#linuxcnc-devel Logs

Apr 19 2020

12:00 AM linuxcnc-build: build #2459 of 4020.deb-jessie-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4020.deb-jessie-rtpreempt-amd64/builds/2459 blamelist: Phillip Carter <phillcarter54@gmail.com>
04:48 AM linuxcnc-build: build #3901 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/3901 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:48 AM linuxcnc-build: build #3904 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/3904 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:52 AM linuxcnc-build: build #4823 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/4823 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:52 AM linuxcnc-build: build #4822 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/4822 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:53 AM linuxcnc-build: build #3814 of 1903.clang-wheezy-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1903.clang-wheezy-amd64/builds/3814 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:53 AM linuxcnc-build: build #3163 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/3163 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:53 AM linuxcnc-build: build #3194 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/3194 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:55 AM linuxcnc-build: build #4342 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/4342 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:56 AM linuxcnc-build: build #5026 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/5026 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
04:58 AM linuxcnc-build: build #3813 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/3813 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:01 AM linuxcnc-build: build #5332 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/5332 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:02 AM linuxcnc-build: build #5332 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/5332 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:03 AM linuxcnc-build: build #6664 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/6664 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:04 AM linuxcnc-build: build #4161 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/4161 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:04 AM linuxcnc-build: build #6661 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/6661 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:05 AM linuxcnc-build: build #5882 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/5882 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:50 AM linuxcnc-build: build #3591 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/3591 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:53 AM linuxcnc-build: build #2573 of 4021.deb-jessie-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4021.deb-jessie-i386/builds/2573 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:54 AM linuxcnc-build: build #4494 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/4494 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:55 AM linuxcnc-build: build #2570 of 4022.deb-jessie-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4022.deb-jessie-amd64/builds/2570 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
05:56 AM linuxcnc-build: build #2462 of 4019.deb-jessie-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4019.deb-jessie-rtpreempt-i386/builds/2462 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
06:01 AM linuxcnc-build: build #2460 of 4020.deb-jessie-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4020.deb-jessie-rtpreempt-amd64/builds/2460 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
06:32 AM linuxcnc-build: build #6683 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6683 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
07:35 AM andypugh: jepler: rene_dev_ Are you about?
07:35 AM andypugh: (Might be one for the mailing list)
07:51 AM rene_dev_: rene_dev_ yes
07:52 AM rene_dev_: not awake yet andypugh
07:52 AM rene_dev_: looking into the compiler-fixes test failure
07:52 AM rene_dev_: still cant write to the list
07:53 AM andypugh: Just wondering what the state of play is with the XHC driver. I have found an easy way to make it compile, but I am not clear if the same fixes are already in the LinuxCNC repo
07:55 AM rene_dev_: driver works, I set it up just yesterday on a friends machine
07:56 AM andypugh: I mean I have found an easy way to make it compile in Wheezy
07:57 AM rene_dev_: ok, put it in then
07:57 AM rene_dev_: and include it in 2.8
07:57 AM andypugh: It is the flag -std=c++11
07:57 AM rene_dev_: remove it?
07:57 AM andypugh: No, add it
07:57 AM andypugh: (I think)
07:58 AM andypugh: It keeps appearing in the makefiles, I am getting properly confused
07:58 AM rene_dev_: ah. newer compilers probably default to it
07:58 AM andypugh: I don’t know if is becomes a setting in gcc that the make scripts then use or something
07:59 AM andypugh: gcc-4 defaults to C++98
07:59 AM rene_dev_: where did you add it? cflags?
07:59 AM andypugh: That’s the question. It works in the Submakefile of the driver. But also doesn’t break anything if put in the main Makefile instead
08:00 AM rene_dev_: yes, it only enables newer stuff.
08:00 AM rene_dev_: I think its safe to put it in
08:00 AM andypugh: Let’s try it.
08:06 AM rene_dev_: nice, halrun segfaults when you initialize some uninitialized variables
08:12 AM andypugh: But might -std=c++11 also turn off some newer-than-11 stuff? I guess we can worry about that when LinuxCNC starts to need some of it.
08:14 AM rene_dev_: currently linuxcnc doesnt use any of that :D
08:14 AM rene_dev_: just go to a higher std when needed
08:14 AM rene_dev_: halrun cannot ever have worked
08:14 AM andypugh: I am puzzled by how -std=c++11 keeps appearing in the Makefile.inc of my Wheezy now
08:15 AM andypugh: How do you mean “halrun can not ever have worked” ? I use it all the time.
08:17 AM rene_dev_: https://github.com/LinuxCNC/linuxcnc/blob/master/src/hal/utils/halcmd_main.c#L279
08:17 AM rene_dev_: clang complains that elinenext is used uninitialized, which is correct
08:18 AM rene_dev_: if I set it to zero, it obviously crashes, because it dereferences a null pointer
08:22 AM andypugh: Well, it gets initied in the section aboc if !extend_ct
08:22 AM andypugh: What happens if you initialise it in line 272
08:23 AM rene_dev_: doestn make a difference
08:23 AM rene_dev_: no, it doesnt always inizialize
08:23 AM rene_dev_: even gcc complains
08:23 AM rene_dev_: hal/utils/halcmd_main.c:279:21: warning: argument 1 null where non-null expected [-Wnonnull]
08:23 AM rene_dev_: strncpy(elinenext,raw_buf,newLinePos);
08:23 AM rmu|w: it may be -std=c++ disables auto_ptr
08:24 AM andypugh: I am just going by the comments
08:24 AM rene_dev_: rmu|w this is c
08:24 AM rmu|w: sorry -std=c++11
08:24 AM rmu|w: i am half an hour late it seems
08:25 AM rmu|w: referring to XHC driver
08:25 AM andypugh: Before “if (!extend_ct)” you could have “elinenext=eline” as an initialisation
08:27 AM andypugh: Actually, it is still potentially uninitialised in line 287
08:27 AM rene_dev_: exactly, and that is why it crashes when you set it to 0
08:28 AM rene_dev_: set it to 0 here
08:28 AM rene_dev_: https://github.com/LinuxCNC/linuxcnc/blob/master/src/hal/utils/halcmd_main.c#L262
08:28 AM rene_dev_: any try halrun -f
08:29 AM andypugh: Init it to eline in 269 ?
08:30 AM rene_dev_: no
08:30 AM rene_dev_: breaks the parser
08:30 AM rene_dev_: test.hal:7: Unknown command 'count=2'
08:41 AM rmu|w: how can this ever work
08:42 AM rmu|w: elinenext probably has to be moved out of the loop
08:45 AM rene_dev_: undefined bahaviour, thats why :D
08:47 AM rene_dev_: fixed
09:24 AM linuxcnc-build: build #3290 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/3290 blamelist: Rene Hopf <renehopf@mac.com>
09:34 AM linuxcnc-build: build #6684 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6684 blamelist: Rene Hopf <renehopf@mac.com>
09:39 AM linuxcnc-build: build #6666 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/6666 blamelist: andypugh <andypugh@localhost.localdomain>
09:39 AM linuxcnc-build: build #6663 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/6663 blamelist: andypugh <andypugh@localhost.localdomain>
09:39 AM linuxcnc-build: build #5884 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/5884 blamelist: andypugh <andypugh@localhost.localdomain>
09:51 AM -!- #linuxcnc-devel mode set to +v by ChanServ
10:13 AM andypugh: It looks like I need a Precise VM setting up. But I don’t sem to be able to find the .iso Any ideas?
10:17 AM Tom_L: andypugh, is it the one in the links here? https://forum.linuxcnc.org/38-general-linuxcnc-questions/30077-linuxcnc-2-6-live-cd-download#67043
10:18 AM andypugh: No, that is Debian 7
10:18 AM Tom_L: was precise ubuntu?
10:19 AM andypugh: Yes.
10:19 AM andypugh: But, there is a link there to allow setting up Precise from the stock IOS
10:19 AM andypugh: LinuxCNC only has the following on the server:
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-10.04-linuxcnc1-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-8.04-desktop-emc2-aj10-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-8.04-desktop-emc2-aj12-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/emc2-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/emc2.0.4-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/emc2.2.1-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/emc2.2.2-1-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-10.04-linuxcnc2-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-10.04-linuxcnc3-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-8.04-desktop-emc2-aj07-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/iso/ubuntu-8.04-desktop-emc2-aj13-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/binary.hybrid.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org-backup.2015-11-10/linuxcnc-2.7-wheezy.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-10.04-linuxcnc1-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-8.04-desktop-emc2-aj10-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-8.04-desktop-emc2-aj12-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/emc2-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/emc2.0.4-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/emc2.2.1-ubuntu6.06-desktop-i386.iso
10:20 AM andypugh: 9,1./www.linuxcnc.org/iso/emc2.2.2-1-ubuntu6.06-desktop-i386.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-10.04-linuxcnc2-i386.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-10.04-linuxcnc3-i386.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-8.04-desktop-emc2-aj07-i386.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/iso/ubuntu-8.04-desktop-emc2-aj13-i386.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/iso/linuxcnc-2.7.14-wheezy.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/binary.hybrid.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/linuxcnc-2.7-wheezy.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-amd64-r9.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-i386-r9.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-amd64-r10.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-i386-r10.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-amd64-r11.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-i386-r11.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-amd64-r8.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/old/linuxcnc-stretch-uspace-i386-r8.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/linuxcnc-stretch-uspace-i386-r12.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/linuxcnc-stretch-uspace-amd64-r12.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/linuxcnc-stretch-uspace-i386-r13.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/linuxcnc-stretch-uspace-amd64-r13.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/linuxcnc-stretch-uspace-i386.iso
10:21 AM andypugh: 9,1./www.linuxcnc.org/stretch/linuxcnc-stretch-uspace-amd64.iso
10:21 AM andypugh: Hmm, that went well....
10:21 AM andypugh: That’s dark blue on black here
10:22 AM linuxcnc-build: build #6685 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6685 blamelist: andypugh <andypugh@localhost.localdomain>
10:23 AM Tom_L: green on black :)
10:27 AM rene_dev_: andypugh if you cant even find an iso, doesnt that mean something? ;D
10:28 AM andypugh: The buildbot is running it...
10:31 AM rene_dev_: why does the buildbot fail on my compiler fix branch?
10:32 AM andypugh: Only with Jessie?
10:32 AM andypugh: Convenient view: http://buildbot.linuxcnc.org/buildbot/grid
10:33 AM andypugh: Just the twopass fails
10:34 AM linuxcnc-build: build #48 of 1650.rip-buster-rtpreempt-rpi4 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1650.rip-buster-rtpreempt-rpi4/builds/48 blamelist: Rene Hopf <renehopf@mac.com>
10:35 AM andypugh: It looks to be a difference in the _owner_ of the and2 modules.
10:36 AM andypugh: I don’t think there is much of that that is your fault.
10:36 AM linuxcnc-build: build #6667 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/6667 blamelist: Rene Hopf <renehopf@mac.com>
10:36 AM linuxcnc-build: build #4825 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/4825 blamelist: Rene Hopf <renehopf@mac.com>
10:36 AM linuxcnc-build: build #5885 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/5885 blamelist: Rene Hopf <renehopf@mac.com>
10:36 AM linuxcnc-build: build #6664 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/6664 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #4826 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/4826 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #4497 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/4497 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #4345 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/4345 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #5029 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/5029 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #3292 of 1500.rip-jessie-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/3292 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #1682 of 1610.rip-stretch-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/1682 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #3292 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/3292 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #1682 of 1630.rip-stretch-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1630.rip-stretch-rtpreempt-amd64/builds/1682 blamelist: Rene Hopf <renehopf@mac.com>
10:37 AM linuxcnc-build: build #3294 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/3294 blamelist: Rene Hopf <renehopf@mac.com>
10:38 AM linuxcnc-build: build #288 of 1640.rip-buster-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1640.rip-buster-rtpreempt-amd64/builds/288 blamelist: Rene Hopf <renehopf@mac.com>
10:38 AM linuxcnc-build: build #94 of 1635.rip-buster-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1635.rip-buster-rtpreempt-i386/builds/94 blamelist: Rene Hopf <renehopf@mac.com>
10:38 AM linuxcnc-build: build #3295 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/3295 blamelist: Rene Hopf <renehopf@mac.com>
10:39 AM linuxcnc-build: build #3817 of 1903.clang-wheezy-amd64 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1903.clang-wheezy-amd64/builds/3817 blamelist: Rene Hopf <renehopf@mac.com>
10:44 AM linuxcnc-build: build #3816 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/3816 blamelist: Rene Hopf <renehopf@mac.com>
10:44 AM linuxcnc-build: build #6686 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6686 blamelist: Rene Hopf <renehopf@mac.com>
11:08 AM rene_dev_: andypugh if the tests pass, I will merge compiler fixes and pocket fix in 2.8
11:09 AM rene_dev_: and then test 2.8 branch on my machines
11:11 AM andypugh: I am making a Precise VM. I quite like Precise.
11:16 AM sync: jepler: when I source the rip-environment my shell just closes... what do?
11:16 AM alex_joni: sync: open one that doesn't close
11:16 AM alex_joni: like ctrl-alt-f1
11:16 AM alex_joni: and check the error message
11:16 AM Tom_L: andypugh, what version ubuntu was precise?
11:17 AM andypugh: 12
11:17 AM alex_joni: 12.04.5 LTS. Precise Pangolin
11:17 AM Tom_L: i found a 10.04cd
11:18 AM Tom_L: goin the wrong way.. 8.04
11:21 AM sync: alex_joni: then it will just log me out
11:22 AM sync: as it kills the shell
11:31 AM alex_joni: that shouldn't really happen
11:31 AM alex_joni: can you pastebin the contents of your rip-environment?
11:36 AM alex_joni: andypugh: managed the precise VM?
11:36 AM alex_joni: the instruction mention running a regular Precise, then install linuxcnc/kernel
11:36 AM alex_joni: http://linuxcnc.org/docs/html/getting-started/getting-linuxcnc.html#_installing_on_ubuntu_precise
11:37 AM andypugh: alex_joni: Yes.
11:37 AM andypugh: Though setting the grub default to memtests wasn’t a good step on the way
12:14 PM rmu|w: sync: open another shell in the cmd line
12:14 PM rmu|w: bash
12:14 PM rmu|w: then source rip-env
12:17 PM rene_dev_: andypugh I merged both branches into 2.8
12:18 PM andypugh: OK, let’s see how it goes
12:20 PM rene_dev_: now fixing 2.8 into master merge conflicts
12:25 PM sync: rmu|w: sure, I just wonder why it breaks in something else than a bash
12:25 PM sync: has somebody tried updating the classicladder that is included with linuxcnc?
12:26 PM sync: there are some div by 0 bugs hidden in there now
12:26 PM rmu|w: sync: i investigated what it would take to update classicladder and immediately gave up. that was 3 or 4 years ago.
12:27 PM sync: well, then I'll just fix the bugs in
12:28 PM sync: it's also not really helpful that classicladder is distributed as an archive only
12:29 PM rmu|w: classicladder was changed quite a bit to integrate into linuxcnc. and the classicladder code is more or less unreadable. imho.
12:30 PM rene_dev_: I ran the clang analyzer, and like 50% of the problems are in clasicladder
12:30 PM rmu|w: then i had a look at ldmicro https://github.com/LDmicro/LDmicro/releases which seems to actually have an architecture
12:30 PM rmu|w: but the gui is windows-only
12:30 PM rmu|w: i have a proof-of-concept port of the editor to imgui somewhere
12:31 PM rene_dev_: I dont understand why you would use something like that, when you can just code c or python
12:31 PM sync: because electricians understand it
12:31 PM rmu|w: you can change ladder diagrams "on the fly" on the running machine
12:31 PM rene_dev_: electricians should not be allowed to use cnc machines ;D
12:32 PM rene_dev_: rmu|w I cant imagine how that can go wrong with a toolchanger :D
12:32 PM sync: ahhhh rmu|w, I just looked into emc_mods.c and got whiplash
12:32 PM rene_dev_: classicladder v7.124
12:33 PM rene_dev_: 9.113 is current
12:33 PM rmu|w: ;)
12:33 PM sync: he also just fixed the div by 0 bugs 4 months ago
12:34 PM sync: but emc_mods.c is formatted in a very special way...
12:34 PM rmu|w: there are a number of bugs in classicladder, e.g. if you run out of timers, it is wrapping around in some strange way
12:34 PM rmu|w: etc...
12:34 PM rene_dev_: I never used it
12:38 PM rmu|w: additionally, the editor has some foot-guns that are not really bugs
12:41 PM rmu|w: sync: put it through clang-format to make it readable ;)
12:44 PM linuxcnc-build: build #3902 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/3902 blamelist: Dewey Garrett <dgarrett@panix.com>
12:44 PM rene_dev_: andypugh have you given up?
12:44 PM rene_dev_: refering to XHCWHB04B06: Simply don't try to compile
12:44 PM andypugh: Yes.
12:44 PM andypugh: For Precise
12:45 PM linuxcnc-build: build #3905 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/3905 blamelist: Dewey Garrett <dgarrett@panix.com>
12:45 PM andypugh: Should still compile for Wheezy
12:45 PM andypugh: And newer
12:45 PM sync: rmu|w: then the linuxcnc pullrequest police will stab me
12:46 PM linuxcnc-build: build #4162 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/4162 blamelist: Dewey Garrett <dgarrett@panix.com>
12:46 PM rene_dev_: andypugh tlo test fails, with some new error
12:46 PM rene_dev_: emc/task/emctask.cc 396: interp_error: G43.2: No axes specified and H word missing
12:47 PM linuxcnc-build: build #5333 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/5333 blamelist: Dewey Garrett <dgarrett@panix.com>
12:47 PM andypugh: That was fixed
12:47 PM linuxcnc-build: build #5333 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/5333 blamelist: Dewey Garrett <dgarrett@panix.com>
12:47 PM rene_dev_: https://github.com/LinuxCNC/linuxcnc/commit/8e47d56c4442f40a58fd7225b5ae423dbeb0d293
12:47 PM andypugh: rene_dev_: Which branch are you on? G43.2 <axes> should only be in master
12:48 PM rmu|w: sync: shouldn't be too hard to retro-format any patches to original style to keep merge noise down
12:48 PM rene_dev_: Im merging 2.8 into master
12:48 PM andypugh: rene_dev_: You want the master version of that
12:49 PM rene_dev_: there wasnt even a conflict
12:49 PM andypugh: Wierd
12:52 PM rene_dev_: it is the master version
12:54 PM linuxcnc-build: build #3195 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/3195 blamelist: Dewey Garrett <dgarrett@panix.com>
12:54 PM rene_dev_: I knew gene would be the first to reply. its sunday, doesnt he go to church or somehting?
12:57 PM rmu|w: probably sheltering at home
12:57 PM linuxcnc-build: build #3164 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/3164 blamelist: Dewey Garrett <dgarrett@panix.com>
01:09 PM rene_dev_: andypugh did anything else change with g43?
01:10 PM andypugh: between what and when?
01:17 PM jepler: Well I missed a lot today
01:17 PM rene_dev_: G43.2
01:17 PM jepler: Was any of it still waiting for my input?
01:18 PM andypugh: None f mine at the moment.
01:29 PM andypugh: jepler: One thing of interest, with Precise the configure stage outputs “checking whether g++ supports C++11 features with -std=c++0x... yes” which seems to be not entirely true.
01:30 PM andypugh: It adds the -std=c++0x flag, but that isn’t enough to compile the xhcwb06 driver.
01:30 PM jepler: Yeah if it's called 0x it's sure to be partial support
01:31 PM jepler: Sigh
01:31 PM andypugh: OK, so it’s likely to just be a recycled message (it’s in a loop) rather than a C++11 test that has been badly chosen?
01:31 PM jepler: I did put together a patch to disable it based on compiler support, or maybe it's close and someone can finish it?
01:32 PM andypugh: It’s not a big deal, it only affects precise and that was never distributed as an ISO, so probably isn’t in use very much anywhere.
01:32 PM jepler: before C++11 came out, many people assumed the successor of C++03 would come out in the 200x, so they called the provisional flag -std=c++0x
01:33 PM jepler: -std=c++0x is the way on that compiler to get closest to support for C++11 constructs, but there are many omissions
01:33 PM andypugh: Anyway, WHB06 is now “fixed” in precise by ignoring it if the GCC version < 4.7
01:34 PM jepler: that is fine by me. thank you, and thank the author
01:36 PM andypugh: The lack of buildbot moaning on this channel is a good sign, 2.8 is now compiling on wheezy and precise _with_ the new driver.
01:41 PM rene_dev_: andypugh done, pass. lets see what the bot says
01:46 PM andypugh: jepler: Ah, so 0x was after 03? I assumed that it became 03
01:46 PM linuxcnc-build: build #3592 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/3592 blamelist: Dewey Garrett <dgarrett@panix.com>
01:51 PM linuxcnc-build: build #2571 of 4022.deb-jessie-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4022.deb-jessie-amd64/builds/2571 blamelist: Dewey Garrett <dgarrett@panix.com>
01:51 PM linuxcnc-build: build #2574 of 4021.deb-jessie-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4021.deb-jessie-i386/builds/2574 blamelist: Dewey Garrett <dgarrett@panix.com>
01:53 PM linuxcnc-build: build #2463 of 4019.deb-jessie-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4019.deb-jessie-rtpreempt-i386/builds/2463 blamelist: Dewey Garrett <dgarrett@panix.com>
02:00 PM linuxcnc-build: build #2461 of 4020.deb-jessie-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4020.deb-jessie-rtpreempt-amd64/builds/2461 blamelist: Dewey Garrett <dgarrett@panix.com>
02:51 PM rene_dev_: andypugh Im trying to think what else is new in 2.8 for the release notes
02:51 PM rene_dev_: and, thinking about the future
02:51 PM rene_dev_: what is the difference to 2.9?
02:52 PM andypugh: 2.9 has the G43.2, G71/G72
02:52 PM andypugh: statetags
02:52 PM rene_dev_: oh, is that merged now?
02:52 PM rene_dev_: nice
02:53 PM Tom_L: is run from here with remap still an issue?
02:53 PM Tom_L: not a big deal just wondered
02:53 PM rene_dev_: I feel like those things should be documented already
02:54 PM Tom_L: remap seemed to break it
02:56 PM andypugh: Hmm, I am now not sure if statetags was mereged
02:56 PM rene_dev_: the fact that tormach has been using it for years tells me that it shouldbe stable
02:57 PM andypugh: Looking back, I got as far as making a new statetags branch
03:01 PM linuxcnc-build: build #3906 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/3906 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:01 PM linuxcnc-build: build #3903 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/3903 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:08 PM linuxcnc-build: build #3196 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/3196 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:10 PM linuxcnc-build: build #3165 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/3165 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:10 PM linuxcnc-build: build #5334 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/5334 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:13 PM linuxcnc-build: build #5334 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/5334 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:14 PM linuxcnc-build: build #4163 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/4163 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
03:50 PM andypugh: trying to rebase the statetags to master again. It is proving to be quite a chore
04:07 PM rene_dev_: jepler are you around?
04:07 PM jepler: Only on my mobile phone
04:07 PM linuxcnc-build: build #2572 of 4022.deb-jessie-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4022.deb-jessie-amd64/builds/2572 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
04:08 PM linuxcnc-build: build #2575 of 4021.deb-jessie-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4021.deb-jessie-i386/builds/2575 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
04:08 PM rene_dev_: the makefiel touches every python script anyway, for syntax ckeching and stuff
04:08 PM rene_dev_: can you think of a way that the makefile can make sure the script is always started with the correct shebang?
04:09 PM rene_dev_: the syntax check uses $(PYTHON) but that doesnt affect the script later
04:12 PM linuxcnc-build: build #2464 of 4019.deb-jessie-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4019.deb-jessie-rtpreempt-i386/builds/2464 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
04:14 PM linuxcnc-build: build #3593 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/3593 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
04:19 PM linuxcnc-build: build #2462 of 4020.deb-jessie-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4020.deb-jessie-rtpreempt-amd64/builds/2462 blamelist: Rene Hopf <renehopf@mac.com>, Jeff Epler <jepler@gmail.com>, Sebastian Kuzminsky <seb@highlab.com>
04:54 PM andypugh: The latest state-tags rebase appears to be imperfect.
04:54 PM andypugh: 126 failed tests levels of imperfect
05:05 PM jepler: renedev my memory is the makefile was supposed to copy and fix the shebang line, but update_ini is not copied by the makefile, it is already in place
05:16 PM andypugh: Bah! I know why the tests fail, I accidentally booted in to 4.19.114-rtai, and that is broken
05:19 PM linuxcnc-build: build #3904 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/3904 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler <jepler@gmail.com>
05:19 PM linuxcnc-build: build #3907 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/3907 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler <jepler@gmail.com>
05:27 PM linuxcnc-build: build #3197 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/3197 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler
05:27 PM linuxcnc-build: <jepler@gmail.com>
05:29 PM linuxcnc-build: build #5335 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/5335 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler <jepler@gmail.com>
05:30 PM linuxcnc-build: build #3166 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/3166 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler
05:30 PM linuxcnc-build: <jepler@gmail.com>
05:31 PM linuxcnc-build: build #5335 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/5335 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler <jepler@gmail.com>
05:33 PM linuxcnc-build: build #4164 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/4164 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler
05:33 PM linuxcnc-build: <jepler@gmail.com>
05:34 PM andypugh: These are Lintian fails during deb building
05:45 PM andypugh: OK, so where does tests/abort/g64/test.ini come from? It isn’t there in the tree
06:31 PM linuxcnc-build: build #3594 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/3594 blamelist: Sync <sync@sync-hv.de>, Sebastian Kuzminsky <seb@highlab.com>, Rene Hopf <renehopf@mac.com>, andypugh <andy@bodgesoc.org>, Jeff Epler
06:31 PM linuxcnc-build: <jepler@gmail.com>
07:35 PM linuxcnc-build: build #3905 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/3905 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync@sync-hv.de>
07:35 PM linuxcnc-build: build #3908 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/3908 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync@sync-hv.de>
07:41 PM linuxcnc-build: build #5336 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/5336 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync@sync-
07:41 PM linuxcnc-build: hv.de>
07:43 PM linuxcnc-build: build #5336 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/5336 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync@sync-hv.de>
07:44 PM linuxcnc-build: build #4165 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/4165 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync
07:44 PM linuxcnc-build: @sync-hv.de>
07:54 PM linuxcnc-build: build #3198 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/3198 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>,
07:54 PM linuxcnc-build: Sync <sync@sync-hv.de>
07:55 PM linuxcnc-build: build #3167 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/3167 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync
07:55 PM linuxcnc-build: <sync@sync-hv.de>
07:58 PM rene_dev_: jepler I cant see where the makefile does that
08:00 PM andypugh: We seem to have a lot of files that are executable and shouldn’t be.
08:02 PM andypugh: I guess that some bash magic along the lines of find . -name *.ngc | chmod -x would fix that, but I am prepared to bet that _particular_ thing wouldn’t work at all.
08:02 PM Tom_L: so is master on github broke right now?
08:02 PM Tom_L: i was gonna grab a copy
08:02 PM rene_dev_: they are not executed by the python set during configure
08:03 PM rene_dev_: Tom_L no
08:03 PM Tom_L: these are all test branches?
08:03 PM rene_dev_: andypugh Im on python3 stuff, I really dont like how dgarr did some things
08:03 PM andypugh: Tom_L: http://buildbot.linuxcnc.org/buildbot/grid
08:04 PM andypugh: Master compiles and passes tests, but isn’t building debs
08:05 PM Tom_L: ok
08:11 PM andypugh: I really want to push statetags, because I am bored of rebasing it.
08:12 PM andypugh: It’s so big that it takes about an hour of manual conflict resolution every time.
08:13 PM andypugh: But I know some of the tests fail.
08:14 PM andypugh: I wonder if there is a way to disable individual tests?
08:14 PM rene_dev_: andypugh it takes hours of manually fixing python stuff :D
08:14 PM rene_dev_: andypugh git mv the folder somewhere else. why do they fail?
08:15 PM andypugh: In some cases I don’t even know how they work, let alone how they fail.
08:15 PM rene_dev_: you can run them individually, not with the runtest script
08:15 PM andypugh: Yes, I know.
08:16 PM rene_dev_: but by going in the folder and running them
08:16 PM rene_dev_: usually more helpful
08:16 PM andypugh: But I still don’t know how some of them work.
08:16 PM andypugh: abort/g64 for example/
08:17 PM andypugh: (new test for statetags, the commit that introlduced it mentions that it demonstrates a bug…)
08:19 PM Tom_L: helpful
08:41 PM linuxcnc-build: build #3595 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/3595 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync
08:41 PM linuxcnc-build: @sync-hv.de>
08:44 PM linuxcnc-build: build #2577 of 4021.deb-jessie-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4021.deb-jessie-i386/builds/2577 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync@sync-hv.de>
08:45 PM linuxcnc-build: build #2466 of 4019.deb-jessie-rtpreempt-i386 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4019.deb-jessie-rtpreempt-i386/builds/2466 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync
08:45 PM linuxcnc-build: <sync@sync-hv.de>
08:45 PM linuxcnc-build: build #2574 of 4022.deb-jessie-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4022.deb-jessie-amd64/builds/2574 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>, Sync <sync@sync-hv.de>
08:49 PM linuxcnc-build: build #2464 of 4020.deb-jessie-rtpreempt-amd64 is complete: Failure [4failed shell_3 shell_4] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/4020.deb-jessie-rtpreempt-amd64/builds/2464 blamelist: Rene Hopf <renehopf@mac.com>, andypugh <andypugh@localhost.localdomain>, Jeff Epler <jepler@gmail.com>, andypugh <andy@bodgesoc.org>,
08:49 PM linuxcnc-build: Sync <sync@sync-hv.de>
09:07 PM rene_dev_: why is it that every one of my emails to the list goes completely offtopic
09:25 PM andypugh: It’s annoying, is it not?
09:54 PM linuxcnc-build: build #6672 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/6672 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
09:54 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
09:54 PM linuxcnc-build: build #6669 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/6669 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
09:54 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
09:57 PM andypugh: Oops! forgot to git-add the “skip"
09:58 PM andypugh: OK, time to sleep. But I will leave this thing on
09:58 PM linuxcnc-build: build #5890 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/5890 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel
09:58 PM linuxcnc-build: Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:02 PM linuxcnc-build: build #53 of 1650.rip-buster-rtpreempt-rpi4 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1650.rip-buster-rtpreempt-rpi4/builds/53 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel
10:02 PM linuxcnc-build: Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:06 PM linuxcnc-build: build #4831 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/4831 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
10:06 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:06 PM linuxcnc-build: build #4830 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/4830 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
10:06 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:07 PM linuxcnc-build: build #1687 of 1630.rip-stretch-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1630.rip-stretch-rtpreempt-amd64/builds/1687 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek
10:07 PM linuxcnc-build: <chris@timeguy.com>, Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:08 PM linuxcnc-build: build #3297 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/3297 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
10:08 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:08 PM linuxcnc-build: build #3297 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/3297 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>,
10:08 PM linuxcnc-build: Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:09 PM linuxcnc-build: build #1687 of 1610.rip-stretch-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/1687 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>,
10:09 PM linuxcnc-build: Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:09 PM linuxcnc-build: build #3299 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/3299 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
10:09 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:09 PM linuxcnc-build: build #293 of 1640.rip-buster-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1640.rip-buster-rtpreempt-amd64/builds/293 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>,
10:09 PM linuxcnc-build: Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:09 PM linuxcnc-build: build #5034 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/5034 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>,
10:09 PM linuxcnc-build: Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:13 PM linuxcnc-build: build #4350 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/4350 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>,
10:13 PM linuxcnc-build: Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:14 PM linuxcnc-build: build #99 of 1635.rip-buster-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1635.rip-buster-rtpreempt-i386/builds/99 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel
10:14 PM linuxcnc-build: Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:14 PM linuxcnc-build: build #3300 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/3300 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>,
10:14 PM linuxcnc-build: Daniel Rogge <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:18 PM linuxcnc-build: build #4502 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/4502 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge
10:18 PM linuxcnc-build: <drogge@tormach.com>, Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:18 PM linuxcnc-build: build #6691 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6691 blamelist: John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Robert W. Ellenberg <rwe24g@gmail.com>, Chris Radek <chris@timeguy.com>, Daniel Rogge <drogge@tormach.com>, Jeff Epler
10:18 PM linuxcnc-build: <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>
10:55 PM linuxcnc-build: build #3298 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/3298 blamelist: andypugh <andy@bodgesoc.org>
10:57 PM linuxcnc-build: build #3300 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/3300 blamelist: andypugh <andy@bodgesoc.org>
10:57 PM linuxcnc-build: build #5035 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/5035 blamelist: andypugh <andy@bodgesoc.org>
11:06 PM linuxcnc-build: build #6692 of 0000.checkin is complete: Failure [4failed] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/6692 blamelist: andypugh <andy@bodgesoc.org>