#garfield Logs

Nov 09 2022

12:58 AM rue_mohr: didn't get to sleep
01:08 AM rue_mohr: now I'm awake
01:14 AM rue_mohr: what I was looking for is how any 'about my personality' is phrased
01:14 AM rue_mohr: there is a bit of it, but it looks like the examples online are pretty cut and cold
01:15 AM rue_mohr: "We don't care if your a nice person, just show up and put the sprinkles on the donuts" kinda cold
01:18 AM rue_mohr: “Unless specifically requested, references do not belong on a resume. It is almost never a good idea to include them….” “As a rule of thumb, you don't need to include references in your resume.” “Do not put 'Reference available upon request', or the names and contact points of the references themselves.”
01:18 AM rue_mohr: says google
01:18 AM rue_mohr: oh my
01:18 AM rue_mohr: ok
01:19 AM rue_mohr: thats easier, cause I been working for the last company for 15 years and my old references are kinda gone
07:59 PM rue_mohr: https://m.all3dp.com/2/3d-printed-injection-mold/
08:43 PM rue_mohr: so, I have a toothed pulley for the encoders on the cnc
08:43 PM rue_mohr: the encoders are 6mmshaft, and the pulleys are 5mm
08:43 PM rue_mohr: how much do you think I can take off at once with a ream?
08:43 PM rue_mohr: my instinct is, less than that
08:46 PM Tom_L: .010"
08:47 PM Tom_L: 25 would be quite a bit
08:47 PM rue_mohr: .25mm
08:48 PM rue_mohr: so, start at 5.5 or a bit bigger
08:48 PM rue_mohr: ok
08:48 PM Tom_L: .025
08:48 PM Tom_L: 1mm difference is about .025"
08:48 PM rue_mohr: units 10thou mm
08:48 PM rue_mohr: * 0.254
08:48 PM rue_mohr: ?
08:48 PM Tom_L: .254 is a quarter inch
08:49 PM rue_mohr: mm
08:49 PM rue_mohr: .254mm
08:49 PM rue_mohr: heh
08:49 PM Tom_L: nevermind. you'll see it in a bit
08:49 PM rue_mohr: its'll take me a while to center these up properly
08:49 PM rue_mohr: but I'm supposed to be working on something else
08:50 PM rue_mohr: EVERYWHERE I have things that need doing
08:50 PM rue_mohr: I cant concentrate at all
08:50 PM Tom_L: 6mm shaft 5mm hole is 1mm difference which is .025" approx
08:50 PM rue_mohr: I sat down to draw up a circuit for keeping the voltage down on the CNC motor driver
08:51 PM rue_mohr: 1mm diff, 2*0.5mm
08:51 PM rue_mohr: if I take a max of 10 thou off, which is .25mm, my smallest start size is 5.5mm
08:51 PM rue_mohr: or did you mean 10 thou dia?
08:52 PM Tom_L: uh huh
08:52 PM rue_mohr: k, so
08:52 PM rue_mohr: 5.75mm max start
08:53 PM Tom_L: but
08:53 PM Tom_L: if nobody was looking over my shoulder, i'd run that reamer right thru there
09:48 PM rue_mohr: I made it as a special set, I dont want to hurt them
09:49 PM rue_mohr: I got them for making valves, but I dont have a design I can do
09:52 PM Tom_L: so it's not a pulley on a shaft
09:53 PM rue_mohr: its a synchro pulley for the shaft of the encoder
09:53 PM rue_mohr: oh right yea
09:54 PM rue_mohr: but I need to work out the overvoltage thing for the cnc
09:54 PM Tom_L: resume done?
09:54 PM rue_mohr: no, I work on it when my head is clearer
09:55 PM rue_mohr: I just need to reword the summary
09:55 PM Tom_L: have hardhat, will work
09:55 PM Tom_L: you shouldn't have a summary
09:55 PM Tom_L: bullet points to be expanded in the interview
09:56 PM rue_mohr: yes, I have all the experience, history, certicifations, schooling, etc etc
10:04 PM Tom_L: pm
10:05 PM Tom_L: that template was auto generated from a multi billion dollar company's site
10:06 PM Tom_L: so i saved it and have been using it since
10:07 PM rue_mohr: I just found a casting sand recipie
10:07 PM rue_mohr: it calls for 10% clay, not 30% :S
10:08 PM Tom_L: heh
10:08 PM Tom_L: i think it's a crap shoot