#hazzy Logs
Jan 23 2020
#hazzy Calendar
05:31 AM hazzy-m: Hurray!
05:31 AM hazzy-m: morning
05:36 AM jthornton: morning
05:37 AM hazzy-m: Hello KimK
08:19 AM Lcvette: Morning
09:34 AM dremeier[m]: good afternoon😁
09:34 AM dremeier[m]: I uploaded some files https://github.com/dremeier/RedDragon/tree/master/dev_goal
09:35 AM dremeier[m]: just to give you a first impression
09:35 AM dremeier[m]: not ready jet
11:38 AM cerna: dremeier: Did you delete that repository?
11:39 AM dremeier[m]: nope is private
12:21 PM TurBoss: hello
12:23 PM Lcvette: \o/
12:23 PM Lcvette: urboss is here
12:23 PM Lcvette: * turboss is here
12:23 PM Lcvette: hurray!
12:23 PM Lcvette: atctest.ngc
12:23 PM TurBoss: sup!
12:23 PM Lcvette: no longer needed in machine sub folder?
12:23 PM Lcvette: just a code test im guessing?
12:24 PM TurBoss: atctest.ngc?
12:24 PM TurBoss: duno about tha file
12:24 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/iWdntgrBQAwyJEGbpBfRUOfH >
12:24 PM TurBoss: no
12:24 PM TurBoss: just tests
12:24 PM Lcvette: m14?
12:24 PM TurBoss: thosse messages doesn't work any more
12:24 PM Lcvette: was for old hal version?
12:24 PM Lcvette: remove
12:25 PM Lcvette: and in ini remap?
12:26 PM TurBoss: was just a test file to load from probebasic
12:26 PM TurBoss: not a sub or macro
12:27 PM Lcvette: So can remove atctest and m14
12:27 PM TurBoss: yes
12:27 PM TurBoss: m14 is gone
12:27 PM Lcvette: Hurray
12:29 PM dremeier[m]: Hey guys, did you had a look in my Repro?
12:29 PM TurBoss: yes
12:29 PM Lcvette: Yes
12:29 PM Lcvette: I am in the shop now though
12:30 PM dremeier[m]: Ok, fine, it works 👍
12:32 PM TurBoss: well defiined descriptions
12:35 PM dremeier[m]: not realy, thx😇
12:46 PM Lcvette: dremeier: turboss and i looked over the proposal and it would be a complete ground up gui build, we think it is going to take more time then we have and the time we have away from finishing the primary gui objectives we are trying to make available for all.
12:48 PM dremeier[m]: 😩
12:55 PM dremeier[m]: ok, a other solution:
12:55 PM dremeier[m]: we leave the gui like it is, we just change some beavior, rutines and some extra buttons I need? you can leave it open for all or do a special Version for my need, wich can also be open for all. For your extra work I`m willing to pay.
12:55 PM dremeier[m]: What do you think?
01:08 PM Tom_L: learn how to add buttons and DIY
01:19 PM dremeier[m]: I started to do so, Tom. I Button is not the problem but to get the funktion behind, I don´t under stand.
01:21 PM dremeier[m]: For example I need that behavior onPuase button: on pause, the code stops, remember the position, goes to a Z-safe position, stops spindel.
01:22 PM dremeier[m]: for resume: start Spindel, wait for rpm-ok, goes to last position, start code.
01:22 PM dremeier[m]: *edit:* ~~I started to do so, Tom. I Button is not the problem but to get the funktion behind, I don´t under stand.~~ -> I started to do so, Tom. Button is not the problem but to get the funktion behind, I don´t under stand.
01:23 PM dremeier[m]: ^^ I guess a lot peoble will love that feature
01:24 PM dremeier[m]: ^^ I guess a lot people will love that feature
01:33 PM dremeier: Hey, here are a lot more people as in the discod channel:]
02:09 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-2/±7] 13https://git.io/Jvtue
02:09 PM Not-c468: [02probe_basic] 07Lcvette 035b0730e - fixed button rotation to match in m10, m11, m12 and fixed gui buttons
02:10 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/Jvtuv
02:10 PM Not-c468: [02probe_basic] 07traviscibot 0311bd1d2 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
02:10 PM Not-c468: [02probe_basic] 07Lcvette tagged 035b0730e as 03v0.1.5 13https://git.io/Jvtuf
02:10 PM Not-c468: [02probe_basic] 07Lcvette created tag 03v0.1.5 - 13https://git.io/JeDwL
02:12 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvtuL
02:12 PM Not-c468: [02probe_basic] 07traviscibot 03eca114e - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
02:12 PM Not-c468: [02probe_basic] 07KurtJacobson published 03v0.1.5 | v0.1.5 - 13https://git.io/Jvtut
02:12 PM travis-ci: kcjengr/probe_basic#252 (v0.1.5 - 5b0730e : Chris): The build passed.
02:12 PM travis-ci: Diff view : https://github.com/kcjengr/probe_basic/compare/v0.1.5
02:12 PM travis-ci: Build details : https://travis-ci.org/kcjengr/probe_basic/builds/641063784
02:20 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/JvtuZ
02:20 PM Not-c468: [02probe_basic] 07Lcvette 03c3b9e3f - update docs for v0.1.5
02:22 PM Not-c468: [02probe_basic] 07KurtJacobson pushed 031 commit to 03gh-pages [+88/-0/±0] 13https://git.io/JvtuC
02:22 PM Not-c468: [02probe_basic] 07traviscibot 0341eb4f9 - Deploy kcjengr/probe_basic to github.com/kcjengr/probe_basic.git:gh-pages
03:14 PM Lcvette: probe absic is running bug free so far new atc changes are working flawlessly on the machine!
03:14 PM Lcvette: * probe basic is running bug free so far new atc changes are working flawlessly on the machine!
03:14 PM Lcvette: getting ready to cut the maiden part finally
03:15 PM Lcvette: pucker factor is high
03:15 PM Lcvette: ops include rigid tapping
03:53 PM TurBoss: hurray!!
04:51 PM Lcvette: ran the very first part on the big machine!!!
04:51 PM Lcvette: was too nervouse to get footage of probe basic
04:52 PM Lcvette: will have to setup a secondary camera next time or do a screen recording of probe basic working
04:52 PM Lcvette: wonder if we can add some outputs from the remap to have it flip probe basic to the atc screen during a tool change and back to main window at end of tool change
05:04 PM * Lcvette uploaded an image: IMG_20200123_175549297.jpg (361KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/RrJmvkCazpIBvGAxiUQxQKRU >
05:06 PM * Lcvette uploaded an image: IMG_20200123_175605072.jpg (174KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/IFEgdQINrCkUPaShSKGxVtzR >
05:06 PM * Lcvette uploaded an image: VectorImage_2020-01-23_055942.jpg (166KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/SXmabKzuHDsHuquoSoBdUDNY >
05:07 PM * Lcvette uploaded an image: VectorImage_2020-01-23_060013.jpg (132KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/xopwroaZiYIBaQUoLXhJpPtG >
05:09 PM Lcvette: https://youtu.be/7eixpUVnxDg
05:13 PM TurBoss: amazing!
05:13 PM TurBoss: just tuned on tv
05:19 PM roguish[m]: Lcvette: dude, making chips.
05:26 PM Lcvette: yeah buddy!
05:26 PM dremeier[m]: good job ! Bravo!👌
05:30 PM dremeier[m]: How does it works after a tool change is done, is there a break, to adjust the flood or cleaning from the chip...., and a confirm button to go ahead, or does the machine runs without a break?😲
05:35 PM Lcvette: yes for now i have it working much like a manual tool change so i can adjust the coolant nozzles
05:36 PM Lcvette: probebaly needs to be at th end of the tool change
06:04 PM dremeier[m]: If you say it is much like a manual tool change, do you mean you have one g-code for one tool?
06:09 PM Lcvette: no its one posted gcode from fusion360
06:10 PM Lcvette: but it stops at m6
06:10 PM hazzy-m: Lcvette: It would be very easy to make it switch to the tool change on M6 and then back!
06:11 PM hazzy-m: need a little logic so it does not switch if the machine is not in auto mode, and not to switch is the screen was already on the ATC screen
06:11 PM hazzy-m: but that should be simple
06:11 PM hazzy-m: I'll work on it now
06:12 PM Lcvette: sweet!!
06:13 PM dremeier[m]: I don´t under stand what you mean but sounds great 🙂
06:14 PM hazzy-m: dremeier: ProbeBasic will switch to the ATC tab during a tool change, and then back to the main tab when it's done
06:16 PM dremeier[m]: in the royal software there was a popup after a M6 to ask if you read to go further (depends on the settings), this works for manual change or ATC , was avery hand feature.
06:17 PM dremeier[m]: oh. also great feature.
06:18 PM dremeier[m]: .... I guess we have no deal at all???
06:20 PM dremeier[m]: then I ´ve to try to do it by my self, hope you can help me a bit🙏
06:20 PM Lcvette: dremeier: my mind is elsewhere at the moment, I have some things to wrap up on my big machine
06:25 PM dremeier[m]: I respect your decision at all, just want to be clear.
06:27 PM dremeier[m]: never the less, I hope we will meet us on Ibiza🤟
06:30 PM dremeier[m]: Can I ask you about my written routines on the excel-sheet, what do you think, does they make sens for you?
06:57 PM Lcvette: Man I went to wash down the machine and the wshdown pump didn't turn on... Looked under the wing of the machine and saw arcing through the pump case vents...
06:57 PM Lcvette: Never ends
07:13 PM hazzy-m: Yikes
07:13 PM Lcvette: i know riught
07:13 PM Lcvette: could have burned down the shop
07:14 PM Lcvette: have it on a 10A circuit breaker and it did not trip
07:14 PM Lcvette: its one of those impeller type pumps and i think the impeller is frozen in the eccentric boare
07:14 PM TurBoss: /o\
07:14 PM Lcvette: armature was just taking all the current
07:15 PM Lcvette: it has sat for a really long time without being run soo...
07:15 PM Lcvette: and its harbor freight
07:15 PM roguish[m]: another nice sunset..... http://12.201.135.206/Race%20Deck/siteproxy.html
07:15 PM Lcvette: so i can exchange it inside of 1 year i think
07:16 PM Lcvette: https://www.harborfreight.com/110-hp-transfer-pump-320-gph-63317.html
07:17 PM Lcvette: 90 days from the date of purchase
07:17 PM Lcvette: :(
07:17 PM Lcvette: think im past that
07:18 PM hazzy-m: It’s a universal motor, those are typically tough as nails. Are you sure it’s not the brush just arcing because the rotor is stuck?
07:19 PM Lcvette: im sure thats what it is
07:19 PM Lcvette: it was smoking too
07:19 PM Lcvette: i may take it apart grease the impellar again and see if it runs
07:19 PM Lcvette: i'll go try that now
07:19 PM Lcvette: while i already have coolant soaked clothes on
07:20 PM Lcvette: known in the state of california to cause all illnesses
07:20 PM Lcvette: and known in the state of North Carolina to cause smiles and sweet parts
07:20 PM Lcvette: lol
07:21 PM hazzy-m: LOL
07:23 PM roguish[m]: hey, we out here represent that...
07:23 PM roguish[m]: everything causes cancer.
07:23 PM roguish[m]: Cal is about to claim that Tylenol causes cancer. really.
07:24 PM roguish[m]: just wait for the law suits to start.
07:24 PM roguish[m]: should have been a lawyer. never ending work.
07:42 PM hazzy-m: roguish: lol, that's crazy
07:42 PM hazzy-m: My neice always says that she is sure rain causes cancer, so we should find a way to get rid of it
07:45 PM * hazzy-m uploaded an image: ima_9c40c39.png (220KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/cxGGBknrCAUGQKJLtgFqPvsr >
07:46 PM hazzy-m: xD
07:46 PM hazzy-m: this is why you all couldn't see the video I posed yesterday lol
07:47 PM hazzy-m: I had the radio playing in the background (hardly audible) when my windshield got smashed and I guess YouTube in its infinite decided it was a copyright violation
07:53 PM TurBoss: lol
07:59 PM hazzy-m: dremeier: just read the requirements for your VCP, you need to do more research on LinuxCNC and what it is capable of.
07:59 PM hazzy-m: Most of the things you want should _NOT_ be implemented on the UI/VCP side for safety reasons, and I think it you look you will see that you can configure LinuxCNC to do most of what you want already without needing to do anything special
08:15 PM Lcvette: hahahaha
08:15 PM Lcvette: i just went out and took the ront cover off the pump and turned it on
08:15 PM Lcvette: it ran
08:16 PM Lcvette: put it together and ran it for a few mminutes while i washed the mill out and it smelled like it was about to explode
08:16 PM Lcvette: horrible sticnk
08:16 PM Lcvette: * horrible stink
08:16 PM Lcvette: so i think its shot
08:16 PM Lcvette: whatever happened to it while it wasn't turning burnt up
08:16 PM Lcvette: probably the armature
08:16 PM Lcvette: it also would not hold a constant speed
08:16 PM Lcvette: smelled like the old treadmill motors i used to use on the g0704
08:17 PM Lcvette: had one of those catch fire too
08:17 PM Lcvette: ah snap touch off tool
08:17 PM Lcvette: *
08:18 PM Lcvette: hazzy^^^
08:22 PM hazzy-m: haha!
08:22 PM hazzy-m: let the smoke out
08:22 PM hazzy-m: :D
09:59 PM * Lcvette uploaded an image: Screenshot_2020-01-23_22-51-44.png (669KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/XDkFgJSThijqFfZGCxXjQZDy >
11:14 PM KimK: hazzy-m: Hello back. Thanks for letting me hang around, you guys are always doing something interesting.