Back
[00:04:38] <linuxcnc-build> build #2766 of 1200.rip-lucid-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/2766 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:11:30] <linuxcnc-build> build #2765 of 1300.rip-precise-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/2765 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:12:57] <linuxcnc-build> build #2767 of 1306.rip-precise-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/2767 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:15:13] <linuxcnc-build> build #1967 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/1967 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:21:36] <linuxcnc-build> build #923 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/923 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:21:59] <linuxcnc-build> build #1114 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/1114 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:23:27] <linuxcnc-build> build #923 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/923 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:23:29] <linuxcnc-build> build #2766 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/2766 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:25:08] <linuxcnc-build> build #434 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/434 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:28:59] <linuxcnc-build> build #2766 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/2766 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:29:27] <linuxcnc-build> build #581 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/581 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:29:27] <linuxcnc-build> build #2777 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2777 blamelist: dummy, Sebastian Kuzminsky <seb@highlab.com>, John Thornton <jthornton@gnipsel.com>, Dewey Garrett <dgarrett@panix.com>
[00:42:49] <memfrob> i havent worked on IPIPE in awhile, im bumping 3.14 support and adding preliminary 3.16 support to RTAI, which will then hopefully turn into 3.18 kernel support
[00:43:14] <memfrob> trying to freshen up my coding skills i havent touch C in months
[00:43:54] <memfrob> RTAI will then be ahead of xenomai and preempt-rt :D
[00:45:25] <memfrob> one of the xenomai devs (phillippe gerum, something like that) fixed the x86 assembly code problems i was running into because 3.16 changed the way entry_*.S works
[00:50:38] <memfrob> question, do those fpga mesa cards that work over ethernet like the hm2 eth driver use real-time threads or is it all standard posix?
[00:51:00] <memfrob> if its standard posix then you dont even need rtai or preempt-rt yes?
[01:46:07] <linuxcnc-build> build #2221 of 4003.deb-lucid-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4003.deb-lucid-i386/builds/2221 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[01:49:07] <linuxcnc-build> build #2226 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/2226 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[01:50:06] <linuxcnc-build> build #2226 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/2226 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[01:53:39] <linuxcnc-build> build #1060 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/1060 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:08:09] <linuxcnc-build> build #2220 of 4004.deb-lucid-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4004.deb-lucid-amd64/builds/2220 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:08:29] <linuxcnc-build> build #2223 of 4006.deb-lucid-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4006.deb-lucid-rtai-i386/builds/2223 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:08:57] <linuxcnc-build> build #791 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/791 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:09:18] <linuxcnc-build> build #790 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/790 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:09:27] <linuxcnc-build> build #315 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/315 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:09:49] <linuxcnc-build> build #276 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/276 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:10:15] <linuxcnc-build> build #493 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/493 blamelist: dummy, Dewey Garrett <dgarrett@panix.com>
[02:56:07] <memfrob> hmm.. latency spikes around 50K on the base thread with kernel 3.14.26 but i also have the kernel code very similar to upstream IPIPE
[03:13:00] <memfrob> jepler i tested your pull request, works fine with latency test and sim, merged it in RTAI
[03:27:33] <memfrob> i sent an email out to the folks at RTAI to figure out why web browers cause so much latency spikes.
[03:28:18] <memfrob> id like to solve that problem before bumping kernels because a new kernel wont do much if using the system causes unstable latency, regardless of kernel version
[03:32:18] <memfrob> ive never seen latency this bad before. ive noticed spikes with browers before with preempt-rt as well, its really strange. anyway, im off to bed now
[08:38:34] <jepler> memfrob: ethernet cards use "standard posix" socket APIs, but they need the realtime guarantees of preempt-rt.
[10:34:57] <cradek> 97 (!!) of our sample configs have EDITOR=gedit, but there's no gedit in xfce by default
[10:35:23] <cradek> I could change 97 entries, or add gedit to the install image, or do a third thing that is hopefully smarter and more flexible
[10:35:32] <cradek> does anyone know what that third thing is?
[10:38:44] <cradek> sensible-editor gives me vim, and if there's not a tty it does nothing?, which is not very sensible
[10:45:00] <seb_kuzminsky> the purist in me says we should not set EDITOR in the linuxcnc ini files, and let the user choose their editor by setting EDITOR in their environment, the way it works for everything else
[10:45:38] <seb_kuzminsky> but i dread the inevitable email threads about how to do that
[10:45:40] <memfrob> You guys are going to just love this. mail.rtai.org/pipermail/rtai/2014-December/026588.html
[10:45:54] <seb_kuzminsky> morning memfrob
[10:46:02] <memfrob> morning seb_kuzminsky its been awhile!
[10:50:06] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 26e8b43 06linuxcnc 10(83 files in 9 dirs) docs: reorg Getting Started (English) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=26e8b43
[10:50:06] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 c80fb87 06linuxcnc 10(78 files in 8 dirs) docs: reorg Getting Started (French) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c80fb87
[10:50:06] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 d2a4d9c 06linuxcnc 10(23 files in 5 dirs) docs: reorg Getting Started (Spanish) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d2a4d9c
[10:50:28] <KGB-linuxcnc> 05seb/2.7/docs-reorg 9740391 06linuxcnc 04. branch deleted * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=9740391
[11:29:01] <Tom_itx> or we could just add it in after the install like JT-Shop and I did
[11:39:25] <jepler> I don't think there is a way to refer to "the user's preferred GUI text editor" in debian 7.
[11:40:31] <jepler> this will work anywhere but give a terminal-based editor: x-terminal-emulator -e sensible-editor
[11:40:44] <Tom_itx> i think most lcnc users are smart enough to figure out how to install an editor
[11:52:06] <pcw_home> I just learned to type mousepad
[11:59:38] <seb_kuzminsky> on wheezy, sensible-editor is a shell script that tries to run the editor named by $VISUAL, then by $EDITOR, then /usr/bin/editor, then nano-tiny, then vi
[12:00:14] <seb_kuzminsky> /usr/bin/editor is an 'alternative' which the sysadmin can make to point to any installed editor
[12:00:33] <seb_kuzminsky> "update-alternatives --list editor" shows what options are installed on a given system
[12:01:05] <seb_kuzminsky> http://pastie.org/9778437
[12:02:11] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/lib_for_halfiles 916fb81 06linuxcnc 10(9 files in 5 dirs) linuxcnc.in: support halfiles in a system lib * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=916fb81
[12:13:09] <memfrob> eselect editor set <X> - the gentoo way :)
[12:14:10] <seb_kuzminsky> 'update-alternatives --set editor gvim' is the debian way
[12:15:06] <memfrob> i didnt even know debian had a default editor selector, i always modified /etc/profile heh
[12:16:28] <seb_kuzminsky> that works too
[12:24:26] <seb_kuzminsky> jepler: i think "the user's preferred GUI editor" is $VISUAL
[12:24:37] <seb_kuzminsky> that may or may not be an abvious name for the thing we're talking about
[12:39:18] <seb_kuzminsky> ah, err, no, it's even sillier than that
[12:39:35] <seb_kuzminsky> VISUAL is the "screen-oriented" editor, as opposed to EDITOR which is the line-oriented editor
[12:39:49] <seb_kuzminsky> 1979 called, they want their environment variables back...
[12:45:04] <pcw_home> Never know when you may need to edit with a TTY
[12:48:14] <archivist> I never want to edit with a tty ever again
[13:48:25] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 c8c13c2 06linuxcnc 10(9 files) docs: split "About LinuxCNC" out from the "Getting LinuxCNC" document * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c8c13c2
[13:48:25] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 3f82f31 06linuxcnc 10(6 files) docs: rename & move the "Running LinuxCNC" section * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=3f82f31
[13:48:25] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 e9a5c3f 06linuxcnc 10docs/src/getting-started/Getting-Started-with-LinuxCNC.contents-fr.txt 10docs/src/getting-started/Getting_linuxcnc_fr.txt 03docs/src/getting-started/Running-LinuxCNC_fr.txt docs: reorg french docs to match english * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e9a5c3f
[13:48:28] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 fd6c562 06linuxcnc 10docs/src/getting-started/Running-LinuxCNC.txt docs: rebrand the "Running LinuxCNC" document * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=fd6c562
[13:48:32] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 499e65a 06linuxcnc 03docs/src/getting-started/Getting-LinuxCNC_es.txt 10docs/src/getting-started/Getting-Started-with-LinuxCNC.contents-es.txt 04docs/src/getting-started/Getting_EMC_es.txt docs: rename the spanish Getting LinuxCNC document (rebrand) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=499e65a
[13:48:38] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 ff670c9 06linuxcnc 03docs/src/getting-started/Getting-LinuxCNC_fr.txt 10docs/src/getting-started/Getting-Started-with-LinuxCNC.contents-fr.txt 04docs/src/getting-started/Getting_linuxcnc_fr.txt docs: rename a french doc to match the english * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ff670c9
[13:48:43] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 55556e7 06linuxcnc 10docs/src/getting-started/Getting-Started-with-LinuxCNC.contents-es.txt 04docs/src/getting-started/Updating_EMC_es.txt 03docs/src/getting-started/Updating_LinuxCNC_es.txt docs: rename a spanish doc (rebrand) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=55556e7
[13:48:48] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 c0f35b3 06linuxcnc 10docs/src/getting-started/Getting-Started-with-LinuxCNC.contents-fr.txt 03docs/src/getting-started/Updating_LinuxCNC_fr.txt 04docs/src/getting-started/Updating_linuxcnc_fr.txt docs: rename a french doc to match the english * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c0f35b3
[13:48:53] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 53b48b8 06linuxcnc 10(8 files) docs: remove superfluous :toc: attribute from french docs * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=53b48b8
[13:48:57] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 75f218e 06linuxcnc 10docs/src/getting-started/stepconf.txt 10docs/src/getting-started/stepconf_es.txt docs: fix some markup problems in English and Spanish "Stepconf" doc * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=75f218e
[13:49:01] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.7 d5f663f 06linuxcnc 10docs/src/getting-started/pncconf.txt 10docs/src/getting-started/pncconf_es.txt docs: fix some markup problems in English and Spanish "pncconf" doc * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=d5f663f
[13:53:24] <memfrob> seb_kuzminsky: LOL! love the 1979 joke. is that why environment variables took off?
[15:45:05] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/hallib 90db5a4 06linuxcnc 10(5 files in 3 dirs) hallib: support halfiles in a system lib dir * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=90db5a4
[15:45:05] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/hallib 129d800 06linuxcnc 10(19 files in 7 dirs) sim/configs:use [HAL]HALFILE=LIB: (2 hallib items) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=129d800
[15:46:17] <dgarr> dgarr/lib_for_halfiles finally tested successfully in deb (branch for test only)
[15:46:27] <dgarr> new: dgarr/hallib -- proposed method (rebased on master)
[15:46:40] <dgarr> new: dgarr/hallib -- proposed method (rebased on master)
[15:46:58] <dgarr> opinions on this approach?
[15:48:14] <linuxcnc-build> build #2568 of 1901.clang-precise-amd64 is complete: Failure [4failed git] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1901.clang-precise-amd64/builds/2568 blamelist: Dewey Garrett <dgarrett@panix.com>
[15:48:22] <linuxcnc-build> build #2772 of 1306.rip-precise-amd64 is complete: Failure [4failed git] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/2772 blamelist: Dewey Garrett <dgarrett@panix.com>
[15:51:44] <dgarr> i'm guessing that is a buildbot local problem? cp: cannot stat `/home/buildslave/emc2-buildbot/precise-amd64/precise-amd64-sim/source/.git/objects/pack/pack-89d0c5faeef4e1ea9f2f13ee2896cae5f212d3d7.pack': No such file or directory
[16:03:36] <seb_kuzminsky> dgarr: did you rebase & force-push that branch? if so the buildbot might have been trying to build an older version that no longer exists
[16:03:45] <seb_kuzminsky> memfrob: :-)
[16:03:58] <seb_kuzminsky> memfrob: i have no idea about the history of environment variables
[16:04:33] <dgarr> seb dgarr/hallib was its first push, the other test branch was force pushed this am
[16:05:22] <seb_kuzminsky> hmm, i see it's commit 129d800c that it couldn't find, that's the head of that branch
[16:05:25] <seb_kuzminsky> strange
[16:06:16] <dgarr> it only seems a problem on 2 branches, some kind of race maybe
[16:06:35] <dgarr> s/2 branches/2 hosts/
[16:08:56] <seb_kuzminsky> the git stuff is sequenced in the buildbot, it shouldnt race about it
[16:10:03] <seb_kuzminsky> it successfully fetched that commit from my local git server
[16:13:38] <seb_kuzminsky> dgarr: here's the problem: Auto packing the repository in background for optimum performance.
[16:14:22] <seb_kuzminsky> that interacted badly with the non-git "cp" of the repo that the buildbot does
[16:14:30] <dgarr> glad you found it.
[16:14:49] <seb_kuzminsky> linuxcnc-build: force build --branch=dgarr/hallib 0000.checkin
[16:14:54] <linuxcnc-build> The build has been queued, I'll give a shout when it starts
[16:15:20] <seb_kuzminsky> dgarr: yep, sorry for the hassle
[16:15:39] <seb_kuzminsky> i should see about moving repo packing to the foreground in the buildbot
[16:16:01] <dgarr> seb_kuzminsky: any comments on the method in these branches for [HAL]HALFILE = LIB:filename ?? i think it could be useful
[16:20:52] <seb_kuzminsky> dgarr: i haven't read the branch in detail yet, but i like the general idea
[16:21:21] <seb_kuzminsky> i need to go help my parents take care of some stuff around their house, i'll try to give you better feedback tonight
[16:23:41] <dgarr> it s useful for the two items implemented but could be extend to address the Makefile configs: (COPY_CONFIGS) and simplify the config tree (a lot) i would need some positive feedback to work on that
[16:24:47] <dgarr> cradek: jepler others, comments on above welcom dgarr/hallib branch
[16:25:41] <dgarr> ^^
[16:35:57] <linuxcnc-build> build #2782 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2782 blamelist: Dewey Garrett <dgarrett@panix.com>
[16:35:57] <linuxcnc-build> build forced [ETA 1h16m23s]
[16:35:57] <linuxcnc-build> I'll give a shout when the build finishes
[17:28:54] <linuxcnc-build> Hey! build 0000.checkin #2783 is complete: Success [3build successful]
[17:28:54] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2783
[17:44:46] <pcw_home> skunkworks:
[17:44:48] <pcw_home> http://imagebin.ca/v/1kXpF29yI3w9
[17:44:50] <pcw_home> decent stepgen performance over Ethernet at high speeds/accel
[17:48:35] <pcw_home> position jitter at 100 ips slew ~= to a sampling time jitter of 50 ns
[17:48:41] <linuxcnc-build> build #2225 of 4003.deb-lucid-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4003.deb-lucid-i386/builds/2225
[17:58:43] <linuxcnc-build> build #2230 of 4007.deb-precise-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/builds/2230
[17:59:37] <linuxcnc-build> build #1064 of 4009.deb-precise-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4009.deb-precise-rtai-i386/builds/1064
[17:59:44] <linuxcnc-build> build #2230 of 4008.deb-precise-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4008.deb-precise-amd64/builds/2230
[18:07:25] <linuxcnc-build> build #795 of 4017.deb-wheezy-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4017.deb-wheezy-amd64/builds/795
[18:08:33] <linuxcnc-build> build #794 of 4016.deb-wheezy-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4016.deb-wheezy-i386/builds/794
[18:12:07] <linuxcnc-build> build #319 of 4015.deb-wheezy-rtpreempt-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4015.deb-wheezy-rtpreempt-amd64/builds/319
[18:12:43] <linuxcnc-build> build #280 of 4014.deb-wheezy-rtpreempt-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4014.deb-wheezy-rtpreempt-i386/builds/280
[18:14:15] <linuxcnc-build> build #2224 of 4004.deb-lucid-amd64 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4004.deb-lucid-amd64/builds/2224
[18:14:53] <linuxcnc-build> build #497 of 4018.deb-wheezy-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4018.deb-wheezy-rtai-i386/builds/497
[18:15:41] <linuxcnc-build> build #2227 of 4006.deb-lucid-rtai-i386 is complete: Failure [4failed shell_3] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/4006.deb-lucid-rtai-i386/builds/2227
[18:21:32] <dgarr> so the way i did the Makefile , lib/hallib/ must have one of each type of halfiles
[18:26:23] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/hallib 8e4ef04 06linuxcnc 10(22 files in 7 dirs) sim/configs:use [HAL]HALFILE=LIB: (2 hallib items) * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=8e4ef04
[18:26:24] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/hallib e34e9c8 06linuxcnc 10docs/src/config/ini_config.txt ini_config.txt: update for [HAL]HALFILE=LIB:name * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=e34e9c8