#hazzy Logs
Sep 20 2019
#hazzy Calendar
05:25 AM hazzy-m: Morning
05:25 AM jthornton: morning
08:04 AM Lcvette: morning
09:19 AM Tom_L: morning
10:53 AM Lcvette: Tom_L: movement!!
10:53 AM Lcvette: scale is off
10:53 AM Lcvette: need to fix that
10:57 AM Lcvette: scale fixed
10:58 AM jthornton: fix my faucet lol
10:58 AM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/EjtIFWpEFjHGTbVrIphANMhU >
10:58 AM Lcvette: this nwas the fix
10:58 AM Lcvette: \o/
11:04 AM jthornton: lunch minute is over back to work
11:07 AM Lcvette: jogging is smooth as silk too
11:07 AM Lcvette: jthornton: i'd rather fix faucets then hal errors
11:07 AM Lcvette: lol
12:04 PM Lcvette: turboss ru you around?
12:06 PM TurBoss: yo
12:11 PM Lcvette: did you find the wheel graphic?
12:18 PM TurBoss: just restored my computer
12:18 PM Lcvette: \o/
12:18 PM Lcvette: your up and running now?
12:19 PM TurBoss: only have to plug the linuxcnc sdd
12:19 PM TurBoss: just checking
12:19 PM TurBoss: stuff
12:19 PM * TurBoss uploaded an image: image.png (1703KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/HMNNMuirItlphLBPIkJDTJwA >
12:19 PM Lcvette: whoa
12:19 PM * TurBoss uploaded an image: image.png (1359KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/FzRAVYbIjYPzSNOvQmaemrLQ >
12:19 PM Lcvette: thats fancy
12:19 PM TurBoss: it has a connectr to plug led strips
12:20 PM TurBoss: so cpu fan is in sync with color
12:21 PM Lcvette: nice
12:21 PM TurBoss: give me 10 min
12:23 PM Lcvette: is where the images for the qml are located /home/chris/dev/qtpyvcp/qtpyvcp/widgets/display_widgets/atc_widget/images/
12:31 PM Tom_L: so how did you figure all that out?
12:31 PM Lcvette: Tom_L: dgarret on the forum in the hal section nailed it first try
12:32 PM Lcvette: said i needed those lines, i pu them in and voila pendant works!
12:32 PM Lcvette: its fantastic, no lag
12:32 PM Lcvette: clicks are exact
12:32 PM Lcvette: had to move the scale decimal
12:32 PM Tom_L: probably has something to do with the joint / axis change. i didn't have to do any of that
12:32 PM Lcvette: had it at .0001 .001 .01
12:33 PM Tom_L: i wondered if the scale would be off
12:33 PM Lcvette: wound up needing .000001 .00001 .0001
12:33 PM Lcvette: noty sure maybe something with the ilowpass settings?
12:34 PM Tom_L: change it there and see
12:34 PM Lcvette: do i need too?
12:34 PM Tom_L: that's up to you
12:34 PM Lcvette: it seems perfect right now
12:34 PM Lcvette: lol
12:34 PM Lcvette: im in the middle of replacing the Y axis cars finally
12:34 PM Tom_L: i would try it to learn something not necessarily to be changing it
12:35 PM Lcvette: ok i will star it for later
12:35 PM Tom_L: sometimes i break things to see how they work
12:35 PM Lcvette: have a bunch left to do i wanna get done so i can start testing the machine itself
12:36 PM Tom_L: so you're using the qt interface too right?
12:36 PM Tom_L: for me to try that i'd need a faster pc on the mill
12:41 PM Tom_L: looking at your config i'm wondering if and why you need to use joint.0.jog-enable at all if it winds up going to axis.x.jog-enable anyway
12:42 PM Tom_L: seems a little redundant to me
12:42 PM Lcvette: yeah using the qtpyvcp probe basic interface i designed
12:42 PM Tom_L: if it were me, i would test that to find out
12:42 PM Lcvette: i have a fast pc with great latency
12:43 PM Lcvette: i dunno
12:43 PM Lcvette: it works right now
12:43 PM Lcvette: take the win!!
12:43 PM Lcvette: lol
12:43 PM Lcvette: i will test it out once she is all fixed up and running
12:43 PM Lcvette: still need to do the probing routine testing
12:43 PM Tom_L: send the 7i77 input20 straight to axis.x.jog-enable and bypass the joint.0.jog-enable
12:43 PM Lcvette: atc functionality testing
12:44 PM Tom_L: if both are needed for some new code they have planned maybe they should be tied internally
12:45 PM Tom_L: just me thinking out loud...
12:45 PM Lcvette: dgarrett said to add those lines not replace anything else
12:46 PM Tom_L: i believe you
12:46 PM Lcvette: so im not sure but it seems it probably needs both
12:46 PM Lcvette: something about homing
12:46 PM Lcvette: but it was over my heaad
12:46 PM Lcvette: at the moment, im replacing the bearing cars for the second time.. i would rather not break them a third time
12:46 PM Lcvette: lol
12:46 PM Tom_L: to make lcnc more generic they went to joint over axis
12:47 PM Tom_L: well stop hitting them
12:47 PM Tom_L: maybe you should order a box full
12:49 PM Lcvette: $$$$$$
12:49 PM Lcvette: lol
12:49 PM Tom_L: glad you got it going
12:49 PM Lcvette: from what i read the joint thing was a benefit
12:49 PM Lcvette: did i read it wrong?
12:49 PM Lcvette: especially with arc blending
12:49 PM Lcvette: look ahead etc
12:49 PM Tom_L: maybe, everyone has an opinion
12:50 PM Lcvette: smoother movements
12:50 PM Lcvette: better acceleration calcs
12:53 PM Tom_L: what was the cost of the pendant with the extra buttons you mentioned?
12:53 PM Tom_L: link..
01:06 PM Lcvette: i don't remember that one
01:07 PM Tom_L: got a link to yours again?
01:08 PM Tom_L: do they say the radio range on them?
01:08 PM Lcvette: the one i bought was just under $200 then with shipping it was just a touch over
01:09 PM Lcvette: www.cdxhctech.com
01:09 PM Lcvette: http://www.cdxhctech.com/html/eProduct/view_381.html
01:10 PM Lcvette: http://www.cdxhctech.com/html/eProduct/view_386.html
01:10 PM Lcvette: thats one with lots of buttons
01:10 PM Lcvette: they are radio wireless, not usb
01:10 PM Tom_L: right
01:10 PM Tom_L: i saw the radio module on the board
01:11 PM Tom_L: wonder what the battery life is
01:11 PM Lcvette: if you are electronics savvy, you maybe could build one
01:11 PM Lcvette: but for me it would wind up a project that never got finished
01:11 PM Lcvette: the pendant itself feels very high quality
01:11 PM Lcvette: has a great fitted removable rubber skin
01:12 PM Lcvette: dunno
01:12 PM Lcvette: it has internal battery conservation stuff
01:12 PM Lcvette: ie shuts down after so long
01:12 PM Lcvette: but move the wheel or switch and it is back on
01:13 PM Tom_L: so do i
01:13 PM Lcvette: takes 2AA batteries
01:13 PM Tom_L: probably out of the price range for my little mill
01:13 PM Tom_L: i don't really need it anyway. mine works fine
01:13 PM Lcvette: also has a magnetic backing so i can stick it on the door or head or table etc
01:14 PM Lcvette: ok back to bearing blocks!
01:14 PM Tom_L: you should be good at that task
01:18 PM TurBoss: Lcvette i get this error:
01:18 PM TurBoss: ```
01:18 PM TurBoss: ImportError: No module named probe_basic_rc
01:25 PM Lcvette: TurBoss: where?
01:25 PM TurBoss: https://qtpyvcp.kcjengr.com/tools/qcompile.html
01:25 PM TurBoss: found it
01:26 PM Lcvette: i need to run that?
01:26 PM TurBoss: not sure
01:26 PM TurBoss: the install process should do
01:26 PM Lcvette: oh
01:26 PM TurBoss: I'm trying to fix
01:26 PM Lcvette: ok
01:31 PM TurBoss: aparently is begin done
01:31 PM TurBoss: https://github.com/kcjengr/qtpyvcp/blob/master/setup.py#L9
01:31 PM TurBoss: any ideas?
01:32 PM TurBoss: from qtpyvcp.tools.qcompile import compile
01:32 PM TurBoss: compile(['examples/probe_basic',])
01:32 PM TurBoss: * ```
01:32 PM TurBoss: from qtpyvcp.tools.qcompile import compile
01:32 PM TurBoss: compile(['examples/probe_basic',])
01:32 PM hazzy-m: Hmm
01:32 PM TurBoss: ```
01:32 PM TurBoss: File "/home/turboss/.local/lib/python2.7/site-packages/examples/probe_basic/probe_basic.py", line 11, in <module>
01:32 PM TurBoss: site-packages
01:32 PM hazzy-m: Are the QT dev tools instead? Should be..
01:32 PM Lcvette: i just remember that it was in the qml programe
01:33 PM TurBoss: installed?
01:33 PM Lcvette: not on this machine
01:33 PM TurBoss: ah
01:33 PM Lcvette: i wanted to make sure everything installed as a user and keep the system light without the extra stuff
01:33 PM TurBoss: not at the time of pip
01:33 PM TurBoss: I'll reinstall with pip
01:35 PM TurBoss: hurray!
01:35 PM TurBoss: pip didn't noticed missing devtools
01:35 PM Lcvette: works?
01:36 PM hazzy-m: I'm about ready to shoot this guy, he sent enough parts to make a couple of each of 15 different truck covers, when I asked him to select a couple products and send me enough to make 15 of each. Now I have a shit ton of parts to program and only tow of each to run, so no test runs
01:37 PM Tom_L: you're just that good
01:37 PM jthornton: we know you love a challenge...
01:38 PM Tom_L: maybe we should post that mpg.hal somewhere since it seems to be different than the norm now
01:38 PM -!- #hazzy mode set to +o by ChanServ
01:39 PM Lcvette: TurBoss: what do i need to do?
01:39 PM TurBoss: wait 10 min lol
01:39 PM Lcvette: ok
01:39 PM Lcvette: \o/
01:40 PM TurBoss: should be up in a min
01:40 PM * Tom_L taps his foot on the floor impatiently
01:40 PM Not-5e4d: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/Je3QW
01:40 PM Not-5e4d: [02qtpyvcp] 07TurBoss 03cd196b0 - include png files for distribution
01:41 PM TurBoss: ```
01:41 PM TurBoss: pip install --upgrade git+https://github.com/kcjengr/qtpyvcp
01:41 PM TurBoss: should show the graphics
01:42 PM TurBoss: @hazzy the lack of qtdevtools didn't make pip to crash
01:42 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+460/-0/±0] 13https://git.io/Je3Q8
01:42 PM Not-5e4d: [02qtpyvcp] 07traviscibot 03c4792df - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
01:45 PM Lcvette: TurBoss: run that?
01:45 PM TurBoss: with that you can test the latests master
01:45 PM Lcvette: ?
01:45 PM TurBoss: if works ok hazzy could make a release
01:46 PM Lcvette: what do you mean test the latest master?
01:46 PM TurBoss: pick the changes i made for the atc pics
01:46 PM TurBoss: the missing ones
01:46 PM Lcvette: i don't understand
01:47 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/YGxIGuVuSWfWpMSmTULjONfw >
01:47 PM Lcvette: i have no dev stuff on this machine to pick anything
01:47 PM Lcvette: ok
01:48 PM TurBoss: but my changes are on master
01:48 PM Lcvette: i just ran the upgrade
01:48 PM TurBoss: wich one
01:48 PM TurBoss: ```
01:48 PM TurBoss: pip install --upgrade git+https://github.com/kcjengr/qtpyvcp
01:48 PM TurBoss: ^
01:48 PM Lcvette: so no fix in the current upgrade?
01:49 PM Lcvette: no
01:49 PM Lcvette: the othere
01:49 PM Lcvette: pip install --upgrade qtpyvcp
01:49 PM TurBoss: ok
01:49 PM TurBoss: this one doesn't include the fix yet
01:50 PM Lcvette: k
01:50 PM Lcvette: i will wait for hazzy to release the fix
01:50 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/mlvvymyspUaIhAtcxvBZYSNQ >
01:50 PM TurBoss: * ```
01:50 PM TurBoss: pip install --upgrade git+https://github.com/kcjengr/qtpyvcp
01:50 PM TurBoss: ```this command means, hey pip don't pic the release pic the master
01:51 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/nNRcojiGNoDnMfVxrkFNfHhy >
01:51 PM Lcvette: sure he will be busy until maybe later toinuightoh so run that one?
01:51 PM TurBoss: yes
01:51 PM TurBoss: is safe
01:51 PM Lcvette: ok
01:52 PM TurBoss: maybe an error is shown
01:52 PM TurBoss: and doesn't boot
01:52 PM TurBoss: Lcvette: please install this first
01:52 PM TurBoss: ```
01:52 PM TurBoss: sudo apt install qttools5.dev qttools5-dev-tools
01:53 PM TurBoss: may be a requirement since now
01:53 PM TurBoss: so we can hacompile resources during the install process
01:53 PM Lcvette: the image is there now!
01:53 PM TurBoss: oh
01:53 PM Lcvette: i did not install the gtools
01:53 PM TurBoss: hurray!
01:53 PM TurBoss: ok
01:54 PM Lcvette: \o/
01:54 PM Lcvette: hurray!
01:54 PM TurBoss: so not required !hurray
01:54 PM Lcvette: i need gls?
01:54 PM TurBoss: !
01:54 PM TurBoss: now need to be relesaed
01:54 PM Lcvette: gttools
01:54 PM Lcvette: no nneed?
01:54 PM TurBoss: and pip install --upgrade qtpyvcp will work
01:54 PM TurBoss: no
01:54 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson published 03v0.2.5 | - 13https://git.io/Je3Qo
01:54 PM TurBoss: no nned
01:54 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson created tag 03v0.2.5 - 13https://git.io/fhCou
01:54 PM Lcvette: hurray!
01:54 PM TurBoss: * no need
01:54 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson tagged 03cd196b0 as 03v0.2.5 13https://git.io/Je3QK
01:54 PM TurBoss: lol!
01:54 PM TurBoss: \o//
01:54 PM TurBoss: * \\\o//
01:55 PM TurBoss: * \\o//
01:55 PM Lcvette: hahaha
01:55 PM Lcvette: hurray!!
01:55 PM Lcvette: imm replacing the broken beasring blocks
01:55 PM TurBoss: broken?
01:55 PM TurBoss: bearing?
01:55 PM hazzy-m: Should be up soon
01:55 PM Lcvette: yes
01:56 PM TurBoss: cool
01:56 PM TurBoss: thanks!
01:56 PM * Lcvette uploaded an image: VectorImage_2019-09-20_025036.jpg (103KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/sigGoNXYMErBmDFNCNluHXQm >
01:56 PM Lcvette: hazzy: \o/
01:57 PM Lcvette: ok back in a bit need to concentrate so i don't break something else\
01:57 PM Lcvette: lol
02:01 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+460/-0/±0] 13https://git.io/Je3Qy
02:01 PM Not-5e4d: [02qtpyvcp] 07traviscibot 03b9839b7 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
02:01 PM Not-5e4d: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/Je3QS
02:01 PM Not-5e4d: [02qtpyvcp] 07TurBoss 034a74388 - qtpyvcp is now on pypi
02:02 PM travis-ci: kcjengr/qtpyvcp#1078 (v0.2.5 - cd196b0 : TurBoss): The build passed.
02:02 PM travis-ci: Diff view : https://github.com/kcjengr/qtpyvcp/compare/v0.2.5
02:02 PM travis-ci: Build details : https://travis-ci.org/kcjengr/qtpyvcp/builds/587614595
02:02 PM Tom_L: has probe basic been tested on hardware yet?
02:02 PM TurBoss: yes Infinity did
02:02 PM Tom_L: how'd it go?
02:03 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+460/-0/±0] 13https://git.io/Je3QH
02:03 PM Not-5e4d: [02qtpyvcp] 07traviscibot 0367f2a3f - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
02:03 PM Infinity[m]1: works alright, had some issues with my PP and it does not show Error messages yet
02:04 PM TurBoss: ah cool
02:04 PM TurBoss: good reminder
02:05 PM Lcvette: Infinity: PP?
02:06 PM Infinity[m]1: postprocessor
02:06 PM Lcvette: with probe basic?
02:06 PM Lcvette: post processor problems with probe basic?
02:07 PM TurBoss: should be ngc
02:07 PM Infinity[m]1: yes but no 😄 general LinuxCNC problems based on a character in acomment that was not escaped correctly
02:08 PM Infinity[m]1: but Axis showed an error and hilighted the line, PB did not
02:08 PM TurBoss: oh ok
02:09 PM Infinity[m]1: I'm not shure what it was, maybe an german Umlaut like äöü in a Tool name ? Can't remember
02:09 PM Lcvette: error messeges not working turboss?
02:09 PM TurBoss: ya.. they are silenced
02:09 PM TurBoss: problems with dbus
02:09 PM TurBoss: we are working on a native qt notification system
02:10 PM TurBoss: there is a branch
02:10 PM TurBoss: should be finished
02:12 PM Lcvette: ah
02:12 PM Tom_L: any pitfalls like when in one screen accidental access to things you shouldn't have access to?
02:13 PM Tom_L: ie: program mode can't allow the spindle to be turned off etc
02:13 PM Tom_L: maybe a bad example but it popped into my head
02:14 PM Tom_L: i guess what i'm asking is there error checking built into it?
02:15 PM Not-5e4d: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/Je37J
02:15 PM Not-5e4d: [02qtpyvcp] 07TurBoss 03a990a07 - typo
02:15 PM TurBoss: with rules you can implement thoose
02:17 PM TurBoss: https://qtpyvcp.kcjengr.com/tutorials/widget_rules.html?highlight=rules
02:18 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+460/-0/±0] 13https://git.io/Je37L
02:18 PM Not-5e4d: [02qtpyvcp] 07traviscibot 03f917d99 - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
02:20 PM TurBoss: https://qtpyvcp.kcjengr.com/tutorials/widget_rules.html
02:20 PM TurBoss: oops
02:20 PM TurBoss: XD
02:24 PM Not-5e4d: [02qtpyvcp] 07TurBoss pushed 031 commit to 03master [+0/-0/±1] 13https://git.io/Je373
02:24 PM Not-5e4d: [02qtpyvcp] 07TurBoss 033a82cab - gitter room was moved
02:26 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson pushed 031 commit to 03gh-pages [+460/-0/±0] 13https://git.io/Je37G
02:26 PM Not-5e4d: [02qtpyvcp] 07traviscibot 038cf427b - Deploy kcjengr/qtpyvcp to github.com/kcjengr/qtpyvcp.git:gh-pages
03:15 PM Lcvette: TurBoss (@TurBoss:matrix.org): https://youtu.be/YiizlW3aKqY
03:15 PM Lcvette: \o/
03:18 PM TurBoss: woah very nice
03:18 PM TurBoss: now you can take a carajillo !!!
03:18 PM TurBoss: hurray!!!
03:18 PM Lcvette: For real!
03:18 PM Lcvette: I need one
03:19 PM Lcvette: But for some reason on referencing the carousel it just keeps turning
03:19 PM Lcvette: Need to figure out why
03:31 PM Lcvette: TurBoss: do you remember we had that issue on the sim?
03:31 PM Lcvette: do you remember how we fixed?
03:58 PM Lcvette: TurBoss: the wheel just says referencing the whole time\
03:59 PM Lcvette: wonder if it needs a correct motion pin assigned so it knows when the carousel has received the input from the home sensor?
04:04 PM TurBoss: a missing m68
04:06 PM Lcvette: where?
04:07 PM Lcvette: i see an m68 in M14
04:07 PM Lcvette: ```
04:07 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/kFrZvrRBdedYbREWfQsZrslZ >
04:08 PM Lcvette: no m68 in m13
04:08 PM TurBoss: hmmm
04:08 PM TurBoss: is there something in the atc_test
04:08 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/bKNMmazlJpJTxUQltPUgFkua >
04:10 PM TurBoss: I'm a bit away
04:10 PM TurBoss: be on latter
04:10 PM Lcvette: ok
04:10 PM TurBoss: * i'll be on latter
04:10 PM Lcvette: i'll leave it till then and work on the probe
05:01 PM jthornton: Ordered: 1 Shipped: 1 Backordered: 0 4852111 1/2in WOOD SLICER 111in
05:30 PM Lcvette: probing works awesome!!!!
05:31 PM Lcvette: soon as i can get the atc stuff sorted, i think everything will be working!\
05:31 PM Lcvette: \o/
05:32 PM Lcvette: jtthornton, you -not input was excellent and worked perfect on the probe!
05:35 PM jthornton: great
05:36 PM Lcvette: This is too cool
05:46 PM hazzy-m: yo
05:46 PM jthornton: yo-yo
05:46 PM Tom_L: Lcvette, was that part of the issue?
05:47 PM Lcvette: yo
05:47 PM Lcvette: o/
05:47 PM Lcvette: Tom_L: whats that?
05:47 PM Tom_L: -not
05:47 PM Lcvette: the -not?
05:47 PM Tom_L: or was that for something else
05:47 PM Lcvette: no, i just knew the probe needed an inverse because its connected all the time
05:47 PM Lcvette: and when it trips it opens
05:48 PM Tom_L: ahh
05:48 PM Lcvette: so i used the -not and it worked without complaint
05:48 PM Lcvette: so -not in 2.9 is the correct inverse
05:48 PM Tom_L: is that keyboard liquid proof?
05:48 PM Tom_L: kinda like it
05:48 PM Lcvette: which makes sense since the inverse on the halshow shows pin15-not
05:49 PM Lcvette: yes its completely sealed
05:49 PM Lcvette: and backlit
05:49 PM Tom_L: no it's because it's a daughter card instead of the main one
05:49 PM Lcvette: wasn't cheap but i knew i needed it water proof
05:50 PM Tom_L: the .in_not works on the main controler and -not works on daughter cards
05:50 PM Tom_L: just depends which one you're addressing
05:50 PM Tom_L: i see the atc works
05:51 PM Lcvette: almost works
05:51 PM Lcvette: need to resolve a bug when it tries to reference
05:51 PM Tom_L: does the spindle lift out of the way for a complete change?
05:51 PM Lcvette: some of the new code is interfering and it just turns and turn and turns
05:51 PM Lcvette: lol
05:51 PM Lcvette: yes
05:52 PM Tom_L: i don't see any vises or parts on that table!
05:52 PM Tom_L: wtf
05:53 PM Lcvette: https://youtu.be/h0V8YF-n290
05:53 PM Lcvette: its never cut a part yet
05:53 PM Lcvette: hoping it will this weekend
06:10 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson published 03v0.2.5 | v0.2.5 - 13https://git.io/Je3Qo
06:12 PM jthornton: lol I have the same tool carousel on the BP discovery 308... you take a nap between tools
06:12 PM hazzy-m: lol
06:28 PM Tom_L: fadal are damn slow too
06:34 PM * TurBoss is back
06:35 PM Lcvette: Yo
06:35 PM Lcvette: \o/
06:35 PM TurBoss: ok
06:35 PM TurBoss: sek i'll reboot
06:35 PM Lcvette: K
06:36 PM TurBoss: oho
06:36 PM * TurBoss uploaded an image: image.png (26KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/azQeTDXTIQzBVqHQpNHXffus >
06:38 PM Lcvette: What's that?
06:45 PM TurBoss: shutdown and update
06:45 PM TurBoss: I'm in
06:46 PM TurBoss: the referencing message never goes away?
06:47 PM Lcvette: no, it never references
06:47 PM Lcvette: it just keeps turning and turning and turning
06:47 PM TurBoss: oh lol
06:47 PM Lcvette: the m,achine
06:47 PM TurBoss: 😆
06:47 PM Lcvette: merrigoround
06:47 PM TurBoss: the machine is ok?
06:48 PM Lcvette: no machine is what keeps tuirning
06:48 PM TurBoss: oh
06:48 PM Lcvette: graphical wheel just sits saying referencing
06:48 PM TurBoss: so real atc never homes?
06:49 PM Lcvette: correct
06:49 PM Lcvette: just keeps turning
06:49 PM Lcvette: the original macros it homes corrrectly
06:49 PM TurBoss: can you send me m13.ngc?
06:49 PM Lcvette: so it has to be something newly added interfering i think mayb
06:50 PM TurBoss: both
06:50 PM TurBoss: ok cool
06:51 PM * Lcvette posted a file: macros.tar.bz2 (3KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/AuupxhBZyITJMDJREIscbBcx >
06:52 PM Lcvette: these are the newly edited macros
06:53 PM * Lcvette posted a file: macros_old.tar.bz2 (3KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/vJyacWlPETSLbUiDkJtBczIw >
06:53 PM Lcvette: these are the old macros that worked
06:55 PM TurBoss: hmm
06:58 PM Lcvette: whatcha think
06:59 PM TurBoss: not much... making me a coffe
06:59 PM TurBoss: lol
07:00 PM Lcvette: ah
07:00 PM Lcvette: carillo
07:00 PM TurBoss: xD
07:03 PM TurBoss: is motion pin 3 wired in hal ?
07:03 PM TurBoss: it should is moving the atc...
07:04 PM TurBoss: :|
07:04 PM Lcvette: whats nmotion pin 3?
07:05 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/SdYtODwjNPWmlxJUZOjOJxbW >
07:06 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/wUoVqkaBmyKDrGPxtPBCudhz >
07:06 PM TurBoss: that
07:06 PM TurBoss: ```
07:06 PM TurBoss: net atc-fwd hm2_7i92.0.7i76.0.3.output-05 <= motion.digital-out-03
07:07 PM TurBoss: seems ok
07:07 PM TurBoss: ok
07:07 PM Lcvette: thats to turn it
07:07 PM TurBoss: yup
07:07 PM TurBoss: ok
07:07 PM Lcvette: ```net atc-is-out hm2_7i92.0.7i76.0.3.input-00 <= motion.digital-in-01
07:07 PM Lcvette: net atc-zero hm2_7i92.0.7i76.0.3.input-03 <= motion.digital-in-03
07:07 PM Lcvette: thats to stop it at home position
07:08 PM TurBoss: the same pin?
07:08 PM TurBoss: hmmm ok
07:09 PM Lcvette: one i smotion digital out the other is in
07:09 PM TurBoss: did work before?
07:10 PM Lcvette: yes
07:15 PM Lcvette: if i put the old m13 file in the new macros folder it homews correctly
07:15 PM * TurBoss uploaded an image: image.png (117KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/YtoRCUmqeAkxBgUCHJEvdtJv >
07:16 PM TurBoss: ok
07:16 PM Lcvette: so it is something to do with the additional codes that were added
07:16 PM Lcvette: maybe they need to be inside of a routine?
07:17 PM TurBoss: hmmmm no idea
07:17 PM TurBoss: they are ins sub m13
07:17 PM Lcvette: what do the new codes do?
07:17 PM TurBoss: ```
07:17 PM TurBoss: M65 P10 (set atc widget unhomed)
07:17 PM TurBoss: M64 P11 (show atc widget referencing msg)
07:18 PM Lcvette: maybe: if 0130 etc
07:18 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/SjGbiFZyCAZfVSNxvEYmvFwG >
07:19 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/oaRvIBjXvjJUFlEBVKabTmHl >
07:19 PM Lcvette: yes
07:19 PM Lcvette: that one works perfect
07:19 PM TurBoss: what is m14?
07:20 PM Lcvette: no clue
07:20 PM Lcvette: you made it
07:20 PM Lcvette: lol
07:20 PM TurBoss: ah
07:20 PM TurBoss: found it
07:21 PM TurBoss: what?
07:21 PM TurBoss: i dind't found it
07:21 PM TurBoss: :P
07:21 PM TurBoss: m14
07:21 PM TurBoss: is unknown?
07:21 PM Lcvette: the old macro has no m14
07:22 PM Lcvette: you made M14
07:22 PM TurBoss: m14 paints tools in the carousel
07:22 PM Lcvette: the original macros there isn't an M14 file
07:22 PM Lcvette: ah
07:23 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/mZXlUPeqkzpRRFmkBKUGssgF >
07:23 PM TurBoss: do you have it in place?
07:23 PM Lcvette: yes
07:23 PM TurBoss: cool
07:23 PM TurBoss: i just added a note
07:24 PM TurBoss: the comment
07:24 PM Lcvette: maybe the M13 needs some more structure?
07:25 PM TurBoss: can we see the value of #5399=
07:25 PM TurBoss: * can we see the value of #5399?
07:25 PM Lcvette: var table?
07:25 PM TurBoss: maybe it never changes
07:25 PM TurBoss: yes
07:25 PM TurBoss: but if with the old file works...
07:26 PM Lcvette: 5390 is as high as my var table goes
07:26 PM Lcvette: maybe it needs to be added?
07:26 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/pnHdRmJrwvdamPeRuPMSYTJf >
07:26 PM TurBoss: duno...
07:27 PM Lcvette: 5399 - Result of M66 - Check or wait for input. Volatile.
07:27 PM TurBoss: ok this section only checks if m66 is ok
07:28 PM TurBoss: is -1 or something abort
07:28 PM TurBoss: with lower than LT 0
07:29 PM Lcvette: dunno
07:29 PM Lcvette: i think so
07:29 PM TurBoss: how does the electronic sensor behabe?
07:29 PM TurBoss: with b or v
07:29 PM Lcvette: ?
07:29 PM Lcvette: has an index and a home
07:30 PM TurBoss: can you draw a timming diagram?
07:30 PM TurBoss: :P
07:30 PM Lcvette: ?
07:30 PM TurBoss: sek
07:32 PM * TurBoss uploaded an image: timming.png (9KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/tLhYanZHcSAmgddMMopjRvBi >
07:33 PM TurBoss: like this?
07:33 PM TurBoss: but 12 index
07:33 PM Lcvette: pocket 1 is where the home switch changes
07:34 PM TurBoss: so it turns until pocke 1 is reached?
07:34 PM Lcvette: yes
07:34 PM Lcvette: that the home position
07:40 PM TurBoss: Lcvette: you just changed the m13.ngc file to get it work?
07:40 PM Lcvette: yes
07:41 PM Lcvette: by reverting to the old m13 file it references the carousel
07:41 PM Lcvette: but the graphical dispolay doesn't work anymore
07:41 PM TurBoss: ok
07:41 PM Lcvette: i mean the un referenced sign
07:42 PM Lcvette: it still turns when you go atc fowd or rev
07:42 PM TurBoss: so its only show and hide the referencing messages..
07:42 PM TurBoss: can we just add some sections?
07:43 PM TurBoss: leave m14 for latter
07:43 PM Lcvette: I guess
07:43 PM TurBoss: so this goes before the m64 p3
07:43 PM TurBoss: ```
07:43 PM TurBoss: M65 P10 (set atc widget unhomed)
07:43 PM TurBoss: M64 P11 (show atc widget referencing msg)
07:44 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/KvVhlmbJbLIhLLNDWErJyFIa >
07:44 PM Lcvette: Can we just hashtag out parts?
07:45 PM TurBoss: #?
07:45 PM Lcvette: Yes
07:45 PM Lcvette: #m14
07:45 PM TurBoss: ;m14
07:45 PM Lcvette: Ok
07:45 PM TurBoss: or ()
07:48 PM Lcvette: works
07:48 PM TurBoss: hurray!
07:48 PM Lcvette: \o/
07:48 PM Lcvette: hurray!
07:48 PM TurBoss: ok the bug is less far
07:48 PM Lcvette: feature now?
07:48 PM Lcvette: lol
07:49 PM TurBoss: xD
07:49 PM TurBoss: how does your m14.ngc look?
07:51 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/cReuUHOJQAlHLbYLFtHGblGw >
07:52 PM TurBoss: 😕
07:54 PM Lcvette: do you know what 5170 and 5171 are?
07:55 PM TurBoss: no
07:56 PM TurBoss: I'm still suspect from motion pin 3...
07:56 PM TurBoss: but not sure
07:56 PM TurBoss: :d
07:56 PM TurBoss: should be ok
07:56 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/dJAxbdRlAOIceKKxfapBtWfW >
07:56 PM Lcvette: this worked
07:56 PM TurBoss: whoa!
07:57 PM Lcvette: i don't know why i thought to do it
07:57 PM Lcvette: but it worked
07:57 PM Lcvette: i don't have any tools in let me try adding tools to see if it paints them
07:58 PM TurBoss: maybe it doesn't draw the tools once homed....
07:59 PM * TurBoss goes aft 10 min
08:03 PM Lcvette: nope doesnt draw the tools
08:12 PM TurBoss: back
08:12 PM Lcvette: i just realized i did not have the tool slots in the var table
08:12 PM Lcvette: jkust added them
08:12 PM Lcvette: going to try the code i sent easrlier again
08:13 PM TurBoss: ahh oh
08:16 PM Lcvette: didn't draw the tools
08:16 PM Lcvette: but they are in the var file now
08:16 PM TurBoss: ok
08:16 PM TurBoss: so
08:16 PM TurBoss: let me check on thing
08:16 PM Lcvette: k
08:17 PM TurBoss: do you have the m14 commented out?
08:17 PM TurBoss: with the ,
08:17 PM TurBoss: * with the ;
08:17 PM Lcvette: no
08:17 PM TurBoss: is in place?
08:17 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/YsQmOVmBCilToNgsiiNlHWQc >
08:17 PM TurBoss: ah
08:17 PM TurBoss: ok
08:17 PM TurBoss: can we try without o130?
08:17 PM Lcvette: if i put it at the bottom just before the endsub it works
08:18 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/jHulPDqQdgBKDFyIHlwbnYaJ >
08:18 PM TurBoss: ya that way
08:19 PM TurBoss: did you tried that?
08:19 PM TurBoss: * have you tried that?
08:19 PM Lcvette: yes, it homes but doesnt paint the tools
08:19 PM Lcvette: just tried it
08:20 PM TurBoss: what is the tool range?
08:20 PM TurBoss: 5190 +12?
08:20 PM Lcvette: 5190-5102
08:20 PM Lcvette: yes
08:21 PM TurBoss: are tools in the var file?
08:21 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/uUMAWypJybHpOXKxSRbkCvgW >
08:22 PM Lcvette: i only put 4 tools in
08:22 PM Lcvette: tough bug
08:23 PM TurBoss: 😕
08:23 PM Lcvette: while i install the tools it paints them perfe4ctly
08:23 PM TurBoss: its only while homed true?
08:23 PM Lcvette: ?
08:23 PM Lcvette: its homes when im installing the tools
08:24 PM Lcvette: homed
08:24 PM Lcvette: the carousel
08:24 PM Lcvette: it paints them as i install them
08:24 PM Lcvette: but it does not paint them after booting up and referencing the carousel
08:24 PM Lcvette: all pockets are blank regardless ofwhats in the var file
08:25 PM TurBoss: ya because the m14 bug
08:25 PM TurBoss: cool
08:25 PM TurBoss: ok
08:25 PM TurBoss: found it
08:25 PM TurBoss: i think
08:25 PM Lcvette: should we run m14 before it starts to move?
08:26 PM TurBoss: when it finishes
08:26 PM Lcvette: or can it populate the var table on startup?
08:26 PM TurBoss: m14 will read the var table and paint pockets
08:26 PM TurBoss: if you call from mdi
08:26 PM TurBoss: or not
08:26 PM Lcvette: so can we use halui
08:26 PM Lcvette: mdi command at startup
08:26 PM TurBoss: ??
08:26 PM Lcvette: with M14?
08:27 PM TurBoss: its done on m13
08:27 PM Lcvette: but iot messes up m13
08:27 PM TurBoss: can you issue m14 ?
08:27 PM TurBoss: and see what happens
08:28 PM TurBoss: just after boot and home not referenced
08:28 PM TurBoss: carousel home
08:28 PM Lcvette: just tried
08:28 PM Lcvette: no paint
08:28 PM TurBoss: ok
08:28 PM TurBoss: so halui will no paint
08:28 PM Lcvette: so m14 is not working then
08:28 PM Lcvette: thats why it never finishes homing maybe?
08:29 PM TurBoss: i think...
08:29 PM TurBoss: seems related
08:29 PM TurBoss: its very close and its giving errors
08:30 PM TurBoss: maybe o101 exist
08:30 PM TurBoss: duno...
08:31 PM Lcvette: what o101?
08:32 PM TurBoss: I'm trying with sim
08:33 PM Lcvette: k
08:33 PM TurBoss: sim just worked
08:34 PM TurBoss: I homed the machine and issued m14
08:34 PM TurBoss: all tools ploped
08:34 PM Lcvette: maybe im missing something in qmol?
08:34 PM Lcvette: that you have and i don't?
08:34 PM TurBoss: the atc_motion.hal
08:34 PM Lcvette: i just tried changing to o999
08:35 PM Lcvette: i have the atc_motion.hal
08:35 PM TurBoss: same?
08:35 PM TurBoss: ok
08:35 PM Lcvette: dunno
08:35 PM Lcvette: sek
08:35 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/mZSjGFpnfkUpQgZIRwMPSahA >
08:35 PM TurBoss: do you have the atc_motion in your ini postGui_hal etc..?
08:36 PM TurBoss: I'll check how does the store tool paints
08:36 PM Lcvette: sec
08:36 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/gAfTLuuMmxXzYRMadbcBxkyG >
08:37 PM TurBoss: it should be ok because it draws when storing right?¿
08:37 PM Lcvette: yes
08:37 PM Lcvette: but not when rebooted
08:38 PM TurBoss: and you issuing m14 does nothing
08:38 PM TurBoss: ok
08:39 PM Lcvette: correct
08:39 PM Lcvette: issuing M14 before referencing carouself does nothing
08:41 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/tGPuOecfDZVqCQmBkmvmnUIo >
08:41 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/fGeHpxKQdgBZpGyQcFXSRLUS >
08:42 PM TurBoss: this is the sim working config
08:42 PM TurBoss: :(
08:42 PM TurBoss: * this is the sim working sub
08:42 PM Lcvette: its same?
08:42 PM TurBoss: should be
08:43 PM TurBoss: ```
08:43 PM TurBoss: M68 E[#1 + 10] Q[#[5189 + #1]]
08:43 PM TurBoss: ```
08:43 PM TurBoss: here is the mess
08:43 PM TurBoss: #1 value is 1
08:43 PM Lcvette: you found it?
08:43 PM TurBoss: no
08:46 PM * TurBoss sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/aIitlQidXmsEGPCUDdmDOeXE >
08:46 PM Lcvette: there was one minor change between them i fixed but no worky still
08:47 PM TurBoss: so we can see since what number counts
08:48 PM Lcvette: run from terminal?
08:48 PM Lcvette: how to do again?
08:48 PM TurBoss: yes pleas
08:48 PM TurBoss: open a terminal and hit the up key since you find the correct command
08:48 PM TurBoss: up down
08:49 PM TurBoss: linuxcnc path to your ini
08:49 PM Lcvette: unknown mcode
08:49 PM Lcvette: m14
08:50 PM TurBoss: ok
08:50 PM TurBoss: we have something
08:50 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/vitTJMbFgMIOWdtNksJfPvPk >
08:50 PM TurBoss: ini file
08:50 PM Lcvette: remap section!!!
08:50 PM Lcvette: hgahahahaha
08:50 PM TurBoss: yeah!
08:51 PM TurBoss: ok I'll work on notifications
08:51 PM Lcvette: just changed ini
08:52 PM Lcvette: testing
08:52 PM TurBoss: we would noticed
08:52 PM Lcvette: \o/
08:52 PM Lcvette: victorious
08:52 PM TurBoss: YEAH!
08:53 PM TurBoss: barvo!
08:53 PM Lcvette: it homes and works and paints now!!!!!
08:53 PM TurBoss: ole!
08:53 PM Lcvette: damn remap line in ini
08:53 PM TurBoss: hahahaha
08:53 PM Lcvette: ole ole ole ole!
08:53 PM TurBoss: damn missing notifications
08:53 PM Lcvette: we needs the notifications!
08:54 PM TurBoss: there exist a widget
08:54 PM TurBoss: a table
08:54 PM TurBoss: but requieres space
08:54 PM TurBoss: on UI
08:54 PM Lcvette: ?
08:54 PM Lcvette: box?
08:54 PM TurBoss: yes a box that shows notifications
08:54 PM TurBoss: not a popup
08:54 PM TurBoss: a history
08:55 PM Lcvette: can add a box on a back page and mauybe a led notification if there is an error?
08:55 PM Lcvette: is that possible maybe?
08:55 PM TurBoss: yes
08:55 PM TurBoss: sek I'll try
08:55 PM Lcvette: hurray!
08:55 PM Lcvette: lcvette goes to get a cigar
08:55 PM Lcvette: im on phone
08:57 PM TurBoss: wow
08:57 PM TurBoss: great day!
08:57 PM TurBoss: hahaha
08:57 PM TurBoss: I'm exicted!
08:57 PM TurBoss: 🙂
08:57 PM Lcvette: Phenomenal day
08:58 PM Lcvette: Pendant got resolved, probing was tested and works, ATC works, bearing cars fixed
08:59 PM Lcvette: If we get notifications working I think we are really close
08:59 PM * TurBoss uploaded an image: image.png (79KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/eZdzxxbOaBcabJyPCXZcEXqr >
08:59 PM TurBoss: \O/
08:59 PM TurBoss: * \o/
08:59 PM Lcvette: WHAT£=€=€°€°¢=¢
09:00 PM Lcvette: You did it already?
09:00 PM TurBoss: I just click spam
09:00 PM TurBoss: the box
09:00 PM TurBoss: yea
09:01 PM Lcvette: That's fantastic
09:01 PM TurBoss: but the popup is a must
09:01 PM TurBoss: no?
09:02 PM Lcvette: i can add an led somewhere on the fixed lower page
09:02 PM Lcvette: heading inside to dev ccomp-uter
09:02 PM Lcvette: back in a sek
09:02 PM TurBoss: ok
09:04 PM Lcvette: booting dev
09:05 PM Lcvette: did you push that?
09:05 PM TurBoss: no
09:05 PM TurBoss: I just draged the widget
09:05 PM TurBoss: from the designer
09:05 PM TurBoss: NotificationWidget in the widget list
09:06 PM TurBoss: it has buttons with filters
09:06 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/NKqZAKKnnnSthjHgFkfxgrDG >
09:06 PM Lcvette: error loading
09:06 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/jkGGcrxqUTVIuPUSqMWFAMXf >
09:07 PM TurBoss: pip install pyqtgraph
09:07 PM TurBoss: or apt install python-pyqtgraph
09:07 PM TurBoss: doesn't matter
09:10 PM Lcvette: ok have the notifications widget on the status page
09:10 PM TurBoss: okay
09:10 PM Lcvette: o/ hazzy
09:11 PM TurBoss: oik
09:11 PM TurBoss: create a branch and push
09:11 PM TurBoss: I'll check and merge on master
09:11 PM Lcvette: im looking where to add the LED
09:11 PM TurBoss: how would the led work?
09:12 PM Lcvette: dunno
09:12 PM TurBoss: lol
09:12 PM Lcvette: thought you said it would work?
09:12 PM Lcvette: lol
09:12 PM TurBoss: I can add a signal
09:12 PM Lcvette: ok
09:12 PM TurBoss: ok give me a sek
09:17 PM Lcvette: 40
09:18 PM TurBoss: ?
09:18 PM TurBoss: :)
09:19 PM Lcvette: dual pc's
09:19 PM Lcvette: roamed to the wrong side
09:19 PM Lcvette: lol
09:19 PM TurBoss: hehe
09:26 PM TurBoss: @hazzy do you rememeber how we do widget signals?
09:27 PM TurBoss: can't remember lol
09:28 PM hazzy-m: hey!
09:28 PM TurBoss: Hi!
09:28 PM hazzy-m: I think so lkol
09:28 PM Lcvette: o/
09:28 PM hazzy-m: what are you trying to do?
09:28 PM TurBoss: send a signal to a led from the notification widget
09:28 PM * hazzy-m reads the log
09:28 PM TurBoss: wow we did a log talk :D
09:29 PM TurBoss: * wow we did a long talk :D
09:29 PM Lcvette: to abutton
09:29 PM hazzy-m: what fires the LED?
09:29 PM Lcvette: :D
09:30 PM TurBoss: new notification message arrived
09:30 PM Lcvette: that way it can say nbotification inside it
09:30 PM hazzy-m: ah ok
09:31 PM TurBoss: and a reset button?
09:31 PM TurBoss: to reset the led?
09:31 PM Lcvette: reset buttopn?
09:31 PM hazzy-m: yeah, how would it be reset?
09:31 PM Lcvette: i'll just make it a button
09:31 PM TurBoss: use a ledbutton xD
09:32 PM hazzy-m: Lcvette: have you started laying it out?
09:32 PM * Lcvette uploaded an image: Screenshot_2019-09-20_22-26-13.png (20KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/IOwJcvjLzVMVievyRkfsfYzv >
09:32 PM TurBoss: nice!
09:32 PM hazzy-m: nice!
09:32 PM Lcvette: I would like to make it so its transparent until active
09:32 PM TurBoss: hazzy: Lcvette just moved the atc stuff
09:32 PM hazzy-m: how about making the border of the notification button flash red?
09:32 PM Lcvette: then comes up Yellow
09:32 PM Lcvette: background
09:32 PM Lcvette: as a warning
09:33 PM hazzy-m: or that
09:33 PM Lcvette: been a while since i did anything in this im finding i have forgotten alot of it already
09:33 PM Lcvette: ok
09:33 PM Lcvette: dunno how
09:33 PM Lcvette: can you assist hazzy?
09:33 PM Lcvette: pushing
09:33 PM TurBoss: ok
09:33 PM TurBoss: I'll add the signal
09:34 PM TurBoss: if hazzy remembers how lul
09:34 PM Lcvette: pushed
09:34 PM TurBoss: ok
09:35 PM TurBoss: I'll figure
09:35 PM Lcvette: hazzy
09:35 PM Lcvette: r u avaiulable to tinkler?
09:35 PM Lcvette: tinker
09:36 PM hazzy-m: what we need is a new norification signal from the norification widget, and a way to reset it
09:36 PM Lcvette: that sounds good!
09:36 PM hazzy-m: r is on the wrong place on this keyboard lol
09:38 PM TurBoss: slot is fine
09:38 PM TurBoss: I saw some of them
09:38 PM Lcvette: r may be in the wrong place
09:38 PM TurBoss: in the wron place may be
09:38 PM TurBoss: haiku!
09:39 PM hazzy-m: haha
09:39 PM hazzy-m: miss that bot
09:39 PM TurBoss: he is having a nap
09:39 PM hazzy-m: Lcvette: what does clicking on the Notification buttin do? pop up a dialog?
09:40 PM TurBoss: reset?
09:40 PM Lcvette: no its just a signal to tell you to check the status page
09:40 PM Lcvette: where i put a big notification widget
09:40 PM Lcvette: otherwise you wouldn't know there was a notification to check
09:40 PM hazzy-m: ok
09:40 PM Lcvette: maybe could make it so it resets when pressed
09:40 PM TurBoss: yes
09:41 PM TurBoss: thats fine
09:41 PM Lcvette: maybe have it reset and take you to the status page?
09:41 PM TurBoss: ok
09:41 PM Lcvette: that would be cool
09:41 PM TurBoss: sound ok
09:41 PM hazzy-m: I like that
09:41 PM hazzy-m: should be easy enough
09:42 PM Lcvette: sweet!
09:42 PM hazzy-m: best to do that in probe_basic.py
09:42 PM Lcvette: ps did you see we got everything else working
09:42 PM hazzy-m: I'll have a go
09:42 PM hazzy-m: no
09:42 PM hazzy-m: HURRAY!!!
09:42 PM Lcvette: the notifications came when we wrestled with something that we found was a simple fix but no notifications hid the resolution from us
09:42 PM Lcvette: lol
09:42 PM Lcvette: probing works
09:42 PM TurBoss: lol
09:42 PM Lcvette: ATC all works
09:42 PM Lcvette: pendant works
09:43 PM Lcvette: bearing cars are replaced
09:43 PM hazzy-m: fandabulous!
09:43 PM Lcvette: was a productive day
09:43 PM TurBoss: \o//
09:43 PM Lcvette: \o/
09:43 PM TurBoss: ~o~
09:43 PM hazzy-m: what happend to the brearing cars?
09:43 PM Lcvette: they were the old clicking ones from the crash
09:43 PM Lcvette: i left them on until i got everything sorted with the pendant
09:43 PM Lcvette: just in case
09:44 PM Lcvette: lol
09:44 PM TurBoss: hurray!
09:44 PM Lcvette: hurray!
09:44 PM hazzy-m: good idea
09:44 PM Lcvette: \O/
09:44 PM * TurBoss is unable to find how to emit stuff
09:44 PM TurBoss: can't remember :(
09:45 PM TurBoss: hazzy: do you have a new lappy?
09:45 PM TurBoss: hurray!
09:45 PM TurBoss: just remembered lol
09:46 PM hazzy-m: TurBoss: yes, I got a Lenovo X1 carbon, but I haven't but linux on it yet
09:46 PM TurBoss: hmmm
09:46 PM TurBoss: nice..
09:46 PM hazzy-m: still using a brick I got from a dumpster lol
09:47 PM * hazzy-m uploaded an image: ima_3e15709.jpeg (182KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/ikGugnaZVBAztLysvjespQKU >
09:48 PM TurBoss: wow
09:48 PM TurBoss: just readin screen specs
09:48 PM TurBoss: are high lol
09:48 PM TurBoss: for a 14"
09:48 PM hazzy-m: yeah, almost too high
09:48 PM hazzy-m: some apps don't work lol
09:48 PM TurBoss: lol=
09:49 PM TurBoss: Student of the year!
09:49 PM TurBoss: hurray!
09:49 PM Lcvette: CAUSE THE APPS ARE FROM THE SAME ERA AS THE DUMPSTER BRICK
09:49 PM TurBoss: xD
09:49 PM Lcvette: LOL
09:49 PM Lcvette: whoops caps
09:55 PM * TurBoss uploaded an image: image.png (46KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/UPVDvFyXplVmiXbLIjqpCqoY >
09:55 PM TurBoss: nice buttons got the qss style
09:55 PM Lcvette: \o/
09:55 PM Lcvette: yes
09:55 PM Lcvette: :D
09:56 PM Lcvette: how do i change the All Notifications syle?
09:56 PM TurBoss: ah
09:56 PM TurBoss: you can't lol
09:56 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/QyTAvYEVbcSFKTkJRSAzusvQ >
09:56 PM TurBoss: :)
09:56 PM Lcvette: :o
09:56 PM TurBoss: you close :D
09:57 PM TurBoss: * you are close :D
09:57 PM Lcvette: i dunno what to do
09:57 PM TurBoss: ehhehehe
09:57 PM Lcvette: need a cheat sheet
09:57 PM Lcvette: lol
09:57 PM Lcvette: turboss halp
09:57 PM Lcvette: lol
09:57 PM TurBoss: firts the button led
09:57 PM TurBoss: stuff
09:57 PM Lcvette: i need a giant examples sheet for python
09:57 PM TurBoss: ah
09:57 PM TurBoss: cool
09:58 PM TurBoss: https://www.py4e.com/
10:11 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson created branch 03NotificationButton - 13https://git.io/fhCou
10:11 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson pushed 032 commits to 03NotificationButton [+0/-0/±3] 13https://git.io/Je3Nh
10:11 PM Not-5e4d: [02qtpyvcp] 07Lcvette 03ae62eba - add notification widget to status page and notification button to main
10:11 PM Not-5e4d: [02qtpyvcp] 07KurtJacobson 036f4d3d4 - WIP: try to change notification button border red on error
10:11 PM Lcvette: \o/
10:12 PM hazzy-m: I have to sleep, more in the morning
10:12 PM TurBoss: night
10:12 PM Lcvette: night
10:12 PM Lcvette: thanks Hazzy!
10:13 PM travis-ci: kcjengr/qtpyvcp#1082 (NotificationButton - 6f4d3d4 : Kurt Jacobson): The build passed.
10:13 PM travis-ci: Diff view : https://github.com/kcjengr/qtpyvcp/compare/ae62eba428c7^...6f4d3d40941e
10:13 PM travis-ci: Build details : https://travis-ci.org/kcjengr/qtpyvcp/builds/587740692
10:14 PM Lcvette: TurBoss: whatchu doin
10:15 PM Lcvette: lol
10:15 PM TurBoss: just checking what he did
10:15 PM Lcvette: hidden work
10:15 PM TurBoss: me
10:15 PM TurBoss: no
10:16 PM TurBoss: def onReturnPressed(self):
10:16 PM TurBoss: LOG.debug("Action entry activated with text: %s", self.text())
10:16 PM TurBoss: oops
10:16 PM Lcvette: \o/
10:16 PM * TurBoss uploaded an image: image.png (654KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/zlFQOQIzTwzBSHApDeDLBMMK >
10:17 PM TurBoss: a friend of mine did it
10:17 PM TurBoss: tomorrow wil machine it
10:17 PM TurBoss: is a footprint for warhammer
10:17 PM Lcvette: footprint?
10:17 PM TurBoss: hmmm
10:18 PM Lcvette: terrain layout?
10:18 PM * TurBoss uploaded an image: image.png (91KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/syUYMoAeSXAPiQYQMEIUwSGO >
10:18 PM Lcvette: gotcha
10:20 PM * TurBoss leaves the dev machine
10:20 PM Lcvette: k
10:20 PM Lcvette: night
10:28 PM TurBoss: night