#hazzy Logs
Sep 19 2019
#hazzy Calendar
07:19 PM Tom_L: test
07:20 PM TurBoss: hello
07:20 PM TurBoss: test success
07:21 PM Tom_L: added a log for you guys
07:21 PM TurBoss: cool thanks
07:21 PM Tom_L: jt said it might help
07:21 PM TurBoss: now we have 3
07:21 PM TurBoss: :)
07:21 PM Tom_L: oh
07:21 PM TurBoss: hurray!
07:21 PM Tom_L: well if you don't need it...
07:21 PM TurBoss: nono is ok
07:22 PM hazzy-m: I think my log server is down lol
07:22 PM TurBoss: im sorry if you missunderstood
07:22 PM hazzy-m: ha!
07:22 PM TurBoss: cool
07:23 PM Tom_L: index works too in a different way but you won't see that since there's only one day worth
07:23 PM -!- #hazzy mode set to +o by ChanServ
07:24 PM hazzy-m: logs: there you are, long time no see
07:24 PM logs: hazzy-m: today's log: http://irc-logs.kcjengr.com/hazzy/2019/09/19.html
07:24 PM Tom_L: ok i'm checkin out for now. you know where to find me
07:24 PM hazzy-m: now we have redundancy :D
07:24 PM hazzy-m: Tom_L: cu tom!
07:26 PM Lcvette: Tom_L: your here!!
07:26 PM * hazzy-m is tired, been a long week, and still on European sleep time lol
07:27 PM Lcvette: No
07:27 PM TurBoss: lol
07:27 PM Lcvette: Jet lag
07:27 PM hazzy-m: folded about 10000lbs of demo parts for a customer in Canada, each part was about 140" x 60" and 11ga -> 230bls
07:28 PM Lcvette: Hazzy, did you wow
07:28 PM hazzy-m: and then all the meetings and dinners, which is the most tireing part
07:29 PM hazzy-m: two move slightly smaler run offs and I'll be caught up from when I was gone for two weeks
07:29 PM Lcvette: Nice
07:30 PM * hazzy-m posted a file: BDBD193C-29B6-4304-96E3-2BB6FD04DA62.JPG (1773KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/FEJqPSsLAoQyIsOyYOLuEULs >
07:30 PM Lcvette: Hazzy is there some magic to get an mpg to move the axis's?
07:31 PM hazzy-m: yes
07:31 PM hazzy-m: you have to select the axis
07:31 PM hazzy-m: sek
07:31 PM Lcvette: Tom_l and I have terrible shot this thing for 2 days now and we see all the pins working but not able to make it move the axis's
07:31 PM Lcvette: I do on there pendant
07:31 PM hazzy-m: hmmm
07:32 PM Lcvette: Can see jog-x-enable go true, can see it cycle through the scales
07:32 PM Lcvette: Or y or z depending on knob position
07:32 PM Lcvette: See the mpg counts perfectly
07:33 PM Lcvette: But not sure what's missing
07:35 PM hazzy-m: do the joint jog-counts change?
07:37 PM Lcvette: Yes
07:37 PM hazzy-m: then the axis should move
07:37 PM Lcvette: One circle of the wheel counts 100 on the money
07:37 PM Lcvette: I know right?
07:37 PM hazzy-m: how about the axis jog-counts?
07:37 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/LSfGJIIGlQlxVTOHqwPRQNVv >
07:38 PM Lcvette: That's the hall file for it
07:38 PM Lcvette: Anything jump out that's missing or wrong?
07:38 PM hazzy-m: wild guess
07:39 PM hazzy-m: try: `net jogcounts joint.0.jog-counts axis.x.jog-counts`
07:39 PM hazzy-m: why do you only jog joints 1 2 and 3?
07:39 PM hazzy-m: joint 0 is usualy X
07:41 PM Lcvette: Sec, booting machine
07:41 PM Lcvette: on machine
07:42 PM Lcvette: you mean joints only or the 3 axis?
07:42 PM Lcvette: 3 axis because thats all that i have connected at the moment
07:42 PM Lcvette: i was reducing as many potential issue s as i could
07:44 PM Lcvette: hazzy here like this?
07:44 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/UiftyoYFaovETzgVuFkDRUGz >
07:48 PM hazzy-m: try this
07:49 PM * hazzy-m sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/eefQcjdnMUpKewnwJzefYXfp >
07:50 PM hazzy-m: joints count up from 0...
07:50 PM hazzy-m: so x is j0, y is j1, z is j2 etc,
07:51 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/QQHwiDvHouUOyPOCwUOcGLWG >
07:51 PM Lcvette: like so?
07:51 PM hazzy-m: yep
07:53 PM Lcvette: nothing
07:54 PM Lcvette: hazzy
07:54 PM Lcvette: same, no movement
07:55 PM TurBoss: @hazzy did the mpg stuff need a component?
07:56 PM TurBoss: or is mpg another component from linuxcnc
07:56 PM hazzy-m: TurBoss: yes, it is a custom comp
07:56 PM hazzy-m: Lcvette: did you install the MPG comp? Seems like its working if you get counts
07:57 PM Lcvette: whats that?
07:57 PM TurBoss: i was unsure the other day
07:57 PM Lcvette: lcvette doesn't know what component is
07:58 PM hazzy-m: well you can do it all in HAL, but I found it easier to write a comp LOL
07:58 PM hazzy-m: https://github.com/KurtJacobson/RF45-config/blob/master/hal-comps/mpg.comp
07:58 PM hazzy-m: Lcvette: did you follow my toutorial, or use something else?
07:59 PM TurBoss: so he must compile andd install it?
07:59 PM Lcvette: my wiring is direct, no bits or anything trick like you have since i have tons of pins from two boards available
07:59 PM Lcvette: so yours was very confusing
07:59 PM hazzy-m: yes, but if he was trying to use it and it was not installed LCNC would throw an error
08:00 PM hazzy-m: Lcvette: cool, so you don't need a comp
08:00 PM Lcvette: the only thing i have is the hal file and a line in the ini calling the hal file
08:01 PM Lcvette: side not, i just installed the update
08:01 PM * Lcvette uploaded an image: Screenshot_2019-09-19_20-53-06.png (287KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/PCJAFcqtfWRZdHvWUhncAhyx >
08:01 PM Lcvette: lol
08:01 PM hazzy-m: I think your good then
08:01 PM hazzy-m: aha!
08:01 PM hazzy-m: better
08:01 PM TurBoss: we are close...
08:01 PM Lcvette: almost
08:01 PM TurBoss: hurray!
08:01 PM hazzy-m: not you just need to update the QRC file it looks like
08:01 PM Lcvette: hurray!
08:01 PM Lcvette: missing the graphics file i think
08:02 PM Lcvette: i did not do the development install
08:02 PM Lcvette: this is the little install
08:02 PM Lcvette: think the graphic is from the qml maybe
08:03 PM Lcvette: turboss is that the same as you remember?
08:03 PM Lcvette: the wheel graphics were all in a qml graphics folder
08:03 PM TurBoss: could be!
08:03 PM Lcvette: hazzy: so for the pendant i have what i need but i have an error somewhere in the hal
08:04 PM * TurBoss has a duel
08:04 PM hazzy-m: o-
08:04 PM Lcvette: -o
08:04 PM hazzy-m: good luck
08:04 PM hazzy-m: yes, but were
08:05 PM hazzy-m: I almost wonder if its a scaling issue
08:05 PM hazzy-m: wait
08:05 PM Lcvette: scaling?
08:06 PM hazzy-m: Lcvette: is ` axis.x.jog-enable` going true?
08:07 PM hazzy-m: when you select the x axis?
08:07 PM Lcvette: sec while i pull it up
08:09 PM Lcvette: no
08:09 PM Lcvette: is that it?
08:09 PM hazzy-m: yes, absolutly
08:09 PM hazzy-m: that must be enabled for the axis to jog
08:09 PM Lcvette: how to enable?
08:10 PM hazzy-m: that should be enabled by the axis selector switch
08:15 PM Lcvette: the pin switches
08:15 PM Lcvette: but im not seeing jog enable go true
08:15 PM Lcvette: wording in the hal maybe?
08:15 PM Lcvette: hazzy
08:15 PM Lcvette: ^^^
08:16 PM Lcvette: input 20, 21, 22 show being switched
08:17 PM hazzy-m: no, that wording should not change
08:18 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-12-21.png (44KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/ekvthmZBwFugoXyRxWyEzvcD >
08:18 PM Lcvette: the tyellow light changes to red when i switch axis
08:19 PM Tom_L: still playing red light green light?
08:19 PM Lcvette: yes
08:19 PM Lcvette: lol
08:20 PM Tom_L: you're using the qt interface now right?
08:20 PM Lcvette: yes
08:21 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-15-21.png (43KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/MtzDgueetGHAoOjKQAfurJTA >
08:21 PM Lcvette: jopint input changes but axis input does not
08:21 PM Lcvette: do i need something that called for both to be enablked?
08:21 PM Tom_L: and them both to the enable line in the hal
08:21 PM Lcvette: hazzy tom_l
08:21 PM Lcvette: ?
08:22 PM Tom_itx: net x-jog-select joint.0.jog-enable axis.0.jog-enable <= hm2_7i92.0.7i77.0.0.input-20
08:23 PM Tom_L: changing to joint has been a clusterfuck imo
08:23 PM Tom_L: change those 3 lines and see if that helps
08:23 PM Tom_L: it can't hurt
08:24 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/SCEaeZqWonWuXruTuasioyuJ >
08:24 PM Tom_L: and?
08:24 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-19-05.png (67KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/HBXlDMUpjSlYKdhSXGXiEnfc >
08:24 PM Lcvette: that old chestnut nagain
08:25 PM Tom_L: ok remove them
08:26 PM Tom_L: why are you running master anyway?
08:26 PM Lcvette: hazzy says we have too with qtpyvcp
08:27 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-21-39.png (54KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/RupybYIfdTodTRqqlMlpxKFz >
08:27 PM Lcvette: if it doesn't exist then why is itn showing here?
08:27 PM Lcvette: seems like something is messed up somewhere
08:28 PM Tom_L: just part of the clusterfuck
08:28 PM Lcvette: :(
08:29 PM Lcvette: who woiuld be well versed in master?
08:29 PM Tom_L: whomever has made the latest changes
08:32 PM Lcvette: busted
08:32 PM Lcvette: :(
08:32 PM Lcvette: feel like its soo close but can't get there
08:32 PM Lcvette: disheartening
08:32 PM Tom_L: it would be nice if you could test it on 2.7 or 2.8
08:33 PM Lcvette: maybe throw it on the forum?
08:34 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-28-41.png (198KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/SwhMQHasgooYiEQjNSHVDpMD >
08:34 PM Lcvette: but iots sooo nice
08:34 PM Lcvette: lol
08:35 PM Tom_L: not if nice doesn't work
08:35 PM Lcvette: It's gotta be something simple
08:36 PM Tom_L: too many untested variables for me
08:36 PM Tom_L: 2.9, mpg.hal, qtpyvcp
08:36 PM Lcvette: 2.8 has joints too though
08:37 PM Tom_L: but it still allows axis use
08:37 PM Lcvette: Qtpyvcp is just an gui
08:37 PM Tom_L: i ran it on my mill with my 2.7 config
08:37 PM Lcvette: What?
08:37 PM Lcvette: Qtpyvcp?
08:37 PM Tom_L: i don't know that joint has been fully tested and proven to work
08:38 PM Tom_L: axis.0 on 2.8
08:38 PM Tom_L: instead of joint.0
08:38 PM Tom_L: there could be lingering code that may address axis and not joint for all i know
08:38 PM Lcvette: Maybe that the issue?
08:39 PM Tom_L: i'm saying there are too many variables to diagnose at once
08:39 PM Lcvette: Can I go back to 2.8?
08:39 PM Tom_L: can you?
08:39 PM Tom_L: you have my blessing
08:39 PM Lcvette: Without a whole reinstall I mean?
08:39 PM Tom_L: did you keep your old config that was converted?
08:40 PM Lcvette: No, I skipped from 2.7 to 2.9
08:40 PM Tom_L: 2.7 should work fine
08:40 PM Tom_L: i'm using it on 2.8
08:40 PM Tom_L: go back to 2.7 if you want
08:41 PM Tom_L: or leave it like it is and try to fix it
08:41 PM Tom_L: up to you
08:41 PM Lcvette: Qtpyvcp must run 2.8 the docs say
08:42 PM Tom_L: that's why i installed it on my test pc
08:42 PM Tom_L: so i could play with it
08:42 PM hazzy-m: yes, but this is not a 2.7 vs. 2.8 issue
08:42 PM hazzy-m: QtPyVCP will work with both 2.8 or 2.9
08:42 PM Tom_L: no but it could be a joint vs axis issue
08:42 PM hazzy-m: Lcvette: is the machine homed?
08:42 PM Lcvette: yes
08:43 PM hazzy-m: all homed?
08:43 PM Lcvette: and jogs fine with screen buttons
08:43 PM Lcvette: yes
08:43 PM hazzy-m: you can run a MDI command?
08:43 PM Lcvette: yes
08:43 PM hazzy-m: ok
08:43 PM hazzy-m: need something like teamviewer lol
08:44 PM Lcvette: did you see that the watch changed
08:44 PM Lcvette: yellow to red for joint.0.jog-enable
08:44 PM Lcvette: but stayed in the false state
08:44 PM Tom_L: i feel fairly confident the thing is wired right and signals are getting to linuxcnc
08:45 PM hazzy-m: I agree
08:46 PM Tom_L: oh
08:46 PM Tom_L: be sure to take it out of Estop :D
08:46 PM Lcvette: won't home in estop
08:46 PM Lcvette: lol
08:46 PM Lcvette: i home before every test
08:46 PM Lcvette: change etc
08:47 PM Tom_L: check your way lube. you're gonna run out testing
08:47 PM Lcvette: its empty
08:47 PM Lcvette: beep beep beep beep beep beep beep
08:47 PM hazzy-m: what do you have jog-scale set to for each axis?
08:47 PM Lcvette: default is .0001
08:48 PM Lcvette: X10 is .001
08:48 PM Lcvette: x100 is .01
08:48 PM Tom_L: does that change in watch?
08:48 PM Lcvette: yes
08:48 PM Lcvette: we tested that last night
08:48 PM Tom_L: at the joint or at jogscale variable?
08:48 PM Lcvette: it showed it changing between the scales with the selector switch
08:48 PM hazzy-m: sure? shows as 0 on my offline sim
08:49 PM hazzy-m: for each axis?
08:49 PM Lcvette: sec ill show
08:50 PM hazzy-m: thx
08:51 PM * hazzy-m uploaded an image: image.png (48KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/gcDjuOJArUsliVTXNfdXnrEl >
08:52 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-46-53.png (45KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/CubJMzgQDipzVhfYHZokssyj >
08:52 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-46-35.png (45KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/LkkBbhcAriOAXmvlsKPsCZKx >
08:53 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-46-18.png (45KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/McSYsCFNrNfAhFZSywikJCBj >
08:53 PM hazzy-m: ok
08:53 PM Lcvette: thats all 3 selector positionsd
08:53 PM Lcvette: good?
08:54 PM hazzy-m: well, are you certain sure it is not actualy moving?
08:54 PM Tom_L: yeah but they might be a decimal off but i wouldn't change that until it's working
08:54 PM Tom_L: put a dial indicator on an axis and watch it
08:54 PM hazzy-m: what do all three have the same value? sould not it be .01, .001 and .0001 or something similar?
08:55 PM hazzy-m: why*
08:55 PM Tom_L: the axis?
08:55 PM Tom_L: the scale goes to all the axis at once
08:55 PM Tom_L: the other selector selects which axis is active
08:56 PM hazzy-m: ah, I thought he meant scale switch positions
08:56 PM Tom_L: no scale is movement per mpg tick
08:56 PM * Lcvette uploaded an image: Screenshot_2019-09-19_21-50-35.png (49KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/CzHFpnuBUjrVaxfEclkfRctr >
08:57 PM Tom_L: so why is enable not enabled?
08:57 PM Lcvette: joint.0.jog-counts shows movement
08:57 PM Lcvette: joint.0.jog-enable changes with the axis selector switch
08:57 PM hazzy-m: the only way that can show counts but not cause motion is if the axis is not enabled
08:58 PM Tom_L: ok hold on a sec
08:58 PM Lcvette: but axis.x.jog-enable does not
08:58 PM hazzy-m: axis.x.jog-enable also has to be TRUE
08:58 PM Lcvette: but anytime we try and put axis.anything on the hal it errors on load
08:58 PM hazzy-m: that is your problem
08:59 PM Lcvette: it says axis.x.jog-enable does not exist
08:59 PM hazzy-m: ah, sounds like a loading order problem
09:00 PM Lcvette: dunno what a loading order probnlem is
09:00 PM Tom_L: Lcvette remember when i told you to put stuff at the top of the hal?
09:00 PM hazzy-m: can you upload your main hal file?
09:00 PM Tom_L: loadrt
09:00 PM Tom_L: etc
09:00 PM Lcvette: sec
09:01 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/miCJIUbEjKZEmNOVJfWNcPLM >
09:01 PM Lcvette: main hal
09:01 PM Lcvette: ^^^
09:01 PM Tom_L: i have one more thing to try
09:02 PM Lcvette: k
09:03 PM hazzy-m: looks aok from a quick glance
09:03 PM * hazzy-m needs to sleep
09:03 PM Tom_L: i'm looking for the syntax
09:03 PM Lcvette: k
09:04 PM Tom_L: reverse the logic on the enable pin on 7i77
09:04 PM Tom_L: make it not
09:04 PM Tom_L: http://linuxcnc.org/docs/2.8/html/drivers/hostmot2.html
09:05 PM Tom_L: i lost your mpg.hal file...
09:05 PM * Lcvette sent a long message: < https://matrix.org/_matrix/media/v1/download/matrix.org/ySBsdubbErZgngBksOdwTMSr >
09:06 PM Lcvette: mpg.hal
09:06 PM Lcvette: ^^^
09:06 PM Lcvette: Tom_L: ^^^
09:06 PM Lcvette: i don't see how to reverse the 7i77 pin
09:08 PM Tom_L: net x-jog-select joint.0.jog-enable <= hm2_7i92.0.7i77.0.0.input-20 in_not
09:08 PM Tom_L: net x-jog-select joint.0.jog-enable <= hm2_7i92.0.7i77.0.0.input-20 .in_not
09:08 PM Tom_L: might need the '.'
09:10 PM Tom_L: http://linuxcnc.org/docs/2.8/html/drivers/hostmot2.html
09:10 PM Tom_L: 12.1
09:11 PM Lcvette: in_not does not exist same with the .in_not
09:11 PM Tom_L: some other syntax on that board then
09:11 PM Tom_L: pretty sure you can do it
09:11 PM * Lcvette uploaded an image: Screenshot_2019-09-19_22-05-57.png (64KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/WtFinEVcdEvGmiplSlNozyMJ >
09:11 PM TurBoss: that file may be ignored by the updater
09:12 PM TurBoss: the axis vs joints
09:12 PM Tom_L: yeah, he changed them to joint in it i think
09:12 PM TurBoss: there is a space before the fot
09:12 PM TurBoss: * there is a space before the dot
09:12 PM Lcvette: yes i had the space before dot
09:12 PM Lcvette: 20 .in_not
09:13 PM Lcvette: we changed everything that said axis to joint or it wouldnt load
09:13 PM Lcvette: would give error saying that axis.x.whatever did not exist
09:13 PM Tom_itx: net button-tool-change hal_manualtoolchange.change_button <= hm2_[HOSTMOT2](BOARD).0.gpio.038.in_not
09:13 PM Tom_L: i'm using that on a pin
09:13 PM Tom_L: remove the space
09:13 PM Lcvette: ok
09:14 PM Tom_L: been too long for me to remember it all
09:14 PM Lcvette: does not exist same error
09:14 PM Tom_L: i call bull shit
09:15 PM Tom_L: ask pcw the syntax for that on the 7i77 board
09:15 PM Tom_L: tomorrow
09:15 PM Tom_L: or when he's awake
09:15 PM Tom_L: then test it
09:15 PM * Lcvette uploaded an image: Screenshot_2019-09-19_22-09-50.png (66KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/KHttgLvGEJtUveddKMypsRcD >
09:15 PM Lcvette: for realz ^^^
09:16 PM Lcvette: 2.9 why have you foresaken me
09:16 PM Lcvette: lol
09:16 PM TurBoss: lol
09:17 PM Tom_L: you use .invert_output if it's an output pin that needs it
09:17 PM Tom_L: and in_not - (Bit, Out) Inverted state of the hardware input pin. Both full GPIO pins and I/O pins used as inputs by active module instances have this pin.
09:17 PM Lcvette: i should try that?
09:17 PM Tom_L: no
09:17 PM Lcvette: thought these were inputs
09:17 PM Tom_L: it's not an output
09:17 PM Lcvette: lol
09:17 PM Tom_L: i'm just teaching you
09:17 PM Lcvette: im working on 3 hours of sleep
09:18 PM Tom_L: i'll sleep when i'm dead
09:18 PM Lcvette: lol.. i am susceptible to influendce
09:18 PM Lcvette: influence too
09:18 PM Lcvette: turboss why you break the pendant?
09:18 PM TurBoss: booooo
09:18 PM Lcvette: lol
09:19 PM Lcvette: ok ok you didnt break it
09:19 PM TurBoss: cool
09:19 PM Lcvette: did you look and see if the wheel for the atc is in a special file that needs to be updated?
09:20 PM TurBoss: the images?
09:20 PM Lcvette: for the atc wheel
09:20 PM Lcvette: i think they are in a sopecial qml file
09:21 PM Lcvette: not in the main images folder
09:21 PM Lcvette: it was in the qml directory
09:21 PM Lcvette: if memory serves
09:21 PM Tom_L: i left a note for pcw
09:23 PM Lcvette: <Lcvette "if memory serves"> Tom_L: thank you
09:26 PM Tom_L: ok let's try one more thing
09:26 PM Tom_L: you game?
09:26 PM Lcvette: Yeah
09:27 PM Lcvette: Let her rip sensei
09:27 PM Tom_L: net x-jog-select joint.0.jog-enable <= hm2_7i92.0.7i77.0.0.gpio.20.in_not
09:28 PM Tom_L: do those pins (20 21 22) have any special function assigned to them?
09:29 PM Lcvette: only whats in the mpg.hal
09:30 PM Tom_L: give that a try on the 3 lines (comment out the old ones and keep em)
09:30 PM * Lcvette uploaded an image: Screenshot_2019-09-19_22-24-51.png (65KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/GEhOjMLdJpvdIzMUjAKNgNuQ >
09:31 PM Tom_L: ok remove the .in_not and try it
09:31 PM Tom_L: i wanna see if that syntax is valid
09:32 PM * Lcvette uploaded an image: Screenshot_2019-09-19_22-26-35.png (60KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/nyATRQjKsXgTfjQKnURkCkOA >
09:32 PM Tom_L: seems to me you may have one too many .0's in those lines
09:32 PM Tom_L: ok so it likes your other syntax
09:32 PM Tom_L: revert back to that
09:33 PM Lcvette: k
09:33 PM Tom_L: net x-jog-select joint.0.jog-enable <= hm2_7i92.0.7i77.0.input-20
09:33 PM Tom_L: try that just on one line
09:33 PM Tom_L: i wanna see if there's too many '0's in the line
09:33 PM Tom_L: probably not
09:34 PM * Lcvette uploaded an image: Screenshot_2019-09-19_22-28-45.png (67KB) < https://matrix.org/_matrix/media/v1/download/matrix.org/pcXUNxbvbsRJvkGynFfDYSBf >
09:34 PM Lcvette: error again
09:34 PM Tom_L: ok put the .0 back
09:35 PM Lcvette: k
09:35 PM Tom_L: just trying to eliminate everything
09:35 PM Lcvette: sure
09:35 PM Lcvette: im with ya
09:35 PM Tom_L: wait for pcw's reply
09:35 PM Lcvette: this is mind scrambling
09:35 PM Lcvette: ok
09:35 PM Tom_L: on inverting the logic on the pin
09:35 PM Tom_L: no
09:36 PM Tom_L: it's methodological
09:36 PM Lcvette: i dunno if this hal is even whats needed, i pulled it from the forums in a search
09:36 PM Tom_L: the pins are working
09:37 PM Tom_L: the enable is not changing state
09:37 PM Tom_L: right?
09:37 PM Lcvette: it dopes for joint
09:37 PM Lcvette: not for axis
09:37 PM Lcvette: well wait when you say state you mean true or false?
09:37 PM Tom_L: yes
09:37 PM Lcvette: it does not change true or false
09:38 PM Lcvette: but the other window with the red and yellow led does change
09:38 PM Lcvette: am i explaining that clearly?
09:38 PM Lcvette: tom_l?
09:38 PM Tom_L: i got it
09:39 PM Lcvette: k
09:39 PM Lcvette: and nothing with the word axis in it changes
09:39 PM Lcvette: not counts, enable etc
09:39 PM Lcvette: only joints
10:34 PM Lcvette: That sucks