#garfield Logs

Nov 23 2019

04:05 AM rue_mohr: I'm actaully not sure which liscence to get
04:10 AM rue_mohr: is the eval time limited?
06:11 AM Tom_L: <Tom_L> you want ISE Webpack Lincense
06:12 AM Tom_L: no time limit
06:14 AM rue_mohr: I got it
06:15 AM rue_mohr: it sure would be nice if the counter on the stm32 could be 32 bits
06:16 AM rue_mohr: this thing is crazy tho, I wonder if I can slave a timer off the overflow event
06:26 AM Tom_L: get webpack installed?
06:34 AM rue_mohr: not yet, coding
06:34 AM rue_mohr: y, its 4:30am
06:34 AM Tom_L: carry on
06:34 AM rue_mohr: duty = ((L1C-H0C)*100/(H1C-H0C));
06:35 AM rue_mohr: why should I use 100 for the duty, i dont HAVE to be using percent
06:35 AM rue_mohr: I could use 128 or 256
06:36 AM Tom_L: or 65535
06:37 AM rue_mohr: bit high
06:37 AM Tom_L: i forget what the timers were on the 68332
06:37 AM rue_mohr: I'm masuring pulse duty
06:37 AM rue_mohr: and period
06:38 AM rue_mohr: down to 1hz
06:38 AM rue_mohr: the 32bits I'm using takes me down to a 49sec rollover
06:38 AM rue_mohr: hmm, ya know
06:40 AM rue_mohr: er 59sec
06:41 AM rue_mohr: hmm
06:41 AM rue_mohr: 1 second is
06:42 AM rue_mohr: 0x44AA200
06:42 AM rue_mohr: 27 bits
06:43 AM rue_mohr: hmm
06:43 AM rue_mohr: so technically I'm gonna rollover if I multiply by more than 5
11:09 AM Tom_L: progress.
12:26 PM zhanx: rue_mohr, you up?
12:29 PM zhanx: https://imgur.com/a/qKgEgqw
12:29 PM zhanx: cement auger parts
12:31 PM rue_mohr: yup
12:32 PM rue_mohr: hmm, interseting
12:33 PM rue_mohr: your mixing the water in at the deposition point aren't you?>
12:56 PM jymmmm: Tom_L: https://i.imgur.com/ltG2LuZ.jpg
01:04 PM zhanx: yep
01:04 PM zhanx: rue_mohr, will have 4 parts to the mixture
01:05 PM zhanx: test printing auger now for size, then I will be casting them
01:15 PM zhanx: forgot to add the hole to the center of the auger for the test print oopps
02:01 PM rue_mohr: jymmmm, damn, I'll be able to hear that from here
02:03 PM jymmmm: rue_mohr: Surprsingly, it's actuall not all that loud or annoying
02:05 PM rue_mohr: mhm
02:08 PM jymmmm: I never realize how BIG 15L capacity really is, lol
04:29 PM zhanx: https://imgur.com/a/kg6VXmx <- funnels
04:43 PM rue_mohr: oof your machine needs adjusting
04:43 PM rue_mohr: the nozzel size is set too big
04:44 PM rue_mohr: (its spacing the traces too much)
04:54 PM rue_mohr: 3 second power outage...
04:54 PM rue_mohr: that'll screw a bunch of stuff up
05:02 PM zhanx: let me check the slic3r, i have it running full speed
05:03 PM zhanx: its at 1.75
05:03 PM zhanx: extrusion multi at .75
05:05 PM zhanx: wait the nozzle is at .5mm
05:06 PM zhanx: fixed it
09:35 PM Tom_L: rue_shop2
09:36 PM Tom_L: get anywhere with xilinx?
10:05 PM zhanx: had fun tracking a deer for 2 hours
10:05 PM zhanx: neighbor shot it, lost, i tracked it about 700 yards and found it
10:06 PM zhanx: and main auger print finished, its sexy
10:06 PM zhanx: only 4 more to print to finish it
10:15 PM Tom_L: was the deer down or wounded?
10:16 PM zhanx: wounded, it was still alive when i found it
10:16 PM zhanx: i got it and 4 hogs i stumbled over in the dark
11:06 PM zhanx: think i should change up the motor mounts before i print them to take both nema 17 and 23