#hazzy Logs

Oct 22 2019

11:23 AM JT-Shop2: 60 square feet down to 16 square feet
04:14 PM Tom_L: JT-Shop, pretty good compression ratio
04:39 PM JT-Shop: yea, did the photo come through?
04:40 PM Tom_L: no
04:40 PM Tom_L: not that i noticed anyway
04:48 PM JT-Shop2: link between freenode and riot must be broken
04:50 PM Tom_L: i think riot was acting up today
04:52 PM JT-Shop2: I can upload photos on the phone to riot without using my data
05:01 PM JT[m]: Ok thanks
05:02 PM Tom_L: i can see it on matrix but not here
05:03 PM JT-Shop2: hmm I just showed up here
05:05 PM JT[m]: Test
05:08 PM Tom_L: still lagging to irc
05:10 PM Lcvette: pass
05:10 PM Lcvette: test
05:10 PM Lcvette: :D
05:35 PM JT-Shop2: 9 more square feet of floor cleared up
05:38 PM Tom_L: message never made it to riot
05:38 PM Tom_L: not here anyway
05:48 PM Tom_L: JT-Shop, is there any new documentation on 2.8 with dual gantry steppers?
05:56 PM jthornton: not that I know of the dual homing setup has been in the docs since it was introduced
05:56 PM Tom_L: do you know where to find it?
06:06 PM jthornton: yes, the ini section for joints
06:07 PM jthornton: it takes exactly two things to enable gantry homing, 2 or more joints with the same home sequence and at least on is a negative
06:07 PM Tom_L: i found the bit on homing
06:07 PM jthornton: one is
06:08 PM jthornton: that's all there is to it
06:08 PM Tom_L: ok
06:08 PM jthornton: Monique snuck out last night before the door went down and spent the night in the run
06:09 PM Tom_L: PARTY!
06:10 PM jthornton: I think someone is picking on her and she is molting so not in the mood for it
06:10 PM Tom_L: ahh
06:18 PM * jthornton watches Monique on the camera and she goes WTF I can't get into the nest box
06:30 PM jthornton: have you done any video editing?
06:32 PM Tom_L: no not really
06:32 PM jthornton: I'm learning how to edit my footage from the phantom
06:33 PM Tom_L: i've got some good slideshow software but haven't done any video editing for a long time
06:35 PM Tom_L: don't even recall what software i had at the time
06:35 PM jthornton: checking out Flowblade it's linux open source
06:35 PM Tom_L: takes a decent machine though
06:36 PM jthornton: been uploading raw footage but it sucks a bit so trying to edit it
06:40 PM Tom_L: takes a long time to render
06:40 PM Tom_L: sometimes had trouble sync'ing the sound/video but you probably don't have sound
06:41 PM jthornton: yea, seems so a 2 minute clip takes 12 minutes to render
06:42 PM jthornton: Monique kicked the door open and went into the nest box lol
06:47 PM Tom_L: does flowblade sync audio video?
06:47 PM jthornton: guess I need to watch some videos on rendering in the morning
06:47 PM jthornton: yea
06:47 PM Tom_L: says it does..
06:48 PM Tom_L: the stuff i used was windows based and it's old now
06:48 PM jthornton: watched a couple of tutorials on it and it seems to be ok
06:48 PM Tom_L: https://www.google.com/search?q=linux+video+editing+software&ie=utf-8&oe=utf-8&client=firefox-b-1
06:48 PM Tom_L: top 10...
06:48 PM Tom_L: dunno
06:49 PM * jthornton does not click links until data is in line
06:49 PM Tom_L: #1. Kdenlive
06:49 PM Tom_L: #2. Shotcut.
06:50 PM Tom_L: #3. Pitivi.
06:50 PM Tom_L: #5. Blender.
06:50 PM Tom_L: #6. Cinelerra.
06:50 PM Tom_L: #7. LiVES
06:50 PM Tom_L: #8. Open Shot.
06:50 PM Tom_L: #9. Flowblade.
06:50 PM Tom_L: 4 was missing
06:51 PM jthornton: yea kdenlive is kde and very bloated
06:51 PM jthornton: blender is not really a video editor
06:51 PM jthornton: not seen lives or cinelerra
06:51 PM Tom_L: i don't know anything about any of them
06:52 PM Tom_L: but flowblade ranked 9
06:52 PM jthornton: I have shotcut but not tried it yet
06:53 PM Tom_L: #4. Avidemux
06:53 PM jthornton: chow time
06:53 PM Tom_L: wasn't in the original list
06:54 PM Tom_L: the slideshow stuff i have will sync audio to slides
06:54 PM jthornton: I will check them out in the morning
06:54 PM Tom_L: it might do short video clips... haven't tried it
06:54 PM Tom_L: but it was $$
06:54 PM jthornton: thanks for the list
06:54 PM Tom_L: she did photo editing for a while
06:55 PM Tom_L: yup
06:56 PM Tom_L: i'd also ask skunkworks what he uses
06:56 PM Tom_L: maybe just yt editor i dunno
07:07 PM Lcvette: TurBoss: are you still with robots?
07:09 PM TurBoss: no
07:09 PM Lcvette: are you with matric stuff?
07:09 PM Lcvette: matrix
07:28 PM TurBoss: sorry Lcvette was having the nap didn't had yesterday
07:28 PM TurBoss: :P
07:29 PM Lcvette: \o/ siesta time!
07:30 PM TurBoss: fiesta?¿
07:30 PM Lcvette: siesta
07:30 PM Lcvette: sleep
07:30 PM Lcvette: nap
07:32 PM TurBoss: ya xD joking
07:41 PM TurBoss: https://www.youtube.com/watch?v=WS2Zqcu4Duo
07:45 PM Lcvette: lcbvette can't understand what he is saying
07:45 PM Lcvette: * lcvette can't understand what he is saying
07:45 PM TurBoss: ja
07:45 PM TurBoss: :D
07:50 PM Lcvette: i will translate!
07:50 PM Lcvette: he is saying Probe Basic is Awesome and cool and the best user interface ever and he want to thank lcvette, turboss and hazzy for making it possible and nominate us for a Nobel prize
07:51 PM TurBoss: \o/
07:51 PM hazzy-m: Hurray!
07:51 PM Lcvette: \o/
07:51 PM TurBoss: jojojoj
07:51 PM Lcvette: Hurray
07:51 PM * TurBoss is having dificulties to pick the correct signal
07:52 PM Lcvette: what signal?
07:52 PM TurBoss: update_g5x_offset
07:52 PM TurBoss: internal signal
07:53 PM Lcvette: he also says that probe basic would be awesome if hazzy could finish the persistent boxes for us
07:53 PM Lcvette: lol
07:53 PM Lcvette: \o/
07:53 PM TurBoss: xD
07:53 PM TurBoss: if i manage to finish the vtk stuff
07:53 PM TurBoss: i will take a look
07:54 PM hazzy-m: Lcvette: they are done
07:54 PM hazzy-m: I added one to Probebasic
07:54 PM Lcvette: hazzy: :o
07:54 PM hazzy-m: but havent hat time to do the rest
07:54 PM TurBoss: jo just test?
07:54 PM TurBoss: * so just test?
07:54 PM Lcvette: need a tester?
07:55 PM TurBoss: silent hazzy
07:55 PM Lcvette: i can test persistent boxes and VTK
07:57 PM * hazzy-m sorry for not being very active, but I'm exahuseted ☹️ got sick in PA, left at 4am sunday and to unload trucks and do custermer demos mon tues, one more demo tomorrow and then have to go to KY to take care of a badish situation there
07:58 PM TurBoss: hero!
07:58 PM hazzy-m: the show was a lot of fun though!
07:59 PM TurBoss: hazzy: for president
07:59 PM hazzy-m: lol
07:59 PM * hazzy-m would be a terible presiten :D
08:00 PM TurBoss: :D
08:00 PM Lcvette: sorry you aren't feeling well hazzy
08:01 PM Lcvette: hope you get better soon
08:02 PM Lcvette: to much open bar..lol
08:28 PM Lcvette: hazzy: you added one to probe basic?
08:28 PM Lcvette: TurBoss: you need a signal?
08:28 PM Lcvette: from the g5x buttons?
08:28 PM TurBoss: figured that part
08:29 PM Lcvette: lcvette wants to know how he can help
09:02 PM * TurBoss goes to bed
09:02 PM TurBoss: night
09:07 PM Lcvette: night
09:12 PM Tom_L: night