Back
[08:21:46] <quitte_> Hi. Is the live build configuration for the 2.6 image available somewhere?
[08:57:17] <cradek> the wheezy image? it's on git.timeguy.com
[11:09:10] <quitte_> cradek: thanks. that seems to be exactly it
[12:14:55] <tinkerer> cradek:did you get the mails
[14:36:07] <andypugh> Just reading the HAL intro docs. Is this actually true? “float - a 64 bit floating point value, with approximately 53 bits of resolution and over 1000 bits of dynamic range.”
[14:37:04] <andypugh> I can see it might be, but I am not sure how you quantify dynamic range in bits.
[15:09:09] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 d0bb662 06linuxcnc Merge remote-tracking branch 'origin/v2.5_branch' into 2.6 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d0bb662
[15:15:14] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 0909a91 06linuxcnc 10VERSION 10debian/changelog LinuxCNC 2.6.8 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=0909a91
[15:15:15] <KGB-linuxcnc> 03Sebastian Kuzminsky 05signed tags 05f3bce 06linuxcnc 03v2.6.8 LinuxCNC v2.6.8 (tagged commit: 0909a91) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=05f3bce
[15:16:58] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 594f74c 06linuxcnc 10debian/changelog 10share/axis/tcl/axis.tcl 10src/hal/hal_lib.c Merge remote-tracking branch 'origin/2.6' into 2.7 * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=594f74c
[15:17:47] <KGB-linuxcnc> 03Sebastian Kuzminsky 05master 368f439 06linuxcnc 10debian/changelog Merge remote-tracking branch 'origin/2.7' * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=368f439
[15:22:18] <skunkworks> ooh...
[15:47:51] <quitte_> cradek: it seems live-images can not be cloned: warning: remote HEAD refers to nonexistent ref, unable to checkout.
[15:50:19] <jepler> quitte_: seems after cloning you need to 'git checkout debian'
[15:50:53] <jepler> or clone with this commandline: git clone -b debian git://git.timeguy.com/live-images.git
[15:51:19] <quitte_> thanks.
[16:45:02] <linuxcnc-build> build #939 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/939 blamelist: Dewey Garrett <dgarrett@panix.com>
[16:45:02] <linuxcnc-build> build #3130 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3130 blamelist: Dewey Garrett <dgarrett@panix.com>
[16:46:34] <seb_kuzminsky> err, that's an old one, the buildbot was wedged and i hadn't noticed... :-(
[16:46:38] <seb_kuzminsky> trying to fix that now...
[16:49:05] <linuxcnc-build> build #2324 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed configuring] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2324 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[16:51:17] <seb_kuzminsky> sigh, i wish i'd noticed that the buildbot was sick before pushing the 2.6.8 tag :-/
[17:06:59] <linuxcnc-build> build #1278 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/1278 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:07:14] <linuxcnc-build> build #1278 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/1278 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:08:02] <linuxcnc-build> build #1469 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/1469 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett
[17:08:02] <linuxcnc-build> <dgarrett@panix.com>
[17:09:51] <linuxcnc-build> build #789 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/789 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett
[17:09:51] <linuxcnc-build> <dgarrett@panix.com>
[17:14:57] <linuxcnc-build> build #1308 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/1308 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:16:12] <linuxcnc-build> build #3120 of 1300.rip-precise-i386 is complete: Failure [4failed apt-get-update install-missing-build-dependencies compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/3120 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek
[17:16:12] <linuxcnc-build> <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:17:30] <linuxcnc-build> build #3121 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/3121 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:17:32] <linuxcnc-build> build #3122 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/3122 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:20:08] <linuxcnc-build> build #3121 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/3121 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[17:23:04] <linuxcnc-build> build #3121 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/3121 blamelist: Jeff Epler <jepler@unpythonic.net>, Sebastian Kuzminsky <seb@highlab.com>, Chris Radek <chris@timeguy.com>, Dewey Garrett <dgarrett@panix.com>
[18:06:23] <seb_kuzminsky> linuxcnc-build: force build --branch=2.6 0000.checkin
[18:06:24] <linuxcnc-build> build #3132 forced
[18:06:24] <linuxcnc-build> I'll give a shout when the build finishes
[18:14:06] <linuxcnc-build> build #2325 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/2325
[18:36:19] <linuxcnc-build> build #3121 of 1300.rip-precise-i386 is complete: Failure [4failed apt-get-update install-missing-build-dependencies compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/3121
[18:37:19] <linuxcnc-build> build #3122 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/3122
[18:37:20] <linuxcnc-build> build #3122 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/3122
[18:42:29] <linuxcnc-build> build #3132 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3132
[19:13:00] <seb_kuzminsky> linuxcnc-build: force build --branch=2.6 0000.checkin
[19:13:01] <linuxcnc-build> build #3133 forced
[19:13:01] <linuxcnc-build> I'll give a shout when the build finishes
[19:13:08] <seb_kuzminsky> you better
[19:44:05] <linuxcnc-build> build #3122 of 1300.rip-precise-i386 is complete: Failure [4failed apt-get-update install-missing-build-dependencies compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/3122
[19:48:32] <linuxcnc-build> build #3133 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3133
[21:07:17] <seb_kuzminsky> this is what i get for ignoring the buildbot for 2 weeks
[21:28:39] <skunkworks> that much closer to 2.7.. :) Thanks guys!
[21:32:52] <cradek> ooh a new 2.6?
[21:33:10] <seb_kuzminsky> err wellll.....
[21:33:29] <seb_kuzminsky> http://pastie.org/10181878
[21:33:39] <seb_kuzminsky> other than that everything is fine
[21:33:48] <cradek> ooh ouch
[21:33:59] <cradek> bad hardware?
[21:34:17] <seb_kuzminsky> it's a vm
[21:34:31] <seb_kuzminsky> so i think i'll throw it away and restore from backup!
[21:34:38] * seb_kuzminsky looks for a backup
[21:35:01] <seb_kuzminsky> "i haven't lost my mind, it's backed up on tape somewhere"
[21:35:44] <cradek> oh if only zfs
[21:35:52] <skunkworks> http://www.cnczone.com/forums/benchtop-machines/212088-cnc-3.html#post1700148
[21:35:53] <cradek> I'm so spoiled
[21:36:40] <cradek> > I revamped my GUI for GRBL and got the GRBL cycle time down
[21:36:45] <cradek> I don't even
[21:37:31] <skunkworks> no clue.. I guess I am surprised it works as well as it seems to...
[21:38:31] <skunkworks> it would be interesting to run it through my linuxcnc logger to see if it actually obeys vel and acc constraints..
[21:38:40] <cradek> totally
[21:39:00] <cradek> it'd be extremely easy to beat everyone else's cycle time if that was your one goal :-)
[21:39:18] <skunkworks> well - linuxcnc 2.7 beats it.. ;)
[21:42:09] <seb_kuzminsky> there's a bug in my buildbot config (or in buildbot, the jury is out) that makes it fail to email me when a buildslave goes down
[21:42:50] <seb_kuzminsky> so it's been stalled since april 24, when dgarr heroically tried to get eslavko's streamer patches to work, but instead it panicked one of the buildslaves
[21:43:01] <seb_kuzminsky> and it's been sitting uselessly waiting for it to un-panic
[21:43:30] <seb_kuzminsky> i asked on #buildbot about the problem i'm running into, but haven't gotten a reply yet
[21:44:05] <seb_kuzminsky> http://pastie.org/pastes/10181697/text
[21:44:35] <seb_kuzminsky> the buildbot config talks about a 'status' object, but never a 'statusTarget' like that backtrace is complaining about
[21:44:45] <seb_kuzminsky> my 'status' target works just fine, thankyouverymuch
[21:44:49] <cradek> well that sure looks like a bug
[21:45:00] <cradek> even so, buildbot is worth at least twice what we've paid for it
[21:45:09] <seb_kuzminsky> heh
[21:45:45] <seb_kuzminsky> somewhere on my todo list, down around #400 i think, it says to machine a thank-you tchotchke for the buildbot folks
[21:46:26] <cradek> that would be awesome
[21:46:33] <seb_kuzminsky> maybe a turner's cube that says "linuxcnc <3 buildbot" around the top
[21:47:25] <seb_kuzminsky> i need a printer that can print tuits
[21:47:28] <cradek> hm, in my toolbox I bet I still have the workholding parts I used to make my cube
[21:47:49] <cradek> those cubes are not very fun to make, but they're neat
[21:47:53] <seb_kuzminsky> heh
[21:47:57] <seb_kuzminsky> i never tried to make one yet
[21:48:02] <cradek> I've made only one ever, and somehow my mom claimed it
[21:48:05] <seb_kuzminsky> dont you just hold them in the vise?
[21:48:14] <cradek> you have to hold the inside parts too
[21:48:26] <seb_kuzminsky> eeuughhthbt
[21:48:32] <cradek> haha
[21:48:35] <cradek> aka the hard part
[21:48:57] <skunkworks> kinda like the ball in cube.. when you cut the last side - the ball and cube both need to be held...
[21:49:30] <seb_kuzminsky> but the inside of the turner's cube isn't free, usually, is it?
[21:49:37] <cradek> yes it is
[21:49:47] <seb_kuzminsky> oooooohhh
[21:49:49] <seb_kuzminsky> well fuck
[21:49:51] <cradek> afaik, it's a free but captive cube inside a cube
[21:50:03] <skunkworks> inside a cube..
[21:50:12] <cradek> sure, you could have more levels
[21:50:57] <seb_kuzminsky> ok something screwy's going on
[21:51:12] <seb_kuzminsky> my backup from Dec 9 has the same problem (segfault when i run apt-cache)
[21:51:21] <seb_kuzminsky> maybe its time to reboot the vm host
[21:51:46] <seb_kuzminsky> it's only been up 208 days, but it's in my dusty sweaty garage
[21:55:43] <seb_kuzminsky> bob warfield (who thinks linuxcnc doesn't have half the features it does) made a turners cube where the inside cubes are captured at the corners:
http://www.cnccookbook.com/CCTurnersCube.html
[21:56:25] <seb_kuzminsky> "Sticklers will tell you it isn't truly a Turner's cube unless the interior shapes are free to float"
[21:56:41] <cradek> that's how I made mine, except I cut it all the way
[21:57:42] <cradek> mine's also a really good 1.000 +- maybe .002 cube
[21:58:57] <cradek> having the parts not detach would make it MUCH easier...
[22:00:02] <seb_kuzminsky> ok, triaged the apt-get segfault a bit
[22:00:07] <seb_kuzminsky> it's, ahem, my fault
[22:00:18] <seb_kuzminsky> looks like buggy Package files from the buildbot
[22:00:32] <seb_kuzminsky> possibly related to the streamer panic of Apr 24
[22:00:37] <seb_kuzminsky> (a day that will go down in infamy)
[22:00:47] * seb_kuzminsky rebuilds the Package files
[22:01:07] <cradek> heh bob loves path pilot
[22:01:10] <cradek> sigh
[22:01:26] <skunkworks> what can you do? people are crazy.
[22:03:10] <cradek> http://blogcnccookbookcom.c.presscdn.com/wp-content/uploads/2015/03/TormachCloud.jpg
[22:03:13] <skunkworks> doesn't seem that is much of a challenge then.. (interior shapes not free)
[22:03:22] <cradek> yeah
[22:03:37] <skunkworks> just... wow..
[22:04:40] <seb_kuzminsky> that picture makes me think of the whale and the bowl of petunias
[22:04:50] <skunkworks> heh - not again!
[22:05:26] <skunkworks> I really should get back to reading again.. I find very little time for it.
[22:13:59] <seb_kuzminsky> goodnight moon?
[22:16:13] <seb_kuzminsky> ok, i think the problem on the precise-i386 buildslave was a bug in apt that i've run in to before - too many deb archives in the sources.lists and it crashes
[22:16:25] <seb_kuzminsky> i disabled v2.4_branch and it's fine again
[22:17:01] <seb_kuzminsky> dont tell murphy, but i think we should have 2.6.8 by morning
[22:17:07] <cradek> woohoo
[22:22:58] <seb_kuzminsky> linuxcnc-build: force build --revision=v2.6.8 0000.checkin
[22:22:59] <linuxcnc-build> build #3134 forced
[22:22:59] <linuxcnc-build> I'll give a shout when the build finishes
[22:24:34] <seb_kuzminsky> help me linuxcnc-build, you're my only hope
[22:29:13] <skunkworks> seb_kuzminsky:
https://www.youtube.com/watch?v=eBRYsAfchkY
[23:08:40] <linuxcnc-build> Hey! build 0000.checkin #3134 is complete: Success [3build successful]
[23:08:40] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/3134
