#linuxcnc-devel Logs

Nov 11 2024

01:51 AM rmu: knoxmachining: did you see this https://github.com/LinuxCNC/linuxcnc/pull/3165
09:10 AM lcnc-relay: <knoxmachining@discord> I did not. But also. “Note: M9 has been made remappable sometime in the past but calling the built-in 'M9' from inside the remap is currently not possible”
09:10 AM lcnc-relay: <knoxmachining@discord> And is that going in 2.9 or 2.10?
09:14 AM rmu: it is in the 2.10 branch
09:15 AM rmu: will not go into 2.9
09:42 AM lcnc-relay: <zincboy_ca_on@discord> For my remap, I made M7/8/9 work as normal for flood and mist. M27/28/29 are used for extended functions like air blast and the aimed nozzle. That way the normal post and UI works but you just don't have the extra functions. Don't know if that would work for what you are trying to do though.
09:56 AM lcnc-relay: <knoxmachining@discord> I’m attempting to delay the machine by 15 seconds when M8 is turned on at the beginning of the program. Turning off will have a 30 second delay. This is to give dust collector time to come up to speed and won’t shut off or get delayed while doing a tool change (only blast gate will close/open). I really don’t want to do different M codes as this is for a maker space. I have no control over which post...
09:56 AM lcnc-relay: ... processor they’ll use. I can just tell them to use Flood M8 to turn the dust collection on.
09:59 AM lcnc-relay: <knoxmachining@discord> Any time mine on 2.10 release?
10:00 AM lcnc-relay: <knoxmachining@discord> And any chance of getting this backported to 2.9.3 release if that’s going to be a while?
10:00 AM lcnc-relay: <zincboy_ca_on@discord> You can do that in HAL by using the spindle at speed signal.
10:01 AM lcnc-relay: <zincboy_ca_on@discord> Delay the spindle at speed signal by your turn on delay when it sees a flood on signal.
10:02 AM lcnc-relay: <knoxmachining@discord> Sent DM
10:05 AM rmu: i would not hold my breath regarding 2.10
10:14 AM lcnc-relay: <knoxmachining@discord> 😦 I really don't want to have to fork lcnc and compile my own copy. That's gonna suck.
10:14 AM lcnc-relay: <knoxmachining@discord> Already doing that with probe basic and qtpyvcp
01:30 PM lcnc-relay: <roguish000@discord> good day all. What the heck is going on with the Bookworm builds? why are they failing? is anyone working on a fix ????
02:47 PM Unterhaus__ is now known as Unterhausen