Back
[00:18:27] <seb_kuzminsky> kernel modules accidentally left loaded on precise-rtai-x86
[00:18:39] <seb_kuzminsky> shmdrv is the only one
[00:19:07] <seb_kuzminsky> after the runtests from master finishes, at least... looks like more stuff was loaded earlier
[00:20:05] <seb_kuzminsky> shmdrv also thinks it's in use still (use count is 1), but no kernel module claims to be using it, and no suspicious-looking userspace process is running
[00:20:08] <seb_kuzminsky> guess i'll reboot
[00:20:16] <seb_kuzminsky> linuxcnc-build: force build --branch=master
[00:20:19] <linuxcnc-build> you must provide a Builder, try 'force build [--branch=BRANCH] [--revision=REVISION] [--props=PROP1=VAL1,PROP2=VAL2...] <WHICH> <REASON>'
[00:20:21] <seb_kuzminsky> linuxcnc-build: force build --branch=master checkin
[00:20:23] <linuxcnc-build> build forced [ETA 1h36m35s]
[00:20:23] <linuxcnc-build> I'll give a shout when the build finishes
[01:26:42] <linuxcnc-build> Hey! build checkin #1221 is complete: Success [3build successful]
[01:26:42] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/1221
[02:11:18] <KGB-linuxcnc> 03seb 05master 819b1f7 06linuxcnc 10docs/ 10src/Master_HAL_es.txt 10src/index.tmpl 10src/index_es.tmpl * docs: remove some stray references to polish docs
[02:11:18] <KGB-linuxcnc> 03seb 05master c1f3edc 06linuxcnc 10docs/ 10src/index.tmpl 10src/index_es.tmpl * docs: remove an old comment
[02:11:22] <KGB-linuxcnc> 03seb 05master b2c4913 06linuxcnc 10debian/ 10configure 10control.in 04linuxcnc-doc-pl.files.in * deb: dont build polish docs package
[02:11:29] <KGB-linuxcnc> 03seb 05master 54e44a0 06linuxcnc 10docs/ 10(89 files in 13 dirs) * docs: remove polish docs
[12:07:45] <cradek> seb_kuzminsky: thanks for doing that work
[12:21:59] <seb_kuzminsky> my pleasure, srsly
[12:22:18] <seb_kuzminsky> good riddance
[12:22:30] <seb_kuzminsky> thanks to jthornton for championing that item :-)
[12:33:39] <seb_kuzminsky> linuxcnc-build: force build --branch=master docs
[12:33:40] <linuxcnc-build> build #967 forced
[12:33:40] <linuxcnc-build> I'll give a shout when the build finishes
[12:47:15] <linuxcnc-build> Hey! build docs #967 is complete: Warnings [8warnings compile]
[12:47:15] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/docs/builds/967
[12:51:33] <seb_kuzminsky> linuxcnc-build: force build --branch=master docs
[12:51:45] <seb_kuzminsky> linuxcnc-build: force build --branch=master docs
[12:51:46] <linuxcnc-build> build #968 forced
[12:51:46] <linuxcnc-build> I'll give a shout when the build finishes
[13:05:14] <linuxcnc-build> Hey! build docs #968 is complete: Warnings [8warnings compile]
[13:05:14] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/docs/builds/968
[13:09:50] <seb_kuzminsky> linuxcnc-build: force build --branch=master checkin
[13:09:51] <linuxcnc-build> build #1223 forced
[13:09:51] <linuxcnc-build> I'll give a shout when the build finishes
[13:10:05] <seb_kuzminsky> ok, the docs builder detects asciidoc warnings & errors more correctly now
[13:10:13] <seb_kuzminsky> and oh boy we got some warnings
[13:10:31] <seb_kuzminsky> http://buildbot.linuxcnc.org/buildbot/builders/docs/builds/968/steps/compile/logs/warnings%20%28282%29
[14:08:21] <linuxcnc-build> Hey! build checkin #1223 is complete: Success [3build successful]
[14:08:21] <linuxcnc-build> Build details are at
http://buildbot.linuxcnc.org/buildbot/builders/checkin/builds/1223
[15:11:07] <jthornton> seb_kuzminsky, thanks for deleting them, now if I can my links to work I can push some docs work
[15:14:26] <seb_kuzminsky> yay :-)
[15:49:00] <cradek> http://linuxcnc.org/index.php/english/forum/38-general-linuxcnc-questions/26427-s
[15:49:11] <cradek> oops
[15:49:21] <cradek> http://linuxcnc.org/index.php/english/forum/38-general-linuxcnc-questions/26427-setting-initval-of-a-spinbox-in-hal?start=30#36774
[15:49:45] <seb_kuzminsky> what is the world coming to
[15:49:50] <seb_kuzminsky> cradek is posting forum links now
[15:50:14] <cradek> rss2email works fine - the forum is easy to read, it's only a pain when you want to reply
[15:50:23] <cradek> (not that I really keep up with it)
[15:55:57] <andypugh> I think there might be an assumption that somebody assigns patches/bugs to developers, rather than it being the job of the submitter to choose a developer at random and hope they pick one who is still involved.
[16:38:56] <seb_kuzminsky> did ArcEye post anything to emc-developers about his patch? if so i missed it
[16:52:19] <andypugh> http://article.gmane.org/gmane.linux.distributions.emc.devel/9551/match=widget
[16:55:16] <seb_kuzminsky> ok then
[16:56:50] <andypugh> Ah, cradek re-assigned to "nobody". Naughty Cradek!
[18:22:47] <andypugh> Is this a simple problem?
[18:22:48] <andypugh> andypugh@DN2800-precise:~/linuxcnc-dev/src$ ./configure
[18:22:49] <andypugh> checking libgl1-mesa-dri workaround... test for libgl1-mesa-dri workaround failed, please file a bug
[18:23:54] <cradek> do you have libgl1-mesa-dev installed?
[18:24:09] <andypugh> I have no idea :-)
[18:24:26] <cradek> you should probably do the dpkg-checkbuilddeps procedure that seb always describes
[18:25:15] <andypugh> I suspect the problem is not having the linuxcnc-dev package
[18:25:53] <andypugh> Which is probably due to not having the right apt/sources linuxcnc entry
[18:26:24] <andypugh> (MAybe starting from vanilla Precise ISO then installing Xenomai wasn't the best way?)
[18:26:55] <cradek> I'm not sure how else you'd do it?
[18:27:11] <andypugh> With knowledge and skill?
[18:37:44] <cradek> sorry, no experience with that
[18:42:12] <andypugh> I think I am there, but after installing all the dependencies, my disc is full!
[19:03:59] <andypugh> And the x-server is screwed up so it is refusing to display anything, simply entering a loop where it pretends to offer me the opportunity to run in low graphics mode.
[19:04:31] <andypugh> Looks like I might need to (rather painfully) start all over again.
[21:27:16] <andypugh> Not impressed by Precise so far. Unrecoverable errors uninstalling Libre Office. And, to trump that "The problem report is damaged and can not be recovered"
[21:45:40] <andypugh> And it thinks I have a 1920x1024 laptop display as well as the actual one. So won't let me select a resolution that puts the menu bar actually on the screen.
[21:46:05] <andypugh> This is turning into a really negative experience.
[21:51:56] <Tom_itx> maybe your full hdd is causing some of it
[22:01:38] <andypugh> This is a bare-metal reinstall !
[22:02:25] <andypugh> I already decided that the full drive meant that I would not be able to do anything to recover it
[22:16:44] <CaptHindsight> wiki.linuxcnc.org brings up
http://tabsnoprescription.com/buy-zestril-usa.html
[22:20:22] <CaptHindsight> the wiki tab on the
http://www.linuxcnc.org/ brings up the online pharmacy
[22:21:08] <CaptHindsight> now it's fine never mind
[23:37:01] <seb_kuzminsky> memleak: i just tried to apply your rtai kernel patch hal-linux-3.4.53-x86-1.patch
[23:37:12] <seb_kuzminsky> it doesn't apply to 3.4.53
[23:38:17] <seb_kuzminsky> oh i see, it applies with 'patch' but not with 'git apply'
[23:38:25] <seb_kuzminsky> never mind me