#linuxcnc Logs

Mar 25 2023

01:11 AM -!- #linuxcnc mode set to +v by ChanServ
02:05 AM Deejay: moin
04:54 AM travis_farmer[m]: G'Morning ☕️
04:55 AM Tom_L: morning
04:56 AM JT-Cave: morning
06:44 AM Bing[m]: morning
06:46 AM JT-Cave: Tom_L, new release for mesact
08:33 AM Tom_L: forgot to update the header
08:47 AM JT-Cave: crap
08:48 AM JT-Cave: done
08:51 AM Tom_L: too late :)
09:24 AM Tom_L: JT-Cave, #101 up
09:25 AM Tom_L: with the fix
09:33 AM JT-Cave: thanks
09:35 AM Tom_L: np
10:44 AM perry_j1987: morning
11:48 AM menace is now known as Deknos
12:28 PM JT-Shop: https://youtu.be/rc0s8NPpdPE?t=1125
12:29 PM JT-Shop: that's some big boards going through that PM 15" planer
12:33 PM Tom_L: still watchin that guy ehh?
12:34 PM JT-Shop: aye it's addictive lol
12:34 PM Tom_L: i know
12:34 PM Tom_L: i watched a few
12:34 PM roycroft: my workbench top pieces weren't that long but they were about that wide and thick
12:34 PM JT-Shop: I like the way they handled the boards
12:34 PM roycroft: i managed to run them through the thicknesser by myself, because i did not have a helper when i wanted to do it
12:34 PM roycroft: and did not want to wait for a helper
12:36 PM JT-Shop: that's the same planer I hav
12:36 PM JT-Shop: e
01:58 PM unterhaus_: harbor freight sent me a 25% off coupon in an email, except there was no coupon
01:59 PM unterhaus_: nvm, a plugin was blocking it
02:21 PM * JT[m] uploaded an image: (320KiB) < https://libera.ems.host/_matrix/media/v3/download/matrix.org/FqzwVZdvHPGhEoqcvuahjnQe/20230325_141907.jpg >
02:21 PM * JT[m] uploaded an image: (267KiB) < https://libera.ems.host/_matrix/media/v3/download/matrix.org/dwQlUrkDAPkCNfwSLkvScuga/20230325_141940.jpg >
02:21 PM JT-Woodshop: bender improvements
02:28 PM Getty4 is now known as Getty
02:29 PM unterhaus_: JT that's nice. I need to set up my diacro for bends like that.
02:30 PM unterhaus_: It came from the cannondale bike factory, so a lot of the practical pieces were gone since they only bent tubes
02:59 PM JT-Woodshop: it was so long since I used it I forgot how I used it so I just updated it to what made more sense to me
02:59 PM JT-Woodshop: and thanks
02:59 PM * JT-Woodshop measured the expanded metal for a nice fit...
03:17 PM -!- #linuxcnc mode set to +v by ChanServ
04:35 PM * JT[m] uploaded an image: (196KiB) < https://libera.ems.host/_matrix/media/v3/download/matrix.org/zSDLJOELszggURflQtkhkRxc/20230325_162012.jpg >
05:19 PM Tom_L: starting over?
05:21 PM JT-Shop: yep, but I still need to make a test cut
05:23 PM JT-Shop: using a 0.030" tip and 0.030" deep cut this time
05:25 PM Tom_L: pretty wide tip
05:26 PM JT-Shop: first try was with a 0.060" tip
05:27 PM Tom_L: i forget what mine are but not much at all
05:28 PM Tom_L: maybe .010
06:20 PM XXCoder: gonna love saturaday
06:21 PM XXCoder: machinist videos day lol
07:20 PM skunkworks[m]: yes..
07:33 PM roycroft: i'm still working on my books from last year
07:33 PM roycroft: i've been at it all day
07:34 PM roycroft: i'm almost ready to close out for 2022
11:00 PM XXCoder: wow!
11:00 PM XXCoder: https://youtu.be/GuQZrA4cl5E
11:01 PM XXCoder: he works to reproduce 160 year old molding. lots of problems
11:02 PM XXCoder: "pull form" unknown term to me
11:06 PM XXCoder: interesting
11:26 PM XXCoder: man it keeps getting more insane.
11:26 PM XXCoder: guyy is skilled
11:40 PM roycroft: it looks like boiler night again on the blondihacks show
11:40 PM XXCoder: yep
11:40 PM XXCoder: good one
11:40 PM * roycroft just quit work, and is gonna do a bit of chillin
11:41 PM roycroft: i put in about 12 hours today doing bookkeeping work
11:41 PM roycroft: and i'm not quite done
11:41 PM roycroft: but i should be able to finish up in the morning, close out 2022, and generat a p&l
11:42 PM XXCoder: roy I finally printed something today lol
11:42 PM roycroft: awesome
11:42 PM XXCoder: printed fine without any adjustments
11:42 PM roycroft: you've been armchairing things for quite a while
11:43 PM roycroft: the last thing i remember you making was that fancy joinery thing
11:44 PM XXCoder: yeah been a while
11:45 PM roycroft: my air assist pump is going to arrive tomorrow
11:45 PM roycroft: so when i'm finished with the accounting stuff i might be able to play with the laser some more
11:45 PM XXCoder: nice :)
11:45 PM XXCoder: theres interesting program luban
11:46 PM XXCoder: it allows you to turn model into cut slices that you can then laser parts and make into statue
11:46 PM XXCoder: theres been nothing like it so far
11:46 PM roycroft: neat
11:46 PM roycroft: that would be great for making relief maps
11:47 PM XXCoder: https://www.luban3d.com/
11:47 PM XXCoder: its also used for 3d printing cut parts and build, though prusaslicer added that feature recently