#hazzy Logs

Sep 18 2020

02:21 AM Joco[m]: think I might have figured out the paths a bit better.
02:21 AM * Joco[m] uploaded an image: image.png (98KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/TJWTUgUJlZaqpsXwYgQsvCkf/image.png >
04:47 AM JT-Cave: morning
04:57 AM -!- #hazzy mode set to +o by ChanServ
06:24 AM TurBoss: morning
07:02 AM TurBoss: I had a curious discovery
07:02 AM TurBoss: if i press the shutdown button once the latency spike to 1700000
07:02 AM TurBoss: i fixed by setting "don't ask" or "do nothing" in the energy settings
07:02 AM TurBoss: * I had a curious discovery
07:02 AM TurBoss: if i press the shutdown button once the latency spikes to 1700000
07:02 AM TurBoss: i fixed by setting "don't ask" or "do nothing" in the energy settings
07:03 AM TurBoss: so you can press the button and don't mess the latency
07:34 AM Lcvette: morning
07:37 AM Lcvette: TurBoss: no i don't see the work bench in this one
07:37 AM TurBoss: is a dropdown in the top bar
07:40 AM TurBoss: hello
07:41 AM * TurBoss uploaded an image: Captura de pantalla de 2020-09-18 14-40-46.png (8KiB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/kYYxsBkuSZcvLaNzKNiYVNin/Captura de pantalla de 2020-09-18 14-40-46.png >
07:41 AM * TurBoss uploaded an image: Captura de pantalla de 2020-09-18 14-40-40.png (6KiB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/lLvrPekyeNuhMQvQYiVblKXP/Captura de pantalla de 2020-09-18 14-40-40.png >
08:23 AM Lcvette: i found it
08:23 AM Lcvette: its very un intuitive
08:23 AM Lcvette: :(
08:23 AM Lcvette: i remember why i stopped using it
08:26 AM TurBoss: :)
09:09 AM Lcvette: lcvette just can't find the intuitive flow of freecad
09:09 AM Lcvette: i know it has to be there
09:10 AM Lcvette: but nothing seems to make sense
09:10 AM TurBoss: what you whatn to ?
09:11 AM Lcvette: i made a basic model and am trying to see how to make toolpaths
09:11 AM * Lcvette uploaded an image: Screenshot_2020-09-18_10-11-04.png (158KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/tghRWOhQvxjHtmmgEBLEHlqg/Screenshot_2020-09-18_10-11-04.png >
09:11 AM TurBoss: you go to part design draw some parts the swich to path workbench
09:12 AM TurBoss: pick faces an apply some procedure
09:13 AM Lcvette: im at the pick geometry and still don't see how to make toolpaths
09:13 AM * TurBoss uploaded an image: Captura de pantalla de 2020-09-18 16-12-46.png (9KiB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/qjoENRhDdGtupCgkaOqSfbiA/Captura de pantalla de 2020-09-18 16-12-46.png >
09:13 AM Lcvette: not important
09:13 AM Lcvette: it is still not intuitive enough for me to stay interested in it
09:14 AM Lcvette: it is very slow compared to fusion
09:14 AM Lcvette: the time savings alone are worth the small cost of fusion
09:14 AM TurBoss: what you pay is what you get lol
09:14 AM TurBoss: :D
09:14 AM Lcvette: yes 100% true, this is a great powerful software for free
09:14 AM Lcvette: there is no complaining about the price for sure!
09:15 AM Lcvette: :D
09:15 AM TurBoss: :-)
09:15 AM Lcvette: it is fantastic for those who need a working cad/cam
09:15 AM Lcvette: and im sure with practice it would get easier
09:18 AM TurBoss: https://yinsbeigebox.wordpress.com/2016/10/12/if-cad-programs-were-cars/
09:21 AM Lcvette: :D
09:21 AM Lcvette: hahahahaha
09:21 AM Lcvette: very true
09:24 AM TurBoss: OpenSCAD
09:24 AM TurBoss: https://github.com/jdunmire/kicad-ESP8266/blob/master/ESP8266.3dshapes/ESP-13-wroom-02.scad
10:25 AM Lcvette: TurBoss: do you remember what is left for PB Lathe?
10:25 AM TurBoss: hmmmm
10:25 AM TurBoss: we where working on...
10:25 AM TurBoss: vtk plot 2d?
10:26 AM TurBoss: it work?
10:26 AM TurBoss: * it works?
10:26 AM Lcvette: testing
10:27 AM Lcvette: wrong orientation
10:27 AM TurBoss: oh
10:28 AM * Lcvette uploaded an image: Screenshot_2020-09-18_11-27-40.png (43KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/FiDIeYbUrauzeruOigqBAmyU/Screenshot_2020-09-18_11-27-40.png >
10:28 AM Lcvette: ^^^TurBoss:
10:28 AM Lcvette: * TurBoss: ^^^
10:28 AM TurBoss: that on views?
10:29 AM Lcvette: that is start up view
10:29 AM TurBoss: I'm trying to boot dev
10:29 AM Lcvette: k
10:29 AM TurBoss: it refused yesterday
10:29 AM Lcvette: :D
10:30 AM TurBoss: noway I have to plug the lappy
10:31 AM Lcvette: you broke dev?
10:31 AM Lcvette: :o
10:31 AM Lcvette: /o\
10:37 AM Lcvette: i made an xz view button but it seems to show a xy view instead of xz
10:37 AM TurBoss: ok
10:38 AM TurBoss: that can be
10:38 AM TurBoss: i think i messed 1 -1
10:38 AM Lcvette: ok
10:44 AM TurBoss: dev lappy up and running
10:45 AM Lcvette: what vtk file?
10:45 AM TurBoss: vtk_backplot
10:45 AM TurBoss: is the main file
10:45 AM * Lcvette uploaded an image: Screenshot_2020-09-18_11-45-18.png (39KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/OcoiSvIcixfOHERKPQbBHjtw/Screenshot_2020-09-18_11-45-18.png >
10:45 AM TurBoss: yes
10:47 AM TurBoss: Lcvette: line 930 and 931
10:50 AM Lcvette: i tried moving some things
10:50 AM TurBoss: yup
10:50 AM TurBoss: works?
10:50 AM Lcvette: but not successful yet
10:50 AM TurBoss: great
10:50 AM TurBoss: View stuff goes to line 142
10:50 AM TurBoss: * View stuff goes to line 1042
10:53 AM Lcvette: 90,1,0)
10:53 AM Lcvette: can numbers be -1?
10:53 AM Lcvette: * (0,1,0)
10:53 AM Lcvette: (0,-1,0
10:53 AM TurBoss: in wich line are you?
10:53 AM TurBoss: yes
10:53 AM Lcvette: 930 931
10:53 AM TurBoss: 1 should be front -1 back
10:56 AM Lcvette: lcvette can't find a combination that works
10:56 AM Lcvette: 1042 there is not much?
10:57 AM * Lcvette uploaded an image: Screenshot_2020-09-18_11-56-38.png (7KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ziNxDhnNiUZzyeXFBIpLHuCm/Screenshot_2020-09-18_11-56-38.png >
10:58 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/jCHHCewdjnjmaFgzMkIWdcXw/message.txt >
10:58 AM TurBoss: one for each function
10:58 AM TurBoss: self.camera.SetPosition(0, 0, self.position_mult) can change too
10:59 AM TurBoss: I'm searching for a reasonable doc
10:59 AM TurBoss: ```
11:00 AM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/JbvXZIHqyMlUYPuWDGHvjAOQ/message.txt >
11:00 AM TurBoss: aka X Y Z
11:05 AM TurBoss: so havine X0 Y0 Z0 we place the camera at X0 Y0 Z1 then rotate the camera to X0, Y0, Z0
11:05 AM TurBoss: * so having X0 Y0 Z0 we place the camera at X0 Y0 Z1 then rotate the camera to X0, Y0, Z0
11:06 AM TurBoss: https://vtk.org/doc/nightly/html/classvtkCamera.html
11:12 AM Lcvette: ok back sorry phone call came in
11:12 AM Lcvette: TurBoss: whats double mean?
11:12 AM Lcvette: :o
11:13 AM TurBoss: float
11:13 AM TurBoss: 1,3
11:13 AM TurBoss: * 1.3
11:13 AM Lcvette: do you know what does whatwhat do the numbers represent?
11:14 AM TurBoss: yes basicaly what i said
11:14 AM Lcvette: 0 = 0 degree angle
11:14 AM Lcvette: 1 = 90 degree angle
11:14 AM Lcvette: -1= -90 degree angle?
11:14 AM TurBoss: <TurBoss "so havine X0 Y0 Z0 we place the "> ^^
11:14 AM Lcvette: or something different?
11:14 AM Lcvette: trying to see the representation so i can figure whats needed
11:14 AM TurBoss: position
11:14 AM Lcvette: we nmeed a reference
11:15 AM TurBoss: making cool vid
11:15 AM Lcvette: i can model one up if i knew what it should show for the different positions
11:15 AM Lcvette: you are?
11:15 AM Lcvette: :D
11:15 AM Lcvette: \o/
11:16 AM TurBoss: i'm in
11:16 AM Lcvette: your speaking in turboss code again
11:16 AM Lcvette: need more words
11:16 AM Lcvette: l;ol
11:16 AM Lcvette: * lol
11:16 AM TurBoss: :/
11:17 AM Lcvette: lcvette us going to hack turboss's screen so he can see
11:17 AM Lcvette: * lcvette is going to hack turboss's screen so he can see
11:17 AM Lcvette: lcvette goes to learn how to hack
11:17 AM Lcvette: be back in 2 decades
11:17 AM Lcvette: lol
11:18 AM Lcvette: :D
11:18 AM Lcvette: /o\
11:18 AM TurBoss: lol
11:18 AM TurBoss: 2 min
11:18 AM Lcvette: kk
11:25 AM * TurBoss uploaded a video: plot camera.webm (3469KiB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/MdTGksuneGrdnbuRGBJojkvM/plot camera.webm >
11:25 AM TurBoss: Lcvette: incoming transmission
11:25 AM Lcvette: :o
11:25 AM TurBoss: brb I'll be at mobile
11:28 AM Lcvette: ok
11:28 AM Lcvette: nice video
11:28 AM Lcvette: what sopftware is it?
11:28 AM Lcvette: it could be helpful; for sorting out things
11:28 AM Lcvette: in vtk for view and camera
11:31 AM Lcvette: i found blender
11:31 AM Lcvette: installing
11:38 AM Lcvette: nope lcvette can't figure it
11:40 AM TurBoss: blender
11:42 AM Lcvette: i can't seem to make z go left to right
11:44 AM CaptHindsight: TurBoss: was the source for this posted somewhere? I forget since it was in March or April https://matrix.org/_matrix/media/r0/download/matrix.org/WJhoZdzdZQSrtvrgbeWdsfIJ
11:45 AM TurBoss: hello
11:45 AM CaptHindsight: https://github.com/sn4k3/UVtools interesting
11:46 AM TurBoss: yes
11:47 AM CaptHindsight: the openCV start for the widget is here https://github.com/TurBoss/VideoVCP
11:47 AM TurBoss: <TurBoss "SvgSlicerHAL2.webm"> CaptHindsight check this vid
11:48 AM TurBoss: <TurBoss "https://github.com/kcjengr/qtpyv"> link
11:49 AM CaptHindsight: https://github.com/kcjengr/qtpyvcp
11:49 AM TurBoss: https://github.com/kcjengr/qtpyvcp.additive-manufacturing
11:49 AM TurBoss: link
11:50 AM TurBoss: opencv is there too
11:50 AM CaptHindsight: https://github.com/kcjengr/qtpyvcp.computer-vision
11:51 AM CaptHindsight: ok so they are going to be on his git
11:51 AM Lcvette: TurBoss: can't figure
11:52 AM TurBoss: ok will look in 1h
11:52 AM Lcvette: k
11:55 AM TurBoss: CaptHindsight: yes, is fine?
11:56 AM CaptHindsight: just asking, it's been so long i don't remember where things are at
11:56 AM CaptHindsight: back in a few minutes
11:58 AM Lcvette: vtk is evil
11:58 AM Lcvette: /o\
12:30 PM TurBoss: whats cracking Lcvette ??
12:30 PM Lcvette: my brain
12:31 PM Lcvette: i cannot make vtk do what lathe view needs
12:31 PM TurBoss: :o
12:31 PM Lcvette: /o\
12:31 PM TurBoss: vtk is maybe the mos complex widget we have
12:31 PM Lcvette: truth
12:31 PM Lcvette: how can i rotate the direction the z axis is displayed?
12:32 PM Lcvette: it seems i can only make it point one of two directions no matter what entries i put in line 931 932
12:32 PM Lcvette: and how would we change the default view when lathe opens?
12:33 PM Lcvette: we need X| and Z__
12:33 PM Lcvette: X|___Z
12:34 PM Lcvette: Z+ --->
12:40 PM Lcvette: TurBoss: any ideas how to do?
12:41 PM Lcvette: need to set Y view up and rotate z view around y axis
12:41 PM Lcvette: do we need a rotation line?
12:41 PM Lcvette: is that where the issue is?
12:42 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/ToUfqNXNELNKSgDCpoCBeROm/message.txt >
12:43 PM Lcvette: ```
12:43 PM Lcvette: self.camera.SetRotation(0, 0, 0)
12:43 PM Lcvette: or something like that?
12:43 PM TurBoss: the plan is
12:43 PM TurBoss: place the camera x0 y1 z0
12:43 PM TurBoss: the set up 1 0 0 focampoint 0 0 0
12:43 PM TurBoss: makes sense?
12:44 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/VrZlKfhQuZAzqjfEEUNSkCXv/message.txt >
12:44 PM Lcvette: like this?
12:44 PM Lcvette: doesn't fix
12:45 PM Lcvette: oh wait, do i need to have qtpyvcp special lathe checked out
12:45 PM Lcvette: ?
12:45 PM Lcvette: does it have different vtk files?
12:45 PM Lcvette: something is foggy in memory about that
12:45 PM Lcvette: turboss ^^^
12:48 PM Lcvette: it looks like lathe is merged to master everywhere
12:48 PM Lcvette: lathe may need different vtk file?
12:48 PM Lcvette: at one point it was working correctly but now is broken so maybe a merge broke something?
12:52 PM TurBoss: 15 mim
12:52 PM TurBoss: xD
01:01 PM TurBoss: no , lathe needs a ini setting
01:02 PM TurBoss: lathe = true
01:18 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/bdEDPXknRzlKgUvMTJHDWWiZ/message.txt >
01:18 PM TurBoss: Lcvette: just got back
01:19 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/NTXdxYSUZQCUOWmMiENGaVyV/message.txt >
01:19 PM TurBoss: edit: typo
01:19 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/qxbXLRWJIVMpOTmFXwnEyTmn/message.txt >
01:19 PM Lcvette: true or 1?
01:19 PM Lcvette: TurBoss: ^^^
01:19 PM Lcvette: this is what it has now
01:19 PM TurBoss: is the same
01:20 PM Lcvette: ok
01:20 PM TurBoss: it must be a VTK bug since focus active part changes
01:21 PM Lcvette: i tried that 1, 0, 0 and it doesn't fix
01:21 PM TurBoss: but changing the fist line too?
01:22 PM * Lcvette uploaded an image: Screenshot_2020-09-18_14-21-46.png (13KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/GLFTCRwfGioMWHKqXSCkrPDr/Screenshot_2020-09-18_14-21-46.png >
01:22 PM Lcvette: hurray!!!
01:22 PM TurBoss: great!
01:22 PM Lcvette: i did not think about the first line
01:22 PM TurBoss: headshot
01:22 PM Lcvette: now how do we make that the standard opening view?
01:23 PM TurBoss: it isn't
01:23 PM TurBoss: ?¿
01:23 PM Lcvette: No
01:23 PM TurBoss: Lcvette: can we take a look all the other views?
01:23 PM Lcvette: Have to hit the view xz button to make it look correct
01:23 PM TurBoss: and the reversed focus
01:23 PM TurBoss: * and the reversed zoom
01:24 PM Lcvette: Sure
01:24 PM TurBoss: ok give me a sek
01:24 PM Lcvette: That's what I was thinking then make a release with lathe and latest probe basic
01:24 PM Lcvette: T
01:24 PM Lcvette: H
01:24 PM Lcvette: En work on latc
01:24 PM TurBoss: cool then I scared too much the other day
01:25 PM TurBoss: * cool then I scared that guy too much the other day
01:25 PM Lcvette: ???
01:25 PM Lcvette: Who you scare?
01:25 PM TurBoss: can't remember the name but a guy asked about lathe status
01:25 PM TurBoss: i said unknown
01:25 PM TurBoss: then he quit
01:25 PM TurBoss: :P
01:25 PM TurBoss: in short word
01:25 PM TurBoss: * in short words
01:26 PM TurBoss: maybe he still arround
01:26 PM Lcvette: Lol
01:26 PM Lcvette: I think everything else works in lathe
01:26 PM Lcvette: Was just vtk
01:26 PM TurBoss: cool I'm taking a look at the default stuff
01:28 PM Lcvette: Ok
01:37 PM TurBoss: Lcvette: the only thing that stops not setting the default view is the lathe option in the ini
01:37 PM Lcvette: I have that
01:38 PM Lcvette: S set to 1
01:38 PM Lcvette: What i pasted was from the ini
01:42 PM * Lcvette uploaded an image: Screenshot_2020-09-18_14-41-24.png (211KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/SSLPwCBgfCxjgwFAEHHDxYzF/Screenshot_2020-09-18_14-41-24.png >
01:57 PM Lcvette: do i need to change something?
01:58 PM TurBoss: looks good
01:58 PM Lcvette: but it gives wrong start up plotter view
01:58 PM TurBoss: can you try the ini thats on qtpyvcp/linuxcnc/config/sim.qtpyvcp/xz.ini ?
01:58 PM TurBoss: thats a lathe example
01:58 PM TurBoss: i did
01:59 PM Lcvette: dunno
01:59 PM Lcvette: i have this one set as launcher\
01:59 PM Lcvette: does it mkatter?
01:59 PM Lcvette: this ini has lathe = 1
01:59 PM TurBoss: yes true
01:59 PM Lcvette: if it doesn't work with that line it is broken
01:59 PM Lcvette: i think at least
01:59 PM Lcvette: i can change to true instead of 1 and test
02:00 PM * Lcvette uploaded an image: Screenshot_2020-09-18_15-00-05.png (18KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/BBQJbbePLqhncqPAfzhnlBqp/Screenshot_2020-09-18_15-00-05.png >
02:00 PM Lcvette: no change
02:00 PM Lcvette: z is still pointed upwards
02:02 PM Lcvette: TurBoss: where is the default view position lines?
02:02 PM Lcvette: mayb just needs same as xz view slot
02:02 PM Lcvette: ?
02:02 PM TurBoss: same file vtk_backplot
02:02 PM TurBoss: 432
02:02 PM TurBoss: * 431
02:02 PM Lcvette: 431
02:02 PM Lcvette: ?
02:02 PM Lcvette: ```
02:02 PM Lcvette: if self.lathe is True:
02:02 PM Lcvette: self.setViewXZ()
02:03 PM TurBoss: yes
02:03 PM TurBoss: that is
02:04 PM Lcvette: so this is just activating the xzview in lines 931
02:04 PM Lcvette: so should work but doesn't seem to
02:04 PM TurBoss: yes
02:04 PM TurBoss: its not reading the ini correctly aparently
02:05 PM Lcvette: ok
02:05 PM Lcvette: need to put it in a different line in the ini maybe?
02:06 PM Lcvette: no change when i moved it in the ini to bottom row under [DISPLAY]
02:07 PM TurBoss: ya tried that also
02:07 PM TurBoss: :(
02:08 PM Lcvette: this is a dragon to be slayed
02:09 PM TurBoss: brb
02:10 PM Lcvette: ok
02:20 PM TurBoss: back
02:26 PM Lcvette: \o/ hurray turboss returns
02:26 PM TurBoss: oh ok I figured hazzy changed settings
02:26 PM Lcvette: hazzy broke?
02:26 PM Lcvette: /o\
02:27 PM TurBoss: xD
02:27 PM Lcvette: lol
02:27 PM TurBoss: I can fix i hop
02:27 PM Lcvette: its all Hazzy's fault
02:27 PM TurBoss: 🤣
02:27 PM hazzy-m: As usual
02:27 PM Lcvette: :D
02:27 PM TurBoss: ahhaahhah
02:27 PM Lcvette: hahaha Hazzy the destructor
02:27 PM TurBoss: i figured anyway
02:27 PM Lcvette: hurray
02:29 PM TurBoss: Lcvette: ZX or XZ?
02:29 PM Lcvette: :o
02:30 PM Lcvette: z to the right and x should be up or down
02:30 PM TurBoss: oh is actually on the function name
02:30 PM Lcvette: and we should make so it could display either way with an option
02:32 PM TurBoss: hazzy: made the views a setting so its persistent
02:33 PM Lcvette: ah
02:33 PM Lcvette: how to do?
02:34 PM TurBoss: duno
02:34 PM Lcvette: /o\
02:34 PM Lcvette: HAAAAZZZZZZZZYYYYY
02:34 PM TurBoss: ⛵️
02:34 PM Lcvette: lol
02:35 PM Lcvette: im confused, what type o order is it?
02:37 PM TurBoss: also zoom is reverted?
02:39 PM Not-8b99: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JU0FP
02:39 PM Not-8b99: [02qtpyvcp] 07TurBoss 037fddf23 - fix reversed zoom
02:39 PM TurBoss: ok fixed that one
02:41 PM Not-8b99: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+523/-0/±0] 13https://git.io/JU0FD
02:41 PM Not-8b99: [02qtpyvcp] 07traviscibot 0398099bc - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
02:44 PM Lcvette: hurray
02:44 PM Lcvette: yes zoom was inverse
02:45 PM Lcvette: ooooh kraken update
02:46 PM Lcvette: :D
02:47 PM TurBoss: ok figured
02:47 PM TurBoss: but I can't find in the menu.yaml where the angle views come from
02:47 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/veCHizOTcyzIWDMiYFtktekQ/message.txt >
02:48 PM TurBoss: comes? it opens a submenu?
02:49 PM Lcvette: :o
02:50 PM Lcvette: TurBoss: you forgot to save these changes
02:50 PM TurBoss: hurray
02:50 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/TlXGoKplWaiejQIvRhWrsLHX/message.txt >
02:50 PM Lcvette: you figured?
02:50 PM TurBoss: yup still un commite
02:51 PM Lcvette: can we make an inverted view of XZ?
02:52 PM TurBoss: yup
02:52 PM Lcvette: where the x arrow faces downward?
02:52 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/RNXITGwwVUQjshtjvnIROQYF/message.txt >
02:52 PM Lcvette: change 1 to -1
02:52 PM Lcvette: ?
02:52 PM TurBoss: how do I name XZ View
02:52 PM Lcvette: XZView
02:52 PM Lcvette: ?
02:52 PM Lcvette: latheview
02:52 PM TurBoss: X side Y front Z top
02:52 PM TurBoss: top view?
02:52 PM Lcvette: latheviewfrontpost
02:52 PM Lcvette: latheviewrearpost
02:53 PM TurBoss: lol
02:54 PM Lcvette: what you mean?
02:54 PM Lcvette: lcvette doesn't understand what you need
02:55 PM Lcvette: TurBoss: ^^^
02:55 PM TurBoss: patience
02:55 PM TurBoss: :P
02:56 PM * Lcvette uploaded an image: Screenshot_2020-09-18_15-55-13.png (15KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/zFmROFwpQzpmXoBuugkpdrBs/Screenshot_2020-09-18_15-55-13.png >
02:56 PM Lcvette: this is latheview rear post
02:56 PM Lcvette: * this is lathe view rear post
02:56 PM Lcvette: red arrow down would be lathe view front post
02:56 PM Lcvette: turboss ^^^
02:56 PM Lcvette: this what you need to know?
02:56 PM TurBoss: incoming commit
02:56 PM Lcvette: \o/
02:59 PM Not-8b99: [02probe_basic] 07TurBoss pushed 031 commit to 03master [+0/-0/±3] 13https://git.io/JU0b2
02:59 PM Not-8b99: [02probe_basic] 07TurBoss 03fe706f1 - add menu views to change Plotter settings
02:59 PM Not-8b99: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JU0ba
02:59 PM Not-8b99: [02qtpyvcp] 07TurBoss 03f683876 - add XZ view to settings
03:00 PM TurBoss: I have added a "Temporal menu" to set the views
03:00 PM Not-8b99: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JU0bo
03:00 PM Not-8b99: [02probe_basic] 07traviscibot 0324dc5bf - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:00 PM Not-8b99: [02probe_basic] 07Lcvette created branch 03master 13https://git.io/JU0bK
03:00 PM TurBoss: it will be nuked if needed
03:00 PM Not-8b99: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+523/-0/±0] 13https://git.io/JU0bP
03:00 PM Not-8b99: [02qtpyvcp] 07traviscibot 03ec965c0 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
03:00 PM TurBoss: from the yml we can set the default view and hide the menu
03:01 PM Not-8b99: [02probe_basic] 07Lcvette created branch 03master 13https://git.io/JU0bK
03:02 PM Not-8b99: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JU0b1
03:02 PM Not-8b99: [02probe_basic] 07traviscibot 039861bef - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:03 PM Not-8b99: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JU0bS
03:03 PM Not-8b99: [02probe_basic] 07traviscibot 03f7a94ba - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:05 PM CaptHindsight: TurBoss: https://github.com/kcjengr/qtpyvcp.additive-manufacturing/blob/master/qtpyvcp_additive_manufacturing/svg_slicer/svg_slicer.py line #23 SvgSlicer will display layers according to `u32` and `s32` HAL pin values.
03:05 PM TurBoss: ops typo
03:06 PM TurBoss: no negative layers right?
03:06 PM CaptHindsight: if we rely on the position of the HAL pin values then we need a way to interrupt this to perform other operations between layers
03:07 PM CaptHindsight: this was Andy approach but he did not fully understand how these printers need to operate
03:08 PM TurBoss: what are the the other operations?
03:08 PM CaptHindsight: this is why I need to write up a spec so we all know what we need to create here vs follow what Andy had an idea to do
03:08 PM TurBoss: did you skecth something?
03:08 PM TurBoss: cool
03:08 PM CaptHindsight: TurBoss: any possible lines of G-code
03:09 PM TurBoss: what operations does?
03:09 PM TurBoss: * what operations do?
03:09 PM TurBoss: :-)
03:09 PM CaptHindsight: anything can happen during the display of SVG layers or in between layers
03:10 PM CaptHindsight: the Z position should not dictate what is displayed
03:10 PM TurBoss: programable "area")
03:10 PM Lcvette: TurBoss: for the @Slot names can thy be different?
03:10 PM TurBoss: * programable "area" in gcode
03:10 PM TurBoss: Lcvette: why?
03:11 PM TurBoss: much breakage
03:11 PM CaptHindsight: G-code should tell the controller which layer and how long it should be displayed
03:11 PM Lcvette: was thinking to make slot for setViewFP and setViewRP
03:11 PM Lcvette: so could flip it in the plotter
03:11 PM Lcvette: for front or rear post lathes
03:11 PM CaptHindsight: the displayed time for each layer may not even be the same amount of time for each layer
03:11 PM TurBoss: make XZ2
03:12 PM TurBoss: CaptHindsight: ahhh
03:12 PM Lcvette: ok
03:12 PM TurBoss: we can use eval expresions in gcode
03:12 PM CaptHindsight: the layer might be displayed for 2 seconds and then go blank while the printer does something else like move a y axis or move a wiper motors or whatever else may be imagines
03:12 PM TurBoss: it will cahnge the layer with a line of gcode
03:12 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/afWvHoXlxIjUaCILouuFyoIT/message.txt >
03:12 PM Lcvette: like this>?
03:13 PM Joco[m]: <Lcvette "the time savings alone are worth"> yup - that was the conclusion I came to and paid my $$. However give FreeCAD another couple of years and I think it could be worth the time investment. Once you get over some of the niggles you can start to make progress. But the Paths workbench needs a couple of years of baking to really be a reaplcement for Fusion's CAM.
03:13 PM TurBoss: Lcvette:
03:13 PM TurBoss: ```python
03:13 PM TurBoss: self.camera.SetPosition(0, -self.position_mult, 0)
03:14 PM Joco[m]: <TurBoss "OpenSCAD"> I did a lot of programming in OpenSCAD when first learning about 3D Printing, must be about 5-6 years ago now. Maybe more.
03:14 PM TurBoss: I'm not gona pay for Autodesk's ConFusion
03:14 PM TurBoss: haha
03:15 PM TurBoss: <Joco[m] "I did a lot of programming in Op"> Nice!
03:18 PM Joco[m]: <TurBoss "I'm not gona pay for Autodesk's "> I'm doing it cose I'm able to affords it, I'm feeling old and time is short, buy the time this deal is out FeeCAD should be a viable replacement.
03:18 PM TurBoss: in cam no
03:19 PM Joco[m]: <TurBoss "in cam no"> I'm giving FreeCAD 3 years to sort its self out. I would hope in that time its CAM would be a LOT better
03:19 PM TurBoss: great
03:20 PM Joco[m]: I bout the 3 yr Fusion license deal. basically $33/month incl taxes. I can save that just on reducing beer consumption. Which is probably a health benefit as well. And if I pick up a few odd jobs using the mill then that all helps as well.
03:23 PM TurBoss: great!
03:25 PM Lcvette: TurBoss: the - thing make the z axis flip not the x axis
03:25 PM Lcvette: /o\
03:25 PM TurBoss: hmmmm
03:28 PM Lcvette: i figured
03:28 PM Lcvette: \o/
03:28 PM TurBoss: Great!
03:28 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/XTNcqhAFxbGsOvHAlXGtoUYF/message.txt >
03:28 PM Lcvette: -1 and -self
03:31 PM Lcvette: pushed
03:34 PM Not-8b99: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±2] 13https://git.io/JU0NH
03:34 PM Not-8b99: [02probe_basic] 07Lcvette 03588cc2d - added front and rear post view to lathe plotter
03:34 PM Lcvette: TurBoss: hazzy go catch up your kraken
03:35 PM Not-8b99: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JU0N5
03:35 PM Not-8b99: [02probe_basic] 07traviscibot 035842778 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:36 PM TurBoss: Lcvette: did you push correctly?
03:36 PM Lcvette: :o
03:36 PM TurBoss: ah thoose are qtpyvcp changes to the plot
03:36 PM Lcvette: doubtful
03:36 PM TurBoss: great great
03:37 PM Lcvette: i did both qtpyvcp and probe basic
03:37 PM Lcvette: should be updates on both
03:37 PM Lcvette: qtpy is the vtk and probe basic is the ui
03:37 PM TurBoss: ahhhh
03:37 PM TurBoss: i don't have Lcvette on my kraken scope
03:38 PM Not-8b99: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JU0Nb
03:38 PM Not-8b99: [02qtpyvcp] 07Lcvette 038f051e5 - add front and rear lathe post view to plotter
03:38 PM TurBoss: \ø/
03:38 PM TurBoss: * \o/
03:39 PM Lcvette: you found?
03:39 PM * Lcvette uploaded an image: Screenshot_2020-09-18_16-39-11.png (31KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/xRYVhjQDFDCxrhXxHiYofouL/Screenshot_2020-09-18_16-39-11.png >
03:39 PM Lcvette: :(
03:40 PM Lcvette: TurBoss: ^^^
03:40 PM Lcvette: catch up!
03:40 PM Not-8b99: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+523/-0/±0] 13https://git.io/JU0Ae
03:40 PM Not-8b99: [02qtpyvcp] 07traviscibot 03ec5d7c5 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
03:41 PM Not-8b99: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JU0Av
03:41 PM Not-8b99: [02qtpyvcp] 07TurBoss 03dcb4285 - XZ2 view add it to the settings
03:41 PM Not-8b99: [02probe_basic] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JU0AT
03:41 PM Not-8b99: [02probe_basic] 07TurBoss 03d1f349b - add XZ2 View to the views menu
03:42 PM TurBoss: |ø/(
03:42 PM Not-8b99: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+523/-0/±0] 13https://git.io/JU0AL
03:42 PM Not-8b99: [02qtpyvcp] 07traviscibot 0312c3d25 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
03:43 PM Not-8b99: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JU0Am
03:43 PM Not-8b99: [02probe_basic] 07traviscibot 0349763c1 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:44 PM Lcvette: :o
03:44 PM Lcvette: what you added?
03:44 PM Lcvette: in yaml?
03:44 PM TurBoss: https://git.io/JU0Av https://git.io/JU0AT
03:45 PM * Lcvette posted a file: lathe view.mkv (463KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/AmwYalSYFCJjSosRClJsmUFZ/lathe view.mkv >
03:45 PM Lcvette: how do i insert video like you do?
03:45 PM Lcvette: lcvette only knows how to upload files
03:45 PM TurBoss: i use webm
03:45 PM TurBoss: with peek the app
03:46 PM * TurBoss uploaded an image: Captura de pantalla de 2020-09-18 22-45-52.png (59KiB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/LKaKSkREbegpOFOylMkYmLnC/Captura de pantalla de 2020-09-18 22-45-52.png >
03:49 PM Lcvette: sudo apt install webm
03:49 PM Lcvette: ?
03:49 PM Lcvette: sudo apt install peek
03:49 PM Lcvette: ?
03:49 PM TurBoss: apt install peek
03:49 PM Lcvette: no sudo?
03:49 PM TurBoss: yes sudo
03:50 PM Lcvette: no orky
03:50 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/ZgDUKongowAlXFCvBFmMdDwr/message.txt >
03:50 PM TurBoss: its a bit woky to install then
03:50 PM TurBoss: you need to add a new kind of package manager called flatpak
03:51 PM TurBoss: the install from there
03:51 PM TurBoss: very easy
03:51 PM Lcvette: :o
03:51 PM Lcvette: /o\
03:51 PM Lcvette: better just stick with simple screen recorder
03:51 PM Lcvette: lol
03:52 PM Lcvette: i dunno about package manager
03:52 PM TurBoss: very easy
03:52 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/HnBRFAngYTHKNgndmIoGjQXR/message.txt >
03:52 PM TurBoss: flatpak
03:53 PM Lcvette: \o/
03:53 PM TurBoss: then run
03:53 PM TurBoss: ```bash
03:53 PM TurBoss: flatpak install flathub com.uploadedlobster.peek
03:53 PM Lcvette: error
03:53 PM TurBoss: another way to get software in linus
03:53 PM Lcvette: ```
03:53 PM Lcvette: chris@chris:~$ flatpak install flathub com.uploadedlobster.peek
03:53 PM Lcvette: error: Remote "flathub" not found
03:53 PM TurBoss: its not deb files
03:54 PM TurBoss: https://flatpak.org/setup/Debian/
03:54 PM TurBoss: sudo apt install gnome-software-plugin-flatpak
03:54 PM Lcvette: flatpak installed
03:54 PM Lcvette: sudo apt install flatpak
03:54 PM TurBoss: sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
03:54 PM TurBoss:
03:56 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/oNfkioxFsnzBNCpcVpNwepUL/message.txt >
03:56 PM Lcvette: error
03:56 PM TurBoss: ```
03:56 PM TurBoss: flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
03:56 PM TurBoss: :/
03:57 PM Lcvette: \o/
03:57 PM Lcvette: ok restarting
03:57 PM Lcvette: brb
03:57 PM TurBoss: cool
03:57 PM Not-8b99: [02probe_basic] 07Lcvette created branch 03master 13https://git.io/JU0A1
03:59 PM Not-8b99: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JU0Ay
03:59 PM Not-8b99: [02probe_basic] 07traviscibot 03b1c3ed6 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
04:04 PM Lcvette: ok, restarted
04:06 PM TurBoss: ok now in the apps menu a Gnome Software launcher should apear
04:07 PM * TurBoss uploaded an image: Captura de pantalla de 2020-09-18 23-06-24.png (21KiB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/YLVKDyGfEyGlbcqyIXnlTuVv/Captura de pantalla de 2020-09-18 23-06-24.png >
04:10 PM Lcvette: TurBoss: no
04:10 PM Lcvette: :(
04:10 PM TurBoss: settings?
04:10 PM Lcvette: don't see it
04:11 PM Lcvette: nope
04:11 PM TurBoss: ```
04:11 PM TurBoss: sudo apt install gnome-software-plugin-flatpak
04:11 PM TurBoss:
04:12 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/qdJtwSRkESVGtpwstcwCGBZm/message.txt >
04:12 PM Lcvette: seems it is installed correctly
04:12 PM TurBoss: type alt + F2
04:13 PM TurBoss: the issue "gnome-software"
04:13 PM Lcvette: yes
04:13 PM Lcvette: that worked
04:13 PM Lcvette: says lets go shoipping
04:14 PM TurBoss: cool search for peek
04:16 PM Lcvette: installing peek
04:16 PM Lcvette: \o/
04:16 PM Lcvette: this is more like windows
04:16 PM Lcvette: lcvette could have had windows like installation years ago?
04:16 PM Lcvette: wtf
04:16 PM Lcvette: :O
04:17 PM TurBoss: 😲
04:17 PM Lcvette: /o\
04:17 PM Lcvette: what other cool things doesn't lcvette know
04:17 PM TurBoss: there are many many
04:17 PM TurBoss: :P
04:18 PM TurBoss: stuff like syncthing
04:18 PM TurBoss: its tricky to setup but works nice to sync folders across computers
04:20 PM * Lcvette uploaded a video: Peek 2020-09-18 17-19.webm (36KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/iWoHWCpzGkMqUvExtZPPMUyj/Peek 2020-09-18 17-19.webm >
04:20 PM Lcvette: :D
04:20 PM Lcvette: \ol/
04:20 PM Lcvette: glorious victory!!
04:20 PM TurBoss: |ø/
04:31 PM Joco[m]: looking pretty swish
04:59 PM Joco[m]: right ... enough lazing in bed. Up to have breakfast and make chips. :-)
04:59 PM Joco[m]: got some polley-v pulleys to make.
06:06 PM Lcvette: TurBoss: time for a release update to the installer?
06:57 PM * hazzy-m doesn't have a fever PC anyone :(
06:58 PM JT-Cave: hazzy-m, ???
06:58 PM hazzy-m: My co-worker asked where his desktop was so I had to give it back lol
06:58 PM hazzy-m: Fever = Dev lol
06:58 PM JT-Cave: lol
07:04 PM CaptHindsight: hazzy-m: have you tried QTPYVCP on the Rpi4 yet?
07:04 PM JT-Cave: CaptHindsight, have you tried QtPyVCP on a Rpi4 yet?
07:06 PM CaptHindsight: will likely build in QEMU
07:07 PM CaptHindsight: I only have an Rpi4 with 2GB of RAM
07:33 PM hazzy-m: CaptHindsight: no I haven't, but at least a couy people have it working
07:34 PM hazzy-m: I think Scott Ford? on the forum has it working
07:34 PM hazzy-m: I have a Rpi with 4gb ram, just haven't had time to play with it
07:35 PM * hazzy-m goes to dig out a new dev PC
07:37 PM * hazzy-m uploaded an image: ima_52f8722.jpeg (354KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/hQAuqMOCTEgeLvXNhXcHuZin/ima_52f8722.jpeg >
07:38 PM hazzy-m: Somewhere behind the oscopes there is a PC, just have to uncover it lol
07:44 PM CaptHindsight: hazzy-m: thanks I'll check the forums
07:46 PM CaptHindsight: https://forum.linuxcnc.org/media/kunena/attachments/24854/VTKonRPi.PNG
07:49 PM CaptHindsight: https://forum.linuxcnc.org/qtpyvcp/39127-vtk-backplot-on-rpi-4?start=20#none
10:28 PM Joco[m]: Any suggestions on a good seal for a coolant splash guard on a machine? I'll show a couple of pics for where I need to seal ....
10:29 PM * Joco[m] uploaded an image: ima_585f83c.jpeg (236KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/DERqKvlYvCaiPnImJYNeuaGt/ima_585f83c.jpeg >
10:29 PM * Joco[m] uploaded an image: ima_0b85639.jpeg (233KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/GjoHYIicNAjagimVgjmdCSuz/ima_0b85639.jpeg >
10:30 PM Joco[m]: pic #1 is of the guard and #2 shows the gap it slots into. However coolant fills up the slot then over flows under the guard. I need to put a gasket type material in it. the gap once the guard is in the slot is about 1.2 to 1.5mm total.
10:40 PM Joco[m]: Been thinking something like this could be an option: https://www.supercheapauto.co.nz/p/permatex-permatex-aviation-form-a-gasket-sealant-liquid-no.-3----118ml/541363.html#q=permatex&lang=en_NZ&start=30