#garfield Logs

Mar 02 2022

04:49 AM Tom_L: morning
06:51 AM rue_bed: hmm
09:32 AM rue_mohr: well, off to work
06:03 PM Tom_L: https://www.youtube.com/watch?v=GjvlIjr4xck
06:26 PM skunkworks: Tom_L: cool - what are those for?
06:26 PM Tom_L: don't mind the extra parts hangin on to it http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/Can_holder_assy.jpg
06:27 PM Tom_L: forest industry for marking trees
06:27 PM Tom_L: it's rue's project
06:27 PM Tom_L: i'm just helping out a bit
06:28 PM skunkworks: Ah - neat!
06:28 PM skunkworks: I thought it might be a rubber band gun ;)
06:28 PM Tom_L: he makes several lengths
06:28 PM Tom_L: just takes a while for him to make the parts
06:29 PM skunkworks: holds a paint can?
06:29 PM Tom_L: yes
06:29 PM Tom_L: the clip release was what i was making
06:29 PM skunkworks: Very cool
06:30 PM Tom_L: made a few of the can holders before the latch
06:31 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/A9_New/MODS/A9_A10_1st_batch.jpg
06:31 PM Tom_L: he cuts them apart
06:34 PM Tom_L: he sent me a kit so i knew what they went on
07:09 PM rue_shop3: hi tom, me and sean here
07:09 PM rue_shop3: you there?
07:13 PM Tom_L: yup
07:13 PM Tom_L: you see the yt?
07:13 PM Tom_L: mostly did that so you could see how i do them
07:16 PM Tom_L: finished all but the short blocks
07:16 PM Tom_L: i'll clean them up one at a time and try to run them
07:19 PM aandrew: man I am like burned out today. I don't wnt to work or do anything, just sit in a dark room for a while in silence
07:21 PM rue_shop3: hi
07:22 PM rue_shop3: what yt?
07:22 PM Tom_L: the one i posted above
07:24 PM rue_shop3: watching video
07:24 PM Tom_L: i took a pass out of the woodruff cutter so there's 2 instead of 3 and that cut a min off the time
07:24 PM Tom_L: 9 min
07:27 PM rue_shop3: thanks
07:29 PM rue_shop3: hahah sean says whole sh**
07:29 PM Tom_L: heh
07:30 PM Tom_L: end up with a finished part
07:30 PM Tom_L: should still be tumbled
07:31 PM rue_shop3: sean likes having the head holes drilled A9/10
07:32 PM Tom_L: well hopefully now they're the right size
07:45 PM rue_shop3: how much $ do you want for all those
07:46 PM Tom_L: hell if i know
07:46 PM Tom_L: i gotta find out about shipping
07:46 PM Tom_L: may take a day or two
07:46 PM Tom_L: i'm out of town tomorrow
07:47 PM Tom_L: A9 i said material was $.65ea and i didn't figure the A12
07:47 PM Tom_L: no idea
07:51 PM rue_shop3: Sean here, much thanks e-transfer ok when time comes
07:59 PM Tom_L: rue uses paypal
07:59 PM Tom_L: usually
08:04 PM rue_shop2: yea we can do paypal :) (rue here)
08:06 PM Tom_L: rue_shop2,
08:06 PM Tom_L: how much copper do you want?
08:07 PM Tom_L: you said you were running low on it
08:08 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/etching/Copper2.jpg
08:08 PM Tom_L: doubt you'd wanna pay shipping on all that
08:09 PM Tom_L: i'll probably cut them down to a shippable size
08:09 PM Tom_L: and you can have as much as you want to pay shipping on
08:09 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/etching/Copper1.jpg
08:10 PM Tom_L: the short ones look like roughly 16-18"
08:10 PM Tom_L: but i'll have to cut them up to ship
08:10 PM Tom_L: length judging by the studs in the wall :)
09:14 PM rue_shop3: its rue, Im back]
09:28 PM Tom_L: so
09:28 PM Tom_L: how much copper should i cut up for you?
09:28 PM Tom_L: i still have 6-8 parts i'm gonna try to salvage
09:43 PM rue_mohr: oo
09:43 PM rue_mohr: uh, I'm not sure! much! :)
09:44 PM rue_mohr: :) all
09:44 PM rue_mohr: hah
09:44 PM Tom_L: cost will be shipping so i can send as much as you want
09:44 PM Tom_L: i don't think they would accept 'all'
09:44 PM Tom_L: weighs too much
09:45 PM Tom_L: i haven't sent any thing in such a while, i'm not sure if they go by size or weight or both
09:46 PM Tom_L: i'll never use it
09:55 PM rue_mohr: I know
09:55 PM rue_mohr: want to see what the weight tiers are?
09:56 PM rue_mohr: I think that if you ask, for a given size box, its all the same up to a weight limit
09:56 PM Tom_L: i'll find a box in the next few days and see
09:57 PM Tom_L: company next couple days so i won't get much done
09:57 PM Tom_L: anything else on the grocery list?
10:15 PM rue_mohr: hah
10:15 PM rue_mohr: today I found out canada has no plated 1/4" bar
10:16 PM rue_mohr: were trying to get some for the pins
10:16 PM rue_mohr: so I'm going to other things, were going to see if we can get aluminim bar
10:16 PM rue_mohr: but no, that'll be a heavy box enough as is
10:16 PM rue_mohr: :)
10:16 PM rue_mohr: thanks
10:17 PM Tom_L: pop rivet shanks
10:18 PM Tom_L: oh.. 1/4" nevermind
10:19 PM Tom_L: this is the 15mm long part we went on a hunt for
10:21 PM rue_bed: 1/4" by 15mm :)
10:21 PM rue_bed: were working on it, were not stuck
10:21 PM rue_bed: yet
10:21 PM rue_bed: I had a piece in my person stock we used
10:21 PM rue_bed: personal
10:24 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/local_stock/18.jpg
10:24 PM Tom_L: i dunno what size that wirey lookin stuff is
10:25 PM Tom_L: it may be larger than 1/4
10:25 PM Tom_L: looking closer,that looks like tubing
10:26 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/local_stock/9.jpg
10:26 PM Tom_L: you could turn that down to size
10:26 PM Tom_L: :)
10:34 PM rue_bed: way too much work
10:34 PM rue_bed: the previous fellow used 1/4" copper pipe
10:34 PM rue_bed: apparently its 66c/inch here now
10:35 PM rue_bed: so about 44c ea
10:39 PM Tom_L: isn't copper water pipe different size than refrigeration copper?
10:41 PM Tom_L: enough for one day...
10:41 PM Tom_L: gnite