#garfield Logs

May 16 2018

12:37 AM zhanx: ok rue_mohr my bed is 1/4" plexi
12:40 AM zhanx: its 12x12 something i need to cut dowm
12:40 AM rue_mohr: ok
12:40 AM rue_mohr: you have a sub-bed?
12:40 AM zhanx: sorry that is the sub bed
12:40 AM zhanx: wrong term
12:40 AM rue_mohr: oh, thats large
12:40 AM zhanx: it was suppose to be a window i guess, it was 50 cents
12:40 AM rue_mohr: make sure you still have atleast 20cm (8") movement on Y
12:40 AM zhanx: i was thinking cut to width and cut to 6" ish on the y travel
12:40 AM rue_mohr: yup
12:40 AM zhanx: k
01:05 AM rue_mohr: the scanner glass I got was ok
01:05 AM rue_mohr: I think
01:05 AM rue_mohr: where did the camera go?
01:06 AM rue_mohr: 12.5cm Y
01:06 AM rue_mohr: by full width, about 23cm
01:09 AM rue_mohr: zhanx, the large printer:
01:10 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap2/p1100066.jpg
01:10 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap2/p1100065.jpg
01:10 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap2/p1100064.jpg
01:10 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap2/p1100063.jpg
01:10 AM rue_mohr: the bed on that one is about 26cm, iirc
01:11 AM rue_mohr: its what you get when you take the 3' rod and just cut it in half
01:11 AM rue_mohr: the 3rd printer, is normal size
01:12 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100075.jpg the ruler is up against the sub-bed, 12cm
01:12 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100074.jpg bed itself is 23.5 Y
01:13 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100073.jpg 23.5 X
01:13 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100072.jpg inline with sub-bed, so its 22 wide
01:14 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100071.jpg you can see how the bed laps over the rails, with sub-bed being short
01:15 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100068.jpg sub-bed 4.75" Y
01:15 AM rue_mohr: http://ruemohr.org/~ircjunk/projects/reprap3/p1100067.jpg overview
10:35 PM zhanx: rue_mohr: i made progress
10:35 PM zhanx: https://imgur.com/a/QzC5WUe
11:59 PM zhanx: rue_mohr: bed spacing for the top bed for 3 point?