Back
[00:43:42] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-4.1 e5a4172 06linuxcnc 10src/Makefile.inc.in 10src/configure.in RTNAME is not used anywhere * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e5a4172
[00:43:42] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-4.1 ed7603e 06linuxcnc 10src/Makefile 10src/Makefile.modinc.in build system: all versions of RTAI need -msse for math * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ed7603e
[00:43:42] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-4.1 e8a161a 06linuxcnc 10scripts/rtapi.conf.in 10src/configure.in 10src/rtapi/rtai_rtapi.c teach build system & rtapi about RTAI 5 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e8a161a
[00:44:48] <seb_kuzminsky> linuxcnc master with RTAI Vulcano (5.0 prerelease from rtai.org) passes mosts tests now
[00:45:05] <seb_kuzminsky> err, linuxcnc "rtai-4.1" branch, not master, durr
[00:45:28] <seb_kuzminsky> sporadic startup failures related to shm that i'll need to track down
[02:16:33] <linuxcnc-build> build #3648 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/3648 blamelist: Dewey Garrett <dgarrett@panix.com>
[02:18:13] <linuxcnc-build> build #3648 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/3648 blamelist: Dewey Garrett <dgarrett@panix.com>
[02:31:57] <linuxcnc-build> build #3651 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/3651 blamelist: Dewey Garrett <dgarrett@panix.com>
[02:32:32] <linuxcnc-build> build #1839 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1839 blamelist: Dewey Garrett <dgarrett@panix.com>
[02:38:40] <linuxcnc-build> build #3649 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/3649 blamelist: Dewey Garrett <dgarrett@panix.com>
[02:39:49] <linuxcnc-build> build #3647 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/3647 blamelist: Dewey Garrett <dgarrett@panix.com>
[02:46:18] <linuxcnc-build> build #2856 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2856 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:22:31] <linuxcnc-build> build #1318 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/1318 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:23:38] <linuxcnc-build> build #1808 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/1808 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:24:20] <linuxcnc-build> build #1807 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/1807 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:25:20] <linuxcnc-build> build #1999 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/1999 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:38:41] <linuxcnc-build> build #1473 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1473 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:43:28] <linuxcnc-build> build #275 of 1502.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1502.rip-jessie-amd64/builds/275 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:43:44] <linuxcnc-build> build #275 of 1503.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1503.rip-jessie-rtpreempt-amd64/builds/275 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:45:24] <linuxcnc-build> build #275 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/275 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:46:13] <linuxcnc-build> build #275 of 1501.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1501.rip-jessie-rtpreempt-i386/builds/275 blamelist: Dewey Garrett <dgarrett@panix.com>
[03:46:14] <linuxcnc-build> build #3661 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3661 blamelist: Dewey Garrett <dgarrett@panix.com>
[04:11:53] <linuxcnc-build> build #1840 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1840 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[04:15:00] <linuxcnc-build> build #3662 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3662 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[07:08:26] <jepler> > *** glibc detected *** pdflatex: double free or corruption (out): 0x400b8000 ***
[07:08:36] <jepler> well that's an interesting way for the build to fail
[07:26:07] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 5a35cf1 06linuxcnc 10src/Makefile compile: make implicit function declarations into errors * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=5a35cf1
[07:26:07] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex f980bdd 06linuxcnc 10docs/man/man3/rtapi_mutex.3rtapi docs: fix formatting in rtapi_mutex page * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f980bdd
[07:26:08] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex b144cfb 06linuxcnc 10(17 files in 5 dirs) rtapi: split mutex to new header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b144cfb
[07:26:09] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 288e4ac 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi rtapi_atomic: markup fixes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=288e4ac
[07:26:13] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex e5b5d72 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi rtapi_atomic: document implementation limitations * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e5b5d72
[07:26:17] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex cd421d0 06linuxcnc 10src/rtapi/rtapi_atomic.h rtapi_atomic: Must include <atomic> for C++ * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=cd421d0
[07:26:21] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 58121cc 06linuxcnc 10src/hal/hal_priv.h 10src/rtapi/rtapi_mutex.h 10src/rtapi/uspace_common.h rtapi: introduce, use new rtapi_mutex_t type * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=58121cc
[07:26:27] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 1bd1d81 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi 10src/rtapi/rtapi_atomic.h 10src/rtapi/rtapi_mutex.h rtapi_atomic: implement test_and_set and clear * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1bd1d81
[07:26:31] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex c27424c 06linuxcnc 10src/Makefile 04src/rtapi/rtapi_bitops.h 10src/rtapi/rtapi_common.h rtapi: get rid of rtapi_bitops.h header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c27424c
[07:26:36] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 1b83ee7 06linuxcnc 10src/Makefile rtapi: remove rtapi_common.h from public interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1b83ee7
[07:28:35] <linuxcnc-build> build #3649 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/3649 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:28:48] <linuxcnc-build> build #1809 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/1809 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:28:51] <linuxcnc-build> build #3651 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/3651 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:28:56] <linuxcnc-build> build #1810 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/1810 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:28:58] <linuxcnc-build> build #1475 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1475 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:28:58] <linuxcnc-build> build #1320 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/1320 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:29:00] <linuxcnc-build> build #2001 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/2001 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:29:01] <linuxcnc-build> build #2858 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2858 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:29:20] <linuxcnc-build> build #803 of 1903.clang-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1903.clang-wheezy-amd64/builds/803 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:30:35] <linuxcnc-build> build #803 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/803 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:32:41] <linuxcnc-build> build #1841 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1841 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:36:06] <jepler> yay I broke EVERYTHING
[07:48:40] <linuxcnc-build> build #277 of 1502.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1502.rip-jessie-amd64/builds/277 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:49:03] <linuxcnc-build> build #277 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/277 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:49:08] <linuxcnc-build> build #277 of 1503.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1503.rip-jessie-rtpreempt-amd64/builds/277 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:49:38] <linuxcnc-build> build #277 of 1501.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1501.rip-jessie-rtpreempt-i386/builds/277 blamelist: Jeff Epler <jepler@unpythonic.net>
[07:49:38] <linuxcnc-build> build #3663 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3663 blamelist: Jeff Epler <jepler@unpythonic.net>
[08:41:06] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex ad18bdb 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi 10src/rtapi/rtapi_atomic.h 10src/rtapi/rtapi_mutex.h rtapi_atomic: implement test_and_set and clear * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ad18bdb
[08:41:06] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex c6a58cb 06linuxcnc 10src/Makefile 04src/rtapi/rtapi_bitops.h 10src/rtapi/rtapi_common.h rtapi: get rid of rtapi_bitops.h header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c6a58cb
[08:41:06] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 1246933 06linuxcnc 10src/Makefile rtapi: remove rtapi_common.h from public interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1246933
[08:43:11] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/ja9_updates 1a7b64a 06linuxcnc 10tests/halui/jogging/postgui.hal tests/halui/jogging: fix pin name for joints_axes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=1a7b64a
[08:43:54] <linuxcnc-build> build #1476 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1476 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[08:44:14] <linuxcnc-build> build #2859 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2859 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[08:45:33] <linuxcnc-build> build #804 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/804 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[08:52:52] <linuxcnc-build> build #1842 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1842 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[09:07:12] <linuxcnc-build> build #278 of 1502.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1502.rip-jessie-amd64/builds/278 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[09:07:27] <linuxcnc-build> build #278 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/278 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[09:07:31] <linuxcnc-build> build #278 of 1503.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1503.rip-jessie-rtpreempt-amd64/builds/278 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[09:08:01] <linuxcnc-build> build #278 of 1501.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1501.rip-jessie-rtpreempt-i386/builds/278 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[09:08:01] <linuxcnc-build> build #3664 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3664 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[09:16:11] <jepler> cradek:
http://buildbot.linuxcnc.org/doc/master/
[09:16:32] <jepler> http://buildbot.linuxcnc.org/doc/
[09:17:44] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 834aed7 06linuxcnc 10src/hal/hal_priv.h 10src/rtapi/rtapi_common.h 10src/rtapi/rtapi_mutex.h 10src/rtapi/uspace_common.h rtapi: introduce, use new rtapi_mutex_t type * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=834aed7
[09:17:44] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex e56a0cb 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi 10src/rtapi/rtapi_atomic.h 10src/rtapi/rtapi_mutex.h rtapi_atomic: implement test_and_set and clear * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e56a0cb
[09:17:44] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 4c9fe34 06linuxcnc 10src/Makefile 04src/rtapi/rtapi_bitops.h 10src/rtapi/rtapi_common.h rtapi: get rid of rtapi_bitops.h header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4c9fe34
[09:17:48] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex b5ade8a 06linuxcnc 10src/Makefile rtapi: remove rtapi_common.h from public interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b5ade8a
[09:19:00] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 73261f7 06linuxcnc 10docs/man/man3/rtapi_mutex.3rtapi docs: fix formatting in rtapi_mutex page * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=73261f7
[09:19:00] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 27ede17 06linuxcnc 10(17 files in 5 dirs) rtapi: split mutex to new header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=27ede17
[09:19:00] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 12acd5c 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi rtapi_atomic: markup fixes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=12acd5c
[09:19:02] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex cfaaa5d 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi rtapi_atomic: document implementation limitations * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=cfaaa5d
[09:19:06] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 731288e 06linuxcnc 10src/rtapi/rtapi_atomic.h rtapi_atomic: Must include <atomic> for C++ * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=731288e
[09:19:10] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 7668afd 06linuxcnc 10src/hal/hal_priv.h 10src/rtapi/rtapi_common.h 10src/rtapi/rtapi_mutex.h 10src/rtapi/uspace_common.h rtapi: introduce, use new rtapi_mutex_t type * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7668afd
[09:19:15] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 31bce1c 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi 10src/rtapi/rtapi_atomic.h 10src/rtapi/rtapi_mutex.h rtapi_atomic: implement test_and_set and clear * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=31bce1c
[09:19:19] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 45ee233 06linuxcnc 10src/Makefile 04src/rtapi/rtapi_bitops.h 10src/rtapi/rtapi_common.h rtapi: get rid of rtapi_bitops.h header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=45ee233
[09:19:23] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 4a90d7b 06linuxcnc 10src/Makefile rtapi: remove rtapi_common.h from public interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4a90d7b
[09:36:50] <cradek> I wish gitk had "sign off this commit" and maybe "edit this commit message" (things that you do tediously with rebase) on the right click menu
[09:37:13] <cradek> but maybe people would shoot their feet with them too often
[09:38:37] <KGB-linuxcnc> 03Chris Radek 05cradek/zultron/g52 a7e1608 06linuxcnc 10docs/src/gcode/coordinates.txt don't imply something is wrong with using G92 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a7e1608
[09:38:37] <KGB-linuxcnc> 03John Morris 05cradek/zultron/g52 625ceff 06linuxcnc 10(11 files in 3 dirs) fixup: incorporate Chris Radek's feedback * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=625ceff
[09:38:37] <KGB-linuxcnc> 03Chris Radek 05cradek/zultron/g52 9f4d693 06linuxcnc 10docs/html/gcode.html add G52 to the quickref * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=9f4d693
[09:38:39] <KGB-linuxcnc> 03Chris Radek 05cradek/zultron/g52 a70c99a 06linuxcnc 10docs/src/gcode/coordinates.txt fix typo * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a70c99a
[09:38:43] <KGB-linuxcnc> 03Chris Radek 05cradek/zultron/g52 59cf7d3 06linuxcnc 10docs/src/gcode/g-code.txt mention G52 at the G92 summary, too * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=59cf7d3
[09:43:25] <seb_kuzminsky> cradek: yeah that seems fraught with peril
[09:43:43] <seb_kuzminsky> git gui has a 'amend the previous commit' and a signoff button
[09:44:05] <cradek> yeah, but I can do that one in one step already
[09:44:11] * cradek shrugs
[09:44:17] <cradek> it's nothing
[09:45:05] <cradek> thanks again for having the buildbot build docs. could you put a link to the /doc page on the buildbot front page sometime please?
[09:45:50] <seb_kuzminsky> cradek: there's a link off the dev page,
http://buildbot.linuxcnc.org/dev
[09:45:58] <cradek> I don't want to admit to not being able to figure out that path by myself in public, but ...
[09:46:07] <seb_kuzminsky> the buildbot webspace could probably be better organized
[09:46:27] <cradek> ah ok
[09:46:32] <seb_kuzminsky> it's just two big jumbled hand-written html files at the moment / and /dev
[09:46:33] <cradek> I will remember to look there
[09:46:38] <cradek> thanks, it's fine
[09:46:46] * seb_kuzminsky dodges a bullet
[09:47:26] <seb_kuzminsky> well, off to the bit mines for me, bbl
[09:49:23] * JT-Shop thinks that LinuxMint would be perfect if the developers spent as much time on the OS as they did the fancy screen savers lol
[09:50:05] <linuxcnc-build> build #852 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_1] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/852 blamelist: Dewey Garrett <dgarrett@panix.com>
[09:51:00] <cradek> JT-Shop: I bet they use xscreensaver, which has been actively developed for 20 years
[09:51:59] <JT-Shop> sure enough xscreensaver is in /usr/share
[10:05:38] <linuxcnc-build> build #806 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/806 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[10:43:50] <linuxcnc-build> build #2861 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2861 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[10:45:44] <linuxcnc-build> build #1845 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1845 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:11:06] <cradek> JT-Shop: I was wrong: first release of xscreensaver was 1992.
[11:11:43] <cradek> most recent release, Oct 2015
[11:12:16] <linuxcnc-build> build #1478 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1478 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:18:57] <seb_kuzminsky> when was the first release of emc1?
[11:19:39] <cradek> "release" is a strong word, but maybe it was 94ish?
[11:20:15] <seb_kuzminsky> according to the "Use of Open Source Distribution for a Machine Tool Controller" paper form NIST, it was started in 1992
[11:20:27] <seb_kuzminsky> http://linuxcnc.org/docs/devel/html//getting-started/about-linuxcnc.html#_ancient_history_of_the_linuxcnc_project
[11:20:51] <cradek> ugh, I was reading
http://linuxcnc.org/docs/devel/html/common/emc-history.html
[11:20:54] <cradek> they're ... different
[11:21:31] <seb_kuzminsky> haha i suck
[11:22:18] <seb_kuzminsky> i didn't realize we already had that, when i pulled the "ancient history" bits out of joomla
[11:22:33] <seb_kuzminsky> i'll merge the
[11:22:34] <cradek> wow, there's a picture of matt shaver's bridgeport in that pdf
[11:22:36] <seb_kuzminsky> *them
[11:23:36] <seb_kuzminsky> neat!
[11:23:44] <seb_kuzminsky> it's running... tklinuxcnc?
[11:23:49] <seb_kuzminsky> the blue gui
[11:23:55] <cradek> that is surely xemc
[11:24:30] <seb_kuzminsky> wow, and further doan a screenshot with a Netscape Navigator icon in the toolbar
[11:24:39] <cradek> they call the parts silicon, copper, iron
[11:25:02] <seb_kuzminsky> that screenshot has the GUI window title visible, and it's TkEMC
[11:25:17] <seb_kuzminsky> but maybe it's one of the new ones, not what Matt was running
[11:25:24] <cradek> or I'm wrong
[11:25:29] <cradek> (but I think xemc was also blue)
[11:25:34] <cradek> they look alike from a distance
[11:25:54] <seb_kuzminsky> ah
[11:26:10] <seb_kuzminsky> i guess i never ran either of them...
[11:27:19] <cradek> heh
[11:27:21] <cradek> newbie
[11:29:24] <cradek> '92 was a good year if it spawned EMC and xscreensaver
[11:29:54] <seb_kuzminsky> that was the year i graduated high school
[11:29:59] <cradek> ha, me too
[11:42:34] <linuxcnc-build> build #280 of 1502.rip-jessie-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1502.rip-jessie-amd64/builds/280 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:43:39] <skunkworks> 91..
[11:44:31] <linuxcnc-build> build #280 of 1503.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1503.rip-jessie-rtpreempt-amd64/builds/280 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:44:40] <linuxcnc-build> build #280 of 1501.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1501.rip-jessie-rtpreempt-i386/builds/280 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:45:20] <linuxcnc-build> build #280 of 1500.rip-jessie-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/280 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:45:20] <linuxcnc-build> build #3666 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3666 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[11:54:25] <seb_kuzminsky> skunkworks: wow, you're an old man
[11:55:06] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 2e604ba 06linuxcnc 10docs/src/common/emc-history.txt 10docs/src/getting-started/about-linuxcnc.txt docs: dont have two copies of the project history * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2e604ba
[11:56:32] <skunkworks> :)
[11:59:44] <cradek> https://www.jwz.org/blog/2015/11/fashion-tech-1992/
[11:59:48] <cradek> I love this
[12:07:12] <KGB-linuxcnc> 03Dewey Garrett 05master 78b0099 06linuxcnc 10scripts/sim_pin sim_pin: add plus,minus buttons for integers * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=78b0099
[12:07:13] <KGB-linuxcnc> 03Dewey Garrett 05master 97b9164 06linuxcnc 10tcl/bin/halshow.tcl halshow: tree insert at end to preserve sort * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=97b9164
[12:08:04] <cncbasher> jepler: could i ask for a forum area for Tormach Pathpilot users , i feel this should be specific as thiers some parts that are not Linuxcnc related etc , that unless you know Pathpilot would not be apparent , i'm also happy to moderate it , as i'm actively using it
[12:14:39] <jepler> Does anyone else have an opinion about cncbasher's request?
[12:15:16] <jepler> I am happy to do the administrative thing to add the forum, but in case it is controversial or something I don't want to do it without being able to say I asked.
[12:16:20] <cncbasher> yes indeed
[12:17:04] <cncbasher> Tormacvh are using at the moment a cut down version of linuxcnc to suit their needs of course
[12:17:37] <cncbasher> so in some cases it could become specific , hence my thoughts to keep it all in one place
[12:18:35] <cradek> I want to think about it over lunch, thanks for asking before doing it
[12:20:12] <cncbasher> if it becomes a problem then i'll probably produce a forum specificly for it , but thought i'd ask as it's going to crop up at some stage
[12:21:41] <jepler> about path pilot, has anyone who received the written offer for source code exercised the offer and put the source code online for general inspection?
[12:21:53] <jepler> .. he asked, just before going AFK for lunch as well
[12:22:18] <JT-Shop> pathpilot seems to be as far removed as the beaglebone, so I don't see any problems
[12:22:19] <cncbasher> i#m not aware of it being online
[12:22:31] <cncbasher> but i could do it
[12:23:10] <jepler> cncbasher: I believe someone should do it. I can't, since I haven't received a written offer for the source code..
[12:23:15] <JT-Shop> someone sent it to me but it wants to take over the computer so I didn't try it
[12:23:23] <cradek> cncbasher: do you have a relationship with tormach or a tormach machine?
[12:23:30] <cncbasher> nope
[12:24:07] <cncbasher> i bought the source legitamatly from tormach
[12:24:27] <cncbasher> and i'm using it with some of my clients
[12:24:33] <cradek> cool
[12:25:09] <cncbasher> it's quite a pain to install , and it's quite tied up in knots to the gui
[12:25:35] <cradek> yeah and I understand they invented their own kind of packaging/updates
[12:25:39] <jepler> that doesn't mean it's not useful to put it online for anyone to inspect, which is one of the points of the GPL's requirement to release source code
[12:25:42] <cncbasher> so theirs quite a lot of untangling to do , if you wanted to use it , other than with a 5i25
[12:25:43] <jepler> but really afk this time
[12:25:47] <cradek> bbl
[12:26:39] <cncbasher> i'd say it's up to Tormach to post it online ,
[12:27:27] <cncbasher> but if anyone asks me for it , then they get a tarball back simple
[12:27:58] <cncbasher> in fact i'll post it to my dropbox
[12:31:43] <cncbasher> https://www.dropbox.com/sh/8qolrheq6nrdpa9/AACFYWlt8ZRvMWLA7IldfB93a?dl=0
[12:31:57] <cncbasher> there you go if anyone wants it
[12:36:07] <cncbasher> Tormach will send you a dvd with the source , just for asking , they charge $30 .
[12:37:43] <cncbasher> i was suprised it arrived by carrier , simple stagecoast mail would have done
[12:43:09] <seb_kuzminsky> jepler: i'm not opposed to adding a Pathpilot sub-forum to forum.linuxcnc.org, though i recall that you also asked for donations to help offset the cost of running it (tens of dollars per month, iirc, currently out of your pocket?), maybe extend that request to tormach at the same time?
[12:43:10] <cncbasher> for all just be aware that the version tormach release is 2.6.0 , and runs as a server using redis , it also has quite a bit cut out such as comp files mux4 mux16 for example , so some people will have problems
[12:45:10] <cncbasher> and uses rtai
[12:49:10] <archivist> redis may imply machinekit mods
[12:49:45] <cncbasher> yea i'm currently looking at that too
[12:52:27] <cncbasher> i'm looking at it the other way and replace redis , with the one machinekit is using , or at least just wrapping it it make it easier
[13:32:58] <jepler> seb_kuzminsky: I don't think I've officially asked for donations to offset the cost of the forum.
[13:33:00] <cradek> after eating on it, I think it's a good idea to make the forum area
[13:33:13] <jepler> It will cost $144/year in hosting
[13:33:30] <cradek> I wish all the GUI-specific categories were grouped together, so it could go with the others
[13:33:31] <jepler> I'm not opposed to accepting donations, but I'm not interested enough in doing it to set something up
[13:34:44] <cradek> archivist: I believe tormach forked linuxcnc while redis was copied into our tree but not being used, and it was later removed
[13:36:55] <jepler> I'll create the path pilot area under GUIs and see what it would break to move AXIS under there as well.
[13:59:44] <jepler> do pyvcp and gladevcp go under GUIs?
[13:59:48] <jepler> I mean, logically speaking?
[14:00:25] <cradek> sure
[14:00:25] <jepler> Anyway, I've reworked the forum index so that GUIs is a top-level category, and AXIS, Gmoccapy, and PathPilot are below it.
[14:00:51] <jepler> cncbasher: and I believe I've succeeded in making you a moderator of the new PathPilot area
[14:01:52] <cradek> [nitpick] does everyone today know what the GUI acronym means?
[14:02:15] <jepler> I don't know
[14:02:19] <cradek> I don't either
[14:02:51] <cradek> in the explainer text maybe you could say "User Interfaces" instead of repeating GUIs
[14:03:10] <cradek> I like the new arrangement, thanks
[14:03:45] <jepler> as far as I can tell this doesn't affect permalinks, which reflects good choices on the part of the kunena authors
[14:06:18] <jepler> I notice that the part formerly known as "using linuxcnc" is now all about gcode, so I retitled it accordingly. I can't rename the URL it goes to without breaking stuff though.
[14:06:19] <cradek> yay
[14:06:49] <jepler> wordsmithing of any forum names / descriptions is welcome, but I'll cut it out for now
[14:07:58] <cradek> it looks great
[14:27:20] <jepler> the drag and drop manipulation of the forum order is a bit wonky. I hope I didn't order anything wrong.
[17:58:05] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex f0aff8c 06linuxcnc 10src/rtapi/rtapi_atomic.h rtapi_atomic: Must include <atomic> for C++ * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f0aff8c
[17:58:05] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex b6dd976 06linuxcnc 10src/hal/hal_priv.h 10src/rtapi/rtapi_common.h 10src/rtapi/rtapi_mutex.h 10src/rtapi/uspace_common.h rtapi: introduce, use new rtapi_mutex_t type * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b6dd976
[17:58:06] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 736c03a 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi 10src/rtapi/rtapi_atomic.h 10src/rtapi/rtapi_mutex.h rtapi_atomic: implement test_and_set and clear * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=736c03a
[17:58:08] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex a520158 06linuxcnc 10src/Makefile 04src/rtapi/rtapi_bitops.h 10src/rtapi/rtapi_common.h rtapi: get rid of rtapi_bitops.h header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=a520158
[17:58:13] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex 840d689 06linuxcnc 10src/Makefile rtapi: remove rtapi_common.h from public interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=840d689
[18:02:07] <linuxcnc-build> build #810 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/810 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[18:08:13] <linuxcnc-build> build #2865 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2865 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[18:10:19] <linuxcnc-build> build #1482 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1482 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[18:19:55] <seb_kuzminsky> linuxcnc on rtai 5 is getting close: Runtest: 170 tests run, 169 successful, 1 failed + 0 expected
[18:35:38] <linuxcnc-build> build #3670 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3670 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[19:51:06] <skunkworks> seb_kuzminsky: wow - cool
[19:55:08] <KGB-linuxcnc> 05rtai-4.1 e8a161a 06linuxcnc 04. branch deleted * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e8a161a
[19:55:25] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 d3ee591 06linuxcnc 10debian/configure debian/configure: accept linux the new kernel without complaint * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d3ee591
[19:55:25] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 174d8f0 06linuxcnc 10src/Makefile.inc.in 10src/configure.in 10src/hal/Submakefile handle building under RTAI 4.1 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=174d8f0
[19:55:26] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 48c199e 06linuxcnc 10debian/configure accept the new amd64 rtai kernel without complaint * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=48c199e
[19:55:27] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 43083d0 06linuxcnc 10src/hal/drivers/mesa-hostmot2/ioport.c hm2: fix uninitialized variable warning in ioport * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=43083d0
[19:55:31] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 10fa788 06linuxcnc 10src/rtapi/rtai_rtapi.c rtapi: teach rtai_rtapi about renamed RTAI constant * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=10fa788
[19:55:35] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 e5a4172 06linuxcnc 10src/Makefile.inc.in 10src/configure.in RTNAME is not used anywhere * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e5a4172
[19:55:39] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 ed7603e 06linuxcnc 10src/Makefile 10src/Makefile.modinc.in build system: all versions of RTAI need -msse for math * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ed7603e
[19:55:43] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 e8a161a 06linuxcnc 10scripts/rtapi.conf.in 10src/configure.in 10src/rtapi/rtai_rtapi.c teach build system & rtapi about RTAI 5 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e8a161a
[19:55:47] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 7026610 06linuxcnc 10src/rtapi/rtai_ulapi.c rtapi: error messages are better than errno numbers * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=7026610
[19:55:51] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 441b9f6 06linuxcnc 10src/hal/hal_lib.c hal: don't segfault if rtapi_init() fails * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=441b9f6
[19:55:55] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 b1fbd40 06linuxcnc 10scripts/realtime.in realtime script: when loading, wait for udev to finish * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=b1fbd40
[19:55:59] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 fe039c2 06linuxcnc 10tests/symbols.0/test_define.comp 10tests/symbols.0/test_use.comp tests: fix a compiler warning that fails this test on Jessie * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fe039c2
[20:03:44] <seb_kuzminsky> that final commit fixes the last failing test, rtai 5 ("Vulcano" CVS) on Linux 3.16.7 and Jessie now passes
[20:04:14] <seb_kuzminsky> i dont know how the latency compares to our linux-3.4/rtai-3.9 kernel on wheezy
[20:04:22] <seb_kuzminsky> or how stability on real hardware is...
[20:11:58] <linuxcnc-build> build #2866 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2866 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:16:52] <linuxcnc-build> build #1483 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1483 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:18:38] <seb_kuzminsky> well...
[20:20:11] <KGB-linuxcnc> 03Sebastian Kuzminsky 05rtai-5 fbb72cf 06linuxcnc 10scripts/realtime.in realtime script: only try to run udevadm if it exists * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fbb72cf
[20:23:42] <skunkworks> I can test some random hardware when it is ready
[20:23:53] <skunkworks> I have a lot of random hardware
[20:30:00] <seb_kuzminsky> sweet
[20:30:02] <seb_kuzminsky> i think it's ready
[20:30:19] <seb_kuzminsky> kernel & rtai-modules here: deb
http://highlab.com/~seb/linuxcnc jessie main
[20:30:32] <seb_kuzminsky> build the rtai-5 branch
[20:32:38] <linuxcnc-build> build #3671 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3671 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:38:22] <seb_kuzminsky> only i386 (686-pae) for now, but i plan to add amd64 before i get distracted by something shiny
[20:48:51] <linuxcnc-build> build #2867 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2867 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[20:54:08] <linuxcnc-build> build #1484 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1484 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[21:02:17] <cradek> seb_kuzminsky: I don't think [ -x searches the path
[21:03:12] <skunkworks> machinekit folks noticed the world mode wheel jogging...
[21:06:21] <cradek> yay!
[21:08:44] <linuxcnc-build> build #3672 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3672 blamelist: Sebastian Kuzminsky <seb@highlab.com>
[21:30:58] <jepler> seb_kuzminsky: that's great news
[21:32:12] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 470adc4 06linuxcnc 10src/Makefile rtapi: remove rtapi_common.h from public interface * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=470adc4
[21:32:13] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 29c09f4 06linuxcnc 10docs/man/man3/rtapi_mutex.3rtapi docs: fix formatting in rtapi_mutex page * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=29c09f4
[21:32:13] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 f4262e4 06linuxcnc 10(17 files in 5 dirs) rtapi: split mutex to new header * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f4262e4
[21:32:14] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 59fb290 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi rtapi_atomic: markup fixes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=59fb290
[21:32:18] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 84874eb 06linuxcnc 10docs/man/man3/rtapi_atomic.3rtapi rtapi_atomic: document implementation limitations * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=84874eb
[21:32:22] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 14b43a5 06linuxcnc 10src/rtapi/rtapi_atomic.h rtapi_atomic: Must include <atomic> for C++ * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=14b43a5
[21:32:26] <KGB-linuxcnc> 03Jeff Epler 05jepler/atomic-mutex-pt1 99fc07b 06linuxcnc 10src/hal/hal_priv.h 10src/rtapi/rtapi_common.h 10src/rtapi/rtapi_mutex.h 10src/rtapi/uspace_common.h rtapi: introduce, use new rtapi_mutex_t type * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=99fc07b
[21:33:17] <cradek> you guys are wizards
[21:33:27] <jepler> I haven't gotten my code right in like twelve tries
[21:33:46] <jepler> and also I'm too dumb to go turn on the machine with rtai so I can test compile locally instead of waiting 2 hours for buildbot
[21:33:51] <jepler> I'm no wizard
[21:34:10] <jepler> (but .. that machine is downstairs and I'm upstairs)
[21:40:09] <cradek> hmm
[21:40:15] <cradek> some of you may or may not be wizards
[21:54:06] <jepler> seb_kuzminsky: please see the mailing list for some review notes
[21:56:45] <Tom_itx> wizzards in denial
[21:57:34] <seb_kuzminsky> jepler: thanks
[21:57:43] <seb_kuzminsky> yeah there's definitely some squashing & cleanup needed
[21:57:48] <seb_kuzminsky> that's not really a merge candidate
[21:58:30] <jepler> I am glad there was not much to do in linuxcnc
[21:58:47] <jepler> oh I should have said something else about -msse:
[21:58:52] <seb_kuzminsky> yeah i was pleasantly surprised
[21:58:59] <jepler> it should come from rtai's bleeping cflags
[22:37:48] <KGB-linuxcnc> 03Fernand Veilleux 05features_preview 4a1dc8a 06linuxcnc 030001-Add-a-french-translation-of-README.patch 10src/Makefile Merge branch 'master' into features_preview * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=4a1dc8a
[22:39:07] <linuxcnc-build> build #814 of 1903.clang-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1903.clang-wheezy-amd64/builds/814 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[22:39:07] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[22:39:13] <linuxcnc-build> build #814 of 1902.clang-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1902.clang-wheezy-rtai-i386/builds/814 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[22:39:13] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[22:39:50] <linuxcnc-build> build #3660 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/3660 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[22:39:51] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[22:41:01] <linuxcnc-build> build #3662 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/3662 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[22:41:01] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[22:44:13] <linuxcnc-build> build #1853 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1853 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[22:44:13] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[22:46:33] <linuxcnc-build> build #2869 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2869 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[22:46:33] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[22:53:13] <KGB-linuxcnc> 03Robert Ellenberg 05feature/uvw-blending-dev 7afb637 06linuxcnc New branch with 59 commits pushed, 1031 files changed, 032430(+), 04576(-) since feature/uvw-blending-dev/d0ae837
[23:07:18] <seb_kuzminsky> yay!
[23:31:15] <linuxcnc-build> build #1331 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/1331 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris
[23:31:15] <linuxcnc-build> Radek <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett
[23:31:15] <linuxcnc-build> <dgarrett@panix.com>
[23:33:35] <linuxcnc-build> build #1821 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/1821 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[23:33:36] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[23:34:43] <linuxcnc-build> build #1820 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/1820 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[23:34:44] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[23:37:50] <linuxcnc-build> build #2012 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/2012 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>,
[23:37:50] <linuxcnc-build> Chris Radek <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett
[23:37:50] <linuxcnc-build> <dgarrett@panix.com>
[23:41:05] <seb_kuzminsky> poor fernand
[23:45:11] <linuxcnc-build> build #1486 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/1486 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[23:45:11] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[23:50:38] <linuxcnc-build> build #288 of 1500.rip-jessie-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1500.rip-jessie-i386/builds/288 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[23:50:38] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[23:50:43] <linuxcnc-build> build #288 of 1503.rip-jessie-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1503.rip-jessie-rtpreempt-amd64/builds/288 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris
[23:50:43] <linuxcnc-build> Radek <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett
[23:50:43] <linuxcnc-build> <dgarrett@panix.com>
[23:52:10] <linuxcnc-build> build #288 of 1502.rip-jessie-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1502.rip-jessie-amd64/builds/288 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek
[23:52:10] <linuxcnc-build> <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[23:52:57] <linuxcnc-build> build #288 of 1501.rip-jessie-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1501.rip-jessie-rtpreempt-i386/builds/288 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris
[23:52:57] <linuxcnc-build> Radek <chris@timeguy.com>, Chris Morley <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett
[23:52:57] <linuxcnc-build> <dgarrett@panix.com>
[23:52:57] <linuxcnc-build> build #3674 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3674 blamelist: Fernand Veilleux <fernveilleux@gmail.com>, John Morris <john@zultron.com>, andypugh <andy@bodgesoc.org>, Norbert Schechner <nieson@web.de>, Chris Radek <chris@timeguy.com>, Chris Morley
[23:52:57] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, andy pugh <andy@bodgesoc.org>, Jeff Epler <jepler@unpythonic.net>, Moses McKnight <moses@texband.net>, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <bjt128@gmail.com>, chris morley <chrisinnanaimo@hotmail.com>, Robert W. Ellenberg <rwe24g@gmail.com>, Dewey Garrett <dgarrett@panix.com>
[23:54:30] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 fc6e7f7 06linuxcnc 10src/rtapi/rtai_ulapi.c rtapi: error messages are better than errno numbers * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fc6e7f7
[23:54:30] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 c3a39c0 06linuxcnc 10src/hal/hal_lib.c hal: don't segfault if rtapi_init() fails * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c3a39c0
[23:55:27] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 29dbefd 06linuxcnc 10src/hal/hal_lib.c 10src/rtapi/rtai_ulapi.c Merge remote-tracking branch 'origin/2.6' into 2.7 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=29dbefd
[23:56:07] <KGB-linuxcnc> 03Sebastian Kuzminsky 05master 80e58b9 06linuxcnc Merge remote-tracking branch 'origin/2.7' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=80e58b9
[23:57:12] <KGB-linuxcnc> 03Fernand Veilleux 05features_preview_2 56385dc 06linuxcnc 03share/features/README_FR Add a french version of README * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=56385dc