#hazzy Logs

Feb 05 2020

12:02 AM TurBoss: duno Lcvette
12:02 AM Lcvette: /o\
12:02 AM TurBoss: 😈
12:02 AM TurBoss: 😒
12:03 AM TurBoss: ⛸︎
12:03 AM Lcvette: maybe needs new logic
12:03 AM Lcvette: instead of math, just have it check the var file for 0's or the tool number?
12:09 AM TurBoss: they are allready stored in #1-12
12:15 AM Lcvette: lcvette is gonna go nuts trying to figure this out
12:44 AM Lcvette: i just talked to my buddy clint who runs this remap and said he has never seen this issue before
12:44 AM Lcvette: so it has to be in something we have changed or done in probe basic r qtpyvcp
12:45 AM Lcvette: my brain hurts
12:45 AM Lcvette: and im stumped why it ran earlier today and is broken now
12:52 AM TurBoss: nc -l
12:56 AM Lcvette: What's that?
12:57 AM TurBoss: wrong window
01:08 AM Lcvette: When a file is loaded, t runs through the code
01:09 AM Lcvette: And that's where it's running through the remap files?
01:09 AM TurBoss: yes
01:09 AM TurBoss: to draw the plot and others
01:09 AM Lcvette: Ok
01:10 AM Lcvette: So the error message could only be triggered by the remap?
01:11 AM Lcvette: But if that's the case how come Clint's doesn't get an error using the same remaps?
01:11 AM Lcvette: So then what is different?
01:11 AM Lcvette: The only thing I can think is the vtk
01:11 AM Lcvette: ?
01:19 AM Lcvette: It ran perfect weather today
01:19 AM Lcvette: How is this possible? I'm trying everything I can think of to replicate what I did this morning
01:19 AM Lcvette: No luck
01:23 AM TurBoss: no idea...
01:23 AM * TurBoss uploaded a video: Cyber1.webm (6420KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ENzanCJXkTYEaZgVAbCtjveo >
04:56 AM jthornton: morning
05:05 AM TurBoss: hey JT
07:46 AM hazzy-m: morning
08:34 AM Lcvette: Morning
09:08 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/NpTKozCemisTTaBRKjzoaqjG >
09:08 AM Lcvette: anyone have any ideas on this?
09:09 AM Lcvette: this is driving me batty
09:09 AM Lcvette: i can't load programs anymore
09:09 AM Lcvette: im mid job on the machine and stuck
09:22 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/iVYwpbGHQThMUYYLjAOyJjpu >
09:22 AM Lcvette: i deleted that line to see what would happen and ran it again, this was the new error i got
09:23 AM Lcvette: does this add any help from your eyes?
09:23 AM Lcvette: im goin bonkers here
09:59 AM Lcvette: ok got it to load by clesaring the var file and loading the tools from scratch
09:59 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/GgWcnbMDmbkbUARPynTUbdgW >
09:59 AM Lcvette: it ran through the toolchange macro on load fine here
10:06 AM TurBoss: Lcvette: something working?
10:06 AM Lcvette: now it is not messing up
10:06 AM TurBoss: \o/
10:07 AM Lcvette: /o\
10:07 AM Lcvette: i went through and fixed some things
10:08 AM Lcvette: but i highly doubt my piddling fixed it
10:08 AM Lcvette: nope got an error again
10:10 AM Lcvette: i can freshly load the carousel for case_machining_op_1.ngc
10:10 AM Lcvette: and load that file and it works
10:10 AM Lcvette: just like it did yesterday on the real machine
10:10 AM Lcvette: if i close that file
10:10 AM Lcvette: and load tool 2 in the spindle
10:11 AM Lcvette: and store it in the carousel
10:11 AM Lcvette: then load the blank program to clear out op_1 and load op_2, i get the error
10:12 AM Lcvette: it doesn't like loading op_2 for some reason
10:12 AM Lcvette: not sure why
10:13 AM Lcvette: wtf is going on...lol this is maddening
10:13 AM Lcvette: work but hen doesn't work
10:13 AM Lcvette: * work but then doesn't work
10:14 AM Lcvette: turboss ... this is from it working then not working then working etc
10:14 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/aFnhYpDDtZKzXTdDXOWSKeyO >
10:15 AM Lcvette: so you can see its working sometimes but not others
10:36 AM * Lcvette posted a file: atc_error_test_1.ngc (100KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/EeCNQDOzgRLJIKNBQbyHOJsX >
10:43 AM Lcvette: i dunno
10:43 AM Lcvette: i can't find the solution but it works with the first ngc file but not with the second
10:43 AM Lcvette: very strainge
10:50 AM Lcvette: ok something very strange is happening with the one that does load
10:59 AM Lcvette: maybe i fixed
10:59 AM * Lcvette posted a file: case_machining_op_2.ngc (100KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/QuTilSfIsFLmSmNpzMgvabjD >
11:04 AM TurBoss: yes?
11:04 AM TurBoss: how?
11:05 AM Lcvette: still loading tools to test
11:07 AM Lcvette: nope
11:07 AM Lcvette: thought i found something in my post that broke it
11:07 AM Lcvette: but its not it
11:09 AM * Lcvette posted a file: case_machining_op_2.ngc (123KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/CzYBJRZDZZsHJHLkUhnCdYcV >
11:18 AM * Lcvette posted a file: case_machining_op_2.ngc (123KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ggTCYIrCYyCTmrUZMLUUpSPQ >
11:25 AM Lcvette: i did find a bug in vtk though
11:25 AM Lcvette: with offsets
11:26 AM TurBoss: yes!
11:26 AM TurBoss: which one
11:28 AM Lcvette: with multiple offsets
11:29 AM Lcvette: when you change offset it shifts all of the model to the offset you select
11:29 AM Lcvette: instead of moving just the prigin to the position
11:30 AM TurBoss: yes its fixed on vtkgx branch
11:33 AM Lcvette: what is vtkgx branch?
11:37 AM Lcvette: TurBoss (@TurBoss:matrix.org): ^^
11:38 AM TurBoss: the multi offsets 3d plot
11:38 AM Lcvette: Oh, that needs to be implemented I think then
11:39 AM TurBoss: not finished it needs to draw rapids between paths
11:39 AM TurBoss: need halp
11:40 AM Lcvette: Is the rapids thing independent from the offsets thing?
11:45 AM TurBoss: sorry @lcvette:matrix.org im away
12:04 PM JT[m]: Another year another echo...
12:25 PM * Lcvette posted a file: language-linuxcnc-gcode.7z (2KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/XpwyCLFUkojjAoNpUMHqiRkj >
12:31 PM * Lcvette posted a file: case_machining_op_2.ngc (101KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/BNyDaFkRgShVAJGxmwOaUIAw >
12:47 PM Lcvette: i think i have a hypothesis
12:47 PM Lcvette: i get errors if the tools arenot in the order of operation in the carousel
12:48 PM Lcvette: if i load the tools in case_machining_op_1.ngc in the correct order in the carousel, it loads
12:48 PM Lcvette: if they are rearranged it gives an error
12:49 PM Lcvette: in case_machining_op_2 it uses a tool twice in different order so i think that is why it gives an error
12:49 PM Lcvette: i am going to test by using a different tool so it only uses each tool in the carousel once in the correct order, if my hypothesis is correct it will load
12:49 PM Lcvette: and we will at least know the reason for the bug
12:53 PM * Lcvette posted a file: case_machining_op_2.ngc (101KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/RUZRbjusVzxnCVhxiXAXobMr >
12:57 PM Lcvette: hypothesis was correct
12:58 PM Lcvette: by not using the same tool twice it loads fine
12:58 PM Lcvette: no errors
12:59 PM Lcvette: so what is causing error when the same tool is used in different sections of the program, apparantly when loading it becomes an issue
12:59 PM Lcvette: maybe because of the random tool changer?
12:59 PM Lcvette: maybe it puts the tool back in a different pocket and when it looks for that tool again its not there?
01:00 PM Lcvette: turboss, i found something at least
01:00 PM Lcvette: it defintiely feels like aloading bug in linuxcnc now
01:09 PM Lcvette: i wonder if when running through the file load it is not accounting for the tool being put back in the carousel?
01:09 PM Lcvette: seems to make the most sense to me
02:00 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+2/-0/±5] 13https://git.io/JvZLN
02:00 PM Not-c468: [02probe_basic] 07Lcvette 036a8cc8e - added tool library to sim, fixed tool load button to work with enter
02:01 PM Not-c468: [02probe_basic] 07Lcvette tagged 036a8cc8e as 03v0.1.8 13https://git.io/JvZLA
02:01 PM Not-c468: [02probe_basic] 07Lcvette created tag 03v0.1.8 - 13https://git.io/JeDwL
02:02 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvZLp
02:02 PM Not-c468: [02probe_basic] 07traviscibot 03da0e36f - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
02:02 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvZLh
02:02 PM Not-c468: [02probe_basic] 07traviscibot 03fb35202 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
02:03 PM Not-c468: [02probe_basic] 07KurtJacobson published 03v0.1.8 | v0.1.8 - 13https://git.io/JvZLj
02:03 PM travis-ci: kcjengr/probe_basic#268 (v0.1.8 - 6a8cc8e : Chris): The build passed.
02:03 PM travis-ci: Diff view : https://github.com/kcjengr/probe_basic/compare/v0.1.8
02:03 PM travis-ci: Build details : https://travis-ci.org/kcjengr/probe_basic/builds/646572001
02:14 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JvZtr
02:14 PM Not-c468: [02probe_basic] 07Lcvette 038808946 - update probe basic docs for v0.1.8 link
02:15 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvZtP
02:15 PM Not-c468: [02probe_basic] 07traviscibot 0349ed224 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:32 PM * Lcvette posted a file: case_op_2_facing.ngc (0KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/gjYOdanmULOEpFIImhmhtLzD >
03:41 PM * Lcvette posted a file: case_op_2_facing.ngc (0KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/RqqybZbLKCwOCwJyIFjyCHWD >
04:01 PM * Lcvette posted a file: case_machining_op_2.ngc (101KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/EuSikwNEBeKceLgrbTbasntI >
04:01 PM * Lcvette posted a file: case_op_facing_2.ngc (1KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/MuFVLxSpFzsbIeOfgxpGeIRh >
05:13 PM Lcvette: hazzy o/
05:48 PM * Lcvette posted a file: motor_bracket_op_1.ngc (12KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/wJjcgBNeFujhtswoOsLQOAwU >
05:48 PM * Lcvette posted a file: motor_bracket_op_2.ngc (129KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/aYwfUOLWIBRdvFAkNTsUkSSF >
06:12 PM * Lcvette posted a file: motor_bracket_tap_op.ngc (0KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/yuouoaSpuNqOzNtlGQlBineX >
06:50 PM * Lcvette posted a file: vise_jaw_chamfer.ngc (1KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/hUGOWlpFJCznbkMnLViZEcOR >
08:10 PM * Lcvette uploaded an image: image.png (1986KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/yhumaHPocEsYzUOjAIRnkwxo >
08:13 PM Lcvette: getting there !