Back
[00:21:58] <KGB-linuxcnc> 03chris morley 05panelui 1927755 06linuxcnc 10lib/python/gladevcp/hal_lightbutton.py gladevcp -add option to make buttons momentary * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1927755
[00:21:58] <KGB-linuxcnc> 03chris morley 05panelui e1f7879 06linuxcnc 10lib/python/gladevcp/hal_bar.py gladevcp: -if the limits are bilateral change color bilaterally * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e1f7879
[00:21:58] <KGB-linuxcnc> 03chris morley 05panelui 13eefba 06linuxcnc 03src/hal/components/sim_matrix_kb.comp component: sim_matrix_kb: converts HAL pin logic to keycodes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=13eefba
[00:22:01] <KGB-linuxcnc> 03Chris Morley 05panelui 7b2e3d4 06linuxcnc 10(14 files in 4 dirs) component: panelui -add keyscan to ui command decoder * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7b2e3d4
[00:22:04] <KGB-linuxcnc> 03chris morley 05panelui 94c7e21 06linuxcnc 10(5 files in 2 dirs) docs: add some official docs for panelui * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=94c7e21
[00:22:08] <KGB-linuxcnc> 03chris morley 05panelui e6ddd1b 06linuxcnc 10(10 files) sim config: add a sample sim config for panelui * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e6ddd1b
[02:29:09] <linuxcnc-build> build #2039 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/2039 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[06:39:19] <jthornton> sudo apt-get install linux-image-rt-686-pae returns unable to locate package, did the name change?
[06:44:24] <jthornton> or I skipped a step, starting over again
[07:09:56] <jthornton> tried it twice and got E: Unable to locate package linux-image-rt-686-pae
[07:10:13] <Tom_itx> 17 quakes overnight
[07:10:38] <Tom_itx> 4.7 4.8 kicked it off
[07:11:06] <jthornton> yikes
[07:11:38] <Tom_itx> in Ok
[07:11:42] <Tom_itx> but we feel those
[07:47:24] <KGB-linuxcnc> 03Jeff Epler 052.7 f7bda07 06linuxcnc fast forward * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f7bda07
[07:49:35] <KGB-linuxcnc> 03Jeff Epler 05master 3d430ba 06linuxcnc 10debian/control.in 10docs/src/Submakefile Merge remote-tracking branch 'origin/2.7' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=3d430ba
[07:49:35] <KGB-linuxcnc> 03Jeff Epler 05master 0221b06 06linuxcnc 10docs/src/Submakefile don't permit xsltproc to use the network * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=0221b06
[07:51:33] <jepler> seb_kuzminsky: looks like a buildslave hung again
http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/983
[07:53:22] <jepler> and hmph it's not one of the jessies this time
[09:58:11] <seb_kuzminsky> jepler: i'm on it
[10:02:28] <seb_kuzminsky> jthornton: debian stopped shipping the rt-preempt kernel you're looking for
[10:03:46] <jepler> seb_kuzminsky: thank you
[10:11:44] <seb_kuzminsky> it's bounced & back
[10:12:05] <seb_kuzminsky> i wonder if it's the cold that's making the buildbot so flaky - it's freezing in my garage
[10:12:39] <seb_kuzminsky> jthornton: i have on my to-do list a task to build our own rt-preempt kernels, but i haven't gotten to it yet :-/
[10:13:55] <jepler> I've had computers at my wife's office, which goes unheated nights and weekends, that crashed regularly during the winter and not at other times of the year
[10:14:05] <jepler> I scoffed and scoffed that it could be the cold, but that was the pattern
[10:14:15] <jepler> and then there was my internet connection that would fail at 4AM but only on cold days..
[10:16:17] <seb_kuzminsky> when i'm rich and famous i'm ging to have a real data center in my house
[10:16:20] <seb_kuzminsky> and a heated shop
[10:16:50] <cradek> sorry, it's rich and infamous that usually go together
[10:17:15] <seb_kuzminsky> jepler: i squashed your halcompile userspace build stuff into my earlier broken commits, and rebased the whole mess from 2.7 to master, so you can remove the jepler/thermistor branch if you want
[10:17:19] <seb_kuzminsky> thanks for the help
[10:17:32] <jepler> seb_kuzminsky: ok, thanks
[10:17:33] <seb_kuzminsky> i think i'm going to add count= and names=,,, support to halcompile's userspace
[10:17:42] <seb_kuzminsky> after my run
[10:17:43] <seb_kuzminsky> bbl!
[10:17:53] <pcw_home> jthornton: if you are brave you can build your own preempt-rt kernel: freeby.mesanet.com/makert4.1.15
[10:18:26] <KGB-linuxcnc> 05jepler/thermistor 31fe16b 06linuxcnc 04. branch deleted * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=31fe16b
[10:22:03] <pcw_home> you need to at the minimum set the 32/64 bittedness and preemption model (in processor types and features) to "Fully Preemptable Kernel"
[10:22:13] <pcw_home> (in xconfig)
[10:27:36] <seb_kuzminsky> oh yeah, i meant to show you guys this:
http://highlab.com/~seb/linuxcnc/scorbot-er-3/scorbot-drawing-1.jpg
[10:28:20] <archivist> why is it drawing on the roof
[10:28:44] <jepler> it must be an image with an exif rotation specified
[10:28:53] <jepler> my ff shows it as expected, but it loaded from the bottom up
[10:28:53] <jepler> afk
[10:29:37] <cradek> seb_kuzminsky: awesome!
[10:29:41] <archivist> is that what you made the differential comp for
[10:30:36] <archivist> I still have this bookmarked
http://highlab.com/~seb/linuxcnc/scorbot-er-3/0302152207.jpg
[10:53:20] <linuxcnc-build> build #3860 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3860 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[11:08:10] <skunkworks> seb_kuzminsky, ja?
[11:51:15] <jepler> neat, this guy used a BBB PRU to convert Apple video to HDMI.
http://lukazi.blogspot.com/2015/08/a2-serial-video-to-hdmi-converter.html
[12:37:04] <pcw_home> 14 instructions so roughly 14 MHz sampling
[12:56:32] <pcw_home> I think the PRU has some fancy serial interface hardware but not sure if it has any open documentation
[13:00:12] <linuxcnc-build> build #346 of 4022.deb-jessie-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4022.deb-jessie-amd64/builds/346 blamelist: dummy, andypugh <andy@bodgesoc.org>, chris morley <chrisinnanaimo@hotmail.com>, Jeff Epler <jepler@unpythonic.net>, Chris Morley <chrisinnanaimo@hotmail.com>, John
[13:00:13] <linuxcnc-build> Thornton <bjt128@gmail.com>
[13:00:24] <linuxcnc-build> build #290 of 4019.deb-jessie-rtpreempt-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4019.deb-jessie-rtpreempt-i386/builds/290 blamelist: dummy, andypugh <andy@bodgesoc.org>, chris morley <chrisinnanaimo@hotmail.com>, Jeff Epler <jepler@unpythonic.net>, Chris Morley
[13:00:24] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, John Thornton <bjt128@gmail.com>
[13:04:08] <linuxcnc-build> build #290 of 4020.deb-jessie-rtpreempt-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4020.deb-jessie-rtpreempt-amd64/builds/290 blamelist: dummy, andypugh <andy@bodgesoc.org>, chris morley <chrisinnanaimo@hotmail.com>, Jeff Epler <jepler@unpythonic.net>, Chris Morley
[13:04:09] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, John Thornton <bjt128@gmail.com>
[13:05:35] <linuxcnc-build> build #347 of 4021.deb-jessie-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4021.deb-jessie-i386/builds/347 blamelist: dummy, andypugh <andy@bodgesoc.org>, chris morley <chrisinnanaimo@hotmail.com>, Jeff Epler <jepler@unpythonic.net>, Chris Morley <chrisinnanaimo@hotmail.com>, John
[13:05:35] <linuxcnc-build> Thornton <bjt128@gmail.com>
[13:11:48] <linuxcnc-build> build #29 of 4023.deb-jessie-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4023.deb-jessie-rtai-i386/builds/29 blamelist: dummy, andypugh <andy@bodgesoc.org>, chris morley <chrisinnanaimo@hotmail.com>, Jeff Epler <jepler@unpythonic.net>, Chris Morley <chrisinnanaimo@hotmail.com>,
[13:11:48] <linuxcnc-build> John Thornton <bjt128@gmail.com>
[13:25:27] <seb_kuzminsky> archivist: yes, the differential comp is for the wrist on that machine
[13:25:49] <seb_kuzminsky> i want to post a video of it homing the wrist, it's really neat
[13:26:11] <seb_kuzminsky> and world-mode wheel jogging
[13:26:23] <seb_kuzminsky> skunkworks: yeah, it's on ja
[13:27:11] <seb_kuzminsky> that's how i discovered those ja axis bugs earlier this week - i rebased my robot arm branch to the tip of ja, to pick up the awesome wheel jogging stuff dgarr did
[14:53:45] <skunkworks> seb_kuzminsky, awesome - can't wait for a video.
[16:59:01] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes10 1400eb8 06linuxcnc 10src/emc/nml_intf/emc.cc 10src/emc/nml_intf/emc_nml.hh nml was:EMC_AXIS_CMD_MSG is:EMC_JOG_CMD_MSG * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1400eb8
[16:59:01] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes10 c908de4 06linuxcnc 10src/emc/nml_intf/emc.hh emc.hh remove gap and removed comment text * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c908de4
[16:59:01] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes10 4f5060c 06linuxcnc 10src/emc/nml_intf/emc_nml.hh emc_nml.hh annotate j/a jog settings * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4f5060c
[16:59:03] <KGB-linuxcnc> 03Dewey Garrett 05joints_axes10 4734a12 06linuxcnc 10docs/src/code/nml-messages.txt nml-messages.txt update to reflect emc.hh * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4734a12
[19:02:56] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace ed667b3 06linuxcnc 10(10 files in 2 dirs) tests: rename "comp" test to "halcompile/names" for clarity * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ed667b3
[19:02:56] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 2e76862 06linuxcnc 10(8 files in 2 dirs) tests: rename "comp-extralib" test to "halcompile/extralib" for clarity * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2e76862
[19:02:56] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace a331232 06linuxcnc 10(6 files in 2 dirs) tests: rename "usercomp.0" test to "halcompile/userspace" for clarity * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a331232
[19:02:59] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace ef306d9 06linuxcnc 10tests/halcompile/userspace/test.sh tests: fix new deeper path in halcompile/userspace * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ef306d9
[19:03:02] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 4390ffc 06linuxcnc 10(10 files) tests: verify "count=" and "names=" load-time args to userspace components * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4390ffc
[19:03:07] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 72a85fc 06linuxcnc 10src/hal/utils/halcompile.g halcompile: support "count=" and "names=" load-time arguments in userspace components * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=72a85fc
[19:27:50] <linuxcnc-build> build #3062 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/3062 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[19:29:10] <linuxcnc-build> build #118 of 1505.rip-jessie-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1505.rip-jessie-rtai-i386/builds/118 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[19:37:31] <linuxcnc-build> build #1677 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1677 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[19:51:53] <linuxcnc-build> build #3865 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3865 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[21:57:32] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace f2c7830 06linuxcnc 10tests/halcompile/userspace-count-names/count=3.expected 10tests/halcompile/userspace-count-names/names.expected 10tests/halcompile/userspace-count-names/no-args.expected 10tests/halcompile/userspace-count-names/test.sh fixup halcompile count/name test * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f2c7830
[22:01:44] <jepler> seb_kuzminsky: so halcompile will arrange for count= and names= to be parsed from anywhere in argv, but will leave argc/argv unchanged?
[22:01:56] <jepler> that change
http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=commitdiff;h=72a85fc is less bad than I expected
[22:01:59] <jepler> 'night
[22:02:25] <jepler> maybe the test should "list pin" instead of "show pin"
[22:02:31] <jepler> halcmd: list pin
[22:02:32] <jepler> abs.0.in abs.0.is-negative abs.0.is-positive abs.0.out abs.0.sign abs.0.time
[22:02:35] <jepler> double 'night
[22:26:26] <seb_kuzminsky> jepler: you're right, "list pin" is much better than my "show pin" + sed
[22:26:30] * seb_kuzminsky hacks
[22:27:08] <seb_kuzminsky> oh, and i had intended to remove the count= and names= arguments from argc/argv, but i forgot
[22:30:46] <seb_kuzminsky> that's why i passed argc as a pointer instead of int
[22:31:35] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 0a533de 06linuxcnc 10(7 files) tests: use "list pin" instead of "show pin" in halcompile userspace test * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=0a533de
[22:59:37] <KGB-linuxcnc> 03chris morley 05master 9fad493 06linuxcnc 10lib/python/gladevcp/hal_lightbutton.py gladevcp -add option to make buttons momentary * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=9fad493
[22:59:37] <KGB-linuxcnc> 03chris morley 05master d8201df 06linuxcnc 10lib/python/gladevcp/hal_bar.py gladevcp: -if the limits are bilateral change color bilaterally * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d8201df
[22:59:38] <KGB-linuxcnc> 03chris morley 05master 2325384 06linuxcnc 03src/hal/components/sim_matrix_kb.comp component: sim_matrix_kb: converts HAL pin logic to keycodes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2325384
[22:59:40] <KGB-linuxcnc> 03Chris Morley 05master 957e7f8 06linuxcnc 10(14 files in 4 dirs) component: panelui -add keyscan to ui command decoder * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=957e7f8
[22:59:44] <KGB-linuxcnc> 03chris morley 05master 6bb91e3 06linuxcnc 10(5 files in 2 dirs) docs: add some official docs for panelui * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=6bb91e3
[22:59:47] <KGB-linuxcnc> 03chris morley 05master 7715856 06linuxcnc 10(10 files) sim config: add a sample sim config for panelui * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7715856
[23:10:07] <KGB-linuxcnc> 05panelui e6ddd1b 06linuxcnc 04. branch deleted * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e6ddd1b
[23:54:13] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 236af5f 06linuxcnc 10src/hal/utils/halcompile.g halcompile: remove count= and names= from argv, if found * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=236af5f
[23:54:13] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 9fe4a48 06linuxcnc 10src/hal/utils/halcompile.g halcompile: print error msg if both count= and names= is provided * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=9fe4a48
[23:54:14] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace ab995ba 06linuxcnc 10tests/halcompile/userspace-count-names/count=3.expected 10tests/halcompile/userspace-count-names/names.expected 10tests/halcompile/userspace-count-names/no-args.expected 10tests/halcompile/userspace-count-names/userspace_count_names.comp tests/userspace comp: print internal state at startup * 14http://git.linuxcnc.org/
[23:54:18] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace 6d1c808 06linuxcnc 03tests/halcompile/userspace-count-names/count-and-extra-args.expected 03tests/halcompile/userspace-count-names/count-and-extra-args.hal 03tests/halcompile/userspace-count-names/names-and-extra-args.expected 03tests/halcompile/userspace-count-names/names-and-extra-args.hal tests/halcompile: verify removal of count= and na
[23:54:24] <KGB-linuxcnc> 03Sebastian Kuzminsky 05seb/master/halcompile-userspace b1e9c75 06linuxcnc 03tests/halcompile/userspace-count-names/both.expected 03tests/halcompile/userspace-count-names/both.hal tests/halcompile: fail to load if both count= and names= are given * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b1e9c75
