#linuxcnc-devel | Logs for 2016-12-28

[09:54:17] <JT-Shop> skunksleep: have you seen the new logger?
[09:56:52] <pcw_home> CaptHindsight: yes tough to find and $$ because Cali
[10:00:07] <pcw_home> Place we got was a 7-11 in a former life
[13:56:42] <JT-Shop> pcw_home: is there a bit file for the 5i25 with 7i76 on P3 and a bob on P2?
[13:59:03] <pcw_home> maybe, which BOB?
[14:00:06] <JT-Shop> lol, all he said was a basic bob
[14:00:23] <JT-Shop> I didn't see anything in my collection that looked right
[14:04:24] <pcw_home> if its just for GPIO almost ant 7i76 config will work
[14:04:30] <pcw_home> any
[14:04:43] <JT-Shop> ok thanks
[14:37:22] <pcw_mesa> if you need one with more stepgens or something on P2 I can cobble one together
[14:38:51] <JT-Shop> ok, I think he was just asking
[14:57:29] <JT-Shop> so you can connect a single card like a 7i70 to the 7i76 TB3 RS-422?
[14:57:58] <pcw_mesa> yes
[14:59:41] <pcw_mesa> you need to take a CAT5 patch cable and cut it in half and terminate it in the 6 pin terminal block (the 7I76 manual has the wire colors)
[14:59:56] <JT-Shop> yea reading that now
[15:00:04] <JT-Shop> do you have to do anything with firmware?
[15:01:23] <pcw_mesa> no
[15:04:25] <JT-Shop> cool
[19:10:20] <Roguish> hey pcw_mesa, gotta move the company? where to? staying in Richmond?
[19:13:09] <pcw_mesa> Moving to El Sobrante
[19:13:29] <Roguish> on Dam Road?
[19:14:55] <pcw_mesa> On Appian
[19:15:02] <Roguish> moving is such a joy.
[19:15:10] <pcw_mesa> I know :-(
[19:15:11] <Roguish> at least it's a good way to clean house.....
[19:15:41] <pcw_mesa> Thats Katharines viewpoint
[19:16:08] <Roguish> when do you start schlepping stuff?'
[19:17:25] <andypugh> Ate you droving the sheep?
[19:17:33] <andypugh> (are)
[19:23:18] <andypugh> I seem to have forgotten the URL to the admin interface…
[19:23:34] <andypugh> (after offering to manually reset a password)
[19:27:03] <andypugh> Got it
[19:31:06] <pcw_mesa> moving in March or so
[19:53:06] <KGB-linuxcnc> 03Chris Morley 05qtvcp-2.7 2f5ece3 06linuxcnc 10src/emc/usr_intf/qtscreen/qtscreen.py qtscreen -event filters should be loaded only with a handler file * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2f5ece3
[19:53:06] <KGB-linuxcnc> 03Chris Morley 05qtvcp-2.7 4315936 06linuxcnc 10lib/python/qtvcp_widgets/simple_widgets.py 10lib/python/qtvcp_widgets/widget_plugins/simplewidgetsplugin.py qtvcp -add a slider widget * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4315936
[19:53:06] <KGB-linuxcnc> 03Chris Morley 05qtvcp-2.7 724c8d9 06linuxcnc 10lib/python/qtvcp_widgets/widget_plugins/simplewidgetsplugin.py qtvcp -add some default values to the slider * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=724c8d9
[20:00:09] <andypugh> Looks like Chris is being busy?
[20:01:12] <andypugh> I thought that Glade was “The Answer” when it was introduced, but there really does seem to be absolutely no support at all if you have a problem.
[20:02:10] <andypugh> As in, not a single reply to a query sent to IRC, mailing list and the professional developers listed on the project front page.
[20:32:57] <linuxcnc-build> build #2814 of 1400.rip-wheezy-i386 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/2814 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>
[20:39:14] <linuxcnc-build> build #1282 of 1520.rip-jessie-amd64 is complete: Failure [4failed runtests] Build details are at http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/1282 blamelist: Chris Morley <chrisinnanaimo@hotmail.com>