#garfield Logs

Mar 19 2022

12:02 AM Tom_L: i'm nodding off.. should sleep soon
12:10 AM rue_mohr: almost there, one package left to find
12:11 AM Tom_L: my square blanks aren't that long
12:11 AM Tom_L: maybe 3'
12:11 AM Tom_L: "
12:11 AM rue_mohr: oh yay, these are for the vertical saw!
12:12 AM rue_mohr: yea, raw they come 8"
12:12 AM Tom_L: not mine
12:12 AM Tom_L: but i get them from the local guy
12:13 AM Tom_L: k, time to sleep
12:13 AM rue_mohr: ni
05:06 AM Tom_L: morning
07:44 AM polprog: morning
12:13 PM rue_bed2: morning
12:13 PM rue_bed2: whats on the list today then
12:13 PM rue_bed2: looks like its not raining
12:13 PM rue_bed2: thouht it would be raining all weekend
12:59 PM Tom_L: nap
01:06 PM Tom_L: thought about chopping up some more metal
01:07 PM Tom_L: that's as far as it got
01:16 PM rue_mohr: where did the energy go?
01:16 PM rue_mohr: I need mine back
01:21 PM rue_mohr: I was looking at redoing the handle design, but I cant work out how to do the radii on it
01:21 PM rue_mohr: not with the tools I have
01:22 PM rue_mohr: its too organic
01:23 PM Tom_L: went grocery shopping this morning
01:23 PM Tom_L: if i knew what you wanted i could do it up in SW or catia
01:23 PM rue_mohr: the problem is I need a model I can modify
01:24 PM rue_mohr: I think jester used sw for the existing one
01:24 PM rue_mohr: the idea is to change a hold and add a pocket
01:24 PM rue_mohr: but the model was already cut and mixed with another
01:24 PM rue_mohr: gets ugly
01:25 PM Tom_L: you don't have sw?
01:25 PM rue_mohr: like an old piece of equipment thats been modified 100x over 20 years since the prints that are available
01:25 PM rue_mohr: which is about any steam loco
01:25 PM Tom_L: or a dxf of the outline
01:25 PM rue_mohr: its on the windows laptop used for cam in the shop
01:26 PM rue_mohr: the outline doesn't exist for one of the handles
01:26 PM rue_mohr: as the model was post-modified
01:26 PM rue_mohr: its ugly
01:26 PM rue_mohr: like a...
01:29 PM Tom_L: what's the model you sent me?
01:29 PM Tom_L: ages ago
01:32 PM rue_mohr: I'm not sure
01:32 PM Tom_L: what about the one in the box?
01:32 PM rue_mohr: was it a handle?
01:32 PM Tom_L: i have a handle model yes
01:33 PM rue_mohr: the one in the box is the 6"+ model
01:33 PM rue_mohr: the 3" one is combined with the head
01:33 PM Tom_L: they are different?
01:33 PM rue_mohr: yes
01:33 PM Tom_L: mmm
01:33 PM Tom_L: what's the number?
01:33 PM rue_mohr: if you overlap them at the trigger pin, and use the front half of the A7 and the back half of A2, you have a B2
01:34 PM rue_mohr: when we made them, we didn't even know about the 3" version
01:34 PM rue_mohr: when asked, we realized thats what he's started with
01:34 PM Tom_L: this says A2
01:34 PM rue_mohr: the longer sprayers were a seperation of his 3" model
01:34 PM rue_mohr: A2 is a normal handle
01:34 PM rue_mohr: B2 is the 3" handle
01:34 PM Tom_L: and it looks like the one in the box
01:35 PM rue_mohr: yes
01:35 PM Tom_L: so what's different?
01:35 PM rue_mohr: http://www.ruemohr.org/p1090700.jpg
01:35 PM rue_mohr: see how its all crunched togethor?
01:35 PM Tom_L: oh
01:35 PM rue_mohr: yea
01:36 PM rue_mohr: thats the model the other guy did first
01:36 PM Tom_L: so the bottom is the same
01:36 PM Tom_L: including the trigger mount
01:36 PM rue_mohr: it transitions about at the pin for the trigger
01:37 PM rue_mohr: http://www.ruemohr.org/p1190526.jpg
01:37 PM Tom_L: the slot thru it the same?
01:37 PM rue_mohr: yup
01:40 PM Tom_L: do you have the outline of the other part?
01:40 PM rue_mohr: I just started a trace of A2 last night
01:40 PM Tom_L: i was gonna export the outline
01:40 PM rue_mohr: but I didn't bother because I cant get where I need
01:41 PM Tom_L: i have it here
01:41 PM Tom_L: i'm not that good with sw is all
01:41 PM rue_mohr: I was able to do the mods I wanted to A2, but I cant do them to B2
01:41 PM Tom_L: i have the outline drawing
01:41 PM Tom_L: why not?
01:42 PM rue_mohr: the stl is slightly broken in a way that makes me unable to edit it
01:42 PM rue_mohr: the funny thing is, I made it from two other stls
01:42 PM Tom_L: send it to itx
01:42 PM rue_mohr: so I might be able to go back and regenerate it while adding in the new mods I want
01:42 PM Tom_L: and i'll leave A2 alone
01:43 PM rue_mohr: I spent hours trying to "fix" the stl, it doesn't want to
01:43 PM Tom_L: using what?
01:43 PM rue_mohr: the slicer software for printing it, and a stl mesh editor
01:44 PM Tom_L: lemme try sw
01:46 PM Tom_L: do you have the A7 model?
01:48 PM rue_mohr: I have a few
01:51 PM rue_mohr: would you like to play with combining stls?
01:51 PM Tom_L: maybe i can merge the sketch with this A2 model
01:51 PM Tom_L: i could try anything once
01:52 PM rue_shop3: I'm trying to think of what all the other things are I'm supposed to be working on, on a sunny weekend day
01:52 PM rue_shop3: my software project right now is that card scanner
01:53 PM rue_shop3: but I have yard stuff I need to do
01:53 PM rue_shop3: I just dont knwo what it is
01:53 PM rue_shop3: I need to work out this steam engine stuff pronto
01:54 PM rue_shop3: in 2 years there is no way I will be able to afford or get gas
01:54 PM rue_shop3: electric is way too far out of my financial capabilities
01:54 PM Tom_L: is the top of B2 shorter than A2?
01:54 PM rue_shop3: no, they merge at the hole for the pin
01:55 PM Tom_L: the trigger pin?
01:55 PM rue_shop3: when I combined them, I just overlapped that pin and then cut the other halfs off
01:55 PM rue_shop3: yes
01:55 PM Tom_L: trying to figure out how A7 is oriented
01:55 PM rue_shop3: the models dont totally match up, they should tho, we made errors copying them
01:56 PM rue_shop3: how about I give you my new A7 model
01:56 PM Tom_itx: at least then maybe i can modify this A2 to work
01:57 PM rue_shop3: oh drat I didn't finish adjusting the hole
01:57 PM Tom_itx: one of the problems is some of the features are referenced from the front end of A2
01:57 PM Tom_itx: so i'll have to address that as i go
01:58 PM rue_mohr: stand by while I re-render
01:58 PM Tom_itx: A9 looks like it it cut off on the B2 pic you posted
01:59 PM Tom_itx: no.. it has the slot in it as well
01:59 PM Tom_itx: nevermind
01:59 PM rue_mohr: A9 is normal
01:59 PM Tom_itx: i'm thinking they're flat because that's how i sent them to you :)
01:59 PM rue_mohr: we had a great time with the WTF when we saw the 3" model
01:59 PM Tom_itx: you bend them
02:00 PM rue_mohr: http://ruemohr.org/%7Eircjunk/not_public_dont_open/proto-A7-r2-s.stl
02:01 PM rue_mohr: I was playing with that prototype last week on some reject parts, bent the tabs the wrong way ;)
02:01 PM Tom_itx: so A8 gets replaced on the 3" model with C3 or D3 right?
02:01 PM rue_mohr: they took the bend back the other way, but not well
02:02 PM rue_mohr: A8/A3 -> C3 or D3 depending on preffered length
02:02 PM Tom_itx: then you don't use the trigger on it
02:02 PM rue_mohr: no
02:02 PM Tom_itx: that makes sense then
02:03 PM rue_mohr: A8 and A3 combine
02:03 PM Tom_itx: do they still use the same pin hole location?
02:03 PM rue_mohr: c3 is a normal length trigger on it, D3 is a crazy long trigger
02:03 PM rue_mohr: yes, thats what I mean, the pins of A7 and A2 overlap and become the same
02:04 PM rue_mohr: the origional guy started with the 3" and split his design to become the extended one
02:04 PM rue_mohr: which is funny, cause the one I did before he was doing them, was a long design
02:04 PM rue_mohr: I have to wonder if he saw the one I did way back when
02:06 PM Tom_L: so part of the top of A2 will be cut off
02:06 PM Tom_L: so it can receive A9
02:07 PM rue_mohr: thats the fun slicey bit
02:07 PM rue_mohr: it needs the top of A7 that recieves A9
02:07 PM rue_mohr: fun yes?
02:07 PM rue_mohr: fun yet?
02:07 PM rue_mohr: you can open and view an stl, right?
02:08 PM rue_mohr: here
02:09 PM rue_mohr: http://ruemohr.org/%7Eircjunk/not_public_dont_open/B2.stl
02:09 PM rue_mohr: thats total hackery right there
02:10 PM Tom_L: distraction
02:10 PM rue_mohr: that A7 is a model I completely redid last week
02:11 PM Tom_L: what's wrong with it?
02:12 PM rue_mohr: so, the idea is to modify how the screw holds down A5
02:12 PM rue_mohr: right now were using plastic/wood screws into the plastic and its a nightmare
02:14 PM rue_mohr: so were switching to a system that uses a machien scerw and a square nut dropped into a hole
02:17 PM rue_mohr: I was able to modify the A2
02:17 PM rue_mohr: I'll send you a pic
02:20 PM rue_mohr: http://ruemohr.org/~ircjunk/tempimage/p1230168.jpg
02:20 PM rue_mohr: check this out ^^^
02:20 PM rue_mohr: the slot there takes a square 8-32 nut
02:20 PM rue_mohr: and then the hole thru the top is opened up to allow the screw to pass thru
02:22 PM rue_mohr: heh, $615usd ~> +$50 shipping
02:23 PM rue_mohr: heh, $615usd ~> +$50 shipping ~> 997cad + $50 border = $1057
02:23 PM rue_mohr: 50c ea
04:37 PM Tom_L: rue_mohr,
05:51 PM rue_mohr: ah, there you are
05:52 PM rue_mohr: sorry
05:52 PM rue_mohr: chain saws and family and gardens, it got busy
05:57 PM Tom_L: i'm gonna screenshot something i need your opinion on
05:59 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/merge1.jpg
06:00 PM Tom_L: does that look anything close to what you need?
06:01 PM Tom_L: the slot is just where A9 goes
06:02 PM Tom_L: or does it need to be repositioned?
06:02 PM Tom_L: that shape came off one of the stl images you gave me
06:03 PM Tom_L: i just drew the front half of it
06:22 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle.JPG
06:22 PM Tom_L: where to go from here
06:22 PM Tom_L: the trigger slot needs something
06:22 PM Tom_L: and the notch on the tip is no big deal
06:23 PM Tom_L: there is no tube right?
06:23 PM Tom_L: don't worry about the radius'd edges that's no big deal
06:24 PM Tom_L: i think the hole is too high but that's where it was between the 2 parts
06:25 PM Tom_L: and the tiny A9 locating hole isn't there yet
06:25 PM * Tom_L thumps rue_mohr on the head...
06:26 PM Tom_L: i could raise that part up so the 2 (A2 A7) bottoms were even instead of the hole
06:27 PM Tom_L: that would raise the hole up maybe 6-8mm
06:28 PM Tom_L: but i got the model where i can work with it some now
06:29 PM Tom_L: things were referenced off some very wrong features on the one you gave me
06:37 PM Tom_L: ok i found your pic of the red one
06:44 PM rue_mohr: somehow the postiion is not right at all
06:44 PM rue_mohr: hmm
06:44 PM rue_mohr: whats different
06:45 PM Tom_L: i aligned the holes but now i see that wasn't the right thing to do
06:45 PM Tom_L: i can move them easily though
06:45 PM Tom_L: getting ready to do that
06:45 PM rue_mohr: aligning the holes should have worked
06:45 PM rue_mohr: but its wrong
06:45 PM Tom_L: i'll align the top of the slot to the top of the handle
06:46 PM rue_mohr: the top edges should be the same
06:46 PM Tom_L: either that or the 2 bottoms
06:46 PM rue_mohr: they rest up against the pipe
06:46 PM rue_mohr: top should be more accurate
06:46 PM Tom_L: gimme a few and i'll have a new pic
06:48 PM Tom_L: this is just to see if we're on the right track...
06:49 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle2.JPG
06:49 PM Tom_L: that's the hole difference
06:49 PM Tom_L: we'll use the top one
06:49 PM rue_mohr: its more right, but there is a difference that confusing me
06:50 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle3.JPG
06:50 PM Tom_L: no i just put it in the general area
06:50 PM Tom_L: a few things need trimmed etc
06:51 PM Tom_L: that's why i'm asking
06:51 PM rue_mohr: the lower hole looks like the right one
06:51 PM Tom_L: http://www.ruemohr.org/p1090700.jpg
06:51 PM Tom_L: not by that pic
06:51 PM rue_mohr: ooo
06:51 PM rue_mohr: wt...
06:51 PM rue_mohr: now I'm more confused
06:52 PM Tom_L: i can mod it all day long now
06:52 PM Tom_L: just need to know what
06:52 PM rue_mohr: kinda exhauseted
06:52 PM rue_mohr: yard stuff
06:52 PM Tom_L: then i'll add the radius back in
06:53 PM Tom_L: one thing about it, you could print a couple layers to see what it looked like before you did a whole one
06:53 PM rue_mohr: o damnit I have to make those tubes
06:54 PM Tom_L: lemme align it to the bottoms once
07:00 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_bottom_aligned1.JPG
07:00 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_bottom_aligned2.JPG
07:01 PM Tom_L: that's with the 2 aligned at the bottom edge
07:01 PM Tom_L: ignore the extra cuts for now
07:01 PM Tom_L: those are leftovers
07:04 PM Tom_L: there i redid those 2
07:05 PM Tom_L: just need to figure out the position and what the top should look like
07:06 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_bottom_aligned3.JPG
07:06 PM Tom_L: and i need to add the A9 retainer hole
07:06 PM Tom_L: once we establish position
07:52 PM rue_shop3: I sent you a B2 model didn't I?
07:53 PM Tom_L: no
07:53 PM rue_shop3: hmm, just found one
07:53 PM Tom_L: i need some dimensions
07:53 PM rue_shop3: the hole is in the postiion of the lower one, but at the height of the top one
07:54 PM rue_shop3: if you did a line up from the bottom and across from the top, where they intersect looks like where it landed
07:54 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle4.JPG
07:54 PM rue_shop3: bbuttt
07:54 PM Tom_L: the slot location look ok?
07:54 PM rue_shop3: wait
07:54 PM rue_shop3: the slot is too far back somehow
07:54 PM Tom_L: and i added the A9 mount hole
07:54 PM Tom_L: i can move the slot
07:54 PM Tom_L: to align with the rectangular hole?
07:54 PM rue_shop3: the slot should be a lot forward
07:55 PM Tom_L: what about the A9 mount hole?
07:55 PM rue_shop3: I can give ya the broken (cant modify) B2 model
07:55 PM Tom_L: sw?
07:55 PM rue_shop3: the hole looks right
07:55 PM rue_shop3: no, there is no sw for B2
07:55 PM Tom_L: if i move the slot, it will miss A9
07:55 PM rue_shop3: I merged it from two stls
07:55 PM Tom_L: let's just work with this then until it's fixed
07:56 PM Tom_L: move the top hole back vertical to the bottom one?
07:56 PM rue_shop3: you might be able to overlap it to compare
07:56 PM rue_shop3: its a broken model that I just cant modify
07:56 PM Tom_L: it screws things up too much
07:56 PM Tom_L: i'm just adding the features then we can position them
07:56 PM rue_shop3: I just made another 6 tubes
07:57 PM rue_shop3: I do not have dimentiosn
07:57 PM Tom_L: if you can work with me a bit i can fix this pretty quick
07:57 PM rue_shop3: it was just made as a woogly copy of the orig
07:57 PM rue_shop3: well what info can I try to give you?
07:58 PM Tom_L: the 6mm hole location for starters
07:58 PM Tom_L: for the trigger
07:58 PM rue_shop3: ok
07:58 PM Tom_L: i know the bottom one is wrong but that was the original
07:58 PM Tom_L: for A2
07:58 PM rue_shop3: its centered about 5mm down from the flat edge
07:58 PM rue_shop3: on b2
07:59 PM Tom_L: yessir we are fixing B2
07:59 PM rue_shop3: and centered about 20mm from the back of the slot that A9 fits into
08:00 PM Tom_L: ok 5mm down
08:00 PM Tom_L: we need to fix the slot next
08:00 PM rue_shop3: :S
08:00 PM Tom_L: then i can move the hole horizontally
08:00 PM rue_shop3: the slot goes back about 47mm from the front
08:01 PM rue_shop3: about 32mm from the back
08:01 PM Tom_L: it's 47 from the front
08:01 PM rue_shop3: k
08:02 PM Tom_L: lemme double check that
08:02 PM Tom_L: 46.3
08:02 PM Tom_L: well no it's 47
08:03 PM Tom_L: hard to measure to a radius edge
08:03 PM Tom_L: so the whole thing needs to move forware to blend with the slot
08:03 PM Tom_L: is that right?
08:10 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top_slot.JPG
08:10 PM Tom_L: is that better on the slot?
08:10 PM Tom_L: the A9 slot
08:28 PM rue_mohr: that top is overhanging too far, I'll get you a number, just helping ma install a light
08:28 PM Tom_L: i'm fixing a problem
09:03 PM Tom_L: so i just lost all my work
09:15 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top_slot.JPG
09:15 PM Tom_L: ok
09:15 PM Tom_L: now we can move things as needed
09:17 PM rue_mohr: !!
09:18 PM Tom_L: i fixed it
09:18 PM rue_mohr: slot is too far back for sure
09:18 PM Tom_L: which slot?
09:18 PM Tom_L: it should go further back than the vertical slot
09:19 PM Tom_L: so the A9 slot aligns with it
09:29 PM Tom_L: fillets aren't working like they should now
09:38 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle5.JPG
09:38 PM Tom_L: ok that's what i have now
09:39 PM Tom_L: with the extra original A2 hole where it was
09:39 PM Tom_L: i need to edit those splines on the front and make them arcs to be able to fillet there
09:40 PM Tom_L: but i didn't know what size arcs they were so i 'traced' them from your stl file
09:56 PM rue_shop3: arg I need to work on my tings for a while, I went back to spraryer stuff
09:56 PM rue_shop3: just a sec
09:57 PM rue_shop3: the slot for the trigger/lever should go from about 15mm from the nose to 42mm from the nose
09:57 PM rue_shop3: the slot for A9 should be 6mm deep
09:58 PM rue_shop3: it was a sunny day, I got a lot done
09:58 PM rue_shop3: weeded out a bunch of bad battiers form my collection too
10:25 PM rue_shop3: the corner rouding is cosmetic and ergonomiclly driven
10:26 PM rue_shop3: it looks close!
10:38 PM Tom_L: yeah i quit on it for today but i'll pick it up again
10:43 PM Tom_L: i used the original lever slot
10:44 PM Tom_L: the A9 slot is 6.7mm deep right now
11:00 PM Tom_L: ok slot is 15mm from the front and 47 to the back on the A9 seating plane
11:06 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top_slot.JPG
11:06 PM rue_mohr: I can forward you the B2 to compare
11:07 PM Tom_L: now to get the 6mm hole location
11:07 PM Tom_L: and the A9 hole
11:07 PM rue_mohr: I think there was a bunch of interesting things that went down and I dont remembner
11:07 PM Tom_L: i can shoot a stl once we move the holes
11:08 PM Tom_L: and i need the dimensions for the nut slot
11:09 PM Tom_L: the pivot hole is 5mm from the A9 seating plane
11:09 PM Tom_L: i need the front to back dimension for it
11:09 PM rue_mohr: the hole
11:10 PM Tom_L: yes the hole center front to back
11:10 PM Tom_L: for the trigger
11:10 PM rue_mohr: and centered about 20mm from the back of the slot that A9 fits into
11:11 PM rue_mohr: oh wait
11:12 PM rue_mohr: the nut is
11:12 PM Tom_L: i need the 6mm hole first
11:12 PM Tom_L: 20mm from the back of the A9 slot?
11:13 PM rue_mohr: ok, the
11:13 PM rue_mohr: I have to finish supper and go back to the shop with a ruler
11:15 PM rue_mohr: * the nut slot is arg
11:16 PM rue_shop3: the 6mm hole is about 28mm from the front
11:18 PM rue_shop3: the nut slot is 3.5mm wide 12mm long, rounded with D=3.5mm
11:18 PM rue_shop3: and 12mm deep
11:20 PM Tom_L: 12mm???
11:20 PM Tom_L: ok
11:21 PM Tom_L: one more hole
11:21 PM Tom_L: the locator hole for A9 flange
11:21 PM Tom_L: the tiny hole
11:30 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle5.JPG
11:30 PM Tom_L: that slot looks kinda big
11:30 PM Tom_L: but that's what you said
11:30 PM Tom_L: all i need now is to verify that and get the small hole location and diameter
11:30 PM rue_shop3: thats complex
11:30 PM rue_shop3: we been trying to remove it, but we cant really
11:30 PM Tom_L: no it's just 2 dimensions :)
11:30 PM Tom_L: does that slot look right?
11:30 PM rue_shop3: so its 4mm down from the flat
11:33 PM rue_shop3: oh, yea
11:33 PM rue_shop3: clear hole for a #8 machine screw
11:33 PM Tom_L: i think that slot may be a little close to the front
11:34 PM Tom_L: one sec..
11:34 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top_slot1.JPG
11:36 PM Tom_L: i'm gonna back it of a couple mm
11:36 PM rue_shop3: its not stright down
11:36 PM rue_shop3: its slanted
11:36 PM Tom_L: the back is slanted the front is straight
11:36 PM rue_shop3: at the bottom its about 26mm from the front
11:36 PM rue_shop3: front is slanted too
11:37 PM Tom_L: not on A2 :)
11:37 PM rue_shop3: on B2 its slanted :)
11:37 PM Tom_L: about the same angle as the back?
11:37 PM rue_shop3: yea, I was surprised when I was redoing A7 and noticed the slot is parallel
11:37 PM rue_shop3: see if you can do about 26mm from the front
11:38 PM rue_shop3: it shoud clear the wiggles
11:38 PM rue_shop3: huh, we have 16 cast triggers left
11:39 PM rue_shop3: I need to make a new ladel :)
11:39 PM rue_shop3: if its nice out tommorow, that might be a fine welding project
11:43 PM rue_shop3: where is my tea, and some music
11:43 PM rue_shop3: I should fix up the mowerbot
11:44 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top_slot1.JPG
11:44 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top_slot2.JPG
11:45 PM Tom_L: 74.5 deg
11:45 PM Tom_L: parallel slot
11:47 PM Tom_L: 4.49mm on that top hole
11:49 PM rue_mohr: that looks about right
11:49 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_handle.STL
11:49 PM rue_mohr: so, there is something else odd
11:49 PM rue_mohr: the top is too thick(?)
11:49 PM Tom_L: wide?
11:50 PM Tom_L: 15mm
11:50 PM rue_mohr: high
11:50 PM Tom_L: that's left from A2
11:50 PM rue_mohr: the radius should come in at the top of the slot
11:50 PM rue_mohr: odd
11:50 PM Tom_L: ok
11:53 PM Tom_L: how far down?
11:54 PM rue_mohr: the inner radius of the pipe meets up with the corner of A9 and that top edge
11:54 PM rue_mohr: A9 is 3mm thick
11:55 PM rue_mohr: so it should radius in
11:57 PM Tom_L: one sec
11:59 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/B2_proto/B2_proto_top.JPG
11:59 PM rue_mohr: the smaller fillet can go away if you like
11:59 PM Tom_L: on that top edge?
11:59 PM rue_mohr: yea, the inner pipe radius is 22mm