#hazzy Logs

Nov 05 2019

05:11 AM TurBoss: morning
05:13 AM Tom_L: morning
05:14 AM jthornton: morning
05:21 AM TurBoss: jthornton: a ini or yaml option is fine to disable notification popups?
05:22 AM jthornton: aye
05:24 AM TurBoss: I will make 3 options
05:25 AM TurBoss: disabled / dbus / native qt
05:33 AM jthornton: great
06:24 AM hazzy-m: Morning
07:57 AM Wandoo1980|Sebas: Morning 🙂
08:08 AM roguish[m]: good morning from the far out west .....
12:20 PM Roguish: looks like the riot is down.....
02:05 PM roguish[m]: back up.....
05:37 PM * hazzy-m uploaded an image: ima_2f617c3.jpeg (156KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/GQQYZzehumxTqlArEMPgYwTo >
05:38 PM hazzy-m: Tormach got their machines in today
05:38 PM Tom_L: fun
05:38 PM hazzy-m: Didn't know they made a CNC router
05:39 PM * hazzy-m uploaded an image: ima_1e63e52.jpeg (60KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/LGMEPDMpwfJtYGuezcjyoWpR >
05:39 PM Tom_L: or a disguise box
05:39 PM * hazzy-m is doing some spying lol
05:40 PM Tom_L: aircraft mfg put fake windows etc on their planes when they test fly so they can't tell what they are
05:41 PM hazzy-m: That's a great idea
06:06 PM jthornton: getting setup at the show?
06:15 PM Tom_L: JT, saw the spreadsheet video
06:15 PM Tom_L: got it drawing stuff yet?
06:16 PM jthornton: no, but that's easy... just trying to think up what I want to draw using the spreadsheet to drive the model
06:20 PM Tom_L: i did a simple hydraulic cylinder for fun
06:23 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/practice_drawings/Cylinder.jpg
06:23 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/practice_drawings/Master%20Design%20Table.txt
06:25 PM Tom_L: something easy to experiment with
06:31 PM jthornton: yea I was thinking of some aircraft looking part with a web
06:32 PM Tom_L: i was doing cylinders for another exercise so i just used one and added a table to it
06:34 PM Tom_L: one problem was a hdd
06:36 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/practice_drawings/Arm_assembly.jpg
06:36 PM Tom_L: that was the arm exercise
06:43 PM jthornton: that looks fun
06:43 PM Tom_L: getting all the constraints to work right was
06:44 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/practice_drawings/HDD.jpg
06:54 PM Tom_L: the instructor had previously done a doll house that was completely function driven. by changing one parameter the whole thing would be re'scaled and fully constrained
06:54 PM Tom_L: it took him a while to get it right
06:54 PM jthornton: I bet
06:59 PM jthornton: tripped over myself today and spilled a cup or so of oil based primer trying to paint my trailer
06:59 PM Tom_L: that sucks
07:00 PM Tom_L: did you rebuild the undercarriage on it?
07:00 PM Tom_L: i forget what you were doing to it
07:00 PM jthornton: no, just cleaned it up a bit and fixed a few things then primed and painted and painted the new boards
07:08 PM Tom_L: have you looked at the path workbench any on freecad yet?
07:08 PM jthornton: no not yet
07:10 PM Tom_L: just a quick glance looks like it's further along than i figured
07:11 PM Tom_L: outputs several machine formats
07:11 PM jthornton: cool
07:11 PM jthornton: putting together a tiny whoop 75mm quad lol
07:12 PM Tom_L: centroid, comparams, dynapath, grbl, linuxcnc, opensb, philips, rml and smoothie
07:12 PM jthornton: quite a few
07:12 PM Tom_L: yeah
07:12 PM Tom_L: if they work
07:13 PM Tom_L: grbl-g81
07:13 PM Tom_L: must be a drill cycle?
07:13 PM Tom_L: i don't think grbl had any custom cycles
07:14 PM Tom_L: you can import a tool table but not linuxcnc's
07:57 PM Not-5e4d: [02qtpyvcp] 07TurBoss pushed 031 commit to 03NotificationTweaks [+1/-1/±2] 13https://git.io/Jeaqo
07:57 PM Not-5e4d: [02qtpyvcp] 07TurBoss 03fad9ccb - allow to disable notification popups from yaml