#garfield Logs

Oct 02 2023

12:43 PM aandrew: well I'm just using mastodon.social right now (anotherandrew@mastodon.social) but I'll be setting up my own instance at some point
08:31 PM rue_shop2: D485506G5-35
08:40 PM rue_shop2: CY7C1329H
09:16 PM rue_mohr: detachable hinge is the name of what I want on the CNC guard
09:16 PM rue_mohr: OR...
09:16 PM rue_mohr: come to think of it...
09:16 PM rue_mohr: no, I should not use magnets
09:26 PM Tom_L: don't cut steel if you do
09:26 PM rue_mohr: heh
09:27 PM rue_mohr: I'll just get the two part hinges
09:27 PM Tom_L: i made a U for the top to fit the bottom on mine
09:27 PM Tom_L: so i can have 2 levels of guard
09:27 PM rue_mohr: I'v tried to get shavings off magnets before and come to the conclusion its a room best not entered.
09:27 PM Tom_L: air compressor
09:28 PM rue_mohr: https://twitter.com/RueNahcMohr/status/1708688665650897288
09:28 PM rue_mohr: see if it will play, its the only progress on anything I did this weekend
09:29 PM Tom_L: yup
09:29 PM rue_mohr: I am on call with work, and there have been a lot of calls
09:29 PM rue_mohr: "5" relays
09:29 PM rue_mohr: pretty damn good
09:29 PM rue_mohr: there are 6 cause I was short contacts
09:30 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/Mill_Steel/Assembly/Final/chip_guards/Chip_guard5.jpg
09:30 PM Tom_L: i can have a low or high guard
09:30 PM rue_mohr: mmm
09:30 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/Mill_Steel/Assembly/Final/chip_guards/Chip_guard4.jpg
09:30 PM rue_mohr: hey whats your working size on that?
09:30 PM Tom_L: the back part with the clothes pin is very thin so it will flex on fuckups
09:31 PM rue_mohr: :]
09:31 PM rue_mohr: oh I had an email for a sprayer order
09:31 PM rue_mohr: the fellow said he wanted to know how to get info for his boss to make an order
09:32 PM Tom_L: 13 x 17.75 x 7 ish
09:32 PM rue_mohr: was on the 27th, I didn't miss it TOOOO badly :/
09:32 PM rue_mohr: xy>12"?
09:33 PM rue_mohr: thats not X x Y x Z is it?
09:33 PM Tom_L: X - 17" Y - 13 Z - 7
09:34 PM rue_mohr: wow, I never realized you had that much overhang
09:34 PM Tom_L: oh i had those backwards the first time :)
09:35 PM Tom_L: i cut about a foot off one of the ballscrews too.
09:35 PM rue_mohr: yea I guess with the standoff tube its pretty good
09:35 PM Tom_L: i could have done a better job managing where i put them
09:35 PM rue_mohr: I'm gonna get some sleep now incase a call comes in at 2am
09:35 PM Tom_L: i'm about to anyway. head cold
09:36 PM Tom_L: you can see the cut area from that pic where i put the drain trough
09:36 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/Mill_Steel/Assembly/Final/chip_guards/Chip_guard4.jpg
09:37 PM rue_mohr: :)
09:37 PM rue_mohr: I need to focus on a project thats not a silly distraction
09:37 PM rue_mohr: tho I REALLY LIKE the way that display came out
09:37 PM Tom_L: i got a drain tube in the rr corner i hang a bucket there
09:37 PM rue_mohr: :]
09:38 PM rue_mohr: one of the people on twitter posted a pic of a mister on a horizontal bandsaw that I found inspring
09:38 PM rue_mohr: mister
09:38 PM rue_mohr: ...
09:38 PM * rue_mohr segfaults
10:01 PM rue_mohr: https://twitter.com/diconx/status/1708891855213990122 wow CNC... I think
10:24 PM aandrew: oh wow