#hazzy Logs
Oct 25 2019
#hazzy Calendar
08:15 AM Lcvette: morning!
08:15 AM Lcvette: \o/ its a beautiful day
08:26 AM JT-Shop2: rain here
08:33 AM Lcvette: Cold rain?
08:43 AM JT-Shop2: not yet
12:20 PM Lcvette: so do any of you know how i can measure the spindle load and send it to the mesa card in a 0-5v signal?
12:29 PM Tom_L: the spindle control doesn't have feedback does it?
12:29 PM Lcvette: the drive?
12:29 PM Lcvette: no
12:29 PM Lcvette: unfortunately it doesn't
12:31 PM Tom_L: https://www.precision-elec.com/lenze-smv-training-lesson-10-motor-feed-monitoring-inputs-outputs-2/
12:31 PM Tom_L: may not help
12:49 PM jthornton: a current transducer
12:50 PM Tom_L: there was something about reading the frequency vs voltage too but that would probably be harder to calculate
01:13 PM Lcvette: yeah that is what i was thinking as well
01:14 PM Lcvette: its a combination of voltage, amps, frequency to come up with the load of the motor
01:15 PM Lcvette: i see alot of curent transducers with 4-20mA outputs and found this:
01:16 PM Lcvette: https://www.ebay.com/itm/4-20mA-0-5V-Voltage-Current-Transmitter-Isolation-Signal-Converter-Module/132737852736?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D60695%26meid%3D3c4a2c10ea8b4eebae7e9ded6df7bac2%26pid%3D100005%26rk%3D3%26rkt%3D12%26mehot%3Dpf%26sd%3D122513767877%26itm%3D132737852736%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851
01:16 PM Lcvette: https://www.ebay.com/itm/4-20mA-0-5V-Voltage-Current-Transmitter-Isolation-Signal-Converter-Module/132737852736
01:17 PM Lcvette: which i think can then be sent to the mesa on an analog input
01:21 PM Wandoo1980|Sebas: Greetings from Bremen, Germany 😁
01:22 PM * Wandoo1980|Sebas uploaded an image: IMG_20191025_200946.jpg (3588KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/IjUSwKazoOYojgyDqjvcfFxb >
01:22 PM * Wandoo1980|Sebas uploaded an image: IMG_20191025_201422.jpg (3916KB) < https://matrix.org/_matrix/media/r0/download/jauriarts.org/MBwutbXBERpwYIqgRJWapqTu >
01:22 PM Lcvette: https://www.ebay.com/itm/AC-4-20mA-Current-Transmitter-Closed-Loop-Current-Sensor-Transducer-1-In-Out1-/282996864255
01:22 PM Lcvette: Wandoo1980 | Sebastian | End-CNC: beautiful!
01:24 PM Wandoo1980|Sebas: I've tested the new version today 😁
01:24 PM Wandoo1980|Sebas: Love it!!!
01:25 PM Lcvette: \o/
01:26 PM Lcvette: if you get an error message when trying to zero all
01:26 PM Lcvette: let me know
01:26 PM Lcvette: i have the fix
01:26 PM Lcvette: i think it gives bad character a or bad character b
01:26 PM Lcvette: its the button command is asking to zero the a and b axis
01:27 PM Wandoo1980|Sebas: I have seen that you also have fixed the issue with the long messages in the pop ups 😍
01:28 PM Wandoo1980|Sebas: Oh okay. If i have the error i will report it 😁
01:28 PM Lcvette: turboss must have fixed
01:29 PM Lcvette: \o/
01:29 PM Wandoo1980|Sebas: I haven't a problem with this yet
01:29 PM Lcvette: hurray!
01:29 PM Wandoo1980|Sebas: And i didn't have an a or b axis
01:30 PM Wandoo1980|Sebas: But the fourth axis comming soon 😁
01:30 PM Lcvette: ok
01:30 PM Lcvette: maybe i changed the button
01:30 PM Lcvette: i forget
01:31 PM * Lcvette uploaded an image: Screenshot_2019-10-25_14-25-31.png (38KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/jbzQpqSjnTeQkMHTLoPKQfcz >
01:32 PM Wandoo1980|Sebas: Hehe, i see 😅
01:32 PM Lcvette: if you do get an error message, in dersigner you can select the sero all button and in the mdicommand line you juust delete the axis's you don't need
01:33 PM Lcvette: G10 L20 P{ch[0]} X0.0 Y0.0 Z0.0 A0.0 B0.0
01:33 PM Lcvette: G10 L20 P{ch[0]} X0.0 Y0.0 Z0.0
01:33 PM Wandoo1980|Sebas: Okay, that's not so complicated 😁
01:33 PM Lcvette: like so
05:13 PM Lcvette: o/
05:13 PM Lcvette: hey hazzy
05:19 PM hazzy-m: o/
05:19 PM hazzy-m: Sitting on the runway
05:20 PM hazzy-m: Was supposed to leave at 5:16, looking like another 30min :(
05:20 PM Lcvette: when you get a chance, i need some help
08:43 PM Tom_L: Lcvette, fwiw i ran your install instructions from start to finish just fine
08:44 PM Lcvette: \o/
08:44 PM Lcvette: Hurray!
08:45 PM Tom_L: did a fresh install of debian 9
08:46 PM Lcvette: yeah, not sure why the other guy had problems yesterday
08:48 PM Lcvette: where is the turboss?
08:48 PM Tom_L: not here
08:51 PM * Lcvette uploaded an image: IMG_20191025_214437.jpg (862KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/sOHhLFpjSnqGaEBgsEeRAfTR >
08:52 PM Lcvette: wiring schematic for the new wireless probe
08:53 PM Lcvette: wonder if the TB7 Pin 4 is arbitrary
08:54 PM Tom_L: yes
08:55 PM Tom_L: what's that header from?
08:56 PM Lcvette: header?
08:57 PM Tom_L: j?
08:57 PM Lcvette: you mean the wireless receiver box for the probe?
08:57 PM Lcvette: maybe he means jumper?
09:32 PM Lcvette: Tom_L (@freenode_Tom_L:matrix.org): 7i77 TB7
09:33 PM Lcvette: Think a 5k1 resistor is ok to use?
09:33 PM Lcvette: Closest that is in my kit
09:40 PM Tom_L: probably
09:41 PM Tom_L: what's the schematic say?
10:00 PM Lcvette: 5k
10:01 PM Tom_L: so 5.1k?
10:01 PM Tom_L: should be ok
10:01 PM Tom_L: 4.7 would too for that matter
10:02 PM Tom_L: always a pita setting up a new ssd
10:05 PM Tom_L: just about back where i was 3 hrs ago
10:12 PM Tom_L: now to the ethernet for the mill...
10:51 PM Lcvette: Ethernet?
10:52 PM Lcvette: Doesn't load driver's with update?
10:54 PM * Lcvette uploaded an image: IMG_20191025_234733725.jpg (127KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/EGfHakeqiewtrhlhGVPwpbYg >
10:54 PM * Lcvette uploaded an image: IMG_20191025_234741037.jpg (122KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/vTicpCTKOTLjGLmyaDqYnaVn >
10:55 PM Lcvette: Got the receiver mounted
10:56 PM Lcvette: And wire routed
10:56 PM Lcvette: Does the direction of the resistor make a difference?
10:56 PM Lcvette: Tom_L (@freenode_Tom_L:matrix.org): ^^^
10:57 PM Tom_L: no
10:57 PM Lcvette: Great