#linuxcnc-devel | Logs for 2017-01-08

[07:43:23] <KGB-linuxcnc> 03John Thornton 05qtvcp-2.7 5b7d39d 06linuxcnc 10configs/sim/qtscreen/qtdefault.ini fix ini so tool table can be found * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=5b7d39d
[11:14:06] <seb_kuzminsky> jepler: yeah, bye bye flaky buildslave
[11:14:50] <seb_kuzminsky> a more motivated and energetic buildbot manager might bring down the wheezy-armhf slave, swap disks, and see if the problem follows the hardware or the software
[11:15:07] <seb_kuzminsky> and if it follows hardware, buy new hardware for the second armhf slave
[11:47:40] <jepler> seb_kuzminsky: even though I did the work I don't think ARM debs are important for LinuxCNC right now... more important to get x86 builds by a wide margin
[11:52:00] <pcw_home> If its hardware, would a TX1 help? (seems like the highest performance Arm with SATA thats not terribly expensive)
[12:17:34] <jepler> I think seb_kuzminsky thinks the hardware's just flaky
[12:18:11] <jepler> the odroid u3s and xu4s are not bad speed-wise for building linuxcnc, particularly if you spring for the e-MMC module instead of using a micro SD for main storage
[12:18:21] <jepler> (I think the buildslaves were both u3s)
[19:28:14] -linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15robEllenberg opened issue #222: Multi-turn arcs incorrectly being converted to straight feeds 02https://github.com/LinuxCNC/linuxcnc/issues/222
[20:03:28] -linuxcnc-github:#linuxcnc-devel- [13linuxcnc] 15robEllenberg commented on issue #222: I have a fix in progress in [this branch](https://github.com/robEllenberg/linuxcnc-mirror/tree/bugfix/issue-222-ncd-multiturn-arcs) in my fork. I haven't tested it much yet, but so far it works for some simple test cases.... 02https://github.com/LinuxCNC/linuxcnc/issues/222#issuecomment-271197759