#garfield Logs

Jun 05 2021

06:40 AM polprog: https://www.youtube.com/watch?v=SfjcUUpXUlk
06:47 AM polprog: good jazz, and making engines
06:47 AM polprog: former warsaw factory
11:12 AM rue_mohr: wow, all under 1 roof, they dont do that anymore
12:27 PM rue_mohr: hey wait
12:28 PM rue_mohr: https://elinux.org/Display_Jbox
12:28 PM rue_mohr: when did they update that to day libera.chat?
12:45 PM rue_mohr: https://polprog.net/rozne1/ircjunk/xerox_lcd/notes.txt
12:49 PM rue_mohr: :S looks like I just accidently closed a wrong window, and nothing seems to be missing
12:50 PM rue_mohr: ok I need to make a former for winding this coil...
12:57 PM Tom_L: so
12:57 PM Tom_L: mr sparkie
12:57 PM Tom_L: why are electrical wires round instead of flat?
12:58 PM Tom_L: or rectangular i should say
12:58 PM Tom_L: i suppose no sharp edges would be one reason
01:03 PM rue_mohr: I dont think rectanglar wires would bend nicely
01:03 PM rue_mohr: like, repeatedly
01:03 PM rue_mohr: its ok, their still measured in square mil
01:03 PM rue_mohr: imperial mil
01:22 PM Tom_L: :)
01:30 PM rue_mohr: its funny,they converted the whole electrical code over to metric, the the wire size is still imperial
03:54 PM Tom_L: so i shifted P2 program a bit and got rid of most of the seam: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/A3/New/A3_1a.jpg
03:54 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/A3/New/A3_2a.jpg
03:55 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/A3/New/A3_3a.jpg
03:55 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/rue/Can_Holder/A3/New/A3_4a.jpg
03:55 PM Tom_L: and the radius is better too
03:55 PM Tom_L: that's no mods from pulling from the cnc
03:56 PM Tom_L: the seam is ~.001" still but a good tumble or hit with paper will take that right out
03:59 PM rue_shop5: wow
03:59 PM rue_shop5: thats as rounded as the cast ones!
03:59 PM Tom_L: it's pretty close
04:00 PM Tom_L: 1/16" radius
04:00 PM rue_shop5: :/ it sounds like a drive died in the jukebox
04:00 PM rue_shop5: damnit
04:01 PM Tom_L: AGAIN!
04:01 PM rue_shop5: that thing is going thru a LOT of hardware since I upgraded it from the P1-100
04:02 PM rue_shop5: it was cooking last time so I just left it off to cool till now
04:03 PM rue_shop5: I think I did it up on raid 1
04:03 PM rue_shop5: so I should be able to switch the drives and get it back up
04:03 PM rue_shop5: which I am not doing right now
04:03 PM rue_shop5: I'm doing other projects
04:06 PM Tom_L: what you workin on today?
04:07 PM rue_shop5: oh I wanted ot pos you a link
04:07 PM rue_shop5: there is a
04:08 PM rue_shop5: https://www.researchgate.net/publication/262288850_Traxion_A_tactile_interaction_device_with_virtual_force_sensation
04:08 PM rue_shop5: find antoher link 1 min
04:08 PM rue_shop5: https://lab.rekimoto.org/projects/traxion/
04:08 PM rue_shop5: there
04:08 PM rue_shop5: so, I'm workin on making one to play with
04:09 PM Tom_L: what's it use for the force feedback?
04:09 PM rue_shop5: yea
04:18 PM Tom_L: what was that memory wire....
04:18 PM Tom_L: when charged it bent..
04:18 PM Tom_L: i bet it's something like that or a piezo of sorts
04:26 PM Tom_L: so these logitech devices with the usb dongle, the mouse doesn't work well with a keyboard attached to the same dongle
04:36 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/cutters/ZRN_Alum_3flute2.jpg
04:37 PM Tom_L: tried those on that part, they work better than anything else i have
05:31 PM rue_shop5: were those the really high material removal ones?
05:32 PM Tom_L: for aluminum yes
05:32 PM Tom_L: or finish, either one
05:32 PM Tom_L: that rougher was really made for high material removal
05:33 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/cutters/Carbide_rougher2.jpg
05:33 PM Tom_L: that
05:33 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/cutters/Carbide_rougher4.jpg
05:33 PM Tom_L: it just looks mean
05:45 PM rue_mohr: ah yea ok