:55 PM xxcoder: but thats the fun, the dashing
02:01 PM lcnc-relay: <Travis Farmer> there, got the tax documents to the accountants... hopefully i get a refund back, without too many penalties...
02:02 PM Tom_L: dmv is almost as bad as the dentist
02:02 PM JT-Shop: these are contractors not state workers
02:03 PM lcnc-relay: <ccatlett1984> DMV here is amazing since Covid, self-service kiosk for most things
02:03 PM lcnc-relay: <ccatlett1984> don't have to talk to any people 😄
02:03 PM Tom_L: ...You can also use Q-Less app to reserve a spot in line at some Missouri DMV offices...
02:04 PM JT-Shop: prob in the big city
02:04 PM Tom_L: more than likely
02:04 PM JT-Shop: they still use paper numbers here
02:04 PM JT-Shop: I'll go back in a bit and see if everyone is back from lunch
02:05 PM JT-Shop: got the insurance for the 82 and it's $77 for 6 months...
02:05 PM Tom_L: that's cheap
02:05 PM Tom_L: is it considered antique?
02:05 PM Tom_L: i think it should be
02:05 PM Tom_L: get an antique tag
02:05 PM JT-Shop: 50/100 liability
02:06 PM JT-Shop: an antique tag has restrictions here but yes it does qualify
02:13 PM Tom_L: so now i should be able to show actual spindle rpm
02:15 PM NetPipe: free lambo's at the vallet ?
02:17 PM NetPipe: i one it ?
02:41 PM lcnc-relay: <JT> Did you get the timer working
02:41 PM Tom_L: yes
02:41 PM lcnc-relay: <JT> Cool
02:43 PM Tom_L: doubt i can sim spindle rpm
02:49 PM lcnc-relay: <JT> You should be able to
02:54 PM lcnc-relay: <JT> 5 in front of me and 3 workers so not bad
02:57 PM Tom_L: spindle rpm in sim works
02:58 PM Tom_L: not accurate but it's tied to spindle.0.abs something
03:02 PM Tom_L: doesn't like that too much
03:02 PM Tom_L: it worked the first time
03:04 PM lcnc-relay: <JT> What don't work
03:04 PM Tom_L: i'm trying to reproduce it
03:05 PM Tom_L: some combination of the spindle buttons and the spindle speed hal pin
03:06 PM Tom_L: yeah
03:08 PM Tom_L: http://tom-itx.no-ip.biz:443/~webpage/cnc/JT-SHOP/flexgui/spindle_error.png
03:09 PM Tom_L: estop, power on, home all, FWD button on the spindle
03:09 PM lcnc-relay: <JT> Ok
03:09 PM Tom_L: or any spindle button
03:10 PM Tom_L: you may want this tp3 revision to test it
03:11 PM lcnc-relay: <Travis Farmer> my spindle works fine... or is that just for a sim?
03:14 PM Tom_L: you don't have a hal pin for spindle rpm do you?
03:15 PM lcnc-relay: <Travis Farmer> yes i do
03:15 PM Tom_L: try that sequence then
03:15 PM lcnc-relay: <JT> You have a hal pin by the same name
03:16 PM Tom_L: no it won't let me
03:16 PM Tom_L: oh, spindle_speed?
03:16 PM lcnc-relay: <Travis Farmer> <-- heads out to shop
03:17 PM Tom_L: i fixed it
03:18 PM lcnc-relay: <JT> How
03:18 PM Tom_L: renamed spindle_speed spindle_rpm
03:19 PM Tom_L: for the hal pin
03:20 PM lcnc-relay: <JT> Name conflict
03:21 PM Tom_L: yup
03:22 PM Tom_L: i'll push these changes
03:27 PM Tom_L: JT-Shop, PR #144
03:30 PM lcnc-relay: <Travis Farmer> ok, i see you fixed it, but i am having Estop button issues. with the estop active, i can click power on and it powers on. i click estop and it power off, but i can power back on. shouldn't i have to clear the estop first?
03:30 PM lcnc-relay: <Travis Farmer> hang on, axis does the same thing...
03:31 PM lcnc-relay: <Travis Farmer> maybe that's only if i hit the hardware estop...
03:36 PM Tom_L: look at the logic behind it
03:36 PM Tom_L: i have 3 estops, button, pendant and screen
03:38 PM lcnc-relay: <roguish> Tom_L: hey. i'm finally actually trying some of the probing. well, not sure they are the best.... gotta figure it all out before I try to explain.
03:38 PM Tom_L: they are basic routines
03:38 PM lcnc-relay: <Travis Farmer> yeah, only the hardware estop needs manual reset, i am all set i guess
03:39 PM * roycroft did the first tetris maneuver at lunch time, and is now able to proceed with another section of the wall
03:41 PM lcnc-relay: <Travis Farmer> but when i click the flex tool button estop the color changes and activates, but does not change back when the estop clears
03:42 PM lcnc-relay: <Travis Farmer> the closed/open changes back, but color does not
03:44 PM lcnc-relay: <Travis Farmer> dizzy (low blood sugar) have to go back inside NOW
03:45 PM Tom_L: roguish, tp3 has a cycle timer & spindle rpm now
03:45 PM Tom_L: jt fixed the hal pin input stuff
03:45 PM Tom_L: he'll have to pull it in his repo
03:47 PM roycroft: mitzi gaynor has left the building :(
03:48 PM * roycroft has not watched "south pacific" in a long time, and thinks he needs to do so soon
03:48 PM JT-Shop: Tom_L, did you create a flex hal pin named spindle_speed?
03:49 PM roycroft: i have the entire musical on 12" 78s, so i could play it on my victrola, but mitzi did not star in the broadway troupe
03:50 PM Tom_L: i did but i renamed it
03:51 PM Tom_L: <Tom_L> renamed spindle_speed spindle_rpm
03:52 PM Tom_L: i just pushed the working example
03:55 PM JT-Shop: got it
03:56 PM JT-Shop: I can check for flex hal name conflicts and bitch at the user :)
04:06 PM Unterhaus_ is now known as Unterhausen
04:07 PM Unterhausen: kreg doesn't have a listing of their screws, have to use a selector tool
04:10 PM lcnc-relay: <Lcvette> JT-Shop: quick question on docs if you have a sec, trying to preview the docs but forgot how to make file to have an html preview of my edits before pushing
04:11 PM JT-Shop: for which docs?
04:12 PM lcnc-relay: <Lcvette> in probe basic
04:12 PM lcnc-relay: <Lcvette> spinx
04:13 PM lcnc-relay: <Lcvette> sphinx
04:13 PM JT-Shop: in the dir with the make file just open a terminal and do make html
04:13 PM lcnc-relay: <Lcvette> ah cool thanks!
04:13 PM JT-Shop: you're welcome
04:14 PM Tom_L: i'll wait til morning to make another deb unless you want one
04:14 PM JT-Shop: wait until I test for name conflicts
04:15 PM Tom_L: and add probe enable to the ini color pallet :)
04:15 PM lcnc-relay: <Lcvette> think there is an issue with the venv, getting an error stating "no module named 'qtpyvcp'
04:16 PM JT-Shop: I never use virtual environments
04:20 PM JT-Shop: tried to get my plates for the 82 but the title has not been issued yet so I couldn't get them
04:20 PM Tom_L: gotta wait for the state?
04:20 PM JT-Shop: yup
04:20 PM Tom_L: did they offer a temp tag?
04:20 PM JT-Shop: nope
04:20 PM JT-Shop: temp tags are for new cars
04:21 PM Tom_L: we got all sorts of used heaps running around with paper tags
04:21 PM JT-Shop: I putzed around and didn't do the title for a few weeks and now I'm waiting
04:22 PM JT-Shop: if you buy from a dealer they can print paper tags
04:22 PM Tom_L: i put something in the ui next push, wondering if anybody will find it
04:22 PM JT-Shop: I have plates on the 82 but they are from 19 lol
04:22 PM Tom_L: heh
04:22 PM JT-Shop: but it looks ok from a distance
04:31 PM JT-Shop: alignment shop is booked out for a week so I have an appointment for the 28th
04:31 PM JT-Shop: hurry up and wait lol
04:35 PM Tom_L: PR #145
04:35 PM Tom_L: no boxes yet ehh?
04:35 PM JT-Shop: boxes?
04:36 PM Tom_L: for the pannel
04:36 PM Tom_L: AB
04:36 PM JT-Shop: I have everything but the 3 5hp vfd's and the ethernet switch
04:36 PM Tom_L: oh
04:37 PM JT-Shop: the ethernet switch is in transit... the vfd's in a week or so
04:37 PM JT-Shop: had 12 boxes when I got home from getting the inspection
04:41 PM lcnc-relay: <JT> https://jauriarts.org/_matrix/media/v3/download/matrix.org/spXhjCkSUrhKpVgqzjNDPyzE/20241017_163410_6158209165985039343.jpg
04:42 PM JT-Shop: hmm not found
04:47 PM Tom_L: the matrix post site isn't very reliable
04:48 PM Tom_L: at least across the bridge
04:54 PM JT-Shop: yup
04:54 PM JT-Shop: 125 components make up the panel and the remote stations
04:55 PM Tom_L: what will the remotes do?
04:55 PM JT-Shop: estop, start, stop and some have a pot and one has an up/down selector
04:55 PM JT-Shop: you run the mixers from the remote panels
04:56 PM Tom_L: ok
04:56 PM Tom_L: just small boxes?
04:56 PM lcnc-relay: <TurBoss> pictures not showing ?
04:56 PM Tom_L: no
04:56 PM Tom_L: not across the bridge
04:56 PM JT-Shop: no controls on the main panel as it's under the platform
04:56 PM lcnc-relay: <TurBoss> ouch
04:56 PM lcnc-relay: <TurBoss> thanks I'll check!
04:56 PM Tom_L: :)
04:56 PM JT-Shop: thanks
04:57 PM Tom_L: who do you get your industrial buttons from?
04:58 PM JT-Shop: Hello, I am chips your friendly mascot
04:58 PM Tom_L: haha
04:58 PM JT-Shop: automation direct
04:58 PM JT-Shop: chips > Chips maybe
04:59 PM Tom_L: done
04:59 PM Tom_L: next update anyway
04:59 PM JT-Shop: cool
05:00 PM Tom_L: we've got a Delta Electric Supply here i've gotten a few things from
05:01 PM Tom_L: i should get one for a door bell replacement
05:01 PM Tom_L: maybe it'd last a bit longer
05:02 PM JT-Shop: I have a bunch of AB 800T buttons
05:02 PM JT-Shop: used
05:03 PM Tom_L: the sun hits the one on the back
05:03 PM JT-Shop: I have a box full of 800T push to test indicators and I should just toss them
05:03 PM JT-Shop: they are 120vac
05:14 PM JT-Shop: got a few parts and the paint for the 82 showing up monday
05:15 PM JT-Shop: after I paint the steering components I'll be done with it
05:16 PM JT-Shop: it == steering column and wheel
05:17 PM Tom_L: right
05:17 PM Tom_L: is it a small block or big block?
05:17 PM JT-Shop: 350
05:18 PM Tom_L: an old friend had a 68 camaro small block
05:18 PM JT-Shop: 427 and 454 were not offered after 79 IIRC in a c3
05:18 PM Tom_L: fun
05:20 PM JT-Shop: a friend has a 454 c3 and gave it to his son
05:20 PM JT-Shop: his wife drives a c4 and he drives a c7
05:20 PM _unreal_: so I just finished the cad drawing and am 3d printing a "twist reciver" for the cone air filters I have had sitting on a self for years. I have a mini? 25 ish? gallon metal drum with clamping lid. I'm building the parts to create a cyclone container.
05:21 PM _unreal_: finally well enough to do something
05:21 PM _unreal_: ugh. AN OTHER fusion360 big update :(
05:22 PM _unreal_: can hardly wait to see what they piss me off with this time.
05:23 PM _unreal_: t4nk_fn, whats new?
05:43 PM acer: hum
05:44 PM acer is now known as _unreal_
05:44 PM * JT-Shop calls it a day
05:44 PM _unreal_: are you sure its not a night?
06:35 PM xxcoder: lol. just placed my old lego plate on my refegation door. its glossy black so it looks like tv just starting to show advert for lego...
06:39 PM xxcoder: wow. its very rare now. cheapest is over $200
06:39 PM xxcoder: I got it for much less
06:40 PM xxcoder: looks bent and bit sun faded. mine is still brand new looking
06:54 PM CloudEvil: :)
07:45 PM lcnc-relay: <TurBoss> this is a test of a picture sent to irc from the matrix
07:46 PM lcnc-relay: <TurBoss> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/bbkobvSNymbUjQoUlzZZfOry/centurion_logo.png
07:47 PM lcnc-relay: <TurBoss> do the link work? Tom_L ?
07:47 PM lcnc-relay: <TurBoss> *does
07:54 PM xxcoder: loaded from irc just fine here
08:01 PM lcnc-relay: <TurBoss> ok goin to take a pic with the mobile and see
08:02 PM lcnc-relay: <TurBoss> https://jauriarts.org/_matrix/media/v3/download/jauriarts.org/WiRNglGFoOepgcuaYLlWveTN/20241018_025444_5413676118643585898.jpg
08:02 PM lcnc-relay: <TurBoss> Does it show xxcoder?
08:02 PM xxcoder: some kind of keylogged connected to a board
08:03 PM xxcoder: kidding on logger but yeah [icture shows
08:03 PM lcnc-relay: <TurBoss> okay thank you!
08:05 PM lcnc-relay: <TurBoss> is an esp8266 serial modem
08:05 PM lcnc-relay: <TurBoss> 😄
08:05 PM lcnc-relay: <TurBoss> to dial bbs's
08:05 PM lcnc-relay: <TurBoss> * bbs
08:05 PM lcnc-relay: <TurBoss> from a z80
08:06 PM xxcoder: lol ok
08:09 PM Tom_L: turboss, yes
08:09 PM Tom_L: thanks
08:09 PM lcnc-relay: <TurBoss> thank you!
08:15 PM Tom_L: hopefully i got touch-probe3 connected to all my mill signals
08:16 PM Tom_L: test it tomorrow
08:39 PM lcnc-relay: <xxcodery> np 🙂
08:39 PM xxcoder: np 🙂
08:39 PM xxcoder: ok seems ok now. thanks
08:39 PM lcnc-relay: <TurBoss> dupe messages=?
08:39 PM xxcoder: nah tested it from both ends
08:39 PM lcnc-relay: <turboss> okay
09:41 PM rdtsc is now known as rdtsc_away
10:54 PM roycroft: the expanding foam gun is still working fine
10:55 PM * roycroft has one of the long walls in the shop completely sealed and insulated