#garfield Logs

Jan 02 2023

03:15 PM rue_mohr: well, I got the programmer to write the 2732 I needed for a repair
04:26 PM polprog: good job!
05:40 PM Tom_L: https://www.turnoff.us/geek/tdd-vs-ftt/
07:50 PM rue_mohr: heh
07:50 PM rue_mohr: how many years did I try to tell people to do atomic tests and then assemble the final program with them
07:51 PM rue_mohr: nobody would or ever will listen
08:09 PM polprog: fuck
08:09 PM polprog: turns out the yaesiu fth-1011 does not work with the "universal yaesu cable"
08:09 PM polprog: the pinout is different
08:10 PM rue_mohr: ? whats that/
08:10 PM polprog: i traced it and made a *proper* cable, now I can reprogram the radio
08:10 PM polprog: its a 29-50MHz radio
08:10 PM rue_mohr: radio
08:10 PM polprog: yaesu*
08:10 PM polprog: i dont have a ham licence but 40-50MHz is a nice enough frequency for experiments with RF mixing
08:11 PM polprog: so i programmed a few "round" frequencies to the radio that I bought on the bazar a few months ago
08:11 PM polprog: it seems to be working
08:11 PM polprog: i need to make up something that can modulate me an FM signal
08:12 PM polprog: https://polprog.net/rozne1/ircjunk/uhffun/yaesu/fth1011.txt
08:18 PM polprog: I have another radio which can receive at 150 MHz so if i were to modulate a 100MHz signal
08:18 PM polprog: er
08:18 PM polprog: mix a 100M signal with a modulated 50M signal then i should hear it at 50 and 150MHz
08:26 PM polprog: goodnight
11:18 PM rue_shop1: I'm not good with radio
11:20 PM rue_shop1: I cant find the notes on what the resolution was going to be for the plasma cnc
11:20 PM rue_shop1: iirc quite low
11:20 PM rue_shop1: being what plasma cut edges are like