#hazzy Logs

Jun 18 2020

01:28 PM Lcvette: /o\
01:32 PM Lcvette: lcvette needs halp trying to setup the tool change position
01:32 PM Lcvette: thing
01:32 PM Lcvette: i think it is all setup corret;y
01:32 PM Lcvette: but it is not sending out a 1 for checked state or a 0 for unchecked state
01:32 PM Lcvette: i made the following checkbox
01:32 PM * Lcvette uploaded an image: Screenshot_2020-06-18_14-20-22.png (53KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/VIwQlDTFGTkiRcJhDoxGSWmw >
01:32 PM Lcvette: i made the settings in the yaml file
01:32 PM Lcvette: oh maybe i need something in the py file?>
02:29 PM Lcvette: ok got everything working except if there is a vcpsettingsbutton
02:39 PM Lcvette: turboss are you through with your duel and blender design?
02:39 PM TurBoss: Importante back
02:40 PM TurBoss: Lol
02:40 PM Lcvette: :o
02:41 PM Not-944e: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±9] 13https://git.io/JfF8R
02:41 PM Not-944e: [02probe_basic] 07Lcvette 03b025e39 - ui and subroutine work
02:42 PM Not-944e: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JfF8a
02:42 PM Not-944e: [02probe_basic] 07traviscibot 03f5325ce - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
02:42 PM TurBoss: test
02:43 PM Lcvette: you need me to test?
02:43 PM Lcvette: sure
02:43 PM TurBoss: testing tablet
02:43 PM Lcvette: :o
02:43 PM Lcvette: what test is needed?
02:44 PM TurBoss: de de need to fix the offset bug
02:44 PM Lcvette: turboss is talking jibberish
02:44 PM Lcvette: lol
02:44 PM Lcvette: whose de de
02:44 PM Lcvette: /o\
02:45 PM TurBoss: wose wose
02:45 PM Lcvette: yes we need the offset bug fixed so i can continue working on the tool setter stuff so we can connect the graphics
02:45 PM Lcvette: :D
02:45 PM Lcvette: \o/
02:45 PM Lcvette: who is dee?
02:46 PM Lcvette: * who is de de?
02:46 PM TurBoss: this keyboard helper isntnhelping so much
02:46 PM Lcvette: what keyboard helper?
02:46 PM Lcvette: pad?
02:46 PM Lcvette: fr wrists?
02:46 PM Lcvette: * for wrists?
02:46 PM TurBoss: the un the tablet
02:46 PM TurBoss: lol
02:47 PM Lcvette: /o\
02:47 PM Lcvette: usb keyboard for tablet?
02:47 PM Lcvette: not at dev?
02:48 PM TurBoss: soon
02:48 PM TurBoss: making some food
02:50 PM Lcvette: Nam Nam nam
02:54 PM Joco[m]1: Friday! Thank goodness.
02:55 PM Lcvette: \o/
02:55 PM Lcvette: still Thursday here
02:56 PM Joco[m]1: Had my first real. Cnc part error yesterday. Vice shifted. Out with the mig. Plugged the bad cut, remachined and perfectly serviceable.
02:57 PM Lcvette: great!
02:58 PM Joco[m]1: Not something you would probably do for a customer. But since the part is for me all good.
03:03 PM TurBoss: good
03:05 PM Lcvette: TurBoss: is the issue in base_cannon.py?
03:05 PM TurBoss: not sure
03:05 PM TurBoss: vtk_backplot
03:07 PM TurBoss: Lcvette: Ii'm at dev \o/
03:08 PM Lcvette: hurray! \o/ :D
03:08 PM Lcvette: glorious victory awaits!
03:08 PM TurBoss: -o`
03:08 PM Lcvette: lcvette went through and ssrched everything that had the word tool in the vtk files and i don't know what im looking at
03:08 PM Lcvette: `o-
03:10 PM TurBoss: can we trigger the issue with debug messages visible?
03:10 PM Lcvette: maybe
03:10 PM Lcvette: there is no error displayed
03:10 PM Lcvette: i think it is just how things are drawn
03:10 PM Lcvette: maybe if you can debug out the psoitions
03:10 PM Lcvette: for the tool displat tip mayeb that will shed some light on things?
03:11 PM TurBoss: I'll try to replicate in local
03:25 PM Lcvette: maybe im backwards in my interperetation fot he tool offsets
03:25 PM Lcvette: can anyone confirm the x axis lathe tool offset setup in master tool mode?
03:27 PM Lcvette: in G7 diameter mode,if the master tool is at x1.000 and i put tool 2 in and touch and the dro reads x2.000, is that a + or - 0.5000" offset?
03:41 PM Lcvette: TurBoss: you find anything
03:41 PM TurBoss: nope
03:44 PM Lcvette: what tells the tool to go to position with a tool offset enabled?
03:44 PM Lcvette: in vtki?
03:47 PM Lcvette: * in vtk?
03:47 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/hePncgniNzvEqukJpVsCgtCV >
03:47 PM TurBoss: line 1676
03:48 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/CdoEPTwrbrUMipRErHzwcLQY >
03:51 PM Lcvette: i should comment it out?
03:51 PM TurBoss: nono
03:52 PM TurBoss: the seccond code i pasted is where the offsets is entered
03:52 PM TurBoss: maybe not the right plac
03:52 PM TurBoss: * maybe not the right place
03:52 PM Lcvette: i don't understanbd
03:52 PM Lcvette: the two pastes are different
03:53 PM Lcvette: 0.0,0.0,0.0
03:53 PM TurBoss: yes
03:53 PM Lcvette: not in second paste
03:53 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/pNtdNLRQUZnDOgYnprjNpwyI >
03:53 PM Lcvette: this is mine
03:53 PM Lcvette: i need to make like yours?
03:53 PM Lcvette: top one?>
03:54 PM TurBoss: ok
03:54 PM Lcvette: * top paste?
03:54 PM TurBoss: no
03:54 PM Lcvette: /o\
03:54 PM TurBoss: its not fixed
03:54 PM Lcvette: ok
03:54 PM Lcvette: you are still working
03:54 PM TurBoss: you asked where is the code
03:54 PM TurBoss: there
03:54 PM TurBoss: :P
03:54 PM Lcvette: ah ok
03:56 PM Lcvette: the two pastes confused me
03:56 PM Lcvette: it looks like it would be correct
03:57 PM TurBoss: yes it applies the offset to the tool
03:57 PM TurBoss: but it gets confused when tool change
03:57 PM Lcvette: x_pos+xoffset
03:57 PM Lcvette: but pos+pos=pos always
03:57 PM Lcvette: and i am getting negative
03:57 PM TurBoss: needs to change=?
03:58 PM Lcvette: the expression shold be correct
03:58 PM Lcvette: so i wondering if something somewhere else is wrong mayb e
03:58 PM Lcvette: ie xpos=2
03:58 PM Lcvette: xoffset=.5
03:58 PM Lcvette: offset x position shold be 2.5
03:58 PM Lcvette: right?
03:58 PM Lcvette: but i get the tool moving to 1.5
03:59 PM Lcvette: and it looks like the dro's read wrong too
04:05 PM Lcvette: I would think they would read positive
04:05 PM TurBoss: any idea why?
04:05 PM Lcvette: I'm absolutely confused
04:06 PM Lcvette: I e been trying to wrap my head around it for 2 days now and cant
04:34 PM Not-944e: [02qtpyvcp] 07TurBoss pushed 031 commit to 03vtk_lathe_fixes [+0/-0/±1] 13https://git.io/JfFEG
04:34 PM Not-944e: [02qtpyvcp] 07TurBoss 03b8f9c62 - fix tool offsets
04:34 PM Not-944e: [02qtpyvcp] 07TurBoss created branch 03vtk_lathe_fixes - 13https://git.io/fhCou
04:35 PM TurBoss: Lcvette: this is up for test!
04:36 PM Lcvette: ok testing
04:37 PM Not-944e: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±2] 13https://git.io/JfFEc
04:37 PM Not-944e: [02probe_basic] 07Lcvette 031363cf4 - fix subroutines
04:39 PM Not-944e: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JfFE0
04:39 PM Not-944e: [02probe_basic] 07traviscibot 0376a895e - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
04:39 PM * Lcvette uploaded an image: Screenshot_2020-06-18_17-29-57.png (3KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/zSKRIbQupiADYZPhVmKIUflx >
04:39 PM TurBoss: its the oposite?
04:40 PM Lcvette: turboss just a note, but as soon as i made this move from 0,0 to 1,1 the ryellow line whent both directions from the origin
04:40 PM Lcvette: this was one move that drew two lines
04:41 PM TurBoss: brb
04:41 PM Lcvette: yes it is opposite
04:41 PM Lcvette: i think
04:42 PM Lcvette: yes is opposite
04:43 PM Lcvette: i think
04:43 PM Lcvette: yes
04:44 PM Lcvette: if i swap the tool offsets to negatives then the tool makes sense and dro's make sense for what should be positive offsets
04:46 PM Lcvette: andrewbeck: maybe you can help us out if you are around
04:46 PM Lcvette: need to know which direction tool offsets are supposed to move a lathe tool
05:02 PM Lcvette: TurBoss: i played with where youchanged it but im not havign much luck
05:02 PM Lcvette: it appears the tool is now in the correct position but the trace lines are not
05:02 PM Lcvette: yellow lines
05:02 PM Lcvette: and it looks like the dro's are reporting backwards from what i would expect
05:02 PM TurBoss: ok
05:03 PM TurBoss: I'm trying on my side
05:03 PM TurBoss: ?
05:03 PM TurBoss: the tool is okay?
05:03 PM Lcvette: what controls the tool dro's
05:03 PM Lcvette: it appears to be
05:03 PM TurBoss: maybe the subs....? :)
05:04 PM * Lcvette uploaded an image: Screenshot_2020-06-18_17-54-52.png (47KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/twCjeqayKENxaoxDmgbmGWmB >
05:04 PM Lcvette: no im doing it manually in the tool table subs have nothing to do with it
05:04 PM Lcvette: this should be showing G54 X1 Z1 not -1 and _1
05:05 PM TurBoss: ok got another one to try
05:05 PM Lcvette: or g54 x0z0 machine coordinates x1z1
05:05 PM Lcvette: yes the last is correct
05:06 PM Not-944e: [02qtpyvcp] 07TurBoss pushed 031 commit to 03vtk_lathe_fixes [+0/-0/±1] 13https://git.io/JfFug
05:06 PM Not-944e: [02qtpyvcp] 07TurBoss 03c13409d - draw tool offsets correctly
05:06 PM Lcvette: with the tool in this position
05:06 PM Lcvette: shown above
05:06 PM TurBoss: no
05:06 PM TurBoss: so the path is wrong?
05:08 PM Lcvette: this one is much broken
05:08 PM Lcvette: i think maybe the path is also broken
05:08 PM Lcvette: maybe the path was what was broken
05:08 PM Lcvette: and the tool display was correct
05:08 PM Lcvette: /o\
05:08 PM TurBoss: mew
05:08 PM Lcvette: this is soo confusing
05:09 PM TurBoss: :/
05:09 PM Lcvette: i know
05:09 PM Lcvette: but must be fixed
05:09 PM TurBoss: you confusing me
05:09 PM TurBoss: lol
05:09 PM TurBoss: /o\
05:09 PM Lcvette: thats becaus ei am confuised
05:10 PM Lcvette: blind leading the turboss around
05:10 PM Lcvette: lol
05:10 PM TurBoss: :)
05:10 PM TurBoss: 👺
05:10 PM Lcvette: with a tool offset of X0.5 and Z1.00
05:12 PM Lcvette: when the tool is at the origin point it should be reading G54 X0.00 Z0.00 and G53 MCoords should be reading X-1.00 Z-1.00
05:13 PM Lcvette: this is in diameter mode of course
05:13 PM Lcvette: in radius mode G53 X would be X-0.500
05:13 PM Lcvette: but either way this is nt what it is reading or showing
05:14 PM Lcvette: the last one you posted has the tool orientation inverted
05:16 PM TurBoss: ok
05:16 PM TurBoss: only that?
05:16 PM TurBoss: I'll push
05:16 PM Lcvette: only what?
05:16 PM Not-944e: [02qtpyvcp] 07TurBoss pushed 031 commit to 03vtk_lathe_fixes [+0/-0/±1] 13https://git.io/JfFux
05:16 PM Not-944e: [02qtpyvcp] 07TurBoss 030b5407a - fix tool orientation
05:17 PM TurBoss: the tool orientation was upside down
05:17 PM TurBoss: i fixed
05:17 PM Lcvette: ok testing
05:21 PM Lcvette: getting closer i think
05:21 PM Lcvette: but still off
05:21 PM TurBoss: coo
05:21 PM Lcvette: the yellow lines and tool are now working correctly
05:21 PM TurBoss: * cool
05:22 PM TurBoss: they follow same path
05:22 PM TurBoss: i think vtk is ok
05:22 PM Lcvette: but the offsets are inverted
05:22 PM TurBoss: or what?=
05:22 PM TurBoss: does the dro show the same as the plotter does?
05:23 PM * Lcvette uploaded an image: Screenshot_2020-06-18_18-13-32.png (37KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/kLGKOlLlaDoVfApQaiGXNAHH >
05:23 PM Lcvette: i think the dro's in this position should be reading -1.000 -1.000
05:23 PM Lcvette: but they are showing 1.000 and 1.000
05:24 PM Lcvette: becaue the offsets are positive
05:24 PM TurBoss: :/
05:42 PM Lcvette: maybe its correct
05:42 PM Lcvette: im tresting in gmoccapy
05:44 PM * Lcvette uploaded an image: Screenshot_2020-06-18_18-34-44.png (24KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/zEeenhfWjHGcIJZAYMXfYnUK >
05:44 PM Lcvette: this is T1 with no offset
05:45 PM * Lcvette uploaded an image: Screenshot_2020-06-18_18-35-53.png (41KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/CcXkZIgcpQNCHunpeulzjGcc >
05:45 PM Lcvette: this is t2 with x0.500 z1.000 tool offset
05:48 PM Lcvette: TurBoss: it looks the same as gmoccapy now!
05:48 PM TurBoss: amazing!
05:49 PM TurBoss: so its okay?
05:49 PM Lcvette: hurray!!
05:49 PM Lcvette: i think so yes
05:49 PM Lcvette: if gmoccapy is correct then it is the same
05:50 PM * Lcvette uploaded an image: Screenshot_2020-06-18_18-40-32.png (49KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/hoBtPpPXsbirwrJxrnJVeVjT >
05:50 PM TurBoss: Glorious Victory Awaits!
05:50 PM TurBoss: \ø7
05:50 PM * Lcvette uploaded an image: Screenshot_2020-06-18_18-41-12.png (52KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/OEmumfSGtbDKCVOBKFnrvpDS >
05:50 PM Lcvette: they looks same same
05:51 PM Lcvette: both tools have the same offset in gmoccapy and probe basic and both positions look the same and dro's read the same
05:51 PM Lcvette: \o/
05:51 PM TurBoss: I think they only left to be added to 90 0 90 tools
05:51 PM Lcvette: hurray!!
05:51 PM Lcvette: yellow lines and tool match up
05:51 PM Lcvette: \o/
05:51 PM Lcvette: i think we are there!
05:51 PM Lcvette: :D]
05:51 PM TurBoss: \o/\/
05:51 PM TurBoss: * \o/\/o/
05:51 PM Lcvette: o/ \o
05:52 PM TurBoss: 🍻
05:52 PM Lcvette: :D
05:52 PM Lcvette: ok
05:52 PM Lcvette: so
05:52 PM Lcvette: thats fixed
05:52 PM TurBoss: can you please test 90 90 tools?
05:52 PM Lcvette: yes
05:52 PM TurBoss: maybe they dont have any offset
05:53 PM TurBoss: now I'm only applying offsets to cone tools
05:54 PM Lcvette: no offsets
05:54 PM Lcvette: :(
05:54 PM Lcvette: /o\
05:54 PM TurBoss: cone / triangle
05:54 PM TurBoss: :/
05:54 PM Lcvette: on 90 90 tools
05:55 PM Lcvette: no offset gets applied
05:55 PM TurBoss: ok
05:55 PM TurBoss: thats fine
05:55 PM Lcvette: or broken offset
05:55 PM Lcvette: is inverted like beforere
05:55 PM TurBoss: nono
05:56 PM * Lcvette uploaded an image: Screenshot_2020-06-18_18-46-47.png (50KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ZrWXfbGqUsbWcRtvSEzknkZp >
05:57 PM Lcvette: tool should be at origin here
05:57 PM Lcvette: G540,0
05:57 PM TurBoss: I know the fix ... I thnk...
05:57 PM Lcvette: hurray!
06:02 PM hazzy-m1: hello
06:03 PM Lcvette: o/
06:03 PM JT-Cave: yo
06:03 PM * hazzy-m1 uploaded a video: dros exp.mp4 (154KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/YViXnRurnAooaTPNuirNHKYr >
06:03 PM hazzy-m1: norbert: Hello!
06:03 PM hazzy-m1: welcome
06:04 PM hazzy-m1: Lcvette: playing with axis variables in the line edits
06:04 PM Lcvette: hazzy: thats fantastic!!
06:04 PM Lcvette: \o/
06:04 PM Lcvette: turboss and i are with vtk stuff in probe basic lathe
06:04 PM hazzy-m1: sweet
06:05 PM Lcvette: think we got it licked finally
06:05 PM Lcvette: then just some tweak to the touch off page for graphics and connect a few things and we are good to go!
06:05 PM Lcvette: hazzy: is there a VCPSettingsButton?
06:05 PM hazzy-m1: fantabulous
06:05 PM Lcvette: i saw checkbox, and some other things but not button
06:05 PM hazzy-m1: Lcvette: no there is not, should there be one?
06:05 PM Lcvette: i think so
06:06 PM Lcvette: would be nice to remember certain button settings
06:06 PM Lcvette: have certain things turned on at start up
06:06 PM hazzy-m1: I'm thinking about making settings support enums as well, then they can be driven by a combobox with options
06:06 PM Lcvette: nice
06:06 PM Lcvette: i dunno what enums are
06:06 PM Lcvette: /o\
06:06 PM hazzy-m1: for example the would be good for selecting the lathe X axis DRO diameter setting
06:07 PM JT-Cave: enumeration
06:07 PM hazzy-m1: got to run, bbl
06:07 PM Lcvette: i dunno what enumeration is
06:07 PM Lcvette: /o\
06:07 PM Lcvette: lol
06:07 PM JT-Cave: long hot day here... got the roof on the run
06:07 PM JT-Cave: https://docs.python.org/3/library/enum.html
06:08 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/BobRAYaVgNCdEAHMPxMSCuXl >
06:08 PM * JT-Cave has the Rpi plugged into that monitor...
06:09 PM Lcvette: nice
06:10 PM JT-Cave: tomorrow gotta clean the shop out and make a run to McCoys... can't freaking walk in there for all the scrap
06:10 PM Lcvette: whats mccoys
06:11 PM JT-Cave: started making some parts for the 1800's machine conversion
06:11 PM JT-Cave: McCoys scrap yard
06:11 PM JT-Cave: https://www.mccoysscrapprocessing.com/
06:33 PM Joco[m]1: Man you guys have been busy. Lots of messages to catch up on
06:37 PM hazzy-m1: Joco: Morning
06:38 PM Joco[m]1: Hi ya
06:39 PM Joco[m]1: hazzy: got the MDI History tweaks done. Only part need to solve for now is best way to load the exported gcode from the mdi history into gcode editor
06:41 PM Joco[m]1: I think I should be able to do it with a signal out of MDI History that is linked in designer to a slot in gcode editor.
06:42 PM Joco[m]1: Actually .... the pattern for file loading should be the answer. To simpl
06:43 PM Joco[m]1: * Actually .... the pattern for file loading should be the answer. To simple
07:07 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JfFaP
07:07 PM Not-944e: [02qtpyvcp] 07KurtJacobson 03e7f41d4 - DOC: Status Items - Update interpreter settings
07:08 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+519/-0/±0] 13https://git.io/JfFa1
07:08 PM Not-944e: [02qtpyvcp] 07traviscibot 038796464 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
07:11 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JfFay
07:11 PM Not-944e: [02qtpyvcp] 07KurtJacobson 0394782fb - fix typo
07:12 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+519/-0/±0] 13https://git.io/JfFa5
07:12 PM Not-944e: [02qtpyvcp] 07traviscibot 03952f2e1 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
07:14 PM Lcvette: What's all that hazzy? Tyne new dro calculation stuff?
07:14 PM hazzy-m1: no
07:14 PM hazzy-m1: just doc updates
07:15 PM hazzy-m1: you can read the commit messages `DOC: Status Items - Update interpreter settings`
07:23 PM Lcvette: L don't know your shorthand
07:23 PM Lcvette: Lol
07:23 PM Lcvette: Or half the stuff you write
07:24 PM TurBoss: hello Joco
07:24 PM TurBoss: @hazz thanks for fixing the setup.py lol
07:24 PM TurBoss: I allways forgot
07:24 PM Lcvette: /o\
07:25 PM TurBoss: Lcvette: I'm with th e90 90 tools offsets
07:25 PM TurBoss: * Lcvette: I'm with the 90 90 tools offsets
07:25 PM Lcvette: Ok
07:25 PM Lcvette: How can i help.
07:27 PM TurBoss: I'll push in a while
07:27 PM TurBoss: I can test locall
07:27 PM TurBoss: * I can test local
07:28 PM Lcvette: Ok
07:29 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 02-19-34.png (4KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/KlhKltorVaaqGoRscokRKMPN >
07:29 PM TurBoss: looks okish
07:30 PM TurBoss: 😕 not sure really
07:30 PM hazzy-m1: TurBoss: your welcome!
07:33 PM TurBoss: 🤟
07:34 PM Lcvette: You did it.
07:35 PM Lcvette: Do tool offset .5x 1.0z
07:35 PM Lcvette: Should loom like images above
07:35 PM Lcvette: That my new bench mark
07:36 PM Lcvette: * Should look like images above
07:36 PM Lcvette: * Thats my new bench mark
07:42 PM Joco[m]1: TurBoss: hi yah. Just balancing work meetings,
07:42 PM TurBoss: great 😁 you bussines man! 🙂
07:45 PM Not-944e: [02qtpyvcp] 07TurBoss pushed 031 commit to 03vtk_lathe_fixes [+0/-0/±1] 13https://git.io/JfFVP
07:45 PM Not-944e: [02qtpyvcp] 07TurBoss 0353c5f14 - add tool offsets for 90 90 tools
07:46 PM Lcvette: Turboss Is done?
07:46 PM Lcvette: \o/
07:47 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03calculator_plugin [+1/-0/±3] 13https://git.io/JfFVD
07:48 PM Not-944e: [02qtpyvcp] 07KurtJacobson 03591e24f - WIP: calculator plugin
07:48 PM Not-944e: [02qtpyvcp] 07KurtJacobson created branch 03calculator_plugin - 13https://git.io/fhCou
07:48 PM TurBoss: 1 2 3 4 90 90 tools
07:49 PM travis-ci: kcjengr/qtpyvcp#1623 (calculator_plugin - 591e24f : Kurt Jacobson): The build passed.
07:49 PM travis-ci: Diff view : https://github.com/kcjengr/qtpyvcp/commit/591e24f44f48
07:49 PM travis-ci: Build details : https://travis-ci.org/kcjengr/qtpyvcp/builds/699918514
07:50 PM * Joco[m]1 uploaded an image: ima_e80ce8b.jpeg (296KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/FbqJvoFJWreAfiCbFHLVvgdv >
07:50 PM Joco[m]1: Mild steel parts cnc’s on the BF20
07:51 PM TurBoss: cool
07:51 PM Joco[m]1: Made the wee thnig work.
07:51 PM Joco[m]1: These will become toolmaker vice clamps
07:52 PM TurBoss: \ø/ hurray!
07:52 PM Joco[m]1: 25mm square bar
07:53 PM Joco[m]1: 10mm hardended dowel pins to be pressed/glued into the holes at the end.
07:56 PM * Joco[m]1 uploaded an image: ima_ca1d3cf.jpeg (30KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/FqLEENkdylkslSvPWIokkQiT >
07:57 PM Joco[m]1: This is a good example of what I am making
07:57 PM Joco[m]1: For that exact vise
07:59 PM TurBoss: 😍
07:59 PM Lcvette: Nice
08:07 PM Joco[m]1: I’m having fun and learning alot about what my wee machine can cope with in steel
08:09 PM hazzy-m1: Joco: nice!
08:10 PM hazzy-m1: better than sticking a couple dowel pins in and using a washer to clamp it down
08:11 PM Joco[m]1: Lol - yeah. I decided I could make something less “number 8 wire” like and learn in the process
08:15 PM Joco[m]1: Got some really nice recipes for a number of drill sizes and for roughing out with a roughing endmill.
08:21 PM TurBoss: Lcvette: did you found something on the Q1 Q2 Q3 Q4 with 90 90 tools?
08:22 PM Lcvette: No, checking now
08:22 PM TurBoss: ok
08:24 PM * TurBoss uploaded an image: 20200619_031447.jpg (2121KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/ibsTLPvXcpjJXFYPqZKMaMWx >
08:24 PM Lcvette: x is wrong
08:25 PM TurBoss: in wich Q?
08:25 PM Lcvette: and Q3 and 4 are making wierd tools
08:26 PM * Lcvette uploaded an image: Screenshot_2020-06-18_21-16-51.png (62KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/gPMgurjKtsutCQfRkteMQvSS >
08:27 PM Lcvette: Q1 x is inverted
08:27 PM Lcvette: Q2 x and z are inverted
08:27 PM Lcvette: q3 and q4 the tool drawn is incorrect, can't tell whats wrong
08:27 PM TurBoss: ok
08:28 PM TurBoss: do you have the code open?
08:28 PM TurBoss: vtk_backplot.py
08:28 PM Lcvette: i do now
08:28 PM TurBoss: line 1443
08:28 PM TurBoss: just rezed the api branch lol
08:29 PM Lcvette: rezed?
08:29 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/zjvXGKaGZvSmsKVmwDXRlbYB >
08:29 PM TurBoss: this is for the 4 point recatangle in Q1
08:29 PM TurBoss: the picture i posted
08:31 PM Lcvette: whats that for?
08:31 PM TurBoss: it sets the offstes to the tool
08:31 PM TurBoss: in XZ for each point
08:31 PM TurBoss: first line point 1
08:31 PM TurBoss: line 2 point 2
08:31 PM Lcvette: -0.05 need a comma?
08:32 PM Lcvette: ```
08:32 PM Lcvette: points.InsertNextPoint((tool.xoffset + 0.5, 0.0, -0.05, - tool.zoffset))
08:32 PM Lcvette: points.InsertNextPoint((tool.xoffset, 0.0, -0.05, - tool.zoffset))
08:32 PM Lcvette: like this?
08:32 PM Lcvette: ^^^
08:33 PM TurBoss: nono is a opration betwen -0.05 and - tool.zoffset
08:33 PM Lcvette: ok
08:34 PM TurBoss: makes any sense ?
08:34 PM Lcvette: No
08:34 PM Lcvette: Lol
08:35 PM TurBoss: ok
08:35 PM TurBoss: lol
08:35 PM Lcvette: What each one do?
08:35 PM TurBoss: for Q1 90 90
08:35 PM Lcvette: Oh ok so just for 1 orientation
08:36 PM TurBoss: yes
08:36 PM TurBoss: thoose 4 lines for only if Q1 and 90 90
08:36 PM TurBoss: it will draw a rectangle
08:38 PM Lcvette: Ok
08:38 PM Lcvette: I am beginning to see
08:43 PM TurBoss: there is no spoon
08:44 PM Lcvette: Lol
08:44 PM Lcvette: Matrix
08:44 PM TurBoss: :)
08:44 PM Lcvette: :D
08:44 PM TurBoss: so say something?
08:44 PM TurBoss: saw
08:44 PM Lcvette: I'm trying to imagine what's happening there
08:44 PM TurBoss: * so saw something?
08:44 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/psFFUGxwVwWOsYJGePlXcOPy >
08:45 PM TurBoss: ```
08:45 PM TurBoss: points.InsertNextPoint((tool.xoffset + 0.5, 0.0, -0.05, - tool.zoffset))
08:45 PM TurBoss: points.InserNexPoint(( X, Y , Z)
08:45 PM TurBoss: * points.InserNexPoint(( X, Y , Z))
08:45 PM Lcvette: Can you spell out each position in the line?
08:46 PM Lcvette: Top left, top right, Bottom left, botto right
08:46 PM TurBoss: yes
08:46 PM TurBoss: but 1º 2º 3º 4º
08:47 PM TurBoss: on the first line the X of the point athe the tool origin is "tool.xoffset + 0.0"
08:47 PM Lcvette: 4 lines = 4 points
08:47 PM TurBoss: yes
08:48 PM Lcvette: Or o which line is which
08:48 PM Lcvette: * which line is which
08:48 PM TurBoss: first line is the point at the tool origin
08:49 PM TurBoss: second line is tool x offset + 0.5 because tool width
08:50 PM Lcvette: So they're is xyz in each line
08:50 PM TurBoss: yes
08:50 PM Lcvette: But we're make y 0.0
08:50 PM TurBoss: (X, Y, Z)
08:50 PM Lcvette: AMD only isee xz
08:50 PM TurBoss: we leave the second parameter Y as 0.0
08:50 PM TurBoss: (X, 0.0, Z)
08:52 PM Lcvette: Do were needed to make the offsets minus?
08:52 PM Lcvette: Doesn't the part do that itself?
08:52 PM TurBoss: not sure
08:52 PM TurBoss: thats the isssue
08:52 PM Lcvette: * Doesn't the offset do that itself?
08:53 PM TurBoss: for the tool offset no
08:53 PM TurBoss: it does for the path offsets
08:53 PM TurBoss: :/
08:53 PM Lcvette: That's not the tool table offset being pulled in?
08:54 PM TurBoss: nono
08:54 PM TurBoss: its ok
08:54 PM Lcvette: Tool.zoffset
08:54 PM TurBoss: its the tool table
08:54 PM TurBoss: 😲
08:54 PM Lcvette: Eureka?
08:54 PM TurBoss: the problem is the offsets
08:55 PM TurBoss: positive or negative
08:55 PM TurBoss: for Q1 Q2 Q3Q4
08:55 PM Lcvette: I think they should all be positive
08:55 PM TurBoss: ok
08:55 PM Lcvette: Except the width
08:55 PM TurBoss: I can try that
08:55 PM Not-944e: [02qtpyvcp] 07joco-nz opened pull request 03#41: ENH: Mdi history enhance2 - 13https://git.io/JfFoJ
08:56 PM Lcvette: And then the tool.xzoffsets will be brought in from the tool table either pos or neg to reflect the tools location
08:58 PM TurBoss: so will be a sum allways?
08:58 PM TurBoss: brb
08:59 PM Joco[m]1: lol - much happier now. Back to 2 open pull requests. :-p
09:01 PM Lcvette: ok so be clear the tool.xoffset is from the tool table:?
09:01 PM Lcvette: * ok so be clear the tool.xoffset and tool.zoffset is from the tool table:?
09:07 PM TurBoss: yes
09:07 PM TurBoss: the are
09:09 PM Lcvette: ok, i have the tools showing like normal again
09:09 PM Lcvette: but the offset is reversed
09:09 PM TurBoss: ok
09:09 PM Lcvette: i changed all offsets to additions
09:09 PM TurBoss: wich tool in wich direction
09:09 PM TurBoss: ok
09:09 PM TurBoss: great
09:09 PM Lcvette: all tools
09:10 PM Lcvette: all tools are offset incorrectly fo z
09:10 PM Lcvette: working on one offset at a time
09:10 PM Lcvette: easier to track changes
09:10 PM * Lcvette uploaded an image: Screenshot_2020-06-18_22-01-19.png (57KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/oEhlEDNwvxECKPlerbsRWsMA >
09:11 PM Lcvette: so the tool should be on the left side of the origin 1"
09:11 PM Lcvette: mirrored on the red arrow
09:11 PM Lcvette: z-1.000
09:12 PM Lcvette: but it shows as Z1.000
09:12 PM Lcvette: so how to change that?
09:12 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/iLGqruhbXDTmPgItKIZRbrSa >
09:12 PM * Lcvette uploaded an image: Screenshot_2020-06-18_22-03-29.png (2KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/nVrrjDJcSWsaMlKpeLhcYkfV >
09:13 PM TurBoss: this works fine for tool 14
09:13 PM TurBoss: its tooltip is bottomright
09:13 PM Lcvette: my tool tips are all correct
09:13 PM Lcvette: it the atual tools position that is wrong
09:14 PM Lcvette: its inverse like before
09:14 PM Lcvette: should be at the end of the yellow line
09:15 PM Lcvette: TurBoss: ^^^
09:15 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 04-06-15.png (4KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/lAkGezndruGqKPsAOohjtNAt >
09:15 PM TurBoss: this is for T14
09:16 PM Lcvette: whats the offset?
09:16 PM TurBoss: 0?
09:17 PM Lcvette: /o\
09:17 PM * Lcvette uploaded an image: Screenshot_2020-06-18_22-08-20.png (5KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ktGhZMIRFWnOoCtLWiqBVloe >
09:17 PM Lcvette: this is my tool14 with 0 offset
09:18 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 04-08-55.png (3KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/GTtuCzNpcBcQTydgdSwZnAIL >
09:18 PM TurBoss: /o\
09:18 PM Lcvette: what else detemrines the tools position
09:18 PM TurBoss: nothing more
09:18 PM Lcvette: this was the same issue we had with the cones
09:18 PM Lcvette: how did you solve that?
09:19 PM TurBoss: by figuring the right positive negative
09:19 PM Lcvette: oh
09:19 PM Lcvette: i better test them with negative offsets then
09:20 PM TurBoss: only negatives for Q1 Q4
09:20 PM TurBoss: X negatives
09:20 PM Joco[m]1: i started putting set screws in the unused holes on the fixture plate. Crap there are a lot of holes
09:21 PM TurBoss: 🙂
09:22 PM Joco[m]1: thought I would be "good" and trying and stop the holes from becoming bunged up with crap
09:27 PM Joco[m]1: <TurBoss "🙂"> 320 odd the evil little buggers
09:28 PM TurBoss: wow
09:29 PM Joco[m]1: yeah. M6 and M10
09:29 PM Joco[m]1: mostly M6
09:36 PM Lcvette: ok I have Q4 working
09:36 PM Joco[m]1: a glorious win?
09:36 PM TurBoss: bravo!
09:40 PM Lcvette: got Q3 working
09:40 PM Lcvette: formatting was incorrect
09:40 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/cHpQihtxYXfCQqTWQLZQsnpT >
09:40 PM TurBoss: great!
09:40 PM Lcvette: turboss ^^^
09:40 PM TurBoss: thanks!
09:40 PM Lcvette: tool.zoffset needed to be first like x
09:40 PM TurBoss: nice!
09:41 PM TurBoss: ohhhh
09:41 PM TurBoss: okay
09:46 PM * hazzy-m1 uploaded a video: dros exp.mp4 (154KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/poSfgZcYuySaxkhiNQjDIVNx >
09:46 PM hazzy-m1: active gcodes widget
09:47 PM * hazzy-m1 uploaded a video: gcodes.mp4 (306KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/TvwnSpTbJCxApHCZEVCYebQG >
09:47 PM Joco[m]1: ?
09:47 PM Joco[m]1: ah
09:47 PM TurBoss: Wow!
09:47 PM * hazzy-m1 uploaded the wrong video at first
09:47 PM TurBoss: bravo!!!
09:48 PM TurBoss: 🥳
09:48 PM Joco[m]1: nicer than just a string
09:48 PM hazzy-m1: yep
09:48 PM hazzy-m1: I thinking about having a dialog with gcode usage info that can be popped up for each gcode
09:48 PM Lcvette: hurray hazzy! looks awesome!
09:49 PM Joco[m]1: I'm getting to the point I might need to do a rebuild of my UI. Running out of space in the static spaces. Loosing too much to nav bars
09:49 PM Lcvette: probe basiuc
09:49 PM Lcvette: * probe basic
09:49 PM Joco[m]1: especially of want to use this type of nice stuff
09:49 PM Lcvette: :o
09:49 PM hazzy-m1: Lcvette: I'm exhausted from my tip so had to make something fun and easy lol
09:50 PM hazzy-m1: * Lcvette: I'm exhausted from my trip so had to make something fun and easy lol
09:50 PM Joco[m]1: lol - you sounding a dealer lol - PB ... you know you want it, its just too good ....
09:50 PM Lcvette: yay
09:50 PM Lcvette: lcvette is going crozzeyed from expressions
09:51 PM hazzy-m1: lol
09:52 PM TurBoss: <TurBoss "20200619_031447.jpg"> hazzy: I was playing with the opcua stuff :P
09:53 PM TurBoss: also builbot builds qtpyvcp-dev installers
09:53 PM TurBoss: need to finish the releases
09:53 PM TurBoss: then probebasic installer-dev then releases
09:53 PM Lcvette: turboss, show me the Q2
09:54 PM Lcvette: i changed it and need to go back to see it
09:54 PM TurBoss: the code?
09:54 PM Lcvette: yeah the 4 lines
09:55 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/hmiHmKpHfaYMsVIjGkJSMmTz >
09:56 PM hazzy-m1: TurBoss: whoa!!
09:56 PM hazzy-m1: Thats awesome
09:56 PM TurBoss: its the submodule causing much throuble?
09:56 PM TurBoss: did you notice anything?
09:58 PM hazzy-m1: we have a customer that keeps asking how to use OPC UA to link their folders to an ERP dashboard, i keep putting them off since I don't know how lol
09:58 PM hazzy-m1: I will tell them about that Java SDK
09:58 PM hazzy-m1: TurBoss: no, it seems ok, unless I it gets out of data on a branch
09:59 PM hazzy-m1: why is a sub-module required?
09:59 PM TurBoss: wich erp?
09:59 PM TurBoss: navision?=
09:59 PM Lcvette: i have them all working except Q2
10:00 PM Lcvette: its not drawing a rectangle but a thin triangle
10:00 PM Lcvette: /o\
10:00 PM TurBoss: hazzy: the installer was a standalone repo but i needed it later for the buildbot
10:00 PM hazzy-m1: I'm not sure which ERP, they have a lost of custom software they use
10:00 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/RgRSCEOEigsuddFdlQTgfRfI >
10:00 PM TurBoss: so did a submodule
10:00 PM Lcvette: turboss can you figure this one?
10:00 PM TurBoss: I think is silent enough
10:01 PM hazzy-m1: yeah, seems fine
10:01 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/fgVKnQTZEVCDUcLhaCpqZUgk >
10:01 PM TurBoss: lol
10:02 PM Lcvette: that would put it in the wrong place
10:02 PM TurBoss: once did a python script that intorrogated the memory of a omron plc the inserted it on a sql server
10:02 PM TurBoss: the the erp readed that
10:03 PM TurBoss: * once did a python script that intorrogated the memory of a omron plc the inserted it on a sql server via udp socket
10:03 PM TurBoss: * latter the the erp readed that
10:03 PM TurBoss: oh ok
10:03 PM TurBoss: Q2 is bottom right
10:04 PM Lcvette: yes
10:04 PM TurBoss: <TurBoss "once did a python script that in"> @hazzy, this for erp integration ^^
10:04 PM Lcvette: the tool.xzoffsets need to be negative for the tool to show correct location in the polotter for the specified offset
10:04 PM TurBoss: ok
10:09 PM TurBoss: Lcvette: did you figure?
10:09 PM Lcvette: no
10:09 PM Lcvette: took amoke break
10:09 PM Lcvette: back on it now
10:09 PM TurBoss: ☹︎
10:09 PM TurBoss: cool
10:12 PM Lcvette: 1-4 which points
10:13 PM Lcvette: 1=origin
10:13 PM Lcvette: 2=?
10:13 PM Lcvette: 3=?
10:13 PM Lcvette: 4=?
10:13 PM TurBoss: left or bottom
10:13 PM TurBoss: for 2
10:13 PM TurBoss: sorry
10:14 PM Lcvette: for 2
10:14 PM TurBoss: for right or bottom
10:14 PM TurBoss: seems bottom right
10:15 PM Lcvette: i fixed
10:15 PM Lcvette: /o\
10:15 PM TurBoss: \ø/
10:15 PM Lcvette: i accidentally changed the front angle to 91
10:15 PM Lcvette: lol
10:16 PM TurBoss: :O
10:16 PM TurBoss: so 1 3 4 ar okey?
10:16 PM Lcvette: 1,2,3,4 all good now!
10:16 PM Lcvette: \o/
10:17 PM TurBoss: bravo!!!!!
10:17 PM TurBoss: commit and push lol
10:18 PM hazzy-m1: TurBoss: nice! I need to learn more about ERP systems
10:19 PM Lcvette: tool 9
10:19 PM Lcvette: is wrong
10:19 PM Lcvette: all others work
10:19 PM Lcvette: tool 9 has no z offset change
10:20 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03active_gcodes_widget [+1/-0/±1] 13https://git.io/JfF6Z
10:20 PM Not-944e: [02qtpyvcp] 07KurtJacobson 03520a5a9 - initial gcode reference widget
10:20 PM Not-944e: [02qtpyvcp] 07KurtJacobson created branch 03active_gcodes_widget - 13https://git.io/fhCou
10:20 PM Not-944e: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±3] 13https://git.io/JfF6C
10:20 PM Not-944e: [02probe_basic] 07Lcvette 03c4c59b9 - fixed vtk 90 90 tool offsets
10:20 PM Lcvette: i pushed though
10:20 PM Lcvette: now to fix the tool 9 offset
10:21 PM TurBoss: you need to commit to the branch on qtpyvcp
10:21 PM TurBoss: vtk_lathe_fixes
10:21 PM travis-ci: kcjengr/qtpyvcp#1625 (active_gcodes_widget - 520a5a9 : Kurt Jacobson): The build passed.
10:21 PM travis-ci: Diff view : https://github.com/kcjengr/qtpyvcp/commit/520a5a9e0f6c
10:21 PM travis-ci: Build details : https://travis-ci.org/kcjengr/qtpyvcp/builds/699943394
10:21 PM Not-944e: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JfF68
10:21 PM Not-944e: [02probe_basic] 07traviscibot 03d8f493c - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
10:22 PM Lcvette: done
10:22 PM TurBoss: <hazzy-m1 "TurBoss: nice! I need to learn m"> or maybe dont lol
10:22 PM Lcvette: no it errored
10:22 PM Lcvette: denied
10:22 PM Lcvette: /o\
10:22 PM Lcvette: turboss ^^^
10:23 PM Lcvette: i set upstream to origin
10:23 PM Lcvette: it pushed that way
10:23 PM Lcvette: is that ok?
10:23 PM TurBoss: but not on probebasic repo
10:23 PM TurBoss: in qtpyvcp
10:24 PM Lcvette: i did
10:24 PM TurBoss: you are in vtk_lathe_fixes branch right?
10:24 PM Lcvette: check it
10:24 PM TurBoss: great!
10:24 PM TurBoss: fantabulous
10:24 PM Lcvette: but tool 9 offset need something
10:24 PM TurBoss: ok
10:24 PM Lcvette: it doesn't move with a tool offset set
10:24 PM TurBoss: now i have the same tooltable
10:24 PM Lcvette: just stays at origine
10:25 PM Lcvette: hurray!
10:25 PM Lcvette: * just stays at origin
10:25 PM TurBoss: is good?
10:26 PM Lcvette: read my posts!
10:26 PM Lcvette: Q9 is brokjen
10:26 PM TurBoss: ok
10:26 PM Lcvette: * Q9 is broken
10:26 PM Lcvette: * Q9 is broken
10:26 PM TurBoss: ok
10:26 PM Lcvette: lol
10:27 PM TurBoss: Q9 for all doesn't matter if 9090 or not
10:27 PM TurBoss: found
10:27 PM Lcvette: no
10:27 PM TurBoss: line 1563
10:27 PM Lcvette: but it needs to move to its offset position
10:27 PM TurBoss: it needs to apply the offsets
10:27 PM TurBoss: correct
10:27 PM Lcvette: correct
10:28 PM Lcvette: needs tool.xoffset tool.zoffset things i think
10:28 PM TurBoss: yes!
10:28 PM TurBoss: the same stuff
10:28 PM Lcvette: but it has a radius thing so i dunno
10:29 PM TurBoss: yes...
10:29 PM TurBoss: its diferent
10:35 PM TurBoss: Lcvette: how is goin?
10:37 PM Lcvette: i duno how to implement
10:37 PM Lcvette: there is a radius thing in it
10:37 PM Lcvette: turboss ^^^
10:37 PM Lcvette: can you show me one line?
10:38 PM Lcvette: or how to lay out the stuff
10:38 PM Lcvette: then i can tweak if needed
10:38 PM TurBoss: -radious
10:38 PM TurBoss: is left top corner
10:38 PM TurBoss: here we use the tool diameter
10:39 PM TurBoss: so is just tool.diameter/2
10:39 PM Lcvette: yes
10:39 PM Lcvette: i just need a formatted line to see hwo to do
10:39 PM Lcvette: whats what
10:39 PM Lcvette: there is only radius ,0.0,0.0
10:39 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/iKLGnnuTAzfkPVfGljNmjtch >
10:40 PM Lcvette: so what about xyz?
10:40 PM Lcvette: only two other things
10:40 PM Lcvette: ok
10:40 PM Lcvette: i see
10:40 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/oXjkakiPPTbAsFTapISNkyyc >
10:40 PM Lcvette: radius replaces x
10:41 PM TurBoss: yes
10:41 PM TurBoss: in the other Q 1234 we had 0.5 0.05 fixed values
10:41 PM TurBoss: here we take the radius
10:41 PM TurBoss: same effect
10:42 PM Lcvette: and use a fixed z length
10:42 PM TurBoss: 1.0 yes
10:42 PM Lcvette: 1.0 + toolzoffset
10:42 PM TurBoss: yes!
10:43 PM TurBoss: 🎖︎
10:44 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/PTHgquLbTJgIkyeRqfUDMJep >
10:44 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/WDcPIzyhUIrzKWtLHPnZxqjK >
10:45 PM TurBoss: you can also change the " [ ] " with parentesis " ( ) "
10:48 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/xMdpyttGweakLcddfTUkEvFd >
10:48 PM Lcvette: woprks!
10:48 PM Lcvette: \o/
10:48 PM TurBoss: fantastic
10:48 PM Lcvette: hurray!
10:48 PM Lcvette: :D
10:48 PM TurBoss: thanks
10:48 PM Lcvette: glorious victory!
10:48 PM TurBoss: it started to begin a mess
10:49 PM Lcvette: I am panda!
10:49 PM TurBoss: 🐲
10:49 PM Lcvette: :D
10:49 PM Lcvette: `o-
10:49 PM Lcvette: engarde dragin
10:49 PM TurBoss: ⚔︎
10:49 PM Lcvette: * engarde dragon
10:49 PM Lcvette: :d
10:49 PM Lcvette: lol
10:50 PM Lcvette: pushed
10:50 PM * TurBoss uploaded an image: image.png (97KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/ZSZmJUUdRBHUiUsWhNUwWxfc >
10:50 PM Lcvette: all offsets should be working now
10:50 PM Lcvette: lol
10:50 PM TurBoss: le Lcvette
10:51 PM Lcvette: hahahaha
10:51 PM TurBoss: ok
10:51 PM Lcvette: merge?
10:51 PM TurBoss: ready to merge?
10:51 PM TurBoss: whats left
10:51 PM Lcvette: yes its all tested and working
10:51 PM Lcvette: nothing in vtk
10:51 PM Lcvette: onto qml stuff now
10:52 PM Lcvette: i ahve the tool touch stuff working, just need to connect the moving pieces
10:52 PM TurBoss: ok the I'll merge
10:52 PM Lcvette: \o/
10:52 PM TurBoss: * ok then I'll merge
10:52 PM Not-944e: [02qtpyvcp] 07TurBoss pushed 032 commits to 03vtk_lathe_fixes [+0/-0/±2] 13https://git.io/JfFil
10:52 PM Not-944e: [02qtpyvcp] 07Lcvette 0397bf3ae - fixed 90 90 tool offsets in vtk
10:52 PM Not-944e: [02qtpyvcp] 07Lcvette 037383085 - fixed q9 tool offsets
10:53 PM TurBoss: Lcvette: just pushed tthe merge to my fork
10:53 PM TurBoss: testing
10:53 PM Lcvette: great!
10:54 PM Lcvette: smokle break
10:54 PM Lcvette: victory ciggy\
10:54 PM Lcvette: * victory ciggy
10:54 PM TurBoss: 🚬
10:55 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 05-46-03.png (10KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/vpoDGBDnwjWsHCMEfEfXyvxp >
10:55 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 05-45-54.png (35KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/ygOeoZGOVIfcSUqalocktzwL >
10:55 PM TurBoss: is this correct?
10:56 PM TurBoss: it seems
10:57 PM TurBoss: is Q9
10:57 PM TurBoss: lol
11:00 PM Lcvette: no
11:00 PM Lcvette: you have some work opffsets in lace it looks like
11:00 PM TurBoss: oh ok
11:01 PM Lcvette: i can't see your dro's
11:01 PM Lcvette: how about your offset table?
11:01 PM Lcvette: clear those out
11:02 PM TurBoss: fine
11:02 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 05-52-41.png (2KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/qVqErxTZXswyVRemvWhGQWoc >
11:02 PM TurBoss: thanks
11:02 PM TurBoss: ok goin to push to master
11:02 PM * Lcvette uploaded an image: Screenshot_2020-06-18_23-53-06.png (45KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/IqftipHDGbuMdIOrNtvMToIy >
11:03 PM Not-944e: [02qtpyvcp] 07TurBoss pushed 037 commits to 03master [+0/-0/±7] 13https://git.io/JfFio
11:03 PM Not-944e: [02qtpyvcp] 07TurBoss 03d66dc9b - Merge branch 'vtk_lathe_fixes'
11:05 PM Not-944e: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+519/-0/±0] 13https://git.io/JfFiP
11:05 PM Not-944e: [02qtpyvcp] 07traviscibot 03080b59e - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
11:07 PM Lcvette: for soem reason sometimes it takes hitting the t#m6 button twize for everything to update
11:08 PM Lcvette: but seems only if you do tool 0
11:08 PM TurBoss: 😐️
11:08 PM Lcvette: it is working great here
11:09 PM TurBoss: so what do you hev for the tool touch off
11:11 PM Lcvette: so the orientation icon buttons need to be connected to the current tools Q value
11:11 PM Lcvette: not sure how to access the tool table information for that
11:11 PM Lcvette: and the qml associated tool should also move
11:12 PM TurBoss: let me see
11:12 PM * Lcvette uploaded an image: Screenshot_2020-06-19_00-03-20.png (159KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/sNSbfLjDaEIyMzxhuqVpQAer >
11:13 PM * Lcvette uploaded an image: Screenshot_2020-06-19_00-04-27.png (162KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/FlUNuckQbZfmzlMbCQfaChwe >
11:13 PM Lcvette: like so
11:14 PM Lcvette: the first picture is tool 1 whcih is Q2
11:14 PM TurBoss: cool
11:14 PM Lcvette: so the orientation icon button for Q2 is checked
11:15 PM Lcvette: for the second picture tool 3 is the current tool and the Q1 button is highlighted and the tool for Q1 is shown activated
11:15 PM Lcvette: should be connected like this
11:15 PM Lcvette: but i don't know how
11:15 PM Lcvette: i was thinking maybe a rule for the orientation buttons
11:16 PM Lcvette: but how to pull the Q vlaue from the tool for the current tool selected by M6
11:16 PM Lcvette: did i explain it correctly?
11:18 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 06-09-27.png (14KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/zCxYKHDDmDquetSRUZVfvaPr >
11:19 PM TurBoss: something went wrong lol
11:20 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 06-11-09.png (84KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/LrRfwmblrVVBSUeMPptvOHtp >
11:21 PM Lcvette: ?
11:21 PM Lcvette: no no nothing is connected yet
11:21 PM Lcvette: all needs connecting
11:22 PM Lcvette: i was manually clicking things to show what should happen when a tool is loaded
11:22 PM TurBoss: the rule does
11:22 PM TurBoss: that
11:22 PM TurBoss: <TurBoss "Captura de pantalla de 2020-06-1"> ^^
11:22 PM TurBoss: for Q1
11:23 PM Lcvette: you put the rule in?
11:23 PM TurBoss: the selected Q1
11:23 PM TurBoss: see the blue dots arround Q1
11:23 PM Lcvette: yes
11:24 PM TurBoss: I can add
11:24 PM * Lcvette uploaded an image: Screenshot_2020-06-19_00-15-34.png (35KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/cunWAXxxSJqKEfsECyCKOJrN >
11:25 PM Lcvette: ok you added the rules
11:25 PM Lcvette: \o/
11:30 PM Lcvette: TurBoss: are you on the latest probe absic?
11:31 PM TurBoss: yes
11:31 PM Lcvette: and the button is still wrong?
11:32 PM * Lcvette uploaded an image: image.png (13KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/crsDpWmRZJdMDbREEzsFaItG >
11:32 PM Lcvette: this is old
11:36 PM TurBoss: yes
11:36 PM TurBoss: i saw
11:36 PM * TurBoss uploaded a video: Peek 19-06-2020 06-26.mp4 (212KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/HKitjKNaihsWkGiKhOLQGkfR >
11:36 PM Lcvette: turboss, try running qompile.
11:37 PM TurBoss: ok
11:37 PM Lcvette: * turboss, try running qcompile.
11:37 PM TurBoss: that fixed
11:37 PM Lcvette: \o/
11:37 PM * Lcvette uploaded an image: Screenshot_2020-06-19_00-28-16.png (19KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/YtoDoXdKDUfuAULzIXjboIEQ >
11:37 PM * TurBoss uploaded an image: Captura de pantalla de 2020-06-19 06-28-23.png (19KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/DBIeVFLMSXqdocTSSezoDEeh >
11:37 PM Lcvette: this si the new version
11:38 PM Lcvette: hurray!
11:38 PM TurBoss: I add the rules?
11:38 PM Lcvette: that looks awesome!!!
11:38 PM Lcvette: yes
11:38 PM Lcvette: add the rules
11:38 PM Lcvette: then we need t connect the qml
11:47 PM TurBoss: Lcvette: I pushed
11:47 PM TurBoss: to pb
11:47 PM Lcvette: ok testing
11:47 PM Lcvette: \o/
11:47 PM Lcvette: hurray
11:47 PM Lcvette: we are slaying it tonight!
11:48 PM Not-944e: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JfFP4
11:48 PM Not-944e: [02probe_basic] 07TurBoss 035e306ba - add rules for Touch off orientation buttons
11:48 PM TurBoss: \o/
11:49 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/cTPtFSkIBbbRlCYndasZhKfD >
11:49 PM Lcvette: error loading
11:49 PM Lcvette: TurBoss: ^^^
11:49 PM Lcvette: /o\
11:49 PM Not-944e: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JfFPu
11:49 PM Not-944e: [02probe_basic] 07traviscibot 033d6c425 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
11:51 PM TurBoss: 😕
11:52 PM Lcvette: i undid and it opens fine
11:52 PM Lcvette: so maybe something wrong with your commit
11:53 PM TurBoss: found
11:53 PM TurBoss: stupid designer
11:53 PM TurBoss: xD
11:53 PM Not-944e: [02probe_basic] 07Lcvette created branch 03master 13https://git.io/JfFPg
11:53 PM Lcvette: :o
11:54 PM Not-944e: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+118/-0/±0] 13https://git.io/JfFPw
11:54 PM Not-944e: [02probe_basic] 07traviscibot 03457b198 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
11:58 PM TurBoss: got the fix
11:58 PM TurBoss: I'm pushing
11:59 PM Not-944e: [02probe_basic] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JfFPP
11:59 PM Lcvette: hurray
11:59 PM Lcvette: what was it?
11:59 PM Not-944e: [02probe_basic] 07TurBoss 03d095819 - use qtpyvcp widgets