#garfield Logs

Jun 05 2020

07:03 AM polprog: rue_shop2: whats that 000 on the left of the display indicate?
07:49 AM polprog: rue_shop2: https://elly.town/p/small/ed3.c
07:49 AM polprog: 505 loc
07:49 AM polprog: A curses-based visual editor. Arrow keys for movement, C-x to enter a command; commands are: f(ind text) q(uit) r(ead file) s(set) w(rite file) w(rite then )q(uit). Commands are first read from $HOME/.ed3rc on startup.
08:29 AM rue_bed: interesting
11:11 AM aandrew: that's impressive
11:45 AM polprog: havent compiled it yet, i have a ton of work to do
07:13 PM rue_mohr: I need to do a full-bank relay test
08:14 PM aandrew: so do it
08:15 PM aandrew: I wonder if I'll hear the clacking all the way over here in Ontario :-)
08:15 PM aandrew: 70% humidity outside right now, crazy
08:28 PM rue_mohr: I"v had them all switch so far, but not when their supposed to
08:28 PM rue_mohr: funny enough, the power supply doesn't mind me using a fet to switch 12V into the 5V charged caps 1200uF
08:29 PM rue_mohr: the fet doesn't get warn either
08:29 PM rue_mohr: the caps were sized for a steady 12V supply
08:29 PM rue_mohr: I'd not come up with the switched voltage idea
09:04 PM Tom_L: ping
10:01 PM rue_mohr: pang
10:09 PM Tom_L: rue_mohr,
10:09 PM rue_bed: y
10:09 PM Tom_L: z's here if you need him to see a link now
10:09 PM rue_bed: did n't he get it?
10:09 PM rue_bed: I odnt have the link
10:10 PM Tom_L: i think it was too hot out there for the mill today
10:10 PM rue_bed: did you say that yesterday
10:10 PM Tom_L: at one point the pc even locked up
10:10 PM rue_bed: >?
10:10 PM Tom_L: whenever it was
10:10 PM Tom_L: i ran another side of the part this evening
10:11 PM Tom_L: the pc locked up, no kbd or mouse control then it came back
10:11 PM Tom_L: go figure
10:11 PM rue_bed: k
10:11 PM Tom_L: heat?
10:11 PM rue_bed: dunon
10:12 PM Tom_L: 1st time ever it's given me any grief
10:12 PM rue_bed: k
10:12 PM rue_bed: neeed to work out how to stay awake
10:12 PM Tom_L: i may go out early before the sun comes up and run it a bit
10:12 PM rue_bed: so much time lost sleeping
10:13 PM Tom_L: do you have climate control in your shop?
10:13 PM rue_bed: no
10:13 PM rue_bed: shop is good tho
10:13 PM Tom_L: i used to have an ac in there
10:13 PM Tom_L: i may see about adding one again
10:13 PM Tom_L: if i keep using the mill much
10:14 PM rue_bed: want a cnc challange?
10:14 PM rue_bed: I cant 3d print it
10:14 PM rue_bed: too small
10:15 PM Tom_L: let
10:15 PM Tom_L: s see it
10:15 PM Tom_L: why can't you print it?
10:15 PM rue_bed: plasic spline coupler for dewalt cutter
10:15 PM rue_bed: its too thin
10:15 PM Tom_L: i dunno about doing splines
10:15 PM Tom_L: pic
10:15 PM rue_bed: I'll post the 3d
10:15 PM rue_bed: er
10:15 PM rue_bed: I'll post the 2d
10:15 PM rue_bed: and show pics
10:15 PM rue_bed: but I cant now
10:16 PM Tom_L: sure you can
10:16 PM Tom_L: wake up
10:16 PM rue_bed: I'd be more awake if I were tranqued
10:16 PM rue_bed: (from normal)
10:17 PM Tom_L: what's it couple together?
10:17 PM rue_bed: control gain to muscles is really low, sloppy feedback
10:17 PM rue_bed: a motor to a saw vibrating head
10:17 PM rue_bed: its a 6 point round wiggle
10:19 PM rue_bed: cordless
10:19 PM Tom_L: funny, the spindle motor wasn't the problem this round
10:19 PM rue_bed: big name
10:20 PM rue_bed: d* but now dewalt
10:20 PM rue_bed: or bosch
10:20 PM Tom_L: i had the cooler goin on it and filled a 5gal pail with ice water
10:20 PM Tom_L: milwakee?
10:20 PM Tom_L: riobi
10:21 PM Tom_L: black n decker
10:26 PM rue_bed: damnit google is pissing me off
10:31 PM rue_bed: itsw bosch
10:31 PM rue_bed: google is f*** useless
10:31 PM rue_bed: it wont search for hte words I put in
10:45 PM rue_bed: there are no online images of the part
11:01 PM rue_mohr: come to think of it, the ASA did a better job of keeping me awake
11:07 PM rue_mohr: http://ruemohr.org/~ircjunk/tempimage/p1160350.jpg
11:08 PM rue_mohr: the far left is the orig (broken)
11:08 PM rue_mohr: the right two are my attempts to 3d print
11:08 PM rue_mohr: but their too thick
11:08 PM rue_mohr: and when I got it to what should be right, the printer couldn't do it
11:08 PM rue_mohr: it started skipping parts that were too thin
11:09 PM rue_mohr: but it could be milled
11:09 PM rue_mohr: I'd compensated the shape for the printer
11:09 PM rue_mohr: so I'd need to make an uncompensated design
11:09 PM rue_mohr: which I can do later
11:09 PM rue_mohr: but thats it
11:09 PM rue_mohr: a bossch cordless oscillatoing saw drive coupler spline
11:22 PM rue_mohr: MoonyMoon, http://www.kiblerelectronics.com/bob/app_notes/note11/images/schematic1_zvs_driver.png
11:28 PM rue_mohr: polprog, are you awake yet?
11:48 PM polprog: yeah, i am
11:50 PM polprog: rue_mohr: