Back
[00:12:39] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 9d6a704 06linuxcnc 10lib/python/hal_glib.py hal_glib.py remove debug print * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=9d6a704
[00:12:40] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 fcfbca6 06linuxcnc 10configs/sim/touchy/ngcgui/hwsim.sh 10configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini 10docs/src/getting-started/updating-linuxcnc.txt 10src/emc/usr_intf/touchy/emc_interface.py touchy: jog in teleop mode,fail if not identity JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fcfbca6
[00:12:40] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 b7fc8be 06linuxcnc 10docs/src/getting-started/updating-linuxcnc.txt 10src/emc/usr_intf/gscreen/emc_interface.py gscreen:jog in teleop mode,fail if not identity JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b7fc8be
[00:12:43] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 383aba0 06linuxcnc 10(15 files in 12 dirs) axis.py remove provisions for AUTO_TELEOP JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=383aba0
[00:12:47] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 a240914 06linuxcnc 10src/emc/motion/command.c 10src/emc/motion/homing.c 10src/emc/usr_intf/axis/scripts/axis.py Merge ja13-teleop-after-homing-->joints_axes13 JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a240914
[00:12:51] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 3bc5ac9 06linuxcnc 10docs/src/getting-started/updating-linuxcnc.txt updating-linuxcnc.txt: add status of old guis JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=3bc5ac9
[00:12:55] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 e5cf04d 06linuxcnc 10docs/src/getting-started/updating-linuxcnc.txt 10src/emc/usr_intf/gmoccapy/gmoccapy.py gmoccapy:jog in teleopmode,fail if not identity JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e5cf04d
[00:13:00] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 c833bce 06linuxcnc 10src/emc/motion/homing.c homing.c clr local homing_flag if checkAllHomed JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c833bce
[00:22:20] <seb_kuzminsky> linuxcnc-build: force build --branch=v2.5_branch --revision=v2.5.5 0000.checkin
[00:22:26] <linuxcnc-build> The build has been queued, I'll give a shout when it starts
[00:25:39] <seb_kuzminsky> dgarr: thanks for merging that
[00:26:17] <seb_kuzminsky> the ja13-teleop-after-homing branch was a little out of date, given the changes i'd made in master earlier this week, but we can fix that up next time we rebase ja onto master
[00:26:33] <seb_kuzminsky> i'd be happy to do that next time
[01:29:28] <linuxcnc-build> build forced [ETA 1h22m35s]
[01:29:28] <linuxcnc-build> I'll give a shout when the build finishes
[03:45:56] <linuxcnc-build> Hey! build 0000.checkin #4122 is complete: Success [3build successful]
[03:45:57] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/4122
[03:47:26] <linuxcnc-build> build #306 of 4017.5.deb-wheezy-armhf is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4017.5.deb-wheezy-armhf/builds/306
[06:24:32] <emc> is there a deb for ja13?
[08:57:11] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 211f8a7 06linuxcnc 10configs/sim/axis/axis_9axis.ini 10docs/src/getting-started/updating-linuxcnc.txt updating-linuxcnc.txt no spaces module param = JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=211f8a7
[08:57:11] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes13 c5a2e44 06linuxcnc 10src/emc/motion/homing.c 10src/emc/task/taskintf.cc taskintf.cc,homing.c bug fixes ini pins,special JA * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c5a2e44
[09:09:48] <seb_kuzminsky> emc
[09:09:54] <seb_kuzminsky> emc: yes, we have ja debs
[09:10:18] <seb_kuzminsky> they're in the 'scratch' repo, details here:
http://buildbot.linuxcnc.org/
[09:11:00] <seb_kuzminsky> cradek: looks like the 2.5.5 debs finished, i'll push them to wlo later this morning
[09:35:32] <cradek> thank you! I bet running my old pushem script would be bad in these modern times
[10:02:50] <seb_kuzminsky> cradek: it might now know about the newer distros
[10:03:05] <cradek> yeah I'd have to massage it, and I'd get it wrong
[10:03:10] <cradek> thanks for dealing with it for me
[10:03:53] <skunkworks_> Yay - (although I will probably never use it..) :)
[10:04:44] <cradek> I had forgotten it had motiony bugfixes
[10:04:49] <cradek> more than one
[10:04:51] <cradek> those are important
[10:05:01] <cradek> people are probably still using it (on hardy)
[10:05:27] <cradek> heck, I might be still using it on my big machines
[10:05:29] <cradek> who knows!
[10:56:08] <skunkworks_> :)
[11:12:29] <skunkworks_> The mailing list issue with the usb drive - I thought changing to a different file would fix the eject issue.. It doesn't - it says the /usr/bin/python /usr/bin/axis -ini /home/skunkworks/linucnc/configs/sim.ais/axis.ini has it
[11:13:16] <skunkworks_> recent file list maybe?
[11:13:44] <archivist> would have to go back to user dir /whatever
[11:17:48] <skunkworks_> that is what I did was opened a recent file that was in the /home/user/linuxcnc/nc_files
[11:21:41] <archivist> I have had similar cannot unmount problems in the past, can even be the file manager forgetting to let go of the handles
[11:24:09] <seb_kuzminsky> cradek: the 2.5.5 debs are rsyncing to wlo right now
[15:52:20] <seb_kuzminsky> emc: did you see my answer to your question about ja debs up above?
[16:03:26] <jepler> a user of the web forum has asked me to change his username to "LearningLinuxCNC", "to relate my user to the YouTube Channelto relate my user to the YouTube Channelto relate my user to the YouTube Channelto relate my user to the YouTube Channelto relate my user to the YouTube Channel that I have opened for LinuxCNC purposes."
[16:03:47] <jepler> since nothing would stop a user from signing up with this name, is there some reason I shouldn't change his username, if the UI of joomla lets me (I haven't gotten that far)
[16:04:20] <cradek> it sounds like you have a weird feeling about it
[16:04:42] <jepler> hm there are more than a few "NitroCH3NO2 wrote"s in the forum
[16:11:15] <jepler> eh what does it hurt, vs telling him to register a fresh forum account with whatever name he likes today
[16:11:34] <cradek> yeah, I can't argue with that
[16:12:05] <kwallace> Does anyone have a favorite source for PCB milling bits? I'm hoping to give it a try.
[16:13:36] <jepler> kwallace: back in the day, cradek directed me at these folks:
http://www.precisebits.com/applications/pcbtools.htm
[16:14:23] <cradek> yes, I use
http://www.precisebits.com/products/carbidebits/scoreengrave.asp
[16:14:26] <jepler> hmm I don't think they had the tapered trace isolation tools back then, just the V-tips. that should be an improvement
[16:15:14] <cradek> interesting
[16:16:16] <jepler> hm I don't understand their table for depth of cut on the right side
http://www.precisebits.com/products/carbidebits/tapered_stub_125.asp
[16:16:31] <jepler> at 0.010in depth you get both .0039 and .0051 inch diameter ?
[16:17:07] <cradek> heh I bet you get .0039 if your machine is metric, otherwise you get .005
[16:17:48] <kwallace> Thank you for the link. I found some on eBay in sets of ten, but I would rather get a couple different kinds to figure out what I like.
[16:18:38] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 56b1b4e 06linuxcnc 10src/emc/rs274ngc/interp_o_word.cc 03tests/interp/subs-follow-main/expected 03tests/interp/subs-follow-main/test.ngc 03tests/interp/subs-follow-main/test.sh Fix subs breaking when placed after main program * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=56b1b4e
[16:18:38] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 c939d5f 06linuxcnc 10(79 files in 19 dirs) M98/M99 subprograms * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c939d5f
[16:18:38] <KGB-linuxcnc> 03Jason Penn 05zultron/m98m99 a7b2f54 06linuxcnc 10src/emc/rs274ngc/interp_read.cc Made interp_read.cc ignore "O" words that are not an "O" word but just a program title, i.e. "OBoreProject", * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a7b2f54
[16:18:42] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 82af9b1 06linuxcnc 03tests/interp/sprutcam-mach-post-bug/expected 03tests/interp/sprutcam-mach-post-bug/test.ngc 03tests/interp/sprutcam-mach-post-bug/test.sh Test for previous commit, "OBoreProject" * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=82af9b1
[16:19:00] <jepler> my limited experience with depth rings was that I still had to carefully touch off for the fine trace isolation milling, but then I could change to drilling and not touch off Z again
[16:19:30] <cradek> I use a length sensor now, and if I didn't have that I'd immediately add it, knowing what I know now
[16:19:45] <kwallace> Oops, they also only have 10-packs.
[16:19:58] <cradek> kwallace: it's easy to break the tips off. get extras...
[16:21:34] <kwallace> Will 10k RPM be nearly enough?
[16:21:50] <cradek> yes, if you're patient
[16:21:57] <cradek> 20k would sure be better
[16:22:07] <cradek> you end up cutting a LOT of distance
[16:22:12] <cradek> at like .0005"/tooth
[16:22:45] <linuxcnc-build> build #2270 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/2270 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:22:45] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:22:45] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:23:21] <linuxcnc-build> build #1936 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1936 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:23:21] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:23:21] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:23:22] <linuxcnc-build> build #4110 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/4110 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:23:23] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:23:23] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:23:44] <linuxcnc-build> build #1781 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/1781 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky
[16:23:44] <linuxcnc-build> <seb@highlab.com>, John <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris
[16:23:44] <linuxcnc-build> <john@zultron.com>, Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:24:12] <linuxcnc-build> build #3321 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/3321 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>,
[16:24:12] <linuxcnc-build> John <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:24:12] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:24:45] <linuxcnc-build> build #4112 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/4112 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:24:45] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:24:45] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:25:08] <jepler> I wonder what platform it did build on :-/
[16:25:50] <linuxcnc-build> build #1264 of 1903.clang-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1903.clang-wheezy-amd64/builds/1264 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:25:50] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:25:50] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:26:16] <linuxcnc-build> build #2271 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/2271 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:26:16] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:26:16] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:26:19] <linuxcnc-build> build #738 of 1500.rip-jessie-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/738 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:26:19] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:26:19] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:26:32] <linuxcnc-build> build #738 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/738 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky
[16:26:32] <linuxcnc-build> <seb@highlab.com>, John <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris
[16:26:32] <linuxcnc-build> <john@zultron.com>, Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:26:37] <linuxcnc-build> build #2468 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/2468 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky
[16:26:37] <linuxcnc-build> <seb@highlab.com>, John <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris
[16:26:37] <linuxcnc-build> <john@zultron.com>, Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:26:54] <linuxcnc-build> build #738 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/738 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:26:54] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:26:54] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:27:08] <linuxcnc-build> build #738 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/738 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky
[16:27:08] <linuxcnc-build> <seb@highlab.com>, John <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris
[16:27:08] <linuxcnc-build> <john@zultron.com>, Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:27:18] <linuxcnc-build> build #2304 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/2304 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John
[16:27:18] <linuxcnc-build> <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:27:18] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:27:33] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 3439e7c 06linuxcnc 10src/emc/rs274ngc/interp_internal.hh fixup m98/m99 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=3439e7c
[16:27:55] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 3439e7c 06linuxcnc 10src/emc/rs274ngc/interp_internal.hh fixup m98/m99 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=3439e7c
[16:32:55] <jepler> I gave up on home-fabricated boards. I don't need fast turnaround, and 2-sided with silkscreen and soldermask is so cheap now with companies like oshpark that the one or two times a year a project reaches the PCB stage I don't hesistate to use them
[16:33:48] <linuxcnc-build> build #1264 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/1264 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>,
[16:33:49] <linuxcnc-build> John <jt@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>,
[16:33:49] <linuxcnc-build> Michael Geszkiewicz <micges@wp.pl>, Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:33:49] <linuxcnc-build> build #4124 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/4124 blamelist: Brian Hicks <hicksbr@gmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Al Smart <smartmachinetool@yahoo.com>, Sebastian Kuzminsky <seb@highlab.com>, John <jt@gnipsel.com>, Dewey Garrett
[16:33:50] <linuxcnc-build> <dgarrett@panix.com>, andypugh <andy@bodgesoc.org>, Jason Penn <jpenn@tormach.com>, Balestrino <salvatore.balestrino@gmail.com>, Chris Morley <chrisinnanaimo@hotmail.com>, Boris Skegin <boris.skegin.de at gmail.com>, Moses McKnight <moses@texband.net>, John Thornton <bjt128@gmail.com>, John Morris <john@zultron.com>, Michael Geszkiewicz <micges@wp.pl>,
[16:33:50] <linuxcnc-build> Chris Radek <chris@timeguy.com>, Norbert Schechner <nieson@web.de>, Jan Mr?zek <email@honzamrazek.cz>, dummy, Jeff Epler <jepler@unpythonic.net>, chris morley <chrisinnanaimo@hotmail.com>, John Thornton <jt@gnipsel.com>, Bernhard M. Wiedemann <bwiedemann@suse.de>
[16:37:13] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 eada9c6 06linuxcnc 10(79 files in 19 dirs) M98/M99 subprograms * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=eada9c6
[16:37:13] <KGB-linuxcnc> 03Jason Penn 05zultron/m98m99 b082fb5 06linuxcnc 10src/emc/rs274ngc/interp_read.cc Made interp_read.cc ignore "O" words that are not an "O" word but just a program title, i.e. "OBoreProject", * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b082fb5
[16:37:13] <KGB-linuxcnc> 03John Morris 05zultron/m98m99 a6719d0 06linuxcnc 03tests/interp/sprutcam-mach-post-bug/expected 03tests/interp/sprutcam-mach-post-bug/test.ngc 03tests/interp/sprutcam-mach-post-bug/test.sh Test for previous commit, "OBoreProject" * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a6719d0
[16:37:55] <linuxcnc-build> build #2271 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/2271 blamelist: John Morris <john@zultron.com>
[16:38:06] <linuxcnc-build> build #4111 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/4111 blamelist: John Morris <john@zultron.com>
[16:38:29] <linuxcnc-build> build #1782 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/1782 blamelist: John Morris <john@zultron.com>
[16:38:50] <linuxcnc-build> build #739 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/739 blamelist: John Morris <john@zultron.com>
[16:39:05] <linuxcnc-build> build #3322 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/3322 blamelist: John Morris <john@zultron.com>
[16:39:16] <linuxcnc-build> build #4113 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/4113 blamelist: John Morris <john@zultron.com>
[16:39:34] <linuxcnc-build> build #2272 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/2272 blamelist: John Morris <john@zultron.com>
[16:40:08] <linuxcnc-build> build #2305 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/2305 blamelist: John Morris <john@zultron.com>
[16:40:11] <linuxcnc-build> build #739 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/739 blamelist: John Morris <john@zultron.com>
[16:40:16] <linuxcnc-build> build #2469 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/2469 blamelist: John Morris <john@zultron.com>
[16:40:20] <linuxcnc-build> build #1937 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1937 blamelist: John Morris <john@zultron.com>
[16:40:21] <linuxcnc-build> build #739 of 1500.rip-jessie-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/739 blamelist: John Morris <john@zultron.com>
[16:40:32] <linuxcnc-build> build #739 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/739 blamelist: John Morris <john@zultron.com>
[16:41:14] <linuxcnc-build> build #1265 of 1903.clang-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1903.clang-wheezy-amd64/builds/1265 blamelist: John Morris <john@zultron.com>
[16:49:00] <linuxcnc-build> build #1265 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/1265 blamelist: John Morris <john@zultron.com>
[16:49:01] <linuxcnc-build> build #4125 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/4125 blamelist: John Morris <john@zultron.com>
[18:27:55] <linuxcnc-build> build #3324 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/3324 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[18:41:52] <linuxcnc-build> build #4115 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/4115 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[18:42:25] <linuxcnc-build> build #4113 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/4113 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[18:56:36] <linuxcnc-build> build #2273 of 1400.rip-wheezy-i386 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/2273 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[18:57:14] <linuxcnc-build> build #1784 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/1784 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[18:59:15] <linuxcnc-build> build #2274 of 1403.rip-wheezy-amd64 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/2274 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:08:51] <linuxcnc-build> build #1939 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1939 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:09:45] <linuxcnc-build> build #2307 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/2307 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:16:10] <linuxcnc-build> build #2471 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/2471 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:16:50] <linuxcnc-build> build #741 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/741 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:24:25] <linuxcnc-build> build #741 of 1520.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1520.rip-jessie-amd64/builds/741 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:25:55] <linuxcnc-build> build #741 of 1530.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1530.rip-jessie-rtpreempt-amd64/builds/741 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:27:08] <linuxcnc-build> build #741 of 1510.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1510.rip-jessie-rtpreempt-i386/builds/741 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:27:09] <linuxcnc-build> build #4127 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/4127 blamelist: Jason Penn <jpenn@tormach.com>, dummy, John Morris <john@zultron.com>
[19:42:23] <jepler> I hope zultron is seeing these errors
[20:53:53] <KGB-linuxcnc> 03Jeff Epler 05master aebad41 06linuxcnc fast forward * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=aebad41
[21:08:50] <skunkworks> https://www.youtube.com/watch?v=XntXTuXNfvE
[21:29:17] <skunkworks> andypugh,
https://www.youtube.com/watch?v=XntXTuXNfvE
[21:37:46] <skunkworks> only threw the tool on the table once...
[21:39:42] <KGB-linuxcnc> 03Jeff Epler 05jepler/master/eth-packet-loss 4e941df 06linuxcnc 10src/hal/drivers/mesa-hostmot2/hm2_eth.c 10src/hal/drivers/mesa-hostmot2/hostmot2.c 10src/hal/drivers/mesa-hostmot2/tram.c hostmot2: Treat -EAGAIN from hm2_finish_read specially * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4e941df
[21:39:42] <KGB-linuxcnc> 03Jeff Epler 05jepler/master/eth-packet-loss 130245b 06linuxcnc 10src/hal/drivers/mesa-hostmot2/tram.c hostmot2: fix trivial typo in diagnostic message * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=130245b
[21:39:42] <KGB-linuxcnc> 03Jeff Epler 05jepler/master/eth-packet-loss 8d76388 06linuxcnc 10src/hal/drivers/mesa-hostmot2/sserial.c hostmot2: sserial: eliminiate long delay in force_write * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=8d76388
[21:40:34] <jepler> https://emergent.unpythonic.net/files/sandbox/eth-sserial-recovers.png
[22:45:31] <seb_kuzminsky> that's cool, jepler
[22:53:38] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 aa24b2c 06linuxcnc 10debian/changelog 03docs/src/common/Getting_LinuxCNC.txt Merge remote-tracking branch 'origin/v2.5_branch' into 2.6 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=aa24b2c
[22:56:50] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 2e5ee77 06linuxcnc 10debian/changelog Merge remote-tracking branch 'origin/2.6' into 2.7 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2e5ee77
[23:00:38] <KGB-linuxcnc> 03Sebastian Kuzminsky 05master fd89643 06linuxcnc 10debian/changelog 10docs/src/getting-started/updating-linuxcnc.txt 10src/emc/motion/motion.c 10src/hal/hal_priv.h Merge remote-tracking branch 'origin/2.7' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fd89643
