#garfield Logs

Oct 17 2022

12:15 AM rue_mohr: boop
11:52 AM rue_mohr: huh, my silly dip mounted cpld for 100 likes quick!
11:53 AM rue_mohr: ooo windy, I have to keep an eye on my tilt and pan mirror
11:54 AM rue_mohr: http://ruemohr.org/~ircjunk/tempimage/p1260196.jpg
11:54 AM rue_mohr: http://ruemohr.org/~ircjunk/tempimage/p1260200.jpg
11:54 AM rue_mohr: http://ruemohr.org/~ircjunk/tempimage/p1260201.jpg
12:54 PM rue_mohr: 3030
12:54 PM rue_mohr: its going for the moon!...
12:55 PM rue_mohr: polprog, could you tell me what ip you get for tiwtter.com?
01:18 PM rue_mohr: Tom_L, ?
01:38 PM Tom_L: ?
01:38 PM Tom_L: what you doin with that?
01:47 PM rue_mohr: I was borred
01:47 PM rue_mohr: seems my todo list items aren't fun and short enough
01:47 PM Tom_L: i got a tree you can come trim
01:48 PM rue_mohr: I hate driving
01:48 PM Tom_L: so do i
01:49 PM rue_mohr: I need to assemble the cnc motor driver
01:49 PM rue_mohr: all the parts are there
01:50 PM rue_mohr: I'm not quite sure what I want to do for connectors with 350VDC live on the output lines
01:50 PM Tom_L: screw terminals like inside a motor sometimes
01:50 PM rue_mohr: mmmm
01:51 PM rue_mohr: under a cover
01:51 PM Tom_L: wait.. maybe they don't do that now
01:51 PM Tom_L: i put my relay for the spindle inside a switch box with a blank cover
01:52 PM rue_mohr: something is failing on the phone system again
01:52 PM rue_mohr: not sure if its a fan or antoher hard drive
01:52 PM rue_mohr: I have a 3 drive mirrored raid in it right now
01:53 PM rue_mohr: https://twitter.com/redherring32/status/1574533499104608256/photo/1
01:53 PM rue_mohr: fellow took a 40 pin dip, sanded the back off down to the leads, then cut out around the die to make a SMT pakage of the chip
01:55 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/Mill_Steel/Spindle/Control_Pannel1.jpg
01:55 PM Tom_L: very top box has the 5v switched relay
01:55 PM Tom_L: for the vfd power
01:57 PM rue_mohr: nice.
01:57 PM rue_mohr: is that all mounted over the window?
01:58 PM Tom_L: no it's more toward the corner
01:58 PM Tom_L: shelf to the left
01:58 PM Tom_L: wall cabinet to the right
01:58 PM rue_mohr: :) light can still get in then
01:58 PM Tom_L: i keep the window covered
01:58 PM Tom_L: and added rebar after somebody kicked in the side door
01:59 PM rue_mohr: keep snoopythieves from temptation?
01:59 PM Tom_L: and a 2 x 4 blocking the door now
01:59 PM rue_mohr: did they get anything?
01:59 PM Tom_L: kids brand new bike
01:59 PM rue_mohr: :/
01:59 PM Tom_L: a car was parked inside so it was hard to get around
02:00 PM rue_mohr: did you watch craigslist for the bike after?
02:00 PM Tom_L: no
02:00 PM rue_mohr: stolen things tend to come up on craigslist/ebay
02:01 PM rue_mohr: thieves are unbelievably stupid. and amazingly lucky
02:02 PM Tom_L: if i'd have listened to the dog, he may have had some lead in his ass
02:03 PM rue_mohr: I wonder, if in kicad, I can make an alternate pcb for a schematic
02:51 PM rue_mohr: ah, I have to redo the root server list on my dns server
04:31 PM rue_mohr: wow guys
04:31 PM rue_mohr: I just had a roll of wire-wrap-wire I ordered from japan arrive
04:31 PM rue_mohr: it only took like 7 days!
04:32 PM Tom_L: they heard you were fed up with the chinamen
04:33 PM rue_mohr: oh you cant get this stuff
04:33 PM rue_mohr: its the etfe wire
04:33 PM rue_mohr: china only sells the low temp crap
04:33 PM rue_mohr: the insulation doesn't burn off this stuff when you get 1cm near it with an iron :)
04:38 PM polprog: rue_mohr: 104.244.42.129
04:41 PM rue_mohr: oh, same here
04:41 PM rue_mohr: interseting
04:41 PM rue_mohr: so when I make a static entry in my hosts file, everything sped up
04:43 PM rue_mohr: ideas on what to do with a breadboarded cpld?
04:43 PM rue_mohr: I was pondering a big 4017
04:43 PM rue_mohr: bit more than 10 outputs
04:51 PM Tom_L: kit led driver
04:52 PM Tom_L: but you must have 50 4017 in the drawer...
05:38 PM rue_mohr: well, yea, but a long one,
05:38 PM rue_mohr: I dunno
05:38 PM rue_mohr: 3033, is this out of control?
05:38 PM rue_mohr: was it ever in control?
05:42 PM Tom_L: ruetrol
05:47 PM rue_mohr: https://hackaday.com/2022/10/16/petamentor2-is-latest-to-turn-bottles-into-filament/
05:47 PM rue_mohr: oh
05:48 PM rue_mohr: you ... pull it thru?
10:16 PM rue_mohr: Tom_L, you use kicad?