#hazzy Logs
Jan 20 2020
#hazzy Calendar
07:31 AM hazzy-m: I like the second one Lcvette
07:32 AM hazzy-m: how did you make it matte?
07:34 AM hazzy-m: awesome!
08:39 AM Lcvette: hazzy: just selected a different material
08:39 AM Lcvette: used stainless satin
08:39 AM hazzy-m: Ah
08:39 AM Lcvette: and played with the rendering settings
08:40 AM Lcvette: fusion doesn't offer a ton of render settings like solidworks does though
08:43 AM Lcvette: hazzy: hazzy for the atc setup i figured it would be easy to have the m6 remap macros populated with the data from these boxes, i will add some set buttons to pull the appropriate g53 machine coordinates in to the VCPLineEdits to make setting up the atc for the machine easier for the end user
08:43 AM Lcvette: but the hal side of course will still be a challenge
08:44 AM Lcvette: need to brainstorm on a way to make that a little easier as well maybe
08:44 AM hazzy-m: Shouldn't be that hard, I think the4e are some good examples
08:45 AM Lcvette: yeah i figured nailing it down and showing some good examples in a atc help window might make it easier
08:45 AM Lcvette: does your brothers router have an atc spindle?
08:50 AM hazzy-m: no, not yet but he really needs one since he runs production
08:50 AM hazzy-m: he has a very efficient tool change procedure though with automatic tool length measurement etc.
09:08 AM Lcvette: with atc spindle and repeatable length tool holders he wouldn't need to measure during a tool change! and he could use a touch probe for offset finding!
09:09 AM Lcvette: would increase his productivity tremendously
09:09 AM * Lcvette uploaded an image: linear_atc_data_entry.png (86KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/UZRqtJQOemBeDaNWZyNhJYBK >
09:12 AM hazzy-m: He already uses a probe for finding the work peice. A tool change takes about 30s do not bad at all, but he wouldn't have to be around for the tool change with an ATC
09:14 AM Lcvette: exactly
09:14 AM Lcvette: and once he probed all tools would be properly set for tlo's
09:43 AM * Lcvette uploaded an image: Screenshot_2020-01-20_10-36-12.png (270KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/agnwCCtqmqaDgSiHCvQcugoD >
09:44 AM hazzy-m: What does three set do?
09:45 AM Lcvette: im going to have it pull in the appropriate axis G53 current coordinates using rules
09:46 AM Lcvette: so you would jog the machine into the appropriate position then hit the set button and it will populate the VCPSettingsLineEdit
09:46 AM Lcvette: to be saved for getting sucked into the M6 remap macros
09:48 AM Lcvette: this way of you put tools in you could essentially probe the tool holder taper for center and use those coordinate
09:49 AM Lcvette: hazzy: ^^^
09:49 AM Lcvette: still working it all out in myhead though so im sure it will need tweaks
09:49 AM Lcvette: lol
09:49 AM Lcvette: always does
10:04 AM Lcvette: yeah seems the two distance boxes would just be fill in lineedits
10:05 AM Lcvette: i removed 2 of them and left the set button on the P1 Position x and y boxes
10:05 AM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03Linear_ATC_Branch [+1/-1/±3] 13https://git.io/JvI2F
10:05 AM Not-c468: [02probe_basic] 07Lcvette 035939757 - linear atc setup page work
10:08 AM * Lcvette uploaded an image: Screenshot_2020-01-20_11-01-29.png (269KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/OnBvOYNGlVWhPyzbZEKDHBdq >
11:20 AM Lcvette: can you use a NPN-NO proximity switch with mesa 7i76e?
11:30 AM burklefoo: You can but it needs a pullup resistor
11:30 AM burklefoo: PNP PROX = no additional hardware
11:31 AM Lcvette: yeah, what i was affraid of, i always use PNP-NC on my machines
11:31 AM Lcvette: im going to spec that for my buddy and have him replace them to save the headache of dealing with resistors and allow direct wiring
11:31 AM Lcvette: thanks burklefoo!
11:34 AM hazzy-m: Lcvette: are you also going to have an entry for numbers of stations?
11:36 AM Lcvette: i need to discuss that with turboss, we briefly touched on it the other day and in qml i know it is explained how to use a linear pattern which could maybe be used and then the user can specify in a box how many pockets the rack will have and the qml can take that and data and create the graphical representation to output.
11:37 AM Lcvette: but the qml stuff is more turboss's area of expertise for the dynamics of how that could work
11:37 AM Lcvette: but it would be awesome
11:38 AM Lcvette: i can also add some data entry boxes to determine if the rack is on the x+, x-, y+, y- edge opf the machine so the movements and other data entry boxes for xy Pocket 1 location all jive with one another
11:38 AM Lcvette: will be a challengine macro write for sure but i think i can manage it
12:29 PM Lcvette: * will be a challenging macro write for sure but i think i can manage it
12:44 PM Lcvette: any of you guys interested in doing a group buy on the radio wired Pendants? need 10 to get the group buy price of $125/ea
12:44 PM Lcvette: have 2 interested currently
12:44 PM Lcvette: * have 3 interested currently
12:46 PM * Lcvette uploaded an image: image.png (134KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/SOSeaNhmPTlTlqIRYVrpskEm >
12:47 PM Lcvette: wires in to mesa
12:52 PM Lcvette: * have 4 interested currently
12:53 PM Lcvette: have 5 now
12:53 PM Lcvette: need 5 more
12:53 PM Lcvette: Hazzy you and yourbrother need one!
12:53 PM Lcvette: * Hazzy you and your brother need one!
12:56 PM hazzy-m: Ha! What's the latency on them?
12:56 PM Lcvette: not regognizable on my big machine
12:56 PM * hazzy-m uploaded an image: ima_e55f1ca.jpeg (223KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/pTmluLhJsWRkXDnSdlxshNpG >
12:56 PM Lcvette: and i was wary after using a crappy wireless usb type
12:57 PM Lcvette: very nice feeling unit, has some weight to it and a great formed rubber cover for drop protection
12:57 PM Lcvette: magnetic back for sticking on the machine or enclosure
12:57 PM Lcvette: and super easy to wire in to mesa
12:58 PM Lcvette: 24v power to it and it steps the step pulse down to 5v internally on the receiver
12:58 PM Lcvette: the field switches for increment and axis are left 24v for connecting to mesa field inputs
12:59 PM Lcvette: and it already has a sorted out halfile!
12:59 PM Lcvette: :D
01:00 PM Lcvette: has a 60m range
01:09 PM Lcvette: have 6 now, need 4 more
01:09 PM Lcvette: \o/
01:11 PM Lcvette: turboss, can we make another one of those spaceship laser shooting timelines of the project?
01:11 PM Lcvette: and will it have the probe basic split in it?
01:11 PM Lcvette: and keep track of probe basic?
01:12 PM TurBoss: a branch?
01:12 PM TurBoss: :P
01:12 PM Lcvette: https://www.youtube.com/watch?v=LlO3p6JNPnM
01:12 PM Lcvette: this thingy
01:19 PM Lcvette: have 7 in for the pendant need 3 more
01:19 PM TurBoss: yes with gource
01:51 PM Lcvette: have 9, need one more
02:15 PM Lcvette: come on hazzy jump on the group buy, you are daddy warbucks with the big job now
02:28 PM Lcvette: turboss are you on dev?
02:28 PM TurBoss: nope
02:41 PM Tom_shop is now known as Tom_L
04:55 PM Lcvette: turboss are you at dev now?
04:55 PM Lcvette: :D
04:56 PM TurBoss: its cold there
04:56 PM TurBoss: lol
04:56 PM Lcvette: very cool yes
04:57 PM Lcvette: 41deg F
04:57 PM Lcvette: low tonight is 25deg F
04:57 PM TurBoss: 😲
04:57 PM Lcvette: :o
04:58 PM Lcvette: let me know if you want to work on messages
04:58 PM Lcvette: im here
05:04 PM TurBoss: ok
05:16 PM TurBoss: Lcvette: o/ç
05:16 PM Lcvette: \o/
05:16 PM Lcvette: :D
05:16 PM Lcvette: hurray!
05:20 PM Lcvette: is M13 ok?
05:20 PM Lcvette: whats the bnext macros?
05:20 PM Lcvette: turboss ^^^
05:21 PM TurBoss: i think macros are good
05:26 PM * Lcvette uploaded an image: Screenshot_2020-01-20_18-19-00.png (72KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/lnQCoyRTmAdUaRLgAOhKOZKP >
05:28 PM TurBoss: is how i notice thata tool has stored on the pocket
05:28 PM TurBoss: and so others
05:30 PM Lcvette: oh ok
05:31 PM Lcvette: in qml file?
05:32 PM TurBoss: is from the python part
05:32 PM Lcvette: file name
05:32 PM Lcvette: ?
05:33 PM TurBoss: qtpyvcp/widgets/display_widgets/atc_widget/atc.py
05:34 PM Lcvette: ok im there
05:37 PM TurBoss: afk 10 min
05:38 PM Lcvette: ok
05:38 PM Lcvette: ok
05:48 PM TurBoss: o/
05:49 PM Lcvette: o/
05:55 PM jthornton: long day here...
05:56 PM TurBoss: hey
05:56 PM jthornton: just finished putting everything back almost from my trip to Cuba Mo
05:57 PM TurBoss: good
05:57 PM jthornton: yea a good paying day for sure
05:57 PM jthornton: came home with a check in my pocket...
05:58 PM TurBoss: good good
05:58 PM TurBoss: is twice good
05:58 PM TurBoss: lol
05:59 PM TurBoss: Lcvette: I can't figure where the breakage is
05:59 PM jthornton: yea I like doing work for them, it's a no wait payday
06:03 PM Lcvette: No?
06:03 PM Lcvette: Could it be in qml?
06:09 PM hazzy-m: Lcvette: thats warm! It was 22f in the georgia mountains
06:09 PM hazzy-m: even got a little snow
06:10 PM Lcvette: Brrrr
06:10 PM Lcvette: 25 for Wilmington is getting down there
06:10 PM hazzy-m: yeah, for sure!
06:10 PM hazzy-m: your quite near the coast
06:11 PM Lcvette: On the coast
06:11 PM hazzy-m: still need another for the pendant buy?
06:11 PM Lcvette: Yeah need one more
06:11 PM hazzy-m: 9+1 = 10
06:11 PM Lcvette: Yuo
06:11 PM Lcvette: :D
06:12 PM Lcvette: Hazzy turboss is struggling with ATC thing, can you see if your eyes see something his mine did not
06:13 PM hazzy-m: yes, after eating
06:13 PM TurBoss: hurray!
06:13 PM Lcvette: Hurray!
06:13 PM TurBoss: also sim is broken too
06:13 PM TurBoss: m6 load from carousel is wrong
06:19 PM TurBoss: https://www.youtube.com/watch?v=Gdode3PfTbs
06:21 PM Lcvette: Can we trade back to when it was working?
06:23 PM TurBoss: using hal?
06:23 PM TurBoss: yes
06:23 PM TurBoss: I can do a thing
06:25 PM Not-c468: [02qtpyvcp] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±2] 13https://git.io/JvIDZ
06:25 PM Not-c468: [02qtpyvcp] 07TurBoss 03e9ae72f - rename rev fwd to cw and ccw
06:26 PM Not-c468: [02probe_basic] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±2] 13https://git.io/JvIDn
06:26 PM Not-c468: [02probe_basic] 07TurBoss 03cbb63bf - rename rev fwd to cw ccw
06:27 PM TurBoss: https://github.com/kcjengr/qtpyvcp/compare/eval_atc_messages?expand=1
06:27 PM TurBoss: Lcvette: ^ ^ just scroll down there is the diff
06:29 PM Lcvette: ok gimme 15, diner time here too
06:29 PM Lcvette: im same time zone as hazzy
06:29 PM TurBoss: cool
06:29 PM Lcvette: :o
06:29 PM TurBoss: profit
06:29 PM Lcvette: lol
06:35 PM Lcvette: Same manufacturer as yours?
06:36 PM * hazzy-m uploaded an image: ima_8b4d379.jpeg (82KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/iCExOAtAxUCYmfWttWRDHjWr >
06:36 PM hazzy-m: :D
06:58 PM hazzy-m: hmm, diff looks ok
06:59 PM * hazzy-m boots into linux
07:00 PM TurBoss: i need a some signals to read all other states
07:17 PM * hazzy-m got tired of booting back and forth between windows and linux on his laptop
07:17 PM hazzy-m: the main pain is changing the SSD out each time :)
07:18 PM hazzy-m: so i decided to run Linux on my desktop and teamviewer in to it from my laptop lol
07:18 PM hazzy-m: works like a charm
07:18 PM hazzy-m: very little lag
07:22 PM Lcvette: \o/
07:23 PM Lcvette: lcvette is back!
07:23 PM Lcvette: nice hazzy so your at dev?
07:23 PM Lcvette: \:D
07:23 PM Lcvette: * :D
07:23 PM hazzy-m: yes
07:23 PM Lcvette: turboss r u here 2?
07:23 PM hazzy-m: at dev from a work computer :)
07:23 PM Lcvette: from a work computer
07:23 PM Lcvette: :O
07:26 PM Lcvette: so turboss needs some signals
07:26 PM Lcvette: and he isn't having success getting them to work
07:27 PM Lcvette: he is on the eval_atc_messages branch
07:28 PM Lcvette: in probe basic and in qtpyvcp
07:28 PM Lcvette: turboss hazzy did you go away?
07:28 PM Lcvette: or are you plugged in the zone
07:28 PM Lcvette: coding like suckerberg
07:28 PM Lcvette: * coding like zuckerberg
07:28 PM TurBoss: yo
07:28 PM TurBoss: back
07:29 PM Lcvette: \o/ \o/ \o/
07:29 PM hazzy-m: so what is broken specifically?
07:29 PM Lcvette: i'll let turboss explain
07:30 PM TurBoss: i need some hooks/signals to determine when the tool leaves pocket and reverse
07:31 PM hazzy-m: how was it done before?
07:31 PM hazzy-m: HAL signals?
07:31 PM TurBoss: hal pins
07:31 PM TurBoss: but there are 2 parts
07:31 PM TurBoss: when the atc homes and sends the stored tools in each pocket
07:32 PM roguish[m]: hey, try this. it's way cool and work great...... https://mobaxterm.mobatek.net/
07:32 PM TurBoss: 👍️
07:32 PM roguish[m]: hazzy: https://mobaxterm.mobatek.net/
07:33 PM roguish[m]: at least check it out....
07:33 PM hazzy-m: looks neat!
07:34 PM TurBoss: hazzy: does your pc have usb 3?
07:34 PM TurBoss: attach usb3 hdd enclosoure and boot from there
07:34 PM hazzy-m: yes
07:35 PM hazzy-m: that's a good idea
07:35 PM TurBoss: my dev is like that just plug on the laptop or the pc
07:35 PM TurBoss: ok
07:36 PM TurBoss: https://github.com/kcjengr/qtpyvcp/compare/eval_atc_messages?expand=1#diff-e62c6ffe1d752870f858641870fb1924R60
07:37 PM TurBoss: https://github.com/kcjengr/qtpyvcp/compare/eval_atc_messages?expand=1#diff-e62c6ffe1d752870f858641870fb1924R101
07:37 PM TurBoss: thats the signals i read
07:37 PM TurBoss: need that but from pythun
07:38 PM hazzy-m: Ah I see
07:39 PM hazzy-m: and the pocket-n pin was set from the ngc sub?
07:39 PM hazzy-m: no, I guess HAL
07:39 PM TurBoss: yes that keep track of the pockets
07:39 PM TurBoss: yes
07:39 PM TurBoss: sub -> hal -> python -> qml
07:40 PM hazzy-m: so now we need to go from sub to python, without any hal...
07:40 PM hazzy-m: since we can't send debut messages from hal
07:40 PM TurBoss: its all in sub
07:41 PM TurBoss: hall not nedded
07:41 PM TurBoss: was just a pipe
07:41 PM TurBoss: no logic there
07:41 PM hazzy-m: ok, sweet!
07:41 PM hazzy-m: so this will make it much impler
07:41 PM hazzy-m: simpler
07:41 PM hazzy-m: what is the name of the sub?
07:42 PM TurBoss: m10 11 12 13
07:44 PM hazzy-m: ah, I see the new while loop in the m13 sub
07:45 PM Lcvette: \o/
07:45 PM Lcvette: sub routines are simple
07:45 PM hazzy-m: so that replaces the store tool method
07:45 PM Lcvette: hurray!
07:45 PM TurBoss: :/
07:45 PM TurBoss: not sure
07:45 PM TurBoss: logic is not my best
07:46 PM TurBoss: I allways en killing the princess and fucking the dragon
07:46 PM hazzy-m: ok, I think I understand what the goal is
07:46 PM TurBoss: cool!
07:46 PM hazzy-m: I'll see what I can do
07:46 PM Lcvette: turboss.... take it dragin
07:46 PM Lcvette: lol
07:46 PM TurBoss: mother of
07:47 PM Lcvette: turboss what is the new messages connected to in the subroutine?
07:47 PM Lcvette: the atc.py file?
07:47 PM Lcvette: or qml?
07:47 PM TurBoss: hmmm
07:47 PM TurBoss: py
07:47 PM TurBoss: sub -> eval -> py -
07:47 PM TurBoss: * sub -> eval -> py -> qml
07:47 PM Lcvette: ah
07:47 PM Lcvette: what is the eval?
07:48 PM TurBoss: the debug message eval
07:48 PM Lcvette: is that in a file?
07:48 PM TurBoss: in m10 to 13 subs
07:48 PM TurBoss: and atc.py
07:48 PM Lcvette: ok so eval is a function not code in a file somewhere
07:49 PM Lcvette: think im grasping it a little
07:49 PM TurBoss: the new messages system
07:49 PM TurBoss: (DEBUG, EVAL[etc...
07:50 PM TurBoss: hazzy: does the atc refrencte at all?
07:50 PM Lcvette: trying to see how it is all connected
07:50 PM Lcvette: i can test reference
07:51 PM Lcvette: seems to reference fine
07:51 PM TurBoss: hazzy, Lcvette : this are the pb diff
07:51 PM TurBoss: https://github.com/kcjengr/probe_basic/compare/eval_atc_messages?expand=1
07:51 PM TurBoss: cool!
07:52 PM TurBoss: does the rotate fwd rev work?
07:52 PM TurBoss: the buttons
07:53 PM Lcvette: seems to work in the sim screen but not the gui
07:53 PM TurBoss: :/
07:53 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/QnnqhPEVxPPDLYxBRRPNJgxa >
07:54 PM TurBoss: oops
07:54 PM Lcvette: has no attribute
07:54 PM Lcvette: helps?
07:54 PM TurBoss: yes!
07:55 PM Lcvette: \o/
07:55 PM Lcvette: lcvette is the bug finder
07:55 PM Not-c468: [02qtpyvcp] 07TurBoss pushed 031 commit to 03eval_atc_messages [+0/-0/±1] 13https://git.io/JvIyF
07:55 PM Not-c468: [02qtpyvcp] 07TurBoss 037ca0939 - fix rename
07:55 PM Lcvette: same error for M12
07:56 PM TurBoss: yes
07:56 PM TurBoss: is up
07:56 PM Lcvette: i just update
08:02 PM Lcvette: only qtpyvcp update no PB?
08:02 PM Lcvette: rotates!
08:02 PM Lcvette: \o/
08:02 PM Lcvette: rotates for load tool now but i think maybe wrong diorection
08:02 PM Lcvette: sek let me compare
08:02 PM Lcvette: sim spins correct direction gui spins opposite direction (wrong direction)
08:02 PM Lcvette: used to store the tools 1-12
08:02 PM Lcvette: now it stores tool 1 then moves to pocket 12 for next tool
08:02 PM Lcvette: buttons spin correct direction
08:02 PM Lcvette: think maybe in toolchange.ngc something is backwards?
08:02 PM Lcvette: opening toolchange.ngc will look
08:02 PM TurBoss: yes
08:02 PM TurBoss: great
08:02 PM TurBoss: but buttons
08:02 PM TurBoss: go in the correct one
08:02 PM TurBoss: cool!
08:03 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/jDgFywXUCtMulPftApdpfzdl >
08:03 PM Lcvette: did you add these to toolchange.ngc?
08:04 PM Lcvette: or were they there already?
08:04 PM Lcvette: nm they were already there
08:04 PM Lcvette: i don't see anything in toolchange.ngc
08:04 PM TurBoss: :/
08:11 PM Lcvette: something si wrong with the calulations on tool storage
08:11 PM Lcvette: it tried to store a tool in a pocket that already had a tool in it
08:11 PM Lcvette: :o
08:11 PM TurBoss: :O
08:12 PM Lcvette: that would be a disaster in real life
08:13 PM TurBoss: also vismach moves erratic when loading unloading tools
08:17 PM Lcvette: im going to compare my working macros to whats in there now
08:17 PM TurBoss: ok
08:17 PM Lcvette: maybe something got accidentally deleted
08:34 PM Lcvette: i just meld compared all the macro files, its not there
08:35 PM Lcvette: turboss ^^^
08:35 PM TurBoss: :/(
08:35 PM Lcvette: the only diffeence would not make that happen
08:35 PM Lcvette: it must be in the qml calculations?
08:35 PM Lcvette: or a siugnal not making it where the old analog signals were
08:35 PM TurBoss: I'll test m10 11 12 from mdi
08:36 PM Lcvette: that seems fine
08:36 PM Lcvette: the issue is when the tool tries to store
08:37 PM Lcvette: i think the qml had some things that would make it mimic the actual atc not?
08:37 PM Lcvette: or wait we decided to have the machine move in the same and get signals no?
08:37 PM Lcvette: it needs the signals maybe?
08:37 PM TurBoss: the signals
08:37 PM TurBoss: but on atc.py
08:39 PM Lcvette: atc.qml
08:39 PM Lcvette: ?
08:40 PM Lcvette: maybe hazzy is finding something?
09:00 PM Lcvette: im looking but not finding anything that jumps out
09:00 PM Lcvette: do you want to just go back to analog hal pins?
09:01 PM Lcvette: while we sort this out
09:01 PM Lcvette: see if that can work again?
09:07 PM Lcvette: i can't find a checkout that the atc sim works anymore
09:07 PM Lcvette: turboss ^^^
09:07 PM TurBoss: ☹️
09:08 PM Lcvette: the tools do not appear in the carousel
09:08 PM Lcvette: not sure when it broke
09:08 PM Lcvette: are there files that would not be pulled in doing a checkout?
09:09 PM Lcvette: or a way top checkout differently that i may not be doing?
09:09 PM Lcvette: * or a way to checkout differently that i may not be doing?
09:09 PM Lcvette: i think going back and finding where it broke will be the key
09:09 PM Lcvette: otherwise there are too many changes to sort out the issue
09:09 PM Lcvette: and then we should be able to compare files and repair whatever is needed
09:17 PM Lcvette: when i checkout a commit does it pull all the files from that time of commit or just the changed file from that commit?
09:17 PM Lcvette: turboss ^^^
09:32 PM TurBoss: just the file with that commit
09:32 PM Lcvette: ah no wonder
09:33 PM Lcvette: so i need to find which commit file changed something
09:43 PM Lcvette: TurBoss: it looks like there is a branch that never got merged into master
09:43 PM TurBoss: yes
09:44 PM * Lcvette uploaded an image: Screenshot_2020-01-20_22-36-51.png (26KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/lQjIEVsaXxeDQECOGOIoYlaV >
09:44 PM Lcvette: could this be something?
09:44 PM TurBoss: no
09:44 PM TurBoss: that was the motion pins movement attempt
09:45 PM Lcvette: do you remember what makes the tools appear in the carousel?
09:46 PM Lcvette: is it qml?
09:46 PM TurBoss: python
09:46 PM Lcvette: is there a way to test making a tool appear simp,ly to make sure it is working?
09:47 PM Lcvette: or do you remember working in something that could have borken the functionality?
09:47 PM TurBoss: yes
09:47 PM TurBoss: ah
09:47 PM TurBoss: no
09:48 PM Lcvette: the install on my big machine still works
09:48 PM TurBoss: ok
09:48 PM Lcvette: i have not updated it because atc is now broken
09:48 PM Lcvette: is there a way maybe to pull the files from it?
09:48 PM TurBoss: in master nothing has changed
09:48 PM Lcvette: it was installed with the installer
09:48 PM TurBoss: it should work
09:49 PM Lcvette: it does not work in master
09:49 PM Lcvette: it has not worked since right after hazzy finished the messages thing
09:49 PM Lcvette: i noticed a while back
09:49 PM Lcvette: i think i mentioned it in here
09:49 PM Lcvette: im just trying to find the point at which it broke
09:50 PM TurBoss: sorry
09:50 PM * TurBoss is tired
09:50 PM Lcvette: so we can backtrace the issue
09:50 PM Lcvette: its ok
09:50 PM TurBoss: n8
09:50 PM Lcvette: night
09:50 PM Lcvette: :D
09:58 PM * Lcvette posted a file: atc_broken_in_master.mkv (6453KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/bLCrbSBkWZJyagZpJmTlhZNA >
09:58 PM Lcvette: TurBoss: whe you awake, i made a video of the issue in master
09:58 PM Lcvette: ^^^
09:58 PM Lcvette: night