#hazzy Logs
Jan 16 2020
#hazzy Calendar
12:12 AM TurBoss[m]: ping
12:12 AM TurBoss: pong
12:12 AM TurBoss[m]: \o/
12:12 AM TurBoss[m]: back online
12:21 AM TurBoss[m] is now known as TurBoss4184[m]
12:21 AM TurBoss: ping
12:23 AM TurBoss1: ping
12:24 AM TurBoss1: !discord bridge 587006691162325008 587006691162325013
12:24 AM TurBoss4184[m]: ping
12:24 AM TurBoss: pong
05:23 AM hazzy-m: morning
05:28 AM jthornton: morning
06:54 AM Guido[m]1: back to discord? Yeah:)
09:24 AM Lcvette: ping
09:24 AM Lcvette: pong
09:24 AM Lcvette: \o/
09:24 AM Lcvette: hurray you fixed it!!!
09:28 AM hazzy-m: Hurray!
09:38 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/XGbXTUglPplDEpBJykcfxnHA >
09:38 AM Lcvette: im working on the lathe gui and got this message at launch of the designer
10:35 AM Lcvette: hazzy: is this because its a very old setting_slider code in the py file compare to the new stuff or what?
10:37 AM Lcvette: i would like to work on the lathe screen but im affraid of doing a bunch of work to it and then have it be wasted
10:37 AM Lcvette: lol
10:37 AM Lcvette: i found and fixed the unknown justify property
10:38 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/JfpCEeENnRAWmIywQDPTWTUh >
10:53 AM * Lcvette uploaded an image: Screenshot_2020-01-16_11-45-57.png (249KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/ccstSrIZifgcGTXVWOwIyfdW >
11:01 AM hazzy-m: It lives!
11:01 AM Lcvette: barely
11:01 AM Lcvette: has many issues
11:01 AM Lcvette: lol
11:02 AM Lcvette: where did you get the hal sim files?
11:02 AM Lcvette: is there one for a lathe
11:02 AM Lcvette: 2 axis?
11:28 AM Lcvette: hazzy: ?
11:32 AM Lcvette: turboss o/
11:32 AM Lcvette: do you have a linuxcnc lathe sim hal file?
11:32 AM Lcvette: i deleted mine long ago and don't have them anymore
11:32 AM Lcvette: :(
11:33 AM TurBoss: no
11:57 AM TurBoss: Lcvette: where they in the repo anytime?
12:03 PM hazzy-m: Lcvette: LinuxCNC comes with a lathe sim
12:05 PM hazzy-m: https://github.com/LinuxCNC/linuxcnc/blob/master/configs/sim/axis/lathe.ini
12:12 PM TurBoss: hazzy: when you have some time could you please take a look at the GxVTK stuff ?? only draw path between offsets is missing...
12:27 PM Lcvette: i don't see any hal file there
12:28 PM Lcvette: i find it i think
12:28 PM Lcvette: but it looks like its 3 axis hal file
12:29 PM Lcvette: and the 3 axis sim is giving errors when homing
12:43 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/UCHnGvToAOCvTuoEiSWyvjgo >
12:43 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/kZOKlWKPdnTfQvsVKOKWNTxr >
12:46 PM Lcvette: do i need to change the label for z to joint.1
12:46 PM Lcvette: which is currently Y
12:46 PM Lcvette: ?
12:52 PM Lcvette: so confusing
01:03 PM Lcvette: whatever i try i can't make probe basic lathe work right
01:03 PM Lcvette: :(
01:04 PM Lcvette: can't home it
01:04 PM Lcvette: or it won't start past terminal errors
01:04 PM TurBoss: hmmm
01:07 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/giJyAganODPqrLIPDXRvsHsD >
01:07 PM Lcvette: this is what i get with the basic core sim 3 hal file
01:08 PM Lcvette: from qtpyvcp
01:14 PM TurBoss: brb dev
01:15 PM Lcvette: \o/
01:15 PM Lcvette: hurray!
01:19 PM TurBoss: ok wich branch?¿
01:24 PM * Lcvette uploaded an image: Screenshot_2020-01-16_14-17-17.png (66KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/jPSuOihUFXNpcSAYpqrqwMcI >
01:25 PM Lcvette: TurBoss: lathe_vcp
01:25 PM TurBoss: ok
01:33 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/HFlvYKNbegkVGltwUyCBpbMY >
01:33 PM TurBoss: Lcvette: got this
01:33 PM Lcvette: yes
01:34 PM Lcvette: not sure what that is, wonder if it may be because its not on latest master
01:34 PM TurBoss: oh ok
01:37 PM TurBoss: ```
01:37 PM TurBoss: [qtpyvcp.actions.machine_actions][INFO] Homing all axes (machine_actions.py:639)
01:37 PM TurBoss: [qtpyvcp.actions.machine_actions][INFO] Homing Axis: Z (machine_actions.py:658)
01:37 PM TurBoss: :o
01:37 PM Lcvette: whats that?
01:37 PM TurBoss: i just hit reference all and reference z
01:38 PM TurBoss: but z wasnt referenced with all
01:38 PM Lcvette: i know
01:38 PM Lcvette: same thing im having problems with
01:38 PM Lcvette: not sure what the issue is
01:58 PM Lcvette: any luck?
01:58 PM Lcvette: i got z axis moving suring homing but it doesn't seem to set as home
01:58 PM TurBoss: same
01:59 PM TurBoss: ```
01:59 PM TurBoss: [JOINT_1]
01:59 PM Lcvette: thats Y axis
01:59 PM TurBoss: there is no Y axis
01:59 PM TurBoss: next abailable joint is 1
02:00 PM TurBoss: ini is wrong
02:02 PM TurBoss: anyway same result
02:02 PM TurBoss: :P
02:04 PM Lcvette: i changed mine to include Y axis again
02:04 PM Lcvette: my ini and got the joint numbers all in there correct
02:06 PM TurBoss: ok
02:07 PM Lcvette: \o/ fixed
02:07 PM TurBoss: wooo!!!
02:07 PM Lcvette: but had to go all the way back to using a 3 axis everything
02:08 PM Lcvette: now need to figure the getvalue error
02:08 PM TurBoss: some old sliders
02:08 PM TurBoss: settings sliders
02:09 PM Not-c468: [02probe_basic] 07Lcvette pushed 031 commit to 03lathe_vcp [+2/-2/±2] 13https://git.io/JvTmV
02:09 PM Not-c468: [02probe_basic] 07Lcvette 03e44e02d - fixed lathe config setup back to 3 axis so it would work
02:09 PM Lcvette: yes maybe
02:09 PM Lcvette: there is the pushed revision
02:09 PM Lcvette: i need to go to vehicle inspection now be back in 1.5hrs opr less
02:10 PM Lcvette: i fixed the justify thing too
02:10 PM Lcvette: \o/
02:19 PM TurBoss: bravo
02:44 PM Not-c468: [02probe_basic] 07cofhal starred 03probe_basic - 13https://git.io/JvTY6
03:07 PM hazzy-m: ⭐️
03:07 PM TurBoss: \o/
07:32 PM Lcvette: yo
07:33 PM Lcvette: hazzy: whats the starredmean?
07:33 PM Lcvette: * hazzy: whats the star mean?
07:33 PM Lcvette: ive seen it pop up few times
07:33 PM Lcvette: is that like book marked?
07:34 PM hazzy-m: Somebody stared the repp
07:34 PM Lcvette: also i tried to make a launcher for the probe basic lathe but it doesn't work
07:34 PM hazzy-m: Lol
07:34 PM * Lcvette uploaded an image: Screenshot_2020-01-16_20-27-41.png (41KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/IMWACOBKIJdpPxLdpPCkKkSf >
07:35 PM * Lcvette uploaded an image: Screenshot_2020-01-16_20-28-09.png (40KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/qXkEilHOWwFWTDHzcXeBonIX >
07:35 PM Lcvette: the top one works and launches designer for probe_basic
07:35 PM Lcvette: the bottom one does not launch anything
07:35 PM Lcvette: hazzy?
07:36 PM * Lcvette uploaded an image: Screenshot_2020-01-16_20-29-57.png (118KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/WzbDswTfZJNpuhcLRqDJawfT >
07:37 PM Lcvette: the poath seems correct to the probe_basic_lathe.yml file
07:37 PM Lcvette: and when i do it through edivcp in terminal, i go to the sdame path and it starts fine
07:37 PM Lcvette: any idea why the launcher i made doesn't work?
07:47 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/gVsHlgqXLFRMvhLckbviBlzl >
07:47 PM Lcvette: that error is from me trying to do editvcp probe_basic_lathe in the terminal
07:48 PM Lcvette: hazzy ^^^
08:00 PM * Lcvette uploaded an image: Screenshot_2020-01-16_20-53-46.png (51KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/joMlAdolwggIPRAiitkQggIf >
08:00 PM Lcvette: hazzy ^^^
08:00 PM Lcvette: thats the temrinal message i get
09:18 PM Lcvette: turboss are you on?
09:19 PM Lcvette: whats lathe touch off 2020?
09:19 PM Lcvette: :o
09:20 PM TurBoss: i recovered the qml lathe widget
09:23 PM Lcvette: hurray!!
09:24 PM Lcvette: i forget how it works
09:24 PM Lcvette: lol
09:25 PM Lcvette: im trying to figure the critical error messages in the lathe
09:25 PM Lcvette: not sure what the problem is
09:26 PM Lcvette: i have the latest qtpyvcp checked out
09:26 PM Lcvette: but not fixed
09:30 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/RMYyNWdSSWUFcAVsBGeqVZZY >
09:30 PM Lcvette: think hazzy knows this stuff
09:30 PM Lcvette: where is he?
09:31 PM Tom_L: drinkin with the Germans
09:31 PM Lcvette: damn germans
09:50 PM Lcvette: turboss are you on dev or dueling?
09:50 PM TurBoss: not on dev