Back
[09:53:28] <KGB-linuxcnc> 03Sebastian Kuzminsky 052.6 866190d 06linuxcnc 10configs/sim/axis/remap/rack-toolchange/racktoolchange.ini sample configs: fix a typo in a comment * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=866190d
[10:46:40] <seb_kuzminsky> i'm not able to reproduce #394 (the "surprise move on abort in remap" bug) using sim/axis/remap/racktoolchange in the current tip of 2.6
[10:49:03] <seb_kuzminsky> every time i hit Escape in Axis while it's executing the remapped T-word, it stops right where it is and the DTG in the DRO shows the right remaining distance in the move i stopped it on
[10:49:31] <seb_kuzminsky> same with v2.6.2
[10:57:16] <jepler> seb_kuzminsky: did you reproduce it in any version?
[10:59:35] <seb_kuzminsky> no
[10:59:54] <seb_kuzminsky> i'm posting my how-to-fail-to-reproduce recipe to the bug, we'll see what OP says
[11:15:01] <cradek> thanks, that oughta help
[11:18:12] <seb_kuzminsky> grr, sf just ate my post to the bug :-(
[11:18:34] <seb_kuzminsky> i clicked Post and and it took me to the bug page without my new post
[11:18:48] * seb_kuzminsky types it again
[11:21:21] <cradek> their tracker is not the best.
[11:26:14] <seb_kuzminsky> ok that time it worked
[11:26:23] <seb_kuzminsky> has anyone else tried to repro it?
[11:26:29] <seb_kuzminsky> maybe i'm missing something...
[11:31:04] <cradek> did you try some tool changes?
[11:31:15] <cradek> (no I haven't)
[11:37:11] <seb_kuzminsky> the auto-loaded program for that sample config consists almost exclusively of tool changes
[11:37:26] <cradek> oh ok, I thought you meant the splash screen
[11:37:42] <seb_kuzminsky> yeah i said that confusingly
[11:37:44] <seb_kuzminsky> :-(
[11:38:00] <seb_kuzminsky> that sample config provides its own splash screen that does remapped tool changes
[11:53:22] <KGB-linuxcnc> 03Jeff Epler 05jepler/proposed-master 8397424 06linuxcnc 10scripts/linuxcnc.in runscript: EMCTASK is a HAL component now * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=8397424
[11:53:23] <KGB-linuxcnc> 03Jeff Epler 05jepler/proposed-master c4a9e23 06linuxcnc 03configs/sim/axis/calib_helper.hal 10configs/sim/axis/ini_hal_demo.ini 10configs/sim/axis/ini_hal_pins.tcl 04configs/sim/axis/postgui_calib_helper.hal ini_hal_demo: no need for delay-loading tricks * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=c4a9e23
[12:07:26] <jepler> + if(setsid() < 0);
[12:07:26] <jepler> + perror("daemonize: setsid()");
[12:07:35] <jepler> gee why do I always get 'daemonize: setsid(): Success' printed
[12:07:42] <cradek> gee
[12:10:00] <KGB-linuxcnc> 03Jeff Epler 05jepler/proposed-master f35374f 06linuxcnc 10scripts/linuxcnc.in runscript: EMCTASK is a HAL component now * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=f35374f
[12:10:01] <KGB-linuxcnc> 03Jeff Epler 05jepler/proposed-master 02985fd 06linuxcnc 03configs/sim/axis/calib_helper.hal 10configs/sim/axis/ini_hal_demo.ini 10configs/sim/axis/ini_hal_pins.tcl 04configs/sim/axis/postgui_calib_helper.hal ini_hal_demo: no need for delay-loading tricks * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=02985fd
[12:10:01] <KGB-linuxcnc> 03Jeff Epler 05jepler/proposed-master 95ac639 06linuxcnc 10scripts/linuxcnc.in 10src/emc/task/emcsvr.cc emcsvr: daemonize after setup is complete * 14http://git.linuxcnc.org/?p=linuxcnc.git;a=commitdiff;h=95ac639
[12:15:36] * jepler declares 'war on sleep', it's not what you think
[12:21:21] <seb_kuzminsky> there's a cause we can all rally behind
[12:21:55] <seb_kuzminsky> hey, sleep was the cause of the bug i wrote into the halui-jogging test, that i fixed recently!
[12:22:03] <archivist> but it is warm in bed!
[12:22:40] <archivist> I remember sleep in early windows and riscos yuk
[12:27:43] <linuxcnc-build> build #660 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/660 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:27:43] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:27:43] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:29:05] <linuxcnc-build> build #851 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/851 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac
[12:29:05] <linuxcnc-build> Storer <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:29:05] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:29:05] <linuxcnc-build> build #660 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/660 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:29:05] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:29:06] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:30:02] <linuxcnc-build> build #317 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/317 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:30:02] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:30:02] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:30:59] <linuxcnc-build> build #171 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/171 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:30:59] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:30:59] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:32:08] <seb_kuzminsky> funny to see all those famous names in our git history now
[12:32:27] <seb_kuzminsky> "in computer science we stand on each others feet"
[12:36:49] <linuxcnc-build> build #690 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/690 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:36:49] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:36:49] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:42:10] <cradek> who are all these people?
[12:42:55] <linuxcnc-build> build #2503 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/2503 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:42:55] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:42:55] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:43:53] <linuxcnc-build> build #2504 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/2504 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:43:53] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:43:53] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:44:15] <linuxcnc-build> build #1704 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/1704 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:44:15] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:44:15] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:44:28] <linuxcnc-build> build #2502 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/2502 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:44:28] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:44:28] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:44:47] <CaptHindsight> Linus Torvalds <torvalds@ppc970.osdl.org> was dabbling in this?
[12:45:04] <archivist> is something broken?
[12:45:56] <linuxcnc-build> build #2503 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/2503 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:45:56] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:45:56] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:46:43] <linuxcnc-build> build #2503 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/2503 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer
[12:46:43] <linuxcnc-build> <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>, Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley
[12:46:43] <linuxcnc-build> <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>, Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:46:43] <linuxcnc-build> build #2511 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2511 blamelist: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>, dummy, Norbert Schechner <nieson@web.de>, Alexey Dobriyan <adobriyan@gmail.com>, Zac Storer <zac.3.14159@gmail.com>, Willy Tarreau <w@1wt.eu>,
[12:46:43] <linuxcnc-build> Linus Torvalds <torvalds@ppc970.osdl.org>, Chris Morley <chrisinnanaimo@hotmail.com>, John Thornton <jthornton@gnipsel.com>, Jim Meyering <jim@meyering.net>, Miklos Vajna <vmiklos@frugalware.org>, Jeff Epler <jepler@unpythonic.net>, Junio C Hamano <gitster@pobox.com>, Chris S Morley <chrisinnanaimo@hotmail.com>, Dewey Garrett <dgarrett@panix.com>,
[12:46:44] <linuxcnc-build> Ramkumar Ramachandra <artagnon@gmail.com>, Greg KH <greg@kroah.com>, Sebastian Kuzminsky <seb@highlab.com>, W. Trevor King <wking@tremily.us>
[12:58:20] <seb_kuzminsky> archivist: looks like the branch jepler just pushed broke all the tests somehow
[12:58:41] <seb_kuzminsky> CaptHindsight: jepler merged in the Signed-Off-By work from Linus et al
[13:00:42] <linuxcnc-build> build #661 of 1403.rip-wheezy-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1403.rip-wheezy-amd64/builds/661 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:01:13] <linuxcnc-build> build #852 of 1404.rip-wheezy-rtpreempt-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1404.rip-wheezy-rtpreempt-amd64/builds/852 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:01:30] <linuxcnc-build> build #661 of 1400.rip-wheezy-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1400.rip-wheezy-i386/builds/661 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:02:18] <linuxcnc-build> build #318 of 1401.rip-wheezy-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1401.rip-wheezy-rtai-i386/builds/318 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:02:38] <linuxcnc-build> build #172 of 1402.rip-wheezy-rtpreempt-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1402.rip-wheezy-rtpreempt-i386/builds/172 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:10:08] <linuxcnc-build> build #691 of 1405.rip-wheezy-armhf is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1405.rip-wheezy-armhf/builds/691 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:13:56] <linuxcnc-build> build #2503 of 1300.rip-precise-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1300.rip-precise-i386/builds/2503 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:14:51] <linuxcnc-build> build #2505 of 1306.rip-precise-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1306.rip-precise-amd64/builds/2505 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:15:19] <linuxcnc-build> build #1705 of 1301.rip-precise-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1301.rip-precise-rtai-i386/builds/1705 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:15:40] <linuxcnc-build> build #2504 of 1200.rip-lucid-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1200.rip-lucid-i386/builds/2504 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:16:31] <jepler> hmmm that doesn't look good
[13:17:16] <linuxcnc-build> build #2504 of 1202.rip-lucid-amd64 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1202.rip-lucid-amd64/builds/2504 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:18:17] <linuxcnc-build> build #2504 of 1201.rip-lucid-rtai-i386 is complete: Failure [4failed compile runtests] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/1201.rip-lucid-rtai-i386/builds/2504 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:18:18] <linuxcnc-build> build #2512 of 0000.checkin is complete: Failure [4failed] Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2512 blamelist: dummy, Jeff Epler <jepler@unpythonic.net>
[13:18:56] <jepler> seb_kuzminsky: I'm afraid you'll have to bounce the buildbot due to this
[13:18:58] <jepler> > halrun: Realtime already running. Use 'halrun -U' to stop existing realtime session.
[13:19:03] <jepler> er, the various buildslaves that is
[13:26:56] <skunkworks> logger[psha]:
[13:26:56] <logger[psha]> skunkworks: Log stored at
http://psha.org.ru/irc/%23linuxcnc-devel/2014-10-14.html
[14:06:31] <cradek> now that same student sent me the email (but didn't change "jeff" to "chris")
[15:10:14] <seb_kuzminsky> jepler: ok, will do, hold on
[15:28:52] <seb_kuzminsky> cradek: are people getting spammed for homework help?
[15:29:38] <jepler> seb_kuzminsky: I've gotten several messages from a certain individual about vismach
[15:29:46] <jepler> but I'm accustomed to ignoring private messages about linuxcnc
[15:30:04] <cradek> andy and jmk got it too
[15:30:32] <jepler> I also got one via the website / forum somehow, and I'm more irritated that I couldn't find any setting to disable e-mailing me that way
[15:30:44] <cradek> of course the question is very vague
[15:31:59] <cradek> and it looks more like master's thesis than homework
[15:32:35] <jepler> it occurs to me that people in academia have a goal of making their work understood by others
[15:32:52] <jepler> in which case, the "if you don't understand it, read the source more" attitude is perplexing
[15:34:34] <cradek> I can't tell if he's asking to ask, or if he has done no work at all himself, and so doesn't even know what question to ask
[15:34:57] <cradek> I don't think I'll reply. I know at least andy and jmk have replied to him privately already.
[15:35:09] <jepler> they're kinder people than me
[15:35:35] <jepler> I don't have anything nice to say, so I try saying nothing at all
[15:59:42] <seb_kuzminsky> hm, that wasn't supposed to restart yet
[15:59:56] <seb_kuzminsky> i guess it restarted all the VMs when i upgraded libvirt on the hypervisor host
[16:19:01] <jepler> seb_kuzminsky: it occurs to me that, if it were feasible, it might make sense to reboot a buildslave after a failure in runtests (specifically)
[16:23:25] <seb_kuzminsky> that sounds like a good idae
[16:24:11] <seb_kuzminsky> runtests || reboot
[16:27:00] <jepler> not sure if it's quite that simple; if a buildslave disappears during a build, doesn't it restart that build rather than abandon it?
[16:31:05] <seb_kuzminsky> yeah, and we'd like to run the later steps (like "dmesg") before rebooting
[16:31:10] <seb_kuzminsky> i was being flippant
[17:10:31] <seb_kuzminsky> ok, it should work now
[17:10:37] <jepler> seb_kuzminsky: woo
[17:10:43] * jepler rushes to push a bad change
[17:11:00] <jepler> linuxcnc-build: force build --branch=jepler/proposed-master 0000.checkin
[17:11:01] <linuxcnc-build> build #2513 forced
[17:11:01] <linuxcnc-build> I'll give a shout when the build finishes
[17:13:31] <seb_kuzminsky> cool
[17:59:18] <jepler> looking forward to friday!
[17:59:23] <jepler> and the ensuing days of course
[18:00:23] <seb_kuzminsky> me too :-)
[18:00:47] <brianmorel99> Seb: Do you use gpg agent or something so you don't have to enter you passphrase all the time when building?
[18:01:14] <seb_kuzminsky> brianmorel99: i use gpgagent, and i also made a special key just for signing the deb archive, without a passphrase
[18:01:28] <seb_kuzminsky> (the real deb archive a www.linuxcnc.org is signed with a key that *does* have a passphrase, of course)
[18:02:47] <brianmorel99> seb_kuzminsky: Ok, I set up a Wheezy VM over the weekend, and I'm getting along pretty well. Tried to run a build last night, but it stopped in the middle of the night looking for my passphrase.
[18:05:56] <brianmorel99> Wheezy portion built fine, but it errored out on precise again.
[18:06:19] <brianmorel99> kernel-wedge not trusted, need to look at getting my key added there.
[18:07:48] <linuxcnc-build> Hey! build 0000.checkin #2513 is complete: Success [3build successful]
[18:07:48] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/0000.checkin/builds/2513
[18:16:16] <seb_kuzminsky> is your local archive signing key available inside the precise pbuilder? it should be, if it was created by the build system in the normal way
[18:17:07] <brianmorel99> I believe so, but I'm not entirely sure, need to dig a bit
[18:36:29] <brianmorel99> Thinking may be I need to add my key to apt in the chroot. We'll see, firing off another round of building.
[18:40:02] <seb_kuzminsky> the pbuilder chroot is created by the top-level Makefile, and it should put the key in correctly if you set ARCHIVE_SIGNING_KEY at the top of the makefile
[18:49:04] <brianmorel99> I have it that way, I just wasn't sure that it makes it to apt-get's trusted. It's in pbuilder keyring, so probably does. Haven't followed it that far.
[19:01:43] <brianmorel99> I see now where it's added in pbuilderrc. More digging
[19:06:35] <seb_kuzminsky> i feel like someone's digging through my dirty laundry
[19:06:38] <seb_kuzminsky> sorry for the bad smells
[19:07:36] <brianmorel99> Not at all, it's actually a fun learning experience.
[19:09:47] <seb_kuzminsky> cool
[19:09:50] <seb_kuzminsky> pbuilder is good stuff
[19:10:00] <seb_kuzminsky> it's how we build debs of linuxcnc in the buildbot too, btw
[20:38:27] <jepler> the technical issues doing a presentation from my chromebook have me reconsidering going without my x86 debian laptop :-/
[20:38:45] <jepler> (a presentation which includes running linuxcnc in the middle; other than that, it would probably be OK)
[20:39:49] <jepler> I'm considering whether to not do the live coding part I'd envisioned, and instead putting an introduction to HAL at the start
[20:39:57] <jepler> I wish I knew better who my audience will be
[21:17:58] <cradek> surely you could borrow a computer
[21:18:13] <cradek> or you could put one in the car
[21:18:55] <cradek> depends on whether it's traveling light, or the illusion of living in the future, that's more important to you
[21:45:00] <seb_kuzminsky> didnt someone port linuxcnc to armhf?
[21:45:04] <seb_kuzminsky> wasnt it... jepler?
[22:05:00] <jepler_> seb_kuzminsky: the problems arise on the chromebook when using an external monitor and debian linux via crouton; something nontrivial stops debian from knowing the correct geometry of the two displays
[22:06:27] <cradek> huh, I haven't had a machining injury for a while (it's very minor but means I was being stupid)
[22:06:49] <jepler> cradek: ow sorry to hear it
[22:06:51] <jepler> 'night all
[22:06:56] <cradek> g'night
[22:09:47] <cradek> and it's my mouse-nipple finger, haha