#hazzy Logs
Feb 10 2020
#hazzy Calendar
02:02 AM CaptHindsight: is this the current howto install? https://www.qtpyvcp.com/install/quick_start.html
02:03 AM CaptHindsight: for Debian Stretch
02:04 AM CaptHindsight: https://www.qtpyvcp.com/install/basic_usage.html the sim configurations did not get copied to the ~/linuxcnc directory
02:06 AM CaptHindsight: also :Note: If there are no VCPs listed, most likely you did not run setup.py per the installation instructions." but the earlier instaructions do not include any mention of running setup.py
02:06 AM CaptHindsight: I'll be happy to fix the install howto as soon as I get this installed :)
02:43 AM TurBoss: CaptHindsight: thanks!
02:44 AM TurBoss: there are a lot of ways to install qtpyvcp
02:44 AM TurBoss: if you only plan to use it then use the pip installl
02:44 AM CaptHindsight: was trying to follow that install, are there others?
02:44 AM TurBoss: if you want to develop you may need the git clone install
02:45 AM CaptHindsight: qtpyvcp installed but I don't see the sims in any directory
02:45 AM CaptHindsight: I'd like to just try it for now
02:45 AM CaptHindsight: need to make some custom guis
02:45 AM TurBoss: pip doen't install examples is a down side...
02:46 AM CaptHindsight: ah hah
02:46 AM TurBoss: give me a sek
02:46 AM CaptHindsight: I'll be happy to read any other docs
02:47 AM TurBoss: https://www.qtpyvcp.com/install/installation.html
02:47 AM TurBoss: this is full dev install
02:47 AM TurBoss: deb install is not well tested
02:47 AM CaptHindsight: was just skimming through that doc
02:48 AM TurBoss: https://www.qtpyvcp.com/install/installation.html#getting-the-qtpyvcp-source-code
02:48 AM TurBoss: git clone https://github.com/kcjengr/qtpyvcp
02:48 AM TurBoss: cd qtpyvcp pip install -e --upgrade .
02:49 AM TurBoss: * cd qtpyvcp && pip install -e --upgrade .
02:50 AM CaptHindsight: ok will try that later today and report back sir
02:50 AM TurBoss: thank you so much!
02:50 AM TurBoss: you are wellcome!
02:51 AM TurBoss: anyway if you installed from pip you can turn any ini to rum qtpyvcp if you set the DISPLAY VAR from ini to qtpyvcp
02:53 AM CaptHindsight: thanks
07:46 AM Lcvette: :o
07:46 AM Lcvette: You removed Mike?
08:02 AM TurBoss: hey
08:02 AM TurBoss: no
08:02 AM Lcvette: :o
08:03 AM Lcvette: o/
08:03 AM TurBoss: invite works only for riot users
08:03 AM TurBoss: not emails
08:03 AM TurBoss: o/
08:03 AM Lcvette: oh
08:03 AM Lcvette: but he came here and said hello
08:03 AM Lcvette: he is a riot user
08:03 AM TurBoss: from irc?
08:03 AM Lcvette: no\
08:04 AM Lcvette: i invited him direct from his emai;
08:04 AM Lcvette: email he is a riote user and his email is also tired to his riot account
08:04 AM Lcvette: * email he is a riot user and his email is also tied to his riot account
08:05 AM Lcvette: * he is a riot user and his email is also tied to his riot account
08:05 AM Lcvette: and it worked
08:05 AM Lcvette: he got the invite and came here and said hello
08:05 AM TurBoss: did he join=?
08:05 AM Lcvette: yes
08:06 AM TurBoss: then invite was never accepted
08:06 AM Lcvette: his nickname is slakwhere
08:06 AM TurBoss: yeah he is online
08:06 AM TurBoss: at least on the userlist
08:06 AM Lcvette: \o/
08:07 AM TurBoss: o/
08:07 AM Lcvette: \o
08:07 AM TurBoss: anyway i removed the floating invitartion
08:07 AM Lcvette: did you have any epiphony's in your sleep?
08:07 AM TurBoss: * anyway i removed the floating invitation
08:07 AM TurBoss: no
08:08 AM Lcvette: /o\
08:08 AM TurBoss: :)
08:08 AM Lcvette: me either
08:08 AM TurBoss: i saw cmorley post
08:08 AM TurBoss: he said ngc bad python gud
08:08 AM Lcvette: but i did find that article on the queue buster interesting
08:08 AM Lcvette: yes
08:08 AM TurBoss: duno...
08:08 AM Lcvette: ho to make it python?
08:08 AM TurBoss: by rewriting
08:08 AM Lcvette: very hard?
08:08 AM Lcvette: will change everything
08:08 AM TurBoss: yes every thing
08:09 AM Lcvette: will also make it more inaccessble to other users
08:09 AM TurBoss: ☹︎
08:10 AM Lcvette: hmmmm
08:15 AM Lcvette: but if it doesn't get trouble with no backplotter
08:15 AM Lcvette: then what is actually causing the problem?
08:18 AM TurBoss: the backplot invokes gcode.parse function wich returns the result in a number if that number is greater than 3 or gcode.MIN_ERROR fails to load
08:18 AM TurBoss: maybe load doesn't check that
08:18 AM TurBoss: we need our leader
08:18 AM Lcvette: yes lets talk to through'
08:18 AM Lcvette: thats how i find problem
08:19 AM Lcvette: he has left us
08:19 AM Lcvette: :(
08:19 AM TurBoss: :(
08:19 AM Lcvette: he is big wig talkin with germans and swiss
08:19 AM Lcvette: forgets about his riot pals
08:19 AM Lcvette: lol
08:19 AM TurBoss: maybe just rewrite the ofending file
08:19 AM TurBoss: in python
08:20 AM TurBoss: just toolchange
08:20 AM Lcvette: yeah?
08:20 AM TurBoss: the queuebuster
08:20 AM TurBoss: why not
08:20 AM Lcvette: worth a try
08:20 AM Lcvette: but i can't write python
08:20 AM TurBoss: you could
08:20 AM Lcvette: it doesn't make sense to me
08:20 AM Lcvette: i need visual learning
08:20 AM TurBoss: lol
08:21 AM TurBoss: did you code basic?
08:21 AM Lcvette: i need a diagram draw to show me how coding works
08:27 AM Lcvette: once i understand the principle and connections it will then make snese
08:27 AM Lcvette: no
08:27 AM Lcvette: no basic
08:27 AM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/LpIejabkzSsRcjYChrteBYYo >
08:27 AM Lcvette: not since college and then i didn't grasp it well either
08:27 AM Lcvette: thats algebra
08:27 AM Lcvette: i need a diagram explaining whats doing what
08:27 AM TurBoss: then you can understand
08:27 AM Lcvette: to see how the code is working
08:27 AM Lcvette: what each line is doing
08:27 AM TurBoss: anyway the issues is with two tools
08:27 AM TurBoss: why it triggers
08:27 AM Lcvette: yes
08:27 AM TurBoss: you said that it should be asking for tools in tooltable not just the carousel
08:27 AM Lcvette: it would be better if it just asked for them in the tool table
08:27 AM TurBoss: maybe it fixes
08:32 AM * TurBoss has to move
08:33 AM TurBoss: I'll be back latter
08:34 AM Lcvette: ok
10:07 AM dremeier[m]1: btw. if you are just playing around the atc, how about the 24 pocket carousel, If´ve seen the pic of it. so easy to get this?
11:15 AM Lcvette: thats just the gapohic
11:16 AM Lcvette: need to fix one before making another
11:17 AM Lcvette: or else there is alot more to refix as solution is found
11:18 AM Lcvette: better to have one working without glitches and then use as template to make the additonal pocket counts
11:18 AM Lcvette: there is alot of qml coding behind the widget
11:18 AM Lcvette: plus the macros
11:19 AM dremeier[m]1: fully agree, was just my tought :-)
11:20 AM Lcvette: but if it is made to be run on just python and no macros, perhaps we can code on options to pull from the gui for setup?
11:21 AM Lcvette: turboss?
11:21 AM Lcvette: we need reinforcements for turboss
11:21 AM Lcvette: he is bogged down with so many tasks
11:21 AM Lcvette: do you know anyone who does python?
12:15 PM Not-c468: [02probe_basic] 07Lcvette tagged 03db71f8d as 03v0.2.0 13https://git.io/Jvcb9
12:15 PM Not-c468: [02probe_basic] 07Lcvette created tag 03v0.2.0 - 13https://git.io/JeDwL
12:17 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/Jvcbd
12:17 PM Not-c468: [02probe_basic] 07traviscibot 03339ec8d - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
12:17 PM Not-c468: [02probe_basic] 07KurtJacobson published 03v0.2.0 | v0.2.0 - 13https://git.io/JvcbF
12:17 PM travis-ci: kcjengr/probe_basic#277 (v0.2.0 - db71f8d : Chris): The build passed.
12:17 PM travis-ci: Diff view : https://github.com/kcjengr/probe_basic/compare/v0.2.0
12:17 PM travis-ci: Build details : https://travis-ci.org/kcjengr/probe_basic/builds/648531750
12:17 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JvcbN
12:17 PM Not-c468: [02probe_basic] 07Lcvette 03d9239a8 - Fixed M6 G43 buttons and changed to sub calls with proper code order
12:19 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/Jvcbp
12:19 PM Not-c468: [02probe_basic] 07traviscibot 0378a04c8 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
12:31 PM Lcvette: version 2.0 \o/
12:32 PM Lcvette: was something missing in 1.9 that needed a crititcal update
12:34 PM TurBoss: ohhh
12:55 PM TurBoss: Lcvette: where are the changes??
01:07 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+3/-0/±8] 13https://git.io/Jvcxq
01:07 PM Not-c468: [02probe_basic] 07Lcvette 03450d289 - missed ngc file in probe basic subroutine folder
01:07 PM Lcvette: dammit i missed some subroutines
01:07 PM Lcvette: /o\
01:07 PM Lcvette: fixed again
01:07 PM TurBoss: \o/
01:08 PM Lcvette: the tool change for manual tool change and load and store tool
01:08 PM Lcvette: was ahcing some problems
01:08 PM Lcvette: so i made them subcall buttons so i could section the code calls
01:08 PM Lcvette: for removing and restoring tool length offsets
01:08 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvcxC
01:08 PM Not-c468: [02probe_basic] 07traviscibot 0373a7493 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
01:09 PM Lcvette: now when you load a tool it loads the tlo also and when you remove a tool it initiates G49 to remove tlo
01:09 PM Lcvette: was dangerous loading tools with out the offset
01:09 PM Lcvette: i found a learning outlet for python
01:09 PM Lcvette: \o/
01:09 PM Lcvette: its visual and explains things in a way i am starting t understand
01:09 PM TurBoss: some read?
01:10 PM Lcvette: no
01:10 PM Lcvette: video tutorial
01:10 PM TurBoss: ohh
01:10 PM TurBoss: cool
01:10 PM Lcvette: https://www.youtube.com/watch?v=Z1Yd7upQsXY
01:10 PM Lcvette: he explains things slowly and explains what the connections are and how things are working
01:10 PM Lcvette: it is helping me understand what i have been looking at for the last year and a half
01:10 PM Lcvette: lol
01:11 PM TurBoss: great
01:14 PM Not-c468: [02probe_basic] 07Lcvette tagged 03450d289 as 03v0.2.1 13https://git.io/Jvcxy
01:14 PM Not-c468: [02probe_basic] 07Lcvette created tag 03v0.2.1 - 13https://git.io/JeDwL
01:15 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JvcxH
01:15 PM Not-c468: [02probe_basic] 07Lcvette 0348026f5 - update install docs
01:15 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/Jvcxd
01:15 PM Not-c468: [02probe_basic] 07traviscibot 03e841c6b - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
01:15 PM Not-c468: [02probe_basic] 07KurtJacobson published 03v0.2.1 | v0.2.1 - 13https://git.io/Jvcxb
01:16 PM travis-ci: kcjengr/probe_basic#280 (v0.2.1 - 450d289 : Chris): The build passed.
01:16 PM travis-ci: Diff view : https://github.com/kcjengr/probe_basic/compare/v0.2.1
01:16 PM travis-ci: Build details : https://travis-ci.org/kcjengr/probe_basic/builds/648555831
01:16 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvcxA
01:16 PM Not-c468: [02probe_basic] 07traviscibot 03db077ea - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
01:33 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-15/±0] 13https://git.io/JvcpQ
01:33 PM Not-c468: [02probe_basic] 07Lcvette 033c40016 - remove junk files in macro folders
01:34 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/Jvcph
01:34 PM Not-c468: [02probe_basic] 07traviscibot 03dd619fb - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
02:30 PM roguish[m]: Lcvette: is a plasma cut edge in steel machinable? or does it get hardened during the plasma cut?
02:31 PM TurBoss: we use to request our steel cubes begin cut by saw
02:34 PM TurBoss: but maybe its because bending
02:34 PM Lcvette: It's a nasty edge
02:34 PM Lcvette: I would put my tools on it
02:35 PM Lcvette: Wouldn't
02:36 PM JT-Shop: all you need to keep in mind is to cut below the HAZ
02:36 PM Lcvette: It certainly change's the temper of the steel, depending on what type of steel and if a water table is used, it definitely can harden the edge.
02:37 PM Lcvette: That is still gonna beat up endmills
02:37 PM Lcvette: It still has to cut through the hardened surface to get below the haz
02:38 PM JT-Shop: carbide endmills cut hardened steel...
02:39 PM roguish[m]: trying to get some steel plates done within a week or so. thinking plasma or waterjet.
02:39 PM roguish[m]: actually just spoke with a fabricator that can has stock and a waterjet.
02:39 PM roguish[m]: and some time....
02:40 PM roguish[m]: thank you gentlemen...
02:40 PM JT-Shop: yea waterjet is much better for thick plates
02:42 PM Lcvette: lcvettes machine linux machines menu bar is gone
02:42 PM Lcvette: wtf?
02:43 PM Lcvette: the network froze and now the pc does not had the menubar with all the lanch icons, start menu and applications drop down
02:43 PM TurBoss: ops
02:43 PM Lcvette: ?????
02:43 PM Lcvette: i tried restarting and still nothing
02:43 PM Lcvette: any ideas how to fix?
02:43 PM Lcvette: thinkn this network setup is not good
02:44 PM Lcvette: causing some wierd issues
02:44 PM JT-Shop: I think you broke my windblows machine it just went black and started to buzz the speakers
02:45 PM Lcvette: yeah?
02:45 PM Lcvette: i did?
02:45 PM Lcvette: :o
02:45 PM Lcvette: probably
02:45 PM Lcvette: :(
02:45 PM TurBoss: ```
02:45 PM TurBoss: /home/user/.config/xfce4/panel/
02:45 PM Lcvette: how do i launch riot from temrinal
02:46 PM TurBoss: riot-web
02:48 PM Lcvette: chris@cpe-2606-A000-FEC8-3700-0-0-0-7:/$ /home/chris/.config/xfce4/panel/
02:48 PM Lcvette: bash: /home/chris/.config/xfce4/panel/: Is a directory
02:48 PM Lcvette: chris@cpe-2606-A000-FEC8-3700-0-0-0-7:/$
02:49 PM Lcvette: turboss ^^^
02:51 PM Lcvette: TurBoss: nothing happens
02:54 PM Lcvette: does my pc need to be reinstalled again from scratch?
02:54 PM Lcvette: :(
02:54 PM TurBoss: no
02:58 PM Lcvette: i can get to that folder through the desktop home folder
02:58 PM Lcvette: has files named launcher-14, 15, 16, 28, 29, 32, 33
03:00 PM TurBoss: can you rename the panel folder?
03:00 PM * Lcvette uploaded an image: Screenshot_2020-02-10_15-53-31.png (72KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/sWIQBXUugKoYOegKtYgAUQdV >
03:01 PM * Lcvette uploaded an image: Screenshot_2020-02-10_15-54-19.png (70KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ApHGdcbzUZjZTwVgGoIHRatb >
03:02 PM TurBoss: yes that just rename to panel_broke or something
03:02 PM TurBoss: and logout
03:03 PM Lcvette: ok
03:03 PM Lcvette: im back in still no panel;
03:03 PM TurBoss: :/
03:03 PM TurBoss: rename xfce4
03:04 PM TurBoss: it will generate a new one
03:05 PM Lcvette: ok back in but still no panel, but all my bsettings are back to stock
03:06 PM Lcvette: stock abckrground, stock icons etc
03:06 PM Lcvette: no enubar
03:06 PM TurBoss: phew
03:06 PM TurBoss: re rename the folder back
03:06 PM TurBoss: xfce4
03:07 PM Lcvette: there are two
03:07 PM TurBoss: nuke the xfce4 and restore the name of the other
03:08 PM Lcvette: panel too?
03:08 PM TurBoss: yes
03:10 PM TurBoss: Main Menu> Settings > Panel
03:10 PM TurBoss: can you open a main menu?
03:10 PM Lcvette: no its gone
03:10 PM Lcvette: lol
03:10 PM Lcvette: its in the menu bar
03:11 PM TurBoss: right click on desktop?
03:11 PM Lcvette: yes have applications in there
03:12 PM Lcvette: ok a panel is there but it says im running in kisk mode and im not allowed to aolter it
03:12 PM Lcvette: kiosk
03:13 PM TurBoss: :/
03:13 PM Lcvette: how do i get out of kiosk mode?
03:13 PM Lcvette: maybe thats why the menubar dissapeared?
03:22 PM Lcvette: linux is buggin out
03:22 PM Lcvette: :o
03:22 PM Lcvette: thought this was a nstable platform
03:22 PM Lcvette: lol
03:22 PM Lcvette: maybe the networking thing broke it]
03:24 PM TurBoss: 🤔
03:25 PM TurBoss: ok
03:25 PM TurBoss: ```
03:25 PM TurBoss: xcfe4-panel
03:25 PM TurBoss: Lcvette: ^^^^
03:26 PM TurBoss: end of transmission lol
03:28 PM Lcvette: this thing is nuked\
03:28 PM Lcvette: the folder no longer has a paneol folder in it
03:28 PM Lcvette: when i start it up it says no panel is running do i want to execute
03:28 PM Lcvette: something got busted :(
03:29 PM Lcvette: im just goping to einsdtall the whole system
03:29 PM Lcvette: i don't trust it anymore
03:29 PM Lcvette: gonna do all of them and remove the networking stuff
03:29 PM Lcvette: was not working properly
03:29 PM Lcvette: can i save mny nbetworking stuff?
03:29 PM TurBoss: ☹︎
03:30 PM Lcvette: what do i need to copy
03:30 PM Lcvette: mind telling me so it is easy for me to redoi it
03:30 PM TurBoss: duno /etc/samba/ maybe..
03:31 PM Lcvette: no i mean my network for mesa etc
03:31 PM Lcvette: i just want to copy it and paste it somewhere for easy reinstallation\
03:31 PM Lcvette: im done with networking
03:31 PM Lcvette: just gonna send files over a private riot chat
03:32 PM Lcvette: im just looking for my netwrok configuration
03:32 PM Lcvette: ethernet
03:32 PM Lcvette: not folder networking
03:32 PM Lcvette: how do i get that?
03:33 PM Lcvette: liike the emsa nertwork connection n10.10.10.10
03:33 PM Lcvette: turboss^^^
03:33 PM Lcvette: sudo nano something?
03:34 PM TurBoss: sorry but I don't know 😁
03:34 PM Lcvette: phuck
03:34 PM Lcvette: eth0 something
03:35 PM TurBoss: ```
03:35 PM TurBoss: /etc/network/interfaces
03:35 PM TurBoss: its a file
03:35 PM TurBoss: it has your network settings
03:36 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/AerhyzucCqFXXJPtnXuJTiqH >
03:36 PM Lcvette: thank you!
03:36 PM TurBoss: \o/
03:36 PM Lcvette: :DF
03:36 PM JT[m]: https://gnipsel.com/linuxcnc/uspace/debian9-eth.html
03:36 PM Lcvette: * :D
03:36 PM Lcvette: * :D
03:36 PM Lcvette: :D
03:37 PM Lcvette: \o/
03:37 PM Lcvette: anything else i should copy before redoing the os install?
03:38 PM Lcvette: my machine configs of course
03:38 PM TurBoss: ```
03:38 PM TurBoss: /home/cris/MATH/.xxx
03:38 PM Lcvette: MATH?
03:39 PM TurBoss: ignore
03:44 PM Lcvette: Have a y other setting recommendations I should get before I nuke?
04:54 PM Lcvette: downloading iso
05:30 PM Not-c468: [02qtpyvcp] 07TurBoss pushed 031 commit to 03installer [+0/-0/±1] 13https://git.io/JvCUp
05:30 PM Not-c468: [02qtpyvcp] 07TurBoss 03063c1ae - installer use system binaries
05:53 PM Lcvette: im having toruble
05:54 PM Lcvette: :(
05:54 PM Lcvette: is there a setting not in the bios in linux that tells it to boot from the flash drive?
05:54 PM TurBoss: press f2
05:54 PM TurBoss: f12
05:54 PM TurBoss: on boot
05:55 PM Lcvette: f12 tells it to boot from flash drive?
05:55 PM TurBoss: f12 popups a menu
05:55 PM Lcvette: i went into biod and i could not find how to make it boot from flash drive, the only option was hard drive
05:55 PM TurBoss: hit f12 like if you where to join bios
05:56 PM TurBoss: ah....
05:56 PM TurBoss: :(
05:56 PM TurBoss: if is not shown..
05:56 PM TurBoss: how did you burn the usb?
05:57 PM Lcvette: same way i always have with balena etcher
05:57 PM Lcvette: ok, f12 worked on my test pc
05:58 PM CaptHindsight: having written BIOS's I always assume that they are broken until proven otherwise
06:23 PM Not-c468: [02qtpyvcp] 07TurBoss pushed 031 commit to 03installer [+0/-0/±1] 13https://git.io/JvCka
06:23 PM Not-c468: [02qtpyvcp] 07TurBoss 0388290a8 - revert use of system binaries
06:25 PM TurBoss: n8
06:26 PM Lcvette: night turboss!
06:51 PM * Lcvette uploaded an image: boost_concepts_logo.png (353KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/FsVUHmHVMsqfaranjUWIcsEO >
07:09 PM Lcvette: o/
07:10 PM Lcvette: hidey ho hazzy
07:10 PM Lcvette: :D
10:20 PM Lcvette: i just reloaded linux on the machine computer but im getting an error message
10:21 PM Lcvette: thought i was good by copying the network stuff and updating it on the new install, but apparantly i missed something
10:21 PM Lcvette: any ideas?
10:23 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/WicFtnoHiBjHkVCpWXgqfMhW >
11:21 PM * Lcvette uploaded an image: Screenshot_2020-02-11_00-13-47.png (117KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/BunzZKhBDRsuMWbpsDEkzzWo >
11:21 PM Lcvette: i changed to the new eth0 that popped up on ip a in temrinal
11:22 PM Lcvette: im stumped at why i have that mac adddress not found error
11:22 PM Lcvette: eveyrthing should be the same i would think
11:22 PM Lcvette: any help very much appreciated!
11:40 PM CaptHindsight: new Stretch install?
11:41 PM CaptHindsight: did you setup networking during the install or are you trying to configure networking after skipping that step during the install?