#linuxcnc-devel | Logs for 2014-11-29

[00:13:54] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/moveoff 2ee96db 06linuxcnc 10scripts/moveoff_gui 10src/hal/components/moveoff.comp moveoff.comp update man page, moveoff_gui Usage: * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=2ee96db
[01:04:06] <zeeshan> http://i.imgur.com/jgJ3EZc.png
[01:04:07] <zeeshan> success :D
[07:31:10] <KGB-linuxcnc> 03Dewey Garrett 05dgarr/moveoff ef18dbc 06linuxcnc 10scripts/moveoff_gui moveoff_gui: add button to zero entry boxes * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=ef18dbc
[17:29:39] <Tom_itx> skunkworks have you run 2.7 on hardware yet?
[17:30:01] <Tom_itx> i know you do alot of testing...
[19:24:08] <skunkworks> Tom_itx: yes - On the K&T for testing
[19:24:36] <skunkworks> You could hear the difference. (jeff and chris where over at the time)
[19:25:18] <skunkworks> you can hear the higher acceleration during contouring moves.
[20:10:28] <Tom_itx> oh that cool
[20:10:53] <Tom_itx> you say it falls back if you use more than X Y Z though?
[20:11:09] <Tom_itx> did you have to retune anything for it?
[20:39:54] <cradek> huh, if you just lie about the cutter diameter, you can make cutter comp figure out corner fillet arcs for you
[21:16:13] <skunkworks> Tom_itx: I don't think so..
[21:16:43] <skunkworks> cradek: what ya making?
[21:17:40] <skunkworks> Tom_itx: if the machine is tuned for exact stop mode acceleration (full) - it should work just fine with the new tp.
[21:17:51] <Tom_itx> what were those settings added for the TP in the ini?
[21:18:03] <Tom_itx> i did an hdd change and lost some notes on that
[21:18:22] <skunkworks> Tom_itx: if you are running linuxcnc 2.7 it is on by default with sane setings.
[21:18:47] <Tom_itx> no change needed then ehh?
[21:19:14] <Tom_itx> i may have it on the ssd still...
[21:21:07] <skunkworks> Tom_itx: https://www.mail-archive.com/emc-users@lists.sourceforge.net/msg51660.html
[21:23:19] <Tom_itx> thanks
[22:54:47] <Tom_itx> where's the 2.7 source located?
[22:55:01] <Tom_itx> is that considered 'master'?
[23:21:51] <pcw_home> master is 2.8.something
[23:22:11] <Tom_itx> did they move it?
[23:22:21] <Tom_itx> my git line said it did
[23:23:20] <Tom_itx> is there any code difference in lucid and wheezy as far as the lcnc code?
[23:26:47] <pcw_home> dont know what would be different, other than dist specific includes
[23:27:22] <Tom_itx> 2.5 was built on lucid right?
[23:27:35] <Tom_itx> the iso image...
[23:27:56] <pcw_home> Yes
[23:27:58] <Tom_itx> i didn't want to swap distros on this hdd
[23:28:12] <Tom_itx> rather just try 2.7 2.8 whatever...
[23:29:53] <pcw_home> I am running master on Trusty and Wheezy no real difference
[23:51:56] <Tom_itx> what does your git line look like?
[23:53:44] <pcw_home> not sure, been ages since I messed with that
[23:54:11] <Tom_itx> i think i got it goin
[23:54:51] <Tom_itx> hope it's the right branch
[23:56:04] <pcw_home> git branch -r for a list
[23:56:15] <Tom_itx> yeah
[23:59:02] <pcw_home> 2.7 and master have the new TP (and derived branches)