#hazzy Logs

Oct 28 2019

05:08 AM TurBoss: morning
05:33 AM jthornton: Lcvette, get a RMA from Mesa for the 7i77
05:35 AM Tom_L: hey
05:36 AM jthornton: morning
05:36 AM Tom_L: out at 3 chaning a flat on my kids car
05:37 AM jthornton: wtf
05:37 AM Tom_L: ran over a nail i guess
05:37 AM Tom_L: we didn't discuss it much, he was on the way to work
05:37 AM jthornton: the honda insight doesn't even have a compact spare
05:38 AM Tom_L: yeah some cars don't have spares anymore
05:38 AM jthornton: he goes to work at 3am?
05:38 AM Tom_L: i don't trust runflats eitehr
05:38 AM Tom_L: well, he gets up then
05:38 AM Tom_L: closer to 4 i guess when he called
05:39 AM jthornton: and yea that does suck, wife ran over something the other day and put a 1" gash in the sidewall
05:39 AM Tom_L: i remember that
05:39 AM jthornton: gotta find spare to fit
05:40 AM jthornton: honda has a part number but no stock
05:40 AM Tom_L: i would
05:40 AM jthornton: we took the insight to the outer banks, get a flat out there and your screwed if you can't fix it yourself
05:45 AM Tom_L: i bet
05:49 AM jthornton: I think a civic has the same spare tire kit so I'm going to check auto salvage yards in the area
05:49 AM Tom_L: she's looking at civics so i'll be sure to check for a spare
05:50 AM Tom_L: is there a place to put one?
05:50 AM jthornton: yea and it has an air pump in that space
05:50 AM Tom_L: i know new bmw's don't come with em
05:51 AM Tom_L: heh
05:51 AM jthornton: it even has the place to tie it down
05:51 AM Tom_L: just one less expense for the mfgs
05:53 AM Tom_L: i tested both the 7i80 & 7i92 on the mb nic and both work
09:50 AM Lcvette: jthornton: I broke it
10:31 AM Lcvette: at least i think i must have
10:32 AM Lcvette: the timing of the failure is too convenient
10:32 AM Lcvette: i also tested and the whole 8 block of inputs is out TB& pins 9-16 have no response in halshow/watch
11:00 AM jthornton: Lcvette, email mesa for a RMA on it if it is less than 2 years old
11:09 AM Lcvette: jthornton: older than 2 years, even though I didn't use it until last year it past the 2 year date
11:11 AM jthornton: it won't hurt to email Mesa with the serial number of the board and ask if Peter can look at it
12:52 PM Tom_L: ok, that cost me a tire
12:54 PM jthornton: seems to be going around, what did you do?
12:54 PM Tom_L: kid's tire
12:54 PM Tom_L: ran a nail or something in but it came out the sidewall
12:55 PM jthornton: ouch
01:02 PM Tom_L: supposed to snow sometime this week
01:02 PM Tom_L: glad this happened before that
01:14 PM Tom_L: yay card works
03:09 PM JT-Shop: got the vacuum device ready for another test tomorrow...
03:10 PM JT-Shop: 400°F silicone rubber gasket
04:00 PM * JT[m] uploaded an image: VectorImage_2019-10-28_035243.jpg (32KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/CgvPZQkbnTZqAtIKAKiPTWKF >
04:25 PM Tom_L: plastic blade?
04:26 PM Tom_L: you been cutting 2x material with that...
05:02 PM JT-Shop: the saw stop brake works
05:03 PM JT-Shop: saved my tape measure from getting cut in two..
05:28 PM Guido[m]: Sorry for your loss:/ - guess the tape measure was a fraction of blade an brake?...
05:33 PM hazzy-m: Hope that was an expensive or sentimental tape measure
05:34 PM jthornton: no, it was worn out and floppy and I've been meaning to replace it for months...
05:34 PM jthornton: tape measure only got a nick
06:36 PM Lcvette: hazzy: what you did last night?
06:36 PM Lcvette: i see new commits
06:36 PM Lcvette: \o/