#linuxcnc-devel | Logs for 2016-05-17

[08:06:02] <skunkworks> Ran all night
[08:08:51] <archivist> I sleep at night :)
[08:52:33] <skunkworks> heh
[10:48:27] <skunkworks> 201us
[10:57:11] <pcw_home> same laptop?
[11:55:05] <skunkworks> pcw_home, yes - using a pci express card
[11:55:24] <skunkworks> the one jepler linked (random shot in the dark)
[11:55:54] <skunkworks> without speed stepping - the processor peaks at 2.8ghz and only gets to 61c
[11:56:29] <pcw_home> funny, wonder if theres some power management nonsense on the built in Ethernet port
[11:59:49] <pcw_home> Not sure a laptop KB is much good in a swarfy environment but it does make a good portable linuxCNC demo system
[12:03:41] <skunkworks> yes - or a development system
[12:04:05] <skunkworks> that you hook up to real hardware
[12:08:30] <skunkworks> pcw_home, http://pastebin.com/avEx34KZ
[12:18:43] <skunkworks> there are vauge references to the intel nic having latency issues with the e1000e driver
[12:19:29] <skunkworks> had to update the firmware on the 7i92 - didn't have the dpll stuff in it
[12:26:44] <jepler> skunkworks: it's cool that the expresscard nic works. I'm glad you dared to try it.
[12:31:49] <skunkworks> :)
[12:32:00] <skunkworks> could probably run 2khz
[12:32:17] <pcw_home> Its a surprise that makes so much difference
[12:34:09] <pcw_home> The H97 has a newer intel MAC and is seems fine
[12:34:17] <pcw_home> it seems
[12:43:08] <pcw_home> hmm sserial is broken in eth-packet-loss
[12:46:29] <pcw_home> looks like hal outputs are not updated ( hm2_7i76e.0.7i76.0.0.input-00 hm2_7i76e.0.7i76.0.0.input-00-not both false )
[12:46:31] <pcw_home>
[13:11:35] <jepler> is .run set true
[13:11:36] <jepler> ?
[13:26:25] <PCW> Not sure (thats system at home I'll check here)
[13:32:56] <PCW> no, it was false
[13:40:56] <jepler> I was surprised to have to set .run true, but I didn't go back and check if master branch is the same
[13:41:00] <jepler> I didn't intentionally change it
[13:43:16] <PCW> master is OK
[13:43:45] <jepler> OK thanks for checking
[13:44:05] <jepler> so .run starts TRUE in master, FALSE in branch?
[13:44:16] <PCW> Yes
[13:44:56] <PCW> I just happened to check the field voltage and it read 0V
[13:47:58] <jepler> ah, I removed the setting of run to TRUE from hm2_sserial_force_write
[17:51:33] <JT-JA14> I wonder what the classicladder save button does... it doesn't save the file
[17:52:36] <seb_kuzminsky> it saves your sould
[17:52:49] <JT-JA14> my sould?
[17:52:57] <seb_kuzminsky> *soul
[17:53:07] <JT-JA14> seems only Save As actually saves the file
[17:53:21] <JT-JA14> I like sould better
[17:55:29] <emcPT> sold is even better
[17:58:05] <JT-JA14> dang if I'm making dakgangjeong tonight I better quit putzing around out here and get started
[19:08:45] <andypugh> my rip-environment script is empty. Very puzzling.
[19:09:21] <andypugh> rip-environment.in is still there, what’s the magic incantgation to regnerate rip-environment?
[20:08:05] <andypugh> skunkworks: Which branch is the Matsu running?
[20:32:55] <skunkworks> 2.7.4 I think
[20:34:02] <skunkworks> the current 2.7. release
[20:37:25] <seb_kuzminsky> i'm glad 2.7 is being useful
[20:51:57] <skunkworks> they have all been very useful
[21:04:00] <seb_kuzminsky> glo is very slow for me
[21:04:13] <seb_kuzminsky> i can connect to it, but the ssh server is not real snappy like
[23:09:33] <KGB-linuxcnc> 03andypugh 05master 6b46650 06linuxcnc 10configs/sim/axis/vismach/VMC_toolchange/toolchange_gray.hal 10configs/sim/axis/vismach/VMC_toolchange/toolchange_index.hal 10src/hal/components/carousel.comp carousel.comp: Add pins to enable jogging of the carousel. * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=6b46650
[23:09:52] <andypugh> skunkworks: ^