#hazzy Logs

Jan 08 2020

04:39 PM TurBoss: yeah probably
04:44 PM TurBoss: you can use Kdiff or meld to compare directorieds too
04:46 PM * Lcvette uploaded an image: Screenshot_2020-01-08_17-39-50.png (13KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/FICymvZWTmAWpCxvVamvuAJu >
04:46 PM Lcvette: maybe this?
04:47 PM Lcvette: turboss or hazzy?
04:47 PM Lcvette: its in the dev/probe_basic folder
04:47 PM TurBoss: should not affect
04:55 PM TurBoss: http://dpaste.com/01CW62D
04:58 PM Lcvette: turboss what that?
04:58 PM TurBoss: error i got
04:59 PM Lcvette: where is the vcp launcher file?
05:00 PM TurBoss: qtpyvcp/vcp_launcher.py
05:05 PM Lcvette: :(
05:05 PM Lcvette: lcvette needs brain power
05:05 PM Lcvette: coffee!!!
05:05 PM Lcvette: :D
05:18 PM TurBoss: \o/
05:19 PM TurBoss: Lcvette: I fixed!
05:19 PM Lcvette: You did it?
05:19 PM Lcvette: \o/
05:19 PM TurBoss: wan't me to commit
05:19 PM Lcvette: What was it?
05:19 PM Lcvette: Yes please
05:20 PM TurBoss: i have most of your changes
05:22 PM Not-c468: [02probe_basic] 07TurBoss pushed 031 commit to 03lathe_vcp [+5/-5/±3] 13https://git.io/JveF4
05:22 PM Not-c468: [02probe_basic] 07TurBoss 03bb7e2e1 - fix lathe vcp loading
05:23 PM Not-c468: [02probe_basic] 07Lcvette created branch 03lathe_vcp 13https://git.io/JveF0
05:24 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/fuHDYiSSJdzUebiZwWKqLPYE >
05:24 PM Lcvette: :o
05:24 PM TurBoss: :o
05:24 PM TurBoss: :)
05:25 PM TurBoss: oh I tested with xyzab
05:26 PM TurBoss: base_widget something @házzy said
05:37 PM roguish[m]: GOOD GRIEF. you guys have been busy today...........................
05:38 PM TurBoss: :)
05:39 PM * TurBoss uploaded an image: image.png (268KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/WetutxLPoSUMBxgBtDDXsaJS >
05:39 PM TurBoss: Lcvette: !!
05:42 PM TurBoss: for some reason it creates the hal pins with a tailng -2 :/
05:42 PM TurBoss: maybe because is the second vcp in probebasic package
05:43 PM Not-c468: [02probe_basic] 07TurBoss pushed 031 commit to 03lathe_vcp [+0/-0/±1] 13https://git.io/Jvebm
05:43 PM Not-c468: [02probe_basic] 07TurBoss 03f688929 - for some reason it adds a 2 to pin names
05:53 PM Lcvette: im back sorry
05:53 PM Lcvette: had to clean up cat poop
05:53 PM Lcvette: :(
05:53 PM Lcvette: TurBoss: back
05:53 PM TurBoss: :P
05:54 PM Not-c468: [02probe_basic] 07Lcvette created branch 03lathe_vcp 13https://git.io/Jvebr
05:55 PM Lcvette: i tried to make a lather hall config
05:55 PM Lcvette: * i tried to make a lathe hal config
05:55 PM Lcvette: so it could have issues
05:55 PM TurBoss: i pushed
05:55 PM Lcvette: i changed many of the hal files
05:55 PM TurBoss: ficed
05:55 PM Lcvette: you fixed the hal files?
05:55 PM TurBoss: only timer
05:55 PM Lcvette: oh, timer was not one i changed
05:56 PM TurBoss: okay
05:56 PM roguish[m]: Lcvette: check it out. https://youtu.be/8ZQhPorT_WE
05:56 PM roguish[m]: go to the middle .
05:56 PM roguish[m]: my 'shuffle' drilling.
05:58 PM Lcvette: roguish: nice!
05:58 PM Lcvette: whose vf4?
05:58 PM Lcvette: nice sized machine!
05:59 PM roguish[m]: my client's
06:00 PM roguish[m]: 50 in X travel. but I drill long tracks. so far the longest is 216 inches.
06:01 PM roguish[m]: just use a pin to move the track. the tool change is pretty slow, but I don't know any other method.
06:01 PM TurBoss: necromancing widgets \o/
06:01 PM * TurBoss uploaded an image: image.png (132KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/xiQxFIhTpCIfgcsiPwUqOtUq >
06:02 PM * Lcvette uploaded an image: Screenshot_2020-01-08_18-54-33.png (250KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/INgfoHSXqXnOeKzaXiTcbdmD >
06:02 PM Lcvette: \o/
06:02 PM Lcvette: lol
06:02 PM Lcvette: i missed looking at this screen its one of my favorites
06:02 PM Lcvette: :D
06:02 PM Lcvette: Hurray!
06:02 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/YXzMeMDYNrpOJiclDGSaMQXs >
06:02 PM Lcvette: still many errors
06:02 PM TurBoss: yup
06:03 PM * TurBoss uploaded an image: image.png (316KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/zFhbbjhtdSLeAJFasNCaCyCt >
06:03 PM Lcvette: :o
06:05 PM Lcvette: now i can't open designer
06:05 PM Lcvette: :o
06:05 PM TurBoss: ops
06:05 PM TurBoss: xD
06:06 PM TurBoss: does it crash or something?
06:06 PM Lcvette: gives me like 20 error messages then just stays blank
06:06 PM TurBoss: mine just goes off
06:07 PM TurBoss: no errors
06:07 PM Lcvette: oh it opened but took forever
06:07 PM TurBoss: oh i got the same error as before the video card error
06:08 PM Lcvette: :o
06:09 PM Lcvette: now my other designer for the mill version is not opening
06:09 PM Lcvette: something is busted
06:09 PM Lcvette: lol
06:09 PM Lcvette: oh it opened
06:09 PM Lcvette: but took like 3 minutes
06:09 PM TurBoss: mine works
06:09 PM TurBoss: wich doesn't is the lathe editor
06:10 PM TurBoss: ```
06:10 PM TurBoss: editvcp probe_basic_lathe
06:10 PM Lcvette: both of mine opened
06:10 PM Lcvette: but they took forever
06:11 PM Lcvette: not fast like before
06:16 PM TurBoss: seems that uninstaller removes the font
06:19 PM Lcvette: :o
06:19 PM Lcvette: is there a way to track down the errors that are in the temrinal?
06:20 PM Lcvette: * is there a way to track down the errors that are in the terminal?
06:20 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/GvjtsNcVmqpsZLIgqcnECoPh >
06:21 PM Lcvette: yes
06:21 PM TurBoss: says some setting slider has a bad text
06:21 PM * Lcvette uploaded an image: Screenshot_2020-01-08_19-14-08.png (54KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/CPshRaitpcGPlwJbDAkTIVHn >
06:21 PM TurBoss: 😕
06:22 PM Lcvette: to open designer for lathe i have to do editvcp
06:22 PM Lcvette: then go to the probe_basic_lathe.yml file and choose it
06:22 PM TurBoss: ok I try that
06:23 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/UyvnBMfsoTOvzxIDfCLBnbDp >
06:24 PM Lcvette: whats that?
06:24 PM TurBoss: the error I get
06:24 PM TurBoss: ☹️
06:25 PM hazzy-m: I'll be back at the hotel soon, will boot Linux and see if I can help
06:25 PM Lcvette: i wonder if the slider error is because they are actionslider vs vcpsettingslider
06:25 PM Lcvette: thanks hazzy!
06:25 PM Lcvette: this has been rough
06:25 PM Lcvette: lol
06:34 PM Lcvette: i tried going back to master and now my designer is stll gaving issues
06:34 PM Lcvette: im affraid something got screwed up now
06:34 PM Lcvette: :(
06:35 PM Lcvette: feel like puking
06:35 PM Lcvette: :(
06:42 PM TurBoss: got designer to work
06:42 PM TurBoss: by loadin the ui file
06:42 PM Lcvette: You did, opens fast or slow?
06:42 PM TurBoss: normal
06:42 PM Lcvette: Wonder what's wrong on mine
06:47 PM roguish[m]: ok, cocktail time........ rum and tonic w/ lime
07:07 PM Lcvette: o/
07:07 PM Lcvette: oh shit
07:07 PM hazzy-m: yo
07:08 PM hazzy-m: so what is the problem?
07:08 PM Lcvette: wrong box
07:08 PM Lcvette: lol
07:08 PM hazzy-m: ha
07:08 PM Lcvette: not sure anymore
07:08 PM Lcvette: so much has changed
07:08 PM Lcvette: lol
07:08 PM hazzy-m: what did you do that cuased the problem?
07:08 PM Lcvette: that im not sure
07:08 PM hazzy-m: PB Lathe?
07:08 PM Lcvette: :(
07:08 PM hazzy-m: and now PB mill does not work?
07:08 PM Lcvette: yes initially, but now even when going back to master the designer is very slow to open
07:09 PM Lcvette: like 3 minytes
07:14 PM Lcvette: then it finally opens
07:14 PM hazzy-m: is LCNC running when you open designer?
07:14 PM hazzy-m: (it should not be)
07:14 PM Lcvette: no
07:14 PM hazzy-m: when you start it with --log-level DEBUG what step does it show its hanging on?
07:14 PM Lcvette: im restarting just to make sure its not running on a hidden workspace or something
07:14 PM hazzy-m: it should print times to the terminal
07:14 PM Lcvette: as soon as you said that i emembered that sometimes the lcnc was running hidden
07:14 PM Lcvette: my stupid desktop setup
07:14 PM Lcvette: hides things when they get minimized sometimes
07:14 PM hazzy-m: try it again and make sure LCNC is not running and see if that helps
07:16 PM Lcvette: in the lathe branch i get a tone of those errors
07:17 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/IWJhsJhInkAHdOIcXVPOvAhU >
07:17 PM Lcvette: there is the terminal when designer loads
07:18 PM Lcvette: and this is what i get when loading the sim for lathe
07:18 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/r0/download/matrix.org/ucOkgYuLAlSPGPFqzlwWFZmH >
07:18 PM Lcvette: hazzy^^^
07:28 PM hazzy-m: Lcvette: these errors are cause by changes to the widgets since you made the lathe VCP
07:29 PM hazzy-m: its probably just one or two widgets that are causing all the errors
07:29 PM hazzy-m: looks like the settings slider is the main culprit
07:30 PM Lcvette: I am not sure how to resolve?
07:30 PM Lcvette: I actually copied over the sliders from the updated probe basic initially thinking that was the issue as well, bit it did not resolve
07:33 PM Lcvette: hazzy: ^^^
07:37 PM Lcvette: hazzy: still here?
07:38 PM * Lcvette uploaded an image: Screenshot_2020-01-08_20-31-43.png (41KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/CgblWhJVSvZwQVtauvOMnSLB >
07:38 PM Lcvette: im trying to setup a quick launcher for the probe_basic_lathe designer
07:39 PM Lcvette: but it doesn't work
07:39 PM Lcvette: do you know what imay be missing?
11:04 PM Lcvette: Hazzy or turboss, is there a sick core Sim 2 Hall file for lathe? I'm not sure I edited the one I made correctly and would like to compare
11:09 PM Lcvette: <Lcvette "Hazzy or turboss, is there a sic"> Stock*