#hazzy Logs

Mar 08 2020

04:43 AM Hendrik[m]: Lcvette: these values are set in my INI for the spindle
04:44 AM Hendrik[m]: https://github.com/HendrikRoth/hildegard/blob/master/hildegard.ini#L17
09:14 AM Lcvette: hendrik that is wierd, it should be working as it is working here on the sim
09:17 AM Lcvette: Hendrik: did you test the new touch routine hendrik?
09:17 AM Lcvette: also if you have the old tool table, you ned to delete it and let linuxcnc create a new one
09:50 AM hazzy-m: morning
10:00 AM Hendrik[m]: Lcvette: I am now at the router
10:03 AM Lcvette: Morning
10:03 AM Hendrik[m]: tool touch position is 0 0 0 😢
10:04 AM Lcvette: ?
10:04 AM Hendrik[m]: And all offsets are gone
10:04 AM Hendrik[m]: hmm
10:05 AM Lcvette: What did you do?
10:07 AM Hendrik[m]: hm dont know but i had an image lying arround so i was able to set the settings like yesterday
10:07 AM Lcvette: Did you fork?
10:08 AM Lcvette: Maybe reset things
10:12 AM Hendrik[m]: no just loaded my updated config.. no idea..
10:12 AM Hendrik[m]: i tested the new touch off version
10:12 AM Hendrik[m]: i measured tool 1 and 2, than i have set a new zero
10:12 AM Hendrik[m]: going to zero works fine for both
10:13 AM Hendrik[m]: loaded tool 3 and clicked touch off.. this "worked", but has the wrong value for the z offset
10:15 AM Hendrik[m]: sounds like the issue from yesterday in a little optimized way
10:16 AM Hendrik[m]: @Lcvette
10:18 AM Lcvette: Paste your tool.tbl file here
10:20 AM Lcvette: Hendrik: ^^^
10:20 AM * Hendrik[m] posted a file: tool.tbl (0KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/uUViIqXndNeryfcNDHVciHbr >
10:21 AM * Hendrik[m] sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/iVKuEoZCmWSesFrIrTyFtBSb >
10:28 AM Hendrik[m]: @Lcvette
10:28 AM Lcvette: testing now
10:32 AM Lcvette: yes im getting an issue also
10:35 AM Hendrik[m]: ok "fine" 🙂
10:39 AM Lcvette: ok now i am not getting the error anymore
10:39 AM Lcvette: but im probing in a work offset with no offsets
10:40 AM Lcvette: i only get an error if probing in a work offset that has an offset defined
10:45 AM Hendrik[m]: yepp
10:46 AM Hendrik[m]: same here
10:48 AM Lcvette: that should not be the case as probing shjould be only recording machine soordinates
10:48 AM Lcvette: its wierd
10:48 AM Lcvette: trying to find a way to resolve
10:49 AM Hendrik[m]: thank u 🙂
10:49 AM Hendrik[m]: otherwise this is working exactly how i was looking for
10:52 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/OqmaEWETTzMpbObngSxxRPOu >
10:53 AM Lcvette: wonder if we should be using this instead og G10 L1
10:53 AM Hendrik[m]: yepp sounds so
10:54 AM Lcvette: and then G53.9 would remain a zeroed work offset
10:54 AM Lcvette: then it would always be correct regardless of what work offsets are set and what values they have
10:54 AM Lcvette: ok testing
10:54 AM Hendrik[m]: perfect
10:58 AM Lcvette: hmmm.. im having a wierd thing when selecting g59.3
10:58 AM Hendrik[m]: a little other question.. i remapped m6 and added prolog=change_prolog.. but i get the error: "pycall(remap.change_prolog) failed".. do i have to set the python folder in my ini file for the stdglue.py file?
11:00 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/UpouKDrkMzZIbsgTfeJLuthp >
11:01 AM Lcvette: Hendrik: ^^ you mean this?
11:01 AM Hendrik[m]: ah ok
11:01 AM Lcvette: the ./python should direct it to the python file in your config folder
11:02 AM Hendrik[m]: i copied the python folder from the probe_basic example
11:02 AM Lcvette: * the ./python should direct it to the python folder in your config folder
11:02 AM Lcvette: should still be in the config
11:02 AM Lcvette: this is just telling it where to find those files
11:03 AM Hendrik[m]: it isnt set in your example ini
11:03 AM Lcvette: this is from the atc_sim
11:03 AM Lcvette: which has the remap
11:03 AM Lcvette: it is in the atc_sim which uses the remap
11:04 AM Lcvette: probe basic sim does not use the remap or have the atc functional
11:04 AM Hendrik[m]: ah ok..
11:04 AM Hendrik[m]: just building a remap for the 3d probe tool
11:05 AM Lcvette: have to go for a bit
11:05 AM Lcvette: will try this again in a while
11:08 AM Hendrik[m]: ok 🙂
11:26 AM Hendrik[m]: ok the toolchange works here with the 3d probe, but i am missing the dialog box at the moment and don't find docs how to get the default dialog box back/where it is normally opened.
11:34 AM Lcvette: What dialog?
11:41 AM Hendrik[m]: "please insert tool XY..." [OK]
11:42 AM Hendrik[m]: 'cause i am manually changing tools without any magazine at the moment
11:48 AM Hendrik[m]: https://github.com/HendrikRoth/hildegard/blob/master/subroutines/manual_tool_change.ngc
11:50 AM Hendrik[m]: https://youtu.be/_t-WAfaZCXY