#garfield Logs

Feb 06 2018

06:23 PM Tom_itx: rue_shop3, what rpm and feed do you use with an 1/8" or thereabouts cutter
06:26 PM Tom_itx: rue_shop3, tell rue_shop4 that rue_ should go wake up rue_bed
07:17 PM rue_: .25mm/pass 47mm/min about 6000 rpm
07:18 PM rue_: or did I bump it to 61mm/min
07:18 PM rue_: lets say 47
07:32 PM Tom_itx: i'm working on A9
07:33 PM zhanx: i am working on a headache
07:38 PM Tom_itx: z did you see the mill i made?
07:56 PM Tom_itx is now known as Tom_L
08:08 PM zhanx: parts of it, is it done
08:08 PM zhanx: ?
08:09 PM Tom_L: yeah
08:10 PM Tom_L: mostly
08:12 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/Mill_Steel/Assembly/Final/Mister1.jpg
08:12 PM Tom_L: http://tom-itx.no-ip.biz:81/~webpage/cnc/Mill_Steel/Assembly/Final/Chip_Guard2.jpg
08:14 PM zhanx: that is a mill for sure, what are you making on it?
08:15 PM Tom_L: testing junk for rue right now
08:16 PM Tom_L: still tweaking things like the coolant mister
08:17 PM Tom_L: the first couple parts are shit but it works
08:17 PM Tom_L: https://www.youtube.com/watch?v=jW6RluMbYBQ&feature=youtu.be
08:29 PM rue_: Tom_L, you could use some of that spiral wrap for the cables
08:31 PM Tom_L: yeah i just haven't had a chance to get any
08:32 PM rue_: I had challanges finding some
08:32 PM rue_: 55 things should be comming from china
08:32 PM rue_: about 50 of them should be here
08:32 PM rue_: hmmmmm
08:34 PM Tom_L: yeah, are you still doing that kids class?
08:34 PM rue_: there havn't been any kids
08:34 PM rue_: for a few years
08:34 PM rue_: maybe it goes in waves
08:35 PM rue_: to make it work, I need to get them helping me on my projects :/
08:42 PM Tom_L: rue
08:42 PM Tom_L: .91 deep grove?
08:44 PM rue_: I do NOT have that documented
08:44 PM rue_: it was a measure-on-request thing
08:45 PM rue_: .091" deep radius is .068
08:45 PM rue_: ******************************** .091" deep radius is .068 **********************************
08:46 PM rue_: that'll make it easier to find
08:46 PM Tom_L: well i'm trying to get it set for the 1/4" material
08:46 PM rue_: ah yes
08:46 PM Tom_L: with the end chopped off to 1/8"
08:46 PM rue_: ball nose on that curve?
08:49 PM Tom_L: yes
08:49 PM Tom_L: so if i add .125 + .091 that should be right for the .250 material
08:50 PM Tom_L: that leaves a .034" lip on the bottom
08:50 PM Tom_L: sound about right?
08:50 PM Tom_L: ... for the can grip
08:51 PM rue_: zippo:/tmp# calc 1/8
08:51 PM rue_: 1/8 -->> 0.125
08:51 PM rue_: zippo:/tmp# calc 0.125-0.091
08:51 PM rue_: 0.125-0.091 -->> 0.034
08:51 PM rue_: zippo:/tmp# calc .250-0.034
08:51 PM rue_: .250-0.034 -->> 0.216
08:51 PM Tom_L: yeah i'm goin for .215 though
08:52 PM rue_: so it seems off 1/4" material, you should be taking off 0.216
08:52 PM Tom_L: yeah i'm goin for .215 though
08:52 PM rue_: ok
08:53 PM rue_: I'm still about 30% asleep
08:53 PM Tom_L: i'm redoing it for a 1/8" cutter
08:53 PM Tom_L: except the ball mill
08:53 PM Tom_L: cause i don't have one that size
08:54 PM rue_: k
10:26 PM Tom_L: says it should take about 40 min to make A9
10:33 PM ASRock_pc: https://www.youtube.com/watch?v=8P56g9Z6X3U&feature=youtu.be
10:33 PM Tom_L: in 5 min
10:58 PM rue_shop3: heh
10:58 PM rue_shop3: it takes me 3 hrs
10:58 PM rue_shop3: well, with A10 attached
11:03 PM Tom_L: might try one tomorrow if i get time