#hazzy Logs

Oct 18 2019

05:11 AM Tom_L: hey
07:22 AM TurBoss: heyo
07:28 AM hazzy-m: Yo
07:30 AM TurBoss: sup hazzy ?
07:43 AM hazzy-m: TurBoss: not much, eating breakfast on the 25th floor
07:43 AM TurBoss: profit
08:20 AM Lcvette: <hazzy-m "TurBoss: not much, eating breakf"> Hazzy enjoying the good life
08:21 AM Lcvette: \o/
08:21 AM Lcvette: Did you get a special massager from the house masseuse
08:21 AM TurBoss: morning @lcvette:matrix.org
08:24 AM Lcvette: TurBoss (@TurBoss:matrix.org): morning
08:25 AM Lcvette: Uh oh matrix is acting buggy again
08:25 AM Lcvette: \o/
08:37 AM Lcvette: ?
08:37 AM Lcvette: im rubbing your code
08:37 AM Lcvette: Tom_L:
08:37 AM Lcvette: ?
08:38 AM Tom_L: what!
08:38 AM Lcvette: What?
08:38 AM Lcvette: I did not write that
08:38 AM Tom_L: <Lcvette> Tom_L:
08:38 AM Tom_L: you did
08:39 AM Tom_L: or you have a ghost
08:39 AM Lcvette: I did bot
08:39 AM Lcvette: Not
08:39 AM Lcvette: Think it was from carrying the phone and laptip
08:39 AM * Tom_L blames TurBoss anyway
08:40 AM TurBoss: hurray!
08:40 AM Lcvette: It's hazzy fault
08:40 AM Tom_L: bye
08:40 AM Lcvette: matrix is quite busted
08:40 AM Tom_L: i don't use it much
08:41 AM Tom_L: irc is mostly reliable
08:41 AM Lcvette: it has not had this many problems so frewquently ever before since ive been using it
08:59 AM Lcvette: TurBoss: is matrix working again?
09:00 AM TurBoss: it dos
09:00 AM Lcvette: \o/
09:00 AM TurBoss: * it does
09:19 AM Lcvette: TurBoss: did you see this issue i posted?
09:19 AM TurBoss: where
09:19 AM * Lcvette uploaded an image: Screenshot_2019-10-17_19-35-22.png (24KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/RToPBaKeJJZtMaGhidrlkKXg >
09:20 AM TurBoss: yes
09:20 AM TurBoss: i saw
09:20 AM Lcvette: the tool was in the wrong place height wise
09:20 AM Lcvette: was underneath the parts tool path
09:20 AM Lcvette: ok
09:20 AM Lcvette: but is that in the tool length offset or vtk
09:21 AM Lcvette: ?
09:21 AM Lcvette: i guess it doesn't matter the tlo should be taken into consideration
09:21 AM Lcvette: so is in vtk
09:21 AM TurBoss: yes
09:22 AM TurBoss: I have a commit
09:22 AM TurBoss: would you like to test?
09:22 AM Lcvette: yes!
09:22 AM Lcvette: \o/
09:22 AM Lcvette: whoo hoo
09:22 AM Lcvette: lcvette likes testing commits
09:24 AM Not-5e4d: [02qtpyvcp] 07TurBoss pushed 032 commits to 03VtkGx [+0/-0/±2] 13https://git.io/JeBt2
09:24 AM Not-5e4d: [02qtpyvcp] 07TurBoss 033c9576f - store program origins
09:24 AM Not-5e4d: [02qtpyvcp] 07TurBoss 03f4ff9a3 - only move the part path if no origins on file
09:24 AM TurBoss: i noticed that if there is no g5x on path it asumes g54
09:25 AM Lcvette: i figured it would
09:25 AM TurBoss: Lcvette: !!
09:33 AM TurBoss: Lcvette: ???
09:33 AM TurBoss: breaks too much?
09:33 AM * Lcvette posted a file: vtk_tool_height_issue.mkv (5628KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/QEzHIOOvaNFoxKBOsizedQyX >
09:33 AM Lcvette: did not notice any changes from last commit
09:33 AM Lcvette: video is from latest commit few minutes ago
09:33 AM TurBoss: try chips 2 and cds
09:33 AM TurBoss: a part without offsets
09:39 AM TurBoss: ok found some breakage
09:39 AM TurBoss: I'll continue latter
09:41 AM * Lcvette posted a file: 3dchips_test_run.mkv (8225KB) < https://matrix.org/_matrix/media/r0/download/matrix.org/OeHumheaJRSFusuAmdsDdBHK >
09:41 AM Lcvette: this appeared to work correctly!
09:41 AM Lcvette: \o/
09:42 AM Lcvette: oh you found breakage?
09:42 AM Lcvette: :o
09:42 AM Lcvette: ok
09:42 AM Lcvette: i will check in, later
03:01 PM Tom_L: ran into a wannabe linuxcnc convert
03:08 PM TurBoss: currently the vtk only creates one vtkActor per program but if a program has 2 paths with diferent offset 2 actor should be created
03:28 PM Lcvette: Ah
03:28 PM Lcvette: Is it fixable?
03:28 PM TurBoss: i have to find the line where the offset changes
03:29 PM TurBoss: and create a new actor
03:29 PM Lcvette: In what?
03:29 PM Lcvette: Py file?
03:29 PM TurBoss: in a program
03:29 PM Lcvette: Oh
03:29 PM TurBoss: now i managed to get a list of the offsets a program has
03:31 PM Lcvette: \o/
03:31 PM Lcvette: That's a good win!
03:34 PM TurBoss: Axis does the trick by reloading the image
03:34 PM TurBoss: but can take forever on big paths
03:35 PM Lcvette: Ah
03:35 PM Lcvette: I noticed on hazzys bezel program it takes a few seconds to load in probe basic
03:36 PM TurBoss: what about axis?¿
03:45 PM Lcvette: Didn't try axis
03:45 PM Lcvette: Also probe basic has two instances of vtk
03:45 PM Lcvette: Main and probe
04:46 PM TurBoss: 🔪
04:47 PM TurBoss: I don't find where to cut
04:47 PM TurBoss: 😐️
05:13 PM Tom_L: careful playing with knives you could get hurt
05:21 PM jthornton: finally break time
05:26 PM Lcvette: Cut what turboss?
05:32 PM Tom_L: maybe so there is just one instance of vtk
08:19 PM Lcvette: Think it's too cut the change from one order to the next when losing a multi offset program
08:20 PM Lcvette: Turboss, I think it should draw both too paths from the set offer origin
08:27 PM Infnity553: is the Discord bridge down again? :D
08:28 PM Lcvette: * Think it's too "cut" the change from one offset to the next when loading a multi offset program
08:28 PM Lcvette: * Turboss, I think it should draw both tool paths from the set offer origin
08:30 PM Infnity553: btw. have you guys seen the Handwheel from Surmetall ? https://www.thingiverse.com/thing:3684937
08:31 PM Infnity553: Puting one together atm. https://trash.ctdo.de/b/5daa65d9d65 talla83 has implemented SmartSerial on a pic and made a PCB that fits the Case
11:47 PM Lcvette: Lcvette goes to do a sleep study tomorrow for sleep apnea
11:47 PM Lcvette: Will be gone until Sunday afternoon