#linuxcnc-devel Logs

Jul 08 2020

02:19 AM linuxcnc-build: build #5114 of 1403.rip-wheezy-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/5114 blamelist: andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler
02:24 AM linuxcnc-build: <jepler@gmail.com>, Phillip Carter <phillcarter54@gmail.com>, Jeff Epler <jepler@unpythonic.net>
03:39 AM linuxcnc-build: build #6976 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6976 blamelist: andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@gmail.com>, Phillip Carter
03:39 AM linuxcnc-build: <phillcarter54@gmail.com>, Jeff Epler <jepler@unpythonic.net>
07:55 AM linuxcnc-build: build #178 of 4042.deb-buster-rtpreempt-rpi4 is complete: Failure [4failed shell_3] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4042.deb-buster-rtpreempt-rpi4/builds/178 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
08:13 AM linuxcnc-build: build #5116 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/5116 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
09:43 AM linuxcnc-build: build #6979 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6979 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
01:32 PM andypugh: The LinuxCNC hack-chat on Hackaday begins in 40 minutes: https://hackaday.io/event/173261-linux-in-the-machine-shop-hack-chat
01:32 PM andypugh: (I was “volunteered” for this by a friend who works for Hackaday)
01:36 PM jepler: I tried promoting it on adafruit's discord, maybe some folks from there will show up. There's at least one machinist and some people who have interests in that area.
01:39 PM cradek: I'm attempting to sign up
01:41 PM cradek: is this chat room thing what I'm supposed to find? no video etc?
01:45 PM andypugh: It’s just like IRC
01:46 PM andypugh: (fortunately)
01:46 PM cradek: perfect, then I'm in the right place.
01:56 PM andypugh: cradek: If you joined, you seem to have done is stealthily
01:56 PM cradek: I said "Hi Andy"
01:56 PM andypugh: Ah
01:57 PM ColonelKlink is now known as CaptHindsight
01:58 PM andypugh: You were quick off the mark
02:05 PM cradek: andypugh: I expect you to know about every piece of software that has ever controlled a machine tool, and compare and contrast them for me. I'll be watching closely to find something to argue about.
02:05 PM andypugh: :-)
02:09 PM cradek: ooh I approve of a moderator starting us on time
02:10 PM rmu|w: did it begin already?
02:14 PM CaptHindsight: rmu|w: yes, just minutes ago
04:50 PM andypugh: I even managed to mention the parallel port without being told that they don’t exist any more, or that LinuxCNC was stupid and old fashioned for insisting on them.
04:51 PM skunkworks: andypugh: a success then?
04:51 PM andypugh: I think so. I was hoping for a few more interesting questions, I had to work a bit to keep things moving.
07:21 PM skunkworks: http://electronicsam.com/images/greenmachine/IMG_20200708_190635.jpg
07:24 PM andypugh: That’s one of your little threads that look too coarse/
07:25 PM andypugh: What spec is it?
07:27 PM skunkworks: heh.. 12mm hex.. 1/2 29 thread
07:27 PM skunkworks: 20
07:27 PM skunkworks: omg
07:28 PM skunkworks: 1/4 20 thread
07:29 PM skunkworks: it is what fit the stock.. no video yet as the second run to video crashed the tool. stupid mistake
07:29 PM Tom_L: i thought the 2nd run was supposed to be the fixed one?
07:30 PM andypugh: I was thinking you must have huge hands if that was a 1/2” thread
07:30 PM Tom_L: i've been having fun with thread mills lately. the spindle is too weak to rigid tap
07:32 PM Tom_L: skunkworks, how many passes did that take?
07:37 PM skunkworks: to make the hex?
07:38 PM skunkworks: or thread?
07:38 PM Tom_L: the thread
07:38 PM skunkworks: heh.. not sure it happened so fast
07:39 PM skunkworks: 1000rpm
07:39 PM skunkworks: maybe 20 at the most
07:42 PM skunkworks: the second run was all run continuous
07:43 PM skunkworks: and it takes the polygon comp a second to find the index
07:43 PM Tom_L: you did that with your comp trickery?
07:44 PM skunkworks: yes. on the emco
07:44 PM Tom_L: ahh, i thought you cnc'd it "normally"
07:44 PM skunkworks: first ever following error
07:45 PM skunkworks: Tom_L: who are you talking to?
07:45 PM Tom_L: you
07:45 PM skunkworks: i dont do anything normal
07:46 PM skunkworks: ;)
07:47 PM Tom_L: you did the hex then too i presume
07:47 PM Tom_L: naw... i see extrusion marks
07:48 PM Tom_L: oops... zooming in i can see that's cut
07:48 PM skunkworks: yes.. laithed the hex
07:49 PM Tom_L: that's cool
07:52 PM skunkworks: pretty edge case :)